*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
for (i = 0; i < 3; i++)
phys_addr[i] = htons(read_eeprom(ioaddr, i + 10));
if (phys_addr[0] == htons(0x6060)) {
- printk(KERN_NOTICE "3c574_cs: IO port conflict at 0x%03lx"
- "-0x%03lx\n", dev->base_addr, dev->base_addr+15);
+ pr_notice("IO port conflict at 0x%03lx-0x%03lx\n",
+ dev->base_addr, dev->base_addr+15);
goto failed;
}
}
outw(2<<11, ioaddr + RunnerRdCtrl);
mcr = inb(ioaddr + 2);
outw(0<<11, ioaddr + RunnerRdCtrl);
- printk(KERN_INFO " ASIC rev %d,", mcr>>3);
+ pr_info(" ASIC rev %d,", mcr>>3);
EL3WINDOW(3);
config = inl(ioaddr + Wn3_Config);
lp->default_media = (config & Xcvr) >> Xcvr_shift;
}
}
if (phy > 32) {
- printk(KERN_NOTICE " No MII transceivers found!\n");
+ pr_notice(" No MII transceivers found!\n");
goto failed;
}
i = mdio_read(ioaddr, lp->phys, 16) | 0x40;
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
- printk(KERN_NOTICE "3c574_cs: register_netdev() failed\n");
+ pr_notice("register_netdev() failed\n");
goto failed;
}
- printk(KERN_INFO "%s: %s at io %#3lx, irq %d, "
- "hw_addr %pM.\n",
- dev->name, cardname, dev->base_addr, dev->irq,
- dev->dev_addr);
- printk(" %dK FIFO split %s Rx:Tx, %sMII interface.\n",
- 8 << config & Ram_size,
- ram_split[(config & Ram_split) >> Ram_split_shift],
- config & Autoselect ? "autoselect " : "");
+ netdev_info(dev, "%s at io %#3lx, irq %d, hw_addr %pM\n",
+ cardname, dev->base_addr, dev->irq, dev->dev_addr);
+ netdev_info(dev, " %dK FIFO split %s Rx:Tx, %sMII interface.\n",
+ 8 << config & Ram_size,
+ ram_split[(config & Ram_split) >> Ram_split_shift],
+ config & Autoselect ? "autoselect " : "");
return 0;
{
unsigned int ioaddr = dev->base_addr;
EL3WINDOW(1);
- printk(KERN_INFO " irq status %04x, rx status %04x, tx status "
- "%02x, tx free %04x\n", inw(ioaddr+EL3_STATUS),
- inw(ioaddr+RxStatus), inb(ioaddr+TxStatus),
- inw(ioaddr+TxFree));
+ netdev_info(dev, " irq status %04x, rx status %04x, tx status %02x, tx free %04x\n",
+ inw(ioaddr+EL3_STATUS),
+ inw(ioaddr+RxStatus), inb(ioaddr+TxStatus),
+ inw(ioaddr+TxFree));
EL3WINDOW(4);
- printk(KERN_INFO " diagnostics: fifo %04x net %04x ethernet %04x"
- " media %04x\n", inw(ioaddr+0x04), inw(ioaddr+0x06),
- inw(ioaddr+0x08), inw(ioaddr+0x0a));
+ netdev_info(dev, " diagnostics: fifo %04x net %04x ethernet %04x media %04x\n",
+ inw(ioaddr+0x04), inw(ioaddr+0x06),
+ inw(ioaddr+0x08), inw(ioaddr+0x0a));
EL3WINDOW(1);
}
while (--i > 0)
if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000)) break;
if (i == 0)
- printk(KERN_NOTICE "%s: command 0x%04x did not complete!\n", dev->name, cmd);
+ netdev_notice(dev, "command 0x%04x did not complete!\n", cmd);
}
/* Read a word from the EEPROM using the regular EEPROM access register.
{
unsigned int ioaddr = dev->base_addr;
- printk(KERN_NOTICE "%s: Transmit timed out!\n", dev->name);
+ netdev_notice(dev, "Transmit timed out!\n");
dump_status(dev);
dev->stats.tx_errors++;
dev->trans_start = jiffies; /* prevent tx timeout */
EL3WINDOW(4);
fifo_diag = inw(ioaddr + Wn4_FIFODiag);
EL3WINDOW(1);
- printk(KERN_NOTICE "%s: adapter failure, FIFO diagnostic"
- " register %04x.\n", dev->name, fifo_diag);
+ netdev_notice(dev, "adapter failure, FIFO diagnostic register %04x\n",
+ fifo_diag);
if (fifo_diag & 0x0400) {
/* Tx overrun */
tc574_wait_for_completion(dev, TxReset);
this, we can limp along even if the interrupt is blocked */
if ((inw(ioaddr + EL3_STATUS) & IntLatch) && (inb(ioaddr + Timer) == 0xff)) {
if (!lp->fast_poll)
- printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);
+ netdev_info(dev, "interrupt(s) dropped!\n");
local_irq_save(flags);
el3_interrupt(dev->irq, dev);
if (media != lp->media_status) {
if ((media ^ lp->media_status) & 0x0004)
- printk(KERN_INFO "%s: %s link beat\n", dev->name,
- (lp->media_status & 0x0004) ? "lost" : "found");
+ netdev_info(dev, "%s link beat\n",
+ (lp->media_status & 0x0004) ? "lost" : "found");
if ((media ^ lp->media_status) & 0x0020) {
lp->partner = 0;
if (lp->media_status & 0x0020) {
- printk(KERN_INFO "%s: autonegotiation restarted\n",
- dev->name);
+ netdev_info(dev, "autonegotiation restarted\n");
} else if (partner) {
partner &= lp->advertising;
lp->partner = partner;
- printk(KERN_INFO "%s: autonegotiation complete: "
- "%sbaseT-%cD selected\n", dev->name,
- ((partner & 0x0180) ? "100" : "10"),
- ((partner & 0x0140) ? 'F' : 'H'));
+ netdev_info(dev, "autonegotiation complete: "
+ "%dbaseT-%cD selected\n",
+ (partner & 0x0180) ? 100 : 10,
+ (partner & 0x0140) ? 'F' : 'H');
} else {
- printk(KERN_INFO "%s: link partner did not autonegotiate\n",
- dev->name);
+ netdev_info(dev, "link partner did not autonegotiate\n");
}
EL3WINDOW(3);
}
if (media & 0x0010)
- printk(KERN_INFO "%s: remote fault detected\n",
- dev->name);
+ netdev_info(dev, "remote fault detected\n");
if (media & 0x0002)
- printk(KERN_INFO "%s: jabber detected\n", dev->name);
