MODULE_DEVICE_TABLE(pci, flexcop_pci_tbl);
static struct pci_driver flexcop_pci_driver = {
- .name = "Technisat/B2C2 FlexCop II/IIb PCI",
+ .name = "b2c2_flexcop_pci",
.id_table = flexcop_pci_tbl,
.probe = flexcop_pci_probe,
.remove = flexcop_pci_remove,
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver flexcop_usb_driver = {
.owner = THIS_MODULE,
- .name = "Technisat/B2C2 FlexCop II/IIb/III USB",
+ .name = "b2c2_flexcop_usb",
.probe = flexcop_usb_probe,
.disconnect = flexcop_usb_disconnect,
.id_table = flexcop_usb_table,
static struct usb_driver a800_driver = {
.owner = THIS_MODULE,
- .name = "AVerMedia AverTV DVB-T USB 2.0 (A800)",
+ .name = "dvb_usb_a800",
.probe = a800_probe,
.disconnect = dvb_usb_device_exit,
.id_table = a800_table,
static struct usb_driver cxusb_driver = {
.owner = THIS_MODULE,
- .name = "cxusb",
+ .name = "dvb_usb_cxusb",
.probe = cxusb_probe,
.disconnect = dvb_usb_device_exit,
.id_table = cxusb_table,
static struct usb_driver dibusb_driver = {
.owner = THIS_MODULE,
- .name = "DiBcom based USB DVB-T devices (DiB3000M-B based)",
+ .name = "dvb_usb_dibusb_mb",
.probe = dibusb_probe,
.disconnect = dvb_usb_device_exit,
.id_table = dibusb_dib3000mb_table,
static struct usb_driver dibusb_mc_driver = {
.owner = THIS_MODULE,
- .name = "DiBcom based USB2.0 DVB-T (DiB3000M-C/P based) devices",
+ .name = "dvb_usb_dibusb_mc",
.probe = dibusb_mc_probe,
.disconnect = dvb_usb_device_exit,
.id_table = dibusb_dib3000mc_table,
static struct usb_driver digitv_driver = {
.owner = THIS_MODULE,
- .name = "Nebula Electronics uDigiTV DVB-T USB2.0 device",
+ .name = "dvb_usb_digitv",
.probe = digitv_probe,
.disconnect = dvb_usb_device_exit,
.id_table = digitv_table,
static struct usb_driver nova_t_driver = {
.owner = THIS_MODULE,
- .name = "Hauppauge WinTV-NOVA-T usb2",
+ .name = "dvb_usb_nova_t_usb2",
.probe = nova_t_probe,
.disconnect = dvb_usb_device_exit,
.id_table = nova_t_table,
static struct usb_driver umt_driver = {
.owner = THIS_MODULE,
- .name = "HanfTek UMT-010 USB2.0 DVB-T devices",
+ .name = "dvb_usb_umt_010",
.probe = umt_probe,
.disconnect = dvb_usb_device_exit,
.id_table = umt_table,
if (usb_control_msg(d->udev,
usb_sndctrlpipe(d->udev,0),
TH_COMMAND_OUT, USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0,
- outbuf, 20, 2*HZ) != 20) {
+ outbuf, 20, 2000) != 20) {
err("USB control message 'out' went wrong.");
ret = -EIO;
goto unlock;
if (usb_control_msg(d->udev,
usb_rcvctrlpipe(d->udev,0),
TH_COMMAND_IN, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
- inbuf, 12, 2*HZ) != 12) {
+ inbuf, 12, 2000) != 12) {
err("USB control message 'in' went wrong.");
ret = -EIO;
goto unlock;
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver vp7045_usb_driver = {
.owner = THIS_MODULE,
- .name = "dvb-usb-vp7045",
+ .name = "dvb_usb_vp7045",
.probe = vp7045_usb_probe,
.disconnect = dvb_usb_device_exit,
.id_table = vp7045_usb_table,