ramips: add support for YunCore G720

The YunCore G720 is a dual band 802.11ax router with 5 GbE ports.

Specs:
- SoC: MediaTek MT7621
- Ethernet: 5x GbE ports (built-in MT7530)
- Wireless 2.4GHz / 5GHz: MediaTek MT7915E
- RAM: 256MiB
- ROM: 16MiB (W25Q128)
- 1 Button (reset)
- 8 LEDs (1x system, 2x wifi, 5x switch ports)

Flash instructions:
The vendor firmware is based on OpenWrt, the sysupgrade image can be
flashed using the '-F' (force) option on the CLI.
Make sure not to keep settings when doing so.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 65df33fc76f722701f161dd88828f61c9e31f1d1)

diff --git a/target/linux/ramips/dts/mt7621_yuncore_g720.dts b/target/linux/ramips/dts/mt7621_yuncore_g720.dts
new file mode 100644 (file)
index 0000000..4b88064
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_yuncore_g720.dts
@@ -0,0 +1,188 @@
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7621.dtsi"
+
+/ {
+       compatible = "yuncore,g720", "mediatek,mt7621-soc";
+       model = "YunCore G720";
+
+       aliases {
+               label-mac-device = &wifi0;
+               led-boot = &led_sys_red;
+               led-failsafe = &led_sys_red;
+               led-running = &led_sys_red;
+               led-upgrade = &led_sys_red;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_sys_red: led-sys {
+                       color = <LED_COLOR_ID_RED>;
+                       function = LED_FUNCTION_STATUS;
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       watchdog {
+               compatible = "linux,wdt-gpio";
+               gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+               hw_algo = "toggle";
+               hw_margin_ms = <200>;
+               always-running;
+       };
+};
+
+&gpio {
+       s1 {
+               gpio-hog;
+               line-name = "s1";
+               gpios = <4 GPIO_ACTIVE_LOW>;
+               output-high;
+       };
+
+       s2 {
+               gpio-hog;
+               line-name = "s2";
+               gpios = <3 GPIO_ACTIVE_LOW>;
+               output-high;
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "w25q128", "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "factory";
+                               reg = <0x50000 0x40000>;
+                               read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0xe00>;
+                                       };
+
+                                       macaddr_factory_e000: macaddr@e000 {
+                                               reg = <0xe000 0x6>;
+                                       };
+
+                                       macaddr_factory_e006: macaddr@e006 {
+                                               reg = <0xe006 0x6>;
+                                       };
+                               };
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x90000 0xf70000>;
+                       };
+               };
+       };
+};
+
+&gmac0 {
+       nvmem-cells = <&macaddr_factory_e000>;
+       nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+       status = "okay";
+       label = "wan";
+       phy-handle = <&ethphy4>;
+
+       nvmem-cells = <&macaddr_factory_e006>;
+       nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+       ethphy4: ethernet-phy@4 {
+               reg = <4>;
+       };
+};
+
+&switch0 {
+       ports {
+               port@0 {
+                       status = "okay";
+                       label = "lan1";
+               };
+
+               port@1 {
+                       status = "okay";
+                       label = "lan2";
+               };
+
+               port@2 {
+                       status = "okay";
+                       label = "lan3";
+               };
+
+               port@3 {
+                       status = "okay";
+                       label = "lan4";
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie1 {
+       wifi0: wifi@0,0 {
+               compatible = "mediatek,mt76";
+               reg = <0x0000 0 0 0 0>;
+               nvmem-cells = <&eeprom_factory_0>;
+               nvmem-cell-names = "eeprom";
+       };
+};
+
+&state_default {
+       gpio {
+               groups = "jtag", "wdt";
+               function = "gpio";
+       };
+};

diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 6b869f95948524cb5a1d4afb6dddee14e021215d..2800eea6819dd01d5e86c025e5a1ac5ec09e376a 100644 (file)
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -2806,6 +2806,16 @@ define Device/yuncore_fap690
 endef
 TARGET_DEVICES += yuncore_fap690
 
+define Device/yuncore_g720
+  $(Device/dsa-migration)
+  DEVICE_VENDOR := YunCore
+  DEVICE_MODEL := G720
+  DEVICE_PACKAGES := kmod-mt7915-firmware
+  IMAGE_SIZE := 15808k
+  SUPPORTED_DEVICES += mt7621-rfb-ax-nor
+endef
+TARGET_DEVICES += yuncore_g720
+
 define Device/zbtlink_zbt-we1326
   $(Device/dsa-migration)
   $(Device/uimage-lzma-loader)

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index db9c3f66e85c5b0ce422cdaefe6cbc84a4588eb9..a721833040b459fcae734dafbc7792f38b459fc7 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -30,7 +30,8 @@ asus,rt-ax53u)
        ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "mt76-phy0" "phy0tpt"
        ucidef_set_led_wlan "wlan5g" "WiFi 5GHz" "mt76-phy1" "phy1tpt"
        ;;
-asus,rt-ax54)
+asus,rt-ax54|\
+yuncore,g720)
        ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "mt76-phy0" "phy0tpt"
        ucidef_set_led_wlan "wlan5g" "WiFi 5GHz" "mt76-phy1" "phy1tpt"
        ;;

diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 6ab19b9e3c5117f82f55e4834547f3f450dc024c..353bd31233d0063a4a4a60330221210388a6a5f5 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -178,7 +178,8 @@ case "$board" in
                hw_mac_addr="$(mtd_get_mac_binary rom_file 0xf100)"
                [ "$PHYNBR" = "1" ] &&  macaddr_add "$hw_mac_addr" 2 > "/sys${DEVPATH}/macaddress"
                ;;
-       yuncore,ax820)
+       yuncore,ax820|\
+       yuncore,g720)
                [ "$PHYNBR" = "1" ] && \
                        macaddr_setbit_la "$(mtd_get_mac_binary Factory 0xe000)" > /sys${DEVPATH}/macaddress
                ;;