+ netdev_info(dev, "jabber detected\n");
lp->media_status = media;
}
spin_unlock_irqrestore(&lp->window_lock, flags);
======================================================================*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DRV_NAME "3c589_cs"
#define DRV_VERSION "1.162-ac"
phys_addr = (__be16 *)dev->dev_addr;
/* Is this a 3c562? */
if (link->manf_id != MANFID_3COM)
- printk(KERN_INFO "3c589_cs: hmmm, is this really a "
- "3Com card??\n");
+ dev_info(&link->dev, "hmmm, is this really a 3Com card??\n");
multi = (link->card_id == PRODID_3COM_3C562);
link->io_lines = 16;
for (i = 0; i < 3; i++)
phys_addr[i] = htons(read_eeprom(ioaddr, i));
if (phys_addr[0] == htons(0x6060)) {
- printk(KERN_ERR "3c589_cs: IO port conflict at 0x%03lx"
- "-0x%03lx\n", dev->base_addr, dev->base_addr+15);
+ dev_err(&link->dev, "IO port conflict at 0x%03lx-0x%03lx\n",
+ dev->base_addr, dev->base_addr+15);
goto failed;
}
}
if ((if_port >= 0) && (if_port <= 3))
dev->if_port = if_port;
else
- printk(KERN_ERR "3c589_cs: invalid if_port requested\n");
+ dev_err(&link->dev, "invalid if_port requested\n");
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
- printk(KERN_ERR "3c589_cs: register_netdev() failed\n");
+ dev_err(&link->dev, "register_netdev() failed\n");
goto failed;
}
======================================================================*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
dev->base_addr = link->resource[0]->start;
if (!get_prom(link)) {
- printk(KERN_NOTICE "axnet_cs: this is not an AX88190 card!\n");
- printk(KERN_NOTICE "axnet_cs: use pcnet_cs instead.\n");
+ pr_notice("this is not an AX88190 card!\n");
+ pr_notice("use pcnet_cs instead.\n");
goto failed;
}
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
- printk(KERN_NOTICE "axnet_cs: register_netdev() failed\n");
+ pr_notice("register_netdev() failed\n");
goto failed;
}
- printk(KERN_INFO "%s: Asix AX88%d90: io %#3lx, irq %d, "
- "hw_addr %pM\n",
- dev->name, ((info->flags & IS_AX88790) ? 7 : 1),
- dev->base_addr, dev->irq,
- dev->dev_addr);
+ netdev_info(dev, "Asix AX88%d90: io %#3lx, irq %d, hw_addr %pM\n",
+ ((info->flags & IS_AX88790) ? 7 : 1),
+ dev->base_addr, dev->irq, dev->dev_addr);
if (info->phy_id != -1) {
- dev_dbg(&link->dev, " MII transceiver at index %d, status %x.\n", info->phy_id, j);
+ netdev_dbg(dev, " MII transceiver at index %d, status %x\n",
+ info->phy_id, j);
} else {
- printk(KERN_NOTICE " No MII transceivers found!\n");
+ netdev_notice(dev, " No MII transceivers found!\n");
}
return 0;
outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */
if (i == 100)
- printk(KERN_ERR "%s: axnet_reset_8390() did not complete.\n",
- dev->name);
+ netdev_err(dev, "axnet_reset_8390() did not complete\n");
} /* axnet_reset_8390 */
this, we can limp along even if the interrupt is blocked */
if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) {
if (!info->fast_poll)
- printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);
+ netdev_info(dev, "interrupt(s) dropped!\n");
ei_irq_wrapper(dev->irq, dev);
info->fast_poll = HZ;
}
goto reschedule;
link = mdio_read(mii_addr, info->phy_id, 1);
if (!link || (link == 0xffff)) {
- printk(KERN_INFO "%s: MII is missing!\n", dev->name);
+ netdev_info(dev, "MII is missing!\n");
info->phy_id = -1;
goto reschedule;
}
link &= 0x0004;
if (link != info->link_status) {
u_short p = mdio_read(mii_addr, info->phy_id, 5);
- printk(KERN_INFO "%s: %s link beat\n", dev->name,
- (link) ? "found" : "lost");
+ netdev_info(dev, "%s link beat\n", link ? "found" : "lost");
if (link) {
info->duplex_flag = (p & 0x0140) ? 0x80 : 0x00;
if (p)
- printk(KERN_INFO "%s: autonegotiation complete: "
- "%sbaseT-%cD selected\n", dev->name,
- ((p & 0x0180) ? "100" : "10"),
- ((p & 0x0140) ? 'F' : 'H'));
+ netdev_info(dev, "autonegotiation complete: %dbaseT-%cD selected\n",
+ (p & 0x0180) ? 100 : 10, (p & 0x0140) ? 'F' : 'H');
else
- printk(KERN_INFO "%s: link partner did not autonegotiate\n",
- dev->name);
+ netdev_info(dev, "link partner did not autonegotiate\n");
AX88190_init(dev, 1);
}
info->link_status = link;
*/
-static const char version_8390[] = KERN_INFO \
- "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@scyld.com)\n";
-
#include <linux/bitops.h>
#include <asm/irq.h>
#include <linux/fcntl.h>
isr = inb(e8390_base+EN0_ISR);
spin_unlock_irqrestore(&ei_local->page_lock, flags);
- printk(KERN_DEBUG "%s: Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n",
- dev->name, (txsr & ENTSR_ABT) ? "excess collisions." :
- (isr) ? "lost interrupt?" : "cable problem?", txsr, isr, tickssofar);
+ netdev_printk(KERN_DEBUG, dev,
+ "Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n",
+ (txsr & ENTSR_ABT) ? "excess collisions." :
+ (isr) ? "lost interrupt?" : "cable problem?",
+ txsr, isr, tickssofar);
if (!isr && !dev->stats.tx_packets)
{
output_page = ei_local->tx_start_page;
ei_local->tx1 = send_length;
if (ei_debug && ei_local->tx2 > 0)
- printk(KERN_DEBUG "%s: idle transmitter tx2=%d, lasttx=%d, txing=%d.\n",
- dev->name, ei_local->tx2, ei_local->lasttx, ei_local->txing);
+ netdev_printk(KERN_DEBUG, dev,
+ "idle transmitter tx2=%d, lasttx=%d, txing=%d\n",
+ ei_local->tx2, ei_local->lasttx,
+ ei_local->txing);
}
else if (ei_local->tx2 == 0)
{
output_page = ei_local->tx_start_page + TX_PAGES/2;
ei_local->tx2 = send_length;
if (ei_debug && ei_local->tx1 > 0)
- printk(KERN_DEBUG "%s: idle transmitter, tx1=%d, lasttx=%d, txing=%d.\n",
- dev->name, ei_local->tx1, ei_local->lasttx, ei_local->txing);
+ netdev_printk(KERN_DEBUG, dev,
+ "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n",
+ ei_local->tx1, ei_local->lasttx,
+ ei_local->txing);
}
else
{ /* We should never get here. */
if (ei_debug)
- printk(KERN_DEBUG "%s: No Tx buffers free! tx1=%d tx2=%d last=%d\n",
- dev->name, ei_local->tx1, ei_local->tx2, ei_local->lasttx);
+ netdev_printk(KERN_DEBUG, dev,
+ "No Tx buffers free! tx1=%d tx2=%d last=%d\n",
+ ei_local->tx1, ei_local->tx2,
+ ei_local->lasttx);
ei_local->irqlock = 0;
netif_stop_queue(dev);
outb_p(ENISR_ALL, e8390_base + EN0_IMR);
spin_lock_irqsave(&ei_local->page_lock, flags);
- if (ei_local->irqlock)
- {
+ if (ei_local->irqlock) {
#if 1 /* This might just be an interrupt for a PCI device sharing this line */
+ const char *msg;
/* The "irqlock" check is only for testing. */
- printk(ei_local->irqlock
- ? "%s: Interrupted while interrupts are masked! isr=%#2x imr=%#2x.\n"
- : "%s: Reentering the interrupt handler! isr=%#2x imr=%#2x.\n",
- dev->name, inb_p(e8390_base + EN0_ISR),
- inb_p(e8390_base + EN0_IMR));
+ if (ei_local->irqlock)
+ msg = "Interrupted while interrupts are masked!";
+ else
+ msg = "Reentering the interrupt handler!";
+ netdev_info(dev, "%s, isr=%#2x imr=%#2x\n",
+ msg,
+ inb_p(e8390_base + EN0_ISR),
+ inb_p(e8390_base + EN0_IMR));
#endif
spin_unlock_irqrestore(&ei_local->page_lock, flags);
return IRQ_NONE;
}
if (ei_debug > 3)
- printk(KERN_DEBUG "%s: interrupt(isr=%#2.2x).\n", dev->name,
- inb_p(e8390_base + EN0_ISR));
+ netdev_printk(KERN_DEBUG, dev, "interrupt(isr=%#2.2x)\n",
+ inb_p(e8390_base + EN0_ISR));
outb_p(0x00, e8390_base + EN0_ISR);
ei_local->irqlock = 1;
{
if (!netif_running(dev) || (interrupts == 0xff)) {
if (ei_debug > 1)
- printk(KERN_WARNING "%s: interrupt from stopped card\n", dev->name);
+ netdev_warn(dev,
+ "interrupt from stopped card\n");
outb_p(interrupts, e8390_base + EN0_ISR);
interrupts = 0;
break;
{
/* 0xFF is valid for a card removal */
if(interrupts!=0xFF)
- printk(KERN_WARNING "%s: Too much work at interrupt, status %#2.2x\n",
- dev->name, interrupts);
+ netdev_warn(dev, "Too much work at interrupt, status %#2.2x\n",
+ interrupts);
outb_p(ENISR_ALL, e8390_base + EN0_ISR); /* Ack. most intrs. */
} else {
- printk(KERN_WARNING "%s: unknown interrupt %#2x\n", dev->name, interrupts);
+ netdev_warn(dev, "unknown interrupt %#2x\n",
+ interrupts);
outb_p(0xff, e8390_base + EN0_ISR); /* Ack. all intrs. */
}
}
unsigned char tx_was_aborted = txsr & (ENTSR_ABT+ENTSR_FU);
#ifdef VERBOSE_ERROR_DUMP
- printk(KERN_DEBUG "%s: transmitter error (%#2x): ", dev->name, txsr);
+ netdev_printk(KERN_DEBUG, dev,
+ "transmitter error (%#2x):", txsr);
if (txsr & ENTSR_ABT)
- printk("excess-collisions ");
+ pr_cont(" excess-collisions");
if (txsr & ENTSR_ND)
- printk("non-deferral ");
+ pr_cont(" non-deferral");
if (txsr & ENTSR_CRS)
- printk("lost-carrier ");
+ pr_cont(" lost-carrier");
if (txsr & ENTSR_FU)
- printk("FIFO-underrun ");
+ pr_cont(" FIFO-underrun");
if (txsr & ENTSR_CDH)
- printk("lost-heartbeat ");
- printk("\n");
+ pr_cont(" lost-heartbeat");
+ pr_cont("\n");
#endif
if (tx_was_aborted)
if (ei_local->tx1 < 0)
{
if (ei_local->lasttx != 1 && ei_local->lasttx != -1)
- printk(KERN_ERR "%s: bogus last_tx_buffer %d, tx1=%d.\n",
- ei_local->name, ei_local->lasttx, ei_local->tx1);
+ netdev_err(dev, "%s: bogus last_tx_buffer %d, tx1=%d\n",
+ ei_local->name, ei_local->lasttx,
+ ei_local->tx1);
ei_local->tx1 = 0;
if (ei_local->tx2 > 0)
{
else if (ei_local->tx2 < 0)
{
if (ei_local->lasttx != 2 && ei_local->lasttx != -2)
- printk("%s: bogus last_tx_buffer %d, tx2=%d.\n",
- ei_local->name, ei_local->lasttx, ei_local->tx2);
+ netdev_info(dev, "%s: bogus last_tx_buffer %d, tx2=%d\n",
+ ei_local->name, ei_local->lasttx,
+ ei_local->tx2);
ei_local->tx2 = 0;
if (ei_local->tx1 > 0)
{
else
ei_local->lasttx = 10, ei_local->txing = 0;
}
-// else printk(KERN_WARNING "%s: unexpected TX-done interrupt, lasttx=%d.\n",
-// dev->name, ei_local->lasttx);
+// else
+// netdev_warn(dev, "unexpected TX-done interrupt, lasttx=%d\n",
+// ei_local->lasttx);
/* Minimize Tx latency: update the statistics after we restart TXing. */
if (status & ENTSR_COL)
is that some clones crash in roughly the same way.
*/
if (ei_debug > 0 && this_frame != ei_local->current_page && (this_frame!=0x0 || rxing_page!=0xFF))
- printk(KERN_ERR "%s: mismatched read page pointers %2x vs %2x.\n",
- dev->name, this_frame, ei_local->current_page);
+ netdev_err(dev, "mismatched read page pointers %2x vs %2x\n",
+ this_frame, ei_local->current_page);
if (this_frame == rxing_page) /* Read all the frames? */
break; /* Done for now */
if (pkt_len < 60 || pkt_len > 1518)
{
if (ei_debug)
- printk(KERN_DEBUG "%s: bogus packet size: %d, status=%#2x nxpg=%#2x.\n",
- dev->name, rx_frame.count, rx_frame.status,
- rx_frame.next);
+ netdev_printk(KERN_DEBUG, dev,
+ "bogus packet size: %d, status=%#2x nxpg=%#2x\n",
+ rx_frame.count, rx_frame.status,
+ rx_frame.next);
dev->stats.rx_errors++;
dev->stats.rx_length_errors++;
}
if (skb == NULL)
{
if (ei_debug > 1)
- printk(KERN_DEBUG "%s: Couldn't allocate a sk_buff of size %d.\n",
- dev->name, pkt_len);
+ netdev_printk(KERN_DEBUG, dev,
+ "Couldn't allocate a sk_buff of size %d\n",
+ pkt_len);
dev->stats.rx_dropped++;
break;
}
else
{
if (ei_debug)
- printk(KERN_DEBUG "%s: bogus packet: status=%#2x nxpg=%#2x size=%d\n",
- dev->name, rx_frame.status, rx_frame.next,
- rx_frame.count);
+ netdev_printk(KERN_DEBUG, dev,
+ "bogus packet: status=%#2x nxpg=%#2x size=%d\n",
+ rx_frame.status, rx_frame.next,
+ rx_frame.count);
dev->stats.rx_errors++;
/* NB: The NIC counts CRC, frame and missed errors. */
if (pkt_stat & ENRSR_FO)
/* This _should_ never happen: it's here for avoiding bad clones. */
if (next_frame >= ei_local->stop_page) {
- printk("%s: next frame inconsistency, %#2x\n", dev->name,
- next_frame);
+ netdev_info(dev, "next frame inconsistency, %#2x\n",
+ next_frame);
next_frame = ei_local->rx_start_page;
}
ei_local->current_page = next_frame;
outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD);
if (ei_debug > 1)
- printk(KERN_DEBUG "%s: Receiver overrun.\n", dev->name);
+ netdev_printk(KERN_DEBUG, dev, "Receiver overrun\n");
dev->stats.rx_over_errors++;
/*
{
outb_p(dev->dev_addr[i], e8390_base + EN1_PHYS_SHIFT(i));
if(inb_p(e8390_base + EN1_PHYS_SHIFT(i))!=dev->dev_addr[i])
- printk(KERN_ERR "Hw. address read/write mismap %d\n",i);
+ netdev_err(dev, "Hw. address read/write mismap %d\n", i);
}
outb_p(ei_local->rx_start_page, e8390_base + EN1_CURPAG);
if (inb_p(e8390_base) & E8390_TRANS)
{
- printk(KERN_WARNING "%s: trigger_send() called with the transmitter busy.\n",
- dev->name);
+ netdev_warn(dev, "trigger_send() called with the transmitter busy\n");
return;
}
outb_p(length & 0xff, e8390_base + EN0_TCNTLO);
#define VERSION "arcnet: COM20020 PCMCIA support loaded.\n"
-#ifdef DEBUG
static void regdump(struct net_device *dev)
{
+#ifdef DEBUG
int ioaddr = dev->base_addr;
int count;
- printk("com20020 register dump:\n");
+ netdev_dbg(dev, "register dump:\n");
for (count = ioaddr; count < ioaddr + 16; count++)
{
if (!(count % 16))
- printk("\n%04X: ", count);
- printk("%02X ", inb(count));
+ pr_cont("%04X:", count);
+ pr_cont(" %02X", inb(count));
}
- printk("\n");
+ pr_cont("\n");
- printk("buffer0 dump:\n");
+ netdev_dbg(dev, "buffer0 dump:\n");
/* set up the address register */
count = 0;
outb((count >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI);
for (count = 0; count < 256+32; count++)
{
if (!(count % 16))
- printk("\n%04X: ", count);
+ pr_cont("%04X:", count);
/* copy the data */
- printk("%02X ", inb(_MEMDATA));
+ pr_cont(" %02X", inb(_MEMDATA));
}
- printk("\n");
+ pr_cont("\n");
+#endif
}
-#else
-
-static inline void regdump(struct net_device *dev) { }
-
-#endif
/*====================================================================*/
i = com20020_found(dev, 0); /* calls register_netdev */
if (i != 0) {
- dev_printk(KERN_NOTICE, &link->dev,
- "com20020_cs: com20020_found() failed\n");
+ dev_notice(&link->dev,
+ "com20020_found() failed\n");
goto failed;
}
- dev_dbg(&link->dev,KERN_INFO "%s: port %#3lx, irq %d\n",
- dev->name, dev->base_addr, dev->irq);
+ netdev_dbg(dev, "port %#3lx, irq %d\n",
+ dev->base_addr, dev->irq);
return 0;
failed:
======================================================================*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DRV_NAME "fmvj18x_cs"
#define DRV_VERSION "2.9"
link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
if (link->resource[1]->start == 0) {
link->resource[1]->end = 0;
- printk(KERN_NOTICE "fmvj18x_cs: out of resource for serial\n");
+ pr_notice("out of resource for serial\n");
}
ret = pcmcia_request_io(link);
if (ret == 0)
case XXX10304:
/* Read MACID from Buggy CIS */
if (fmvj18x_get_hwinfo(link, buggybuf) == -1) {
- printk(KERN_NOTICE "fmvj18x_cs: unable to read hardware net address.\n");
+ pr_notice("unable to read hardware net address\n");
goto failed;
}
for (i = 0 ; i < 6; i++) {
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
- printk(KERN_NOTICE "fmvj18x_cs: register_netdev() failed\n");
+ pr_notice("register_netdev() failed\n");
goto failed;
}
/* print current configuration */
- printk(KERN_INFO "%s: %s, sram %s, port %#3lx, irq %d, "
- "hw_addr %pM\n",
- dev->name, card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2",
- dev->base_addr, dev->irq, dev->dev_addr);
+ netdev_info(dev, "%s, sram %s, port %#3lx, irq %d, hw_addr %pM\n",
+ card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2",
+ dev->base_addr, dev->irq, dev->dev_addr);
return 0;
lp->base = ioremap(req.Base, req.Size);
if (lp->base == NULL) {
- printk(KERN_NOTICE "fmvj18x_cs: ioremap failed\n");
+ netdev_notice(dev, "ioremap failed\n");
return -1;
}
struct local_info_t *lp = netdev_priv(dev);
unsigned int ioaddr = dev->base_addr;
- printk(KERN_NOTICE "%s: transmit timed out with status %04x, %s?\n",
- dev->name, htons(inw(ioaddr + TX_STATUS)),
- inb(ioaddr + TX_STATUS) & F_TMT_RDY
- ? "IRQ conflict" : "network cable problem");
- printk(KERN_NOTICE "%s: timeout registers: %04x %04x %04x "
- "%04x %04x %04x %04x %04x.\n",
- dev->name, htons(inw(ioaddr + 0)),
- htons(inw(ioaddr + 2)), htons(inw(ioaddr + 4)),
- htons(inw(ioaddr + 6)), htons(inw(ioaddr + 8)),
- htons(inw(ioaddr +10)), htons(inw(ioaddr +12)),
- htons(inw(ioaddr +14)));
+ netdev_notice(dev, "transmit timed out with status %04x, %s?\n",
+ htons(inw(ioaddr + TX_STATUS)),
+ inb(ioaddr + TX_STATUS) & F_TMT_RDY
+ ? "IRQ conflict" : "network cable problem");
+ netdev_notice(dev, "timeout registers: %04x %04x %04x "
+ "%04x %04x %04x %04x %04x.\n",
+ htons(inw(ioaddr + 0)), htons(inw(ioaddr + 2)),
+ htons(inw(ioaddr + 4)), htons(inw(ioaddr + 6)),
+ htons(inw(ioaddr + 8)), htons(inw(ioaddr + 10)),
+ htons(inw(ioaddr + 12)), htons(inw(ioaddr + 14)));
dev->stats.tx_errors++;
/* ToDo: We should try to restart the adaptor... */
local_irq_disable();
unsigned char *buf = skb->data;
if (length > ETH_FRAME_LEN) {
- printk(KERN_NOTICE "%s: Attempting to send a large packet"
- " (%d bytes).\n", dev->name, length);
+ netdev_notice(dev, "Attempting to send a large packet (%d bytes)\n",
+ length);
return NETDEV_TX_BUSY;
}
- pr_debug("%s: Transmitting a packet of length %lu.\n",
- dev->name, (unsigned long)skb->len);
+ netdev_dbg(dev, "Transmitting a packet of length %lu\n",
+ (unsigned long)skb->len);
dev->stats.tx_bytes += skb->len;
/* Disable both interrupts. */
unsigned int ioaddr = dev->base_addr;
int i;
- pr_debug("fjn_reset(%s) called.\n",dev->name);
+ netdev_dbg(dev, "fjn_reset() called\n");
/* Reset controller */
if( sram_config == 0 )
while ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
u_short status = inw(ioaddr + DATAPORT);
- pr_debug("%s: Rxing packet mode %02x status %04x.\n",
- dev->name, inb(ioaddr + RX_MODE), status);
+ netdev_dbg(dev, "Rxing packet mode %02x status %04x.\n",
+ inb(ioaddr + RX_MODE), status);
#ifndef final_version
if (status == 0) {
outb(F_SKP_PKT, ioaddr + RX_SKIP);
struct sk_buff *skb;
if (pkt_len > 1550) {
- printk(KERN_NOTICE "%s: The FMV-18x claimed a very "
- "large packet, size %d.\n", dev->name, pkt_len);
+ netdev_notice(dev, "The FMV-18x claimed a very large packet, size %d\n",
+ pkt_len);
outb(F_SKP_PKT, ioaddr + RX_SKIP);
dev->stats.rx_errors++;
break;
}
skb = dev_alloc_skb(pkt_len+2);
if (skb == NULL) {
- printk(KERN_NOTICE "%s: Memory squeeze, dropping "
- "packet (len %d).\n", dev->name, pkt_len);
+ netdev_notice(dev, "Memory squeeze, dropping packet (len %d)\n",
+ pkt_len);
outb(F_SKP_PKT, ioaddr + RX_SKIP);
dev->stats.rx_dropped++;
break;
======================================================================*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/ptrace.h>
i = ibmtr_probe_card(dev);
if (i != 0) {
- printk(KERN_NOTICE "ibmtr_cs: register_netdev() failed\n");
+ pr_notice("register_netdev() failed\n");
goto failed;
}
- printk(KERN_INFO
- "%s: port %#3lx, irq %d, mmio %#5lx, sram %#5lx, hwaddr=%pM\n",
- dev->name, dev->base_addr, dev->irq,
- (u_long)ti->mmio, (u_long)(ti->sram_base << 12),
- dev->dev_addr);
+ netdev_info(dev, "port %#3lx, irq %d, mmio %#5lx, sram %#5lx, hwaddr=%pM\n",
+ dev->base_addr, dev->irq,
+ (u_long)ti->mmio, (u_long)(ti->sram_base << 12),
+ dev->dev_addr);
return 0;
failed:
---------------------------------------------------------------------------- */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DRV_NAME "nmclan_cs"
#define DRV_VERSION "0.16"
/* Wait for reset bit to be cleared automatically after <= 200ns */;
if(++ct > 500)
{
- printk(KERN_ERR "mace: reset failed, card removed ?\n");
+ pr_err("reset failed, card removed?\n");
return -1;
}
udelay(1);
{
if(++ ct > 500)
{
- printk(KERN_ERR "mace: ADDRCHG timeout, card removed ?\n");
+ pr_err("ADDRCHG timeout, card removed?\n");
return -1;
}
}
dev_dbg(&link->dev, "nmclan_cs configured: mace id=%x %x\n",
sig[0], sig[1]);
} else {
- printk(KERN_NOTICE "nmclan_cs: mace id not found: %x %x should"
- " be 0x40 0x?9\n", sig[0], sig[1]);
+ pr_notice("mace id not found: %x %x should be 0x40 0x?9\n",
+ sig[0], sig[1]);
return -ENODEV;
}
}
if (if_port <= 2)
dev->if_port = if_port;
else
- printk(KERN_NOTICE "nmclan_cs: invalid if_port requested\n");
+ pr_notice("invalid if_port requested\n");
SET_NETDEV_DEV(dev, &link->dev);
i = register_netdev(dev);
if (i != 0) {
- printk(KERN_NOTICE "nmclan_cs: register_netdev() failed\n");
+ pr_notice("register_netdev() failed\n");
goto failed;
}
- printk(KERN_INFO "%s: nmclan: port %#3lx, irq %d, %s port,"
- " hw_addr %pM\n",
- dev->name, dev->base_addr, dev->irq, if_names[dev->if_port],
- dev->dev_addr);
+ netdev_info(dev, "nmclan: port %#3lx, irq %d, %s port, hw_addr %pM\n",
+ dev->base_addr, dev->irq, if_names[dev->if_port], dev->dev_addr);
return 0;
failed:
if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
if (map->port <= 2) {
dev->if_port = map->port;
- printk(KERN_INFO "%s: switched to %s port\n", dev->name,
- if_names[dev->if_port]);
+ netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
} else
return -EINVAL;
}
mace_private *lp = netdev_priv(dev);
struct pcmcia_device *link = lp->p_dev;
- printk(KERN_NOTICE "%s: transmit timed out -- ", dev->name);
+ netdev_notice(dev, "transmit timed out -- ");
#if RESET_ON_TIMEOUT
- printk("resetting card\n");
+ pr_cont("resetting card\n");
pcmcia_reset_card(link->socket);
#else /* #if RESET_ON_TIMEOUT */
- printk("NOT resetting card\n");
+ pr_cont("NOT resetting card\n");
#endif /* #if RESET_ON_TIMEOUT */
dev->trans_start = jiffies; /* prevent tx timeout */
netif_wake_queue(dev);
ioaddr = dev->base_addr;
if (lp->tx_irq_disabled) {
- printk(
- (lp->tx_irq_disabled?
- KERN_NOTICE "%s: Interrupt with tx_irq_disabled "
- "[isr=%02X, imr=%02X]\n":
- KERN_NOTICE "%s: Re-entering the interrupt handler "
- "[isr=%02X, imr=%02X]\n"),
- dev->name,
- inb(ioaddr + AM2150_MACE_BASE + MACE_IR),
- inb(ioaddr + AM2150_MACE_BASE + MACE_IMR)
- );
+ const char *msg;
+ if (lp->tx_irq_disabled)
+ msg = "Interrupt with tx_irq_disabled";
+ else
+ msg = "Re-entering the interrupt handler";
+ netdev_notice(dev, "%s [isr=%02X, imr=%02X]\n",
+ msg,
+ inb(ioaddr + AM2150_MACE_BASE + MACE_IR),
+ inb(ioaddr + AM2150_MACE_BASE + MACE_IMR));
/* WARNING: MACE_IR has been read! */
return IRQ_NONE;
}
if (!netif_device_present(dev)) {
- pr_debug("%s: interrupt from dead card\n", dev->name);
+ netdev_dbg(dev, "interrupt from dead card\n");
return IRQ_NONE;
}
printk(KERN_DEBUG " adr =%pM\n", adr);
printk(KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63] =", hashcode);
for (i = 0; i < 8; i++)
- printk(KERN_CONT " %02X", ladrf[i]);
- printk(KERN_CONT "\n");
+ pr_cont(" %02X", ladrf[i]);
+ pr_cont("\n");
#endif
} /* BuildLAF */
======================================================================*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
modconf_t mod = {
.Attributes = CONF_IO_CHANGE_WIDTH,
};
- printk(KERN_INFO "smc91c92_cs: using 8-bit IO window.\n");
+ pr_info("using 8-bit IO window\n");
smc91c92_suspend(link);
pcmcia_modify_configuration(link, &mod);
if ((if_port >= 0) && (if_port <= 2))
dev->if_port = if_port;
else
- printk(KERN_NOTICE "smc91c92_cs: invalid if_port requested\n");
+ dev_notice(&link->dev, "invalid if_port requested\n");
switch (smc->manfid) {
case MANFID_OSITECH:
}
if (i != 0) {
- printk(KERN_NOTICE "smc91c92_cs: Unable to find hardware address.\n");
+ dev_notice(&link->dev, "Unable to find hardware address.\n");
goto config_failed;
}
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
- printk(KERN_ERR "smc91c92_cs: register_netdev() failed\n");
+ dev_err(&link->dev, "register_netdev() failed\n");
goto config_undo;
}
- printk(KERN_INFO "%s: smc91c%s rev %d: io %#3lx, irq %d, "
- "hw_addr %pM\n",
- dev->name, name, (rev & 0x0f), dev->base_addr, dev->irq,
- dev->dev_addr);
+ netdev_info(dev, "smc91c%s rev %d: io %#3lx, irq %d, hw_addr %pM\n",
+ name, (rev & 0x0f), dev->base_addr, dev->irq, dev->dev_addr);
if (rev > 0) {
if (mir & 0x3ff)
- printk(KERN_INFO " %lu byte", mir);
+ netdev_info(dev, " %lu byte", mir);
else
- printk(KERN_INFO " %lu kb", mir>>10);
- printk(" buffer, %s xcvr\n", (smc->cfg & CFG_MII_SELECT) ?
- "MII" : if_names[dev->if_port]);
+ netdev_info(dev, " %lu kb", mir>>10);
+ pr_cont(" buffer, %s xcvr\n",
+ (smc->cfg & CFG_MII_SELECT) ? "MII" : if_names[dev->if_port]);
}
if (smc->cfg & CFG_MII_SELECT) {
if (smc->mii_if.phy_id != -1) {
- dev_dbg(&link->dev, " MII transceiver at index %d, status %x.\n",
- smc->mii_if.phy_id, j);
+ netdev_dbg(dev, " MII transceiver at index %d, status %x\n",
+ smc->mii_if.phy_id, j);
} else {
- printk(KERN_NOTICE " No MII transceivers found!\n");
+ netdev_notice(dev, " No MII transceivers found!\n");
}
}
return 0;
save = inw(ioaddr + BANK_SELECT);
for (w = 0; w < 4; w++) {
SMC_SELECT_BANK(w);
- printk(KERN_DEBUG "bank %d: ", w);
+ netdev_printk(KERN_DEBUG, dev, "bank %d: ", w);
for (i = 0; i < 14; i += 2)
- printk(" %04x", inw(ioaddr + i));
- printk("\n");
+ pr_cont(" %04x", inw(ioaddr + i));
+ pr_cont("\n");
}
outw(save, ioaddr + BANK_SELECT);
}
return -ENODEV;
/* Physical device present signature. */
if (check_sig(link) < 0) {
- printk("smc91c92_cs: Yikes! Bad chip signature!\n");
+ netdev_info(dev, "Yikes! Bad chip signature!\n");
return -ENODEV;
}
link->open++;
u_char packet_no;
if (!skb) {
- printk(KERN_ERR "%s: In XMIT with no packet to send.\n", dev->name);
+ netdev_err(dev, "In XMIT with no packet to send\n");
return;
}
packet_no = inw(ioaddr + PNR_ARR) >> 8;
if (packet_no & 0x80) {
/* If not, there is a hardware problem! Likely an ejected card. */
- printk(KERN_WARNING "%s: 91c92 hardware Tx buffer allocation"
- " failed, status %#2.2x.\n", dev->name, packet_no);
+ netdev_warn(dev, "hardware Tx buffer allocation failed, status %#2.2x\n",
+ packet_no);
dev_kfree_skb_irq(skb);
smc->saved_skb = NULL;
netif_start_queue(dev);
u_char *buf = skb->data;
u_int length = skb->len; /* The chip will pad to ethernet min. */
- pr_debug("%s: Trying to xmit packet of length %d.\n",
- dev->name, length);
+ netdev_dbg(dev, "Trying to xmit packet of length %d\n", length);
/* send the packet length: +6 for status word, length, and ctl */
outw(0, ioaddr + DATA_1);
struct smc_private *smc = netdev_priv(dev);
unsigned int ioaddr = dev->base_addr;
- printk(KERN_NOTICE "%s: SMC91c92 transmit timed out, "
- "Tx_status %2.2x status %4.4x.\n",
- dev->name, inw(ioaddr)&0xff, inw(ioaddr + 2));
+ netdev_notice(dev, "transmit timed out, Tx_status %2.2x status %4.4x.\n",
+ inw(ioaddr)&0xff, inw(ioaddr + 2));
dev->stats.tx_errors++;
smc_reset(dev);
dev->trans_start = jiffies; /* prevent tx timeout */
netif_stop_queue(dev);
- pr_debug("%s: smc_start_xmit(length = %d) called,"
- " status %4.4x.\n", dev->name, skb->len, inw(ioaddr + 2));
+ netdev_dbg(dev, "smc_start_xmit(length = %d) called, status %04x\n",
+ skb->len, inw(ioaddr + 2));
if (smc->saved_skb) {
/* THIS SHOULD NEVER HAPPEN. */
dev->stats.tx_aborted_errors++;
- printk(KERN_DEBUG "%s: Internal error -- sent packet while busy.\n",
- dev->name);
+ netdev_printk(KERN_DEBUG, dev,
+ "Internal error -- sent packet while busy\n");
return NETDEV_TX_BUSY;
}
smc->saved_skb = skb;
num_pages = skb->len >> 8;
if (num_pages > 7) {
- printk(KERN_ERR "%s: Far too big packet error.\n", dev->name);
+ netdev_err(dev, "Far too big packet error: %d pages\n", num_pages);
dev_kfree_skb (skb);
smc->saved_skb = NULL;
dev->stats.tx_dropped++;
}
if (tx_status & TS_SUCCESS) {
- printk(KERN_NOTICE "%s: Successful packet caused error "
- "interrupt?\n", dev->name);
+ netdev_notice(dev, "Successful packet caused error interrupt?\n");
}
/* re-enable transmit */
SMC_SELECT_BANK(0);
/* Assertion: we are in Window 2. */
if (inw(ioaddr + FIFO_PORTS) & FP_RXEMPTY) {
- printk(KERN_ERR "%s: smc_rx() with nothing on Rx FIFO.\n",
- dev->name);
+ netdev_err(dev, "smc_rx() with nothing on Rx FIFO\n");
return;
}
else if (map->port > 2)
return -EINVAL;
dev->if_port = map->port;
- printk(KERN_INFO "%s: switched to %s port\n",
- dev->name, if_names[dev->if_port]);
+ netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
smc_reset(dev);
}
return 0;
this, we can limp along even if the interrupt is blocked */
if (smc->watchdog++ && ((i>>8) & i)) {
if (!smc->fast_poll)
- printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);
+ netdev_info(dev, "interrupt(s) dropped!\n");
local_irq_save(flags);
smc_interrupt(dev->irq, dev);
local_irq_restore(flags);
SMC_SELECT_BANK(3);
link = mdio_read(dev, smc->mii_if.phy_id, 1);
if (!link || (link == 0xffff)) {
- printk(KERN_INFO "%s: MII is missing!\n", dev->name);
+ netdev_info(dev, "MII is missing!\n");
smc->mii_if.phy_id = -1;
goto reschedule;
}
link &= 0x0004;
if (link != smc->link_status) {
u_short p = mdio_read(dev, smc->mii_if.phy_id, 5);
- printk(KERN_INFO "%s: %s link beat\n", dev->name,
- (link) ? "found" : "lost");
+ netdev_info(dev, "%s link beat\n", link ? "found" : "lost");
smc->duplex = (((p & 0x0100) || ((p & 0x1c0) == 0x40))
? TCR_FDUPLX : 0);
if (link) {
- printk(KERN_INFO "%s: autonegotiation complete: "
- "%sbaseT-%cD selected\n", dev->name,
- ((p & 0x0180) ? "100" : "10"),
- (smc->duplex ? 'F' : 'H'));
+ netdev_info(dev, "autonegotiation complete: "
+ "%dbaseT-%cD selected\n",
+ (p & 0x0180) ? 100 : 10, smc->duplex ? 'F' : 'H');
}
SMC_SELECT_BANK(0);
outw(inw(ioaddr + TCR) | smc->duplex, ioaddr + TCR);
if (media != smc->media_status) {
if ((media & smc->media_status & 1) &&
((smc->media_status ^ media) & EPH_LINK_OK))
- printk(KERN_INFO "%s: %s link beat\n", dev->name,
- (smc->media_status & EPH_LINK_OK ? "lost" : "found"));
+ netdev_info(dev, "%s link beat\n",
+ smc->media_status & EPH_LINK_OK ? "lost" : "found");
else if ((media & smc->media_status & 2) &&
((smc->media_status ^ media) & EPH_16COL))
- printk(KERN_INFO "%s: coax cable %s\n", dev->name,
- (media & EPH_16COL ? "problem" : "ok"));
+ netdev_info(dev, "coax cable %s\n",
+ media & EPH_16COL ? "problem" : "ok");
if (dev->if_port == 0) {
if (media & 1) {
if (media & EPH_LINK_OK)
- printk(KERN_INFO "%s: flipped to 10baseT\n",
- dev->name);
+ netdev_info(dev, "flipped to 10baseT\n");
else
smc_set_xcvr(dev, 2);
} else {
if (media & EPH_16COL)
smc_set_xcvr(dev, 1);
else
- printk(KERN_INFO "%s: flipped to 10base2\n",
- dev->name);
+ netdev_info(dev, "flipped to 10base2\n");
}
}
smc->media_status = media;
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
static const char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
-
-#define KDBG_XIRC KERN_DEBUG "xirc2ps_cs: "
-#define KERR_XIRC KERN_ERR "xirc2ps_cs: "
-#define KWRN_XIRC KERN_WARNING "xirc2ps_cs: "
-#define KNOT_XIRC KERN_NOTICE "xirc2ps_cs: "
-#define KINF_XIRC KERN_INFO "xirc2ps_cs: "
-
/* card types */
#define XIR_UNKNOWN 0 /* unknown: not supported */
#define XIR_CE 1 /* (prodid 1) different hardware: not supported */
if (pc_debug > 1) {
int i, page;
- printk(KDBG_XIRC "Register common: ");
+ printk(KERN_DEBUG pr_fmt("Register common: "));
for (i = 0; i < 8; i++)
- printk(" %2.2x", GetByte(i));
- printk("\n");
+ pr_cont(" %2.2x", GetByte(i));
+ pr_cont("\n");
for (page = 0; page <= 8; page++) {
- printk(KDBG_XIRC "Register page %2x: ", page);
+ printk(KERN_DEBUG pr_fmt("Register page %2x: "), page);
SelectPage(page);
for (i = 8; i < 16; i++)
- printk(" %2.2x", GetByte(i));
- printk("\n");
+ pr_cont(" %2.2x", GetByte(i));
+ pr_cont("\n");
}
for (page=0x40 ; page <= 0x5f; page++) {
if (page == 0x43 || (page >= 0x46 && page <= 0x4f) ||
(page >= 0x51 && page <=0x5e))
continue;
- printk(KDBG_XIRC "Register page %2x: ", page);
+ printk(KERN_DEBUG pr_fmt("Register page %2x: "), page);
SelectPage(page);
for (i = 8; i < 16; i++)
- printk(" %2.2x", GetByte(i));
- printk("\n");
+ pr_cont(" %2.2x", GetByte(i));
+ pr_cont("\n");
}
}
}
local->modem = 0;
local->card_type = XIR_UNKNOWN;
if (!(prodid & 0x40)) {
- printk(KNOT_XIRC "Ooops: Not a creditcard\n");
+ pr_notice("Oops: Not a creditcard\n");
return 0;
}
if (!(mediaid & 0x01)) {
- printk(KNOT_XIRC "Not an Ethernet card\n");
+ pr_notice("Not an Ethernet card\n");
return 0;
}
if (mediaid & 0x10) {
}
}
if (local->card_type == XIR_CE || local->card_type == XIR_CEM) {
- printk(KNOT_XIRC "Sorry, this is an old CE card\n");
+ pr_notice("Sorry, this is an old CE card\n");
return 0;
}
if (local->card_type == XIR_UNKNOWN)
- printk(KNOT_XIRC "unknown card (mediaid=%02x prodid=%02x)\n",
- mediaid, prodid);
+ pr_notice("unknown card (mediaid=%02x prodid=%02x)\n", mediaid, prodid);
return 1;
}
/* Is this a valid card */
if (link->has_manf_id == 0) {
- printk(KNOT_XIRC "manfid not found in CIS\n");
+ pr_notice("manfid not found in CIS\n");
goto failure;
}
local->manf_str = "Toshiba";
break;
default:
- printk(KNOT_XIRC "Unknown Card Manufacturer ID: 0x%04x\n",
- (unsigned)link->manf_id);
+ pr_notice("Unknown Card Manufacturer ID: 0x%04x\n",
+ (unsigned)link->manf_id);
goto failure;
}
dev_dbg(&link->dev, "found %s card\n", local->manf_str);
if (!set_card_type(link)) {
- printk(KNOT_XIRC "this card is not supported\n");
+ pr_notice("this card is not supported\n");
goto failure;
}
err = pcmcia_loop_tuple(link, CISTPL_FUNCE, pcmcia_get_mac_ce, dev);
if (err) {
- printk(KNOT_XIRC "node-id not found in CIS\n");
+ pr_notice("node-id not found in CIS\n");
goto failure;
}
* try to configure as Ethernet only.
* .... */
}
- printk(KNOT_XIRC "no ports available\n");
+ pr_notice("no ports available\n");
} else {
link->resource[0]->end = 16;
for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
#if 0
{
u_char tmp;
- printk(KERN_INFO "ECOR:");
+ pr_info("ECOR:");
for (i=0; i < 7; i++) {
tmp = readb(local->dingo_ccr + i*2);
- printk(" %02x", tmp);
+ pr_cont(" %02x", tmp);
}
- printk("\n");
- printk(KERN_INFO "DCOR:");
+ pr_cont("\n");
+ pr_info("DCOR:");
for (i=0; i < 4; i++) {
tmp = readb(local->dingo_ccr + 0x20 + i*2);
- printk(" %02x", tmp);
+ pr_cont(" %02x", tmp);
}
- printk("\n");
- printk(KERN_INFO "SCOR:");
+ pr_cont("\n");
+ pr_info("SCOR:");
for (i=0; i < 10; i++) {
tmp = readb(local->dingo_ccr + 0x40 + i*2);
- printk(" %02x", tmp);
+ pr_cont(" %02x", tmp);
}
- printk("\n");
+ pr_cont("\n");
}
#endif
(local->mohawk && if_port==4))
dev->if_port = if_port;
else
- printk(KNOT_XIRC "invalid if_port requested\n");
+ pr_notice("invalid if_port requested\n");
/* we can now register the device with the net subsystem */
dev->irq = link->irq;
SET_NETDEV_DEV(dev, &link->dev);
if ((err=register_netdev(dev))) {
- printk(KNOT_XIRC "register_netdev() failed\n");
+ pr_notice("register_netdev() failed\n");
goto config_error;
}
/* give some infos about the hardware */
- printk(KERN_INFO "%s: %s: port %#3lx, irq %d, hwaddr %pM\n",
- dev->name, local->manf_str,(u_long)dev->base_addr, (int)dev->irq,
- dev->dev_addr);
+ netdev_info(dev, "%s: port %#3lx, irq %d, hwaddr %pM\n",
+ local->manf_str, (u_long)dev->base_addr, (int)dev->irq,
+ dev->dev_addr);
return 0;
skb = dev_alloc_skb(pktlen+3); /* 1 extra so we can use insw */
if (!skb) {
- printk(KNOT_XIRC "low memory, packet dropped (size=%u)\n",
- pktlen);
+ pr_notice("low memory, packet dropped (size=%u)\n", pktlen);
dev->stats.rx_dropped++;
} else { /* okay get the packet */
skb_reserve(skb, 2);
{
local_info_t *lp = netdev_priv(dev);
dev->stats.tx_errors++;
- printk(KERN_NOTICE "%s: transmit timed out\n", dev->name);
+ netdev_notice(dev, "transmit timed out\n");
schedule_work(&lp->tx_timeout_task);
}
local->probe_port = 0;
dev->if_port = map->port;
}
- printk(KERN_INFO "%s: switching to %s port\n",
- dev->name, if_names[dev->if_port]);
+ netdev_info(dev, "switching to %s port\n", if_names[dev->if_port]);
do_reset(dev,1); /* not the fine way :-) */
}
return 0;
{
SelectPage(0);
value = GetByte(XIRCREG_ESR); /* read the ESR */
- printk(KERN_DEBUG "%s: ESR is: %#02x\n", dev->name, value);
+ pr_debug("%s: ESR is: %#02x\n", dev->name, value);
}
#endif
if (full && local->mohawk && init_mii(dev)) {
if (dev->if_port == 4 || local->dingo || local->new_mii) {
- printk(KERN_INFO "%s: MII selected\n", dev->name);
+ netdev_info(dev, "MII selected\n");
SelectPage(2);
PutByte(XIRCREG2_MSR, GetByte(XIRCREG2_MSR) | 0x08);
msleep(20);
} else {
- printk(KERN_INFO "%s: MII detected; using 10mbs\n",
- dev->name);
+ netdev_info(dev, "MII detected; using 10mbs\n");
SelectPage(0x42);
if (dev->if_port == 2) /* enable 10Base2 */
PutByte(XIRCREG42_SWC1, 0xC0);
}
if (full)
- printk(KERN_INFO "%s: media %s, silicon revision %d\n",
- dev->name, if_names[dev->if_port], local->silicon);
+ netdev_info(dev, "media %s, silicon revision %d\n",
+ if_names[dev->if_port], local->silicon);
/* We should switch back to page 0 to avoid a bug in revision 0
* where regs with offset below 8 can't be read after an access
* to the MAC registers */
control = mii_rd(ioaddr, 0, 0);
if (control & 0x0400) {
- printk(KERN_NOTICE "%s can't take PHY out of isolation mode\n",
- dev->name);
+ netdev_notice(dev, "can't take PHY out of isolation mode\n");
local->probe_port = 0;
return 0;
}
}
if (!(status & 0x0020)) {
- printk(KERN_INFO "%s: autonegotiation failed;"
- " using 10mbs\n", dev->name);
+ netdev_info(dev, "autonegotiation failed; using 10mbs\n");
if (!local->new_mii) {
control = 0x0000;
mii_wr(ioaddr, 0, 0, control, 16);
}
} else {
linkpartner = mii_rd(ioaddr, 0, 5);
- printk(KERN_INFO "%s: MII link partner: %04x\n",
- dev->name, linkpartner);
+ netdev_info(dev, "MII link partner: %04x\n", linkpartner);
if (linkpartner & 0x0080) {
dev->if_port = 4;
} else
projects / openwrt / staging / blogic.git / commitdiff