write to these files. Many common debugging facilities, such as
ftrace, require the existence of debugfs.
-# remove KERNEL_MIPS_FPU_EMULATOR after kernel 4.14 and 4.14 are gone
+# remove KERNEL_MIPS_FPU_EMULATOR after kernel 4.19 is gone
config KERNEL_MIPS_FPU_EMULATOR
bool "Compile the kernel with MIPS FPU Emulator"
default y if TARGET_pistachio
$(eval $(if $(NF_KMOD),$(call nf_add,NF_IPT6,CONFIG_IP6_NF_IPTABLES, $(P_V6)ip6_tables),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NF_CONNTRACK,CONFIG_NF_DEFRAG_IPV6, $(P_V6)nf_defrag_ipv6, ge 4.19),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NF_CONNTRACK6,CONFIG_NF_DEFRAG_IPV6, $(P_V6)nf_defrag_ipv6, lt 4.19),))
+$(eval $(if $(NF_KMOD),$(call nf_add,NF_CONNTRACK,CONFIG_NF_DEFRAG_IPV6, $(P_V6)nf_defrag_ipv6),))
$(eval $(if $(NF_KMOD),$(call nf_add,NF_CONNTRACK6,CONFIG_NF_CONNTRACK_IPV6, $(P_V6)nf_conntrack_ipv6),))
$(eval $(if $(NF_KMOD),$(call nf_add,IPT_IPV6,CONFIG_IP6_NF_FILTER, $(P_V6)ip6table_filter),))
$(eval $(if $(NF_KMOD),$(call nf_add,NF_NAT,CONFIG_NF_NAT, $(P_XT)nf_nat),))
$(eval $(if $(NF_KMOD),$(call nf_add,NF_NAT,CONFIG_NF_NAT_REDIRECT, $(P_XT)nf_nat_redirect),))
$(eval $(if $(NF_KMOD),$(call nf_add,NF_NAT,CONFIG_NF_NAT_IPV4, $(P_V4)nf_nat_ipv4),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NF_NAT,CONFIG_NF_NAT_MASQUERADE_IPV4, $(P_V4)nf_nat_masquerade_ipv4, lt 4.18),))
-
$(eval $(if $(NF_KMOD),$(call nf_add,NF_NAT6,CONFIG_NF_NAT_IPV6, $(P_V6)nf_nat_ipv6),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NF_NAT6,CONFIG_NF_NAT_MASQUERADE_IPV6, $(P_V6)nf_nat_masquerade_ipv6, lt 4.18),))
$(eval $(if $(NF_KMOD),$(call nf_add,IPT_NAT,CONFIG_NETFILTER_XT_NAT, $(P_XT)xt_nat),))
$(eval $(if $(NF_KMOD),$(call nf_add,IPT_NAT,CONFIG_IP_NF_NAT, $(P_V4)iptable_nat),))
$(eval $(call nf_add,IPT_TPROXY,CONFIG_NF_SOCKET_IPV4, $(P_V4)nf_socket_ipv4))
$(eval $(call nf_add,IPT_TPROXY,CONFIG_NF_SOCKET_IPV6, $(P_V6)nf_socket_ipv6))
$(eval $(call nf_add,IPT_TPROXY,CONFIG_NETFILTER_XT_TARGET_TPROXY, $(P_XT)xt_TPROXY))
-$(eval $(call nf_add,IPT_TPROXY,CONFIG_NF_TPROXY_IPV4, $(P_V4)nf_tproxy_ipv4, ge 4.18))
-$(eval $(call nf_add,IPT_TPROXY,CONFIG_NF_TPROXY_IPV6, $(P_V6)nf_tproxy_ipv6, ge 4.18))
+$(eval $(call nf_add,IPT_TPROXY,CONFIG_NF_TPROXY_IPV4, $(P_V4)nf_tproxy_ipv4))
+$(eval $(call nf_add,IPT_TPROXY,CONFIG_NF_TPROXY_IPV6, $(P_V6)nf_tproxy_ipv6))
# led
$(eval $(call nf_add,IPT_LED,CONFIG_NETFILTER_XT_TARGET_LED, $(P_XT)xt_LED))
# nftables
$(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NF_TABLES, $(P_XT)nf_tables),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NF_TABLES_INET, $(P_XT)nf_tables_inet, lt 4.17),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NF_TABLES_IPV4, $(P_V4)nf_tables_ipv4, lt 4.17),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NF_TABLES_IPV6, $(P_V6)nf_tables_ipv6, lt 4.17),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NF_TABLES_SET, $(P_XT)nf_tables_set, ge 4.18),))
+$(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NF_TABLES_SET, $(P_XT)nf_tables_set),))
$(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NFT_CHAIN_ROUTE_IPV4, $(P_V4)nft_chain_route_ipv4),))
$(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NFT_CHAIN_ROUTE_IPV6, $(P_V6)nft_chain_route_ipv6),))
$(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NFT_COUNTER, $(P_XT)nft_counter),))
$(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NFT_REDIR, $(P_XT)nft_redir),))
$(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NFT_REJECT, $(P_XT)nft_reject $(P_V4)nft_reject_ipv4 $(P_V6)nft_reject_ipv6),))
$(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NFT_REJECT_INET, $(P_XT)nft_reject_inet),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NFT_SET_HASH, $(P_XT)nft_set_hash, lt 4.18),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NFT_SET_RBTREE, $(P_XT)nft_set_rbtree, lt 4.18),))
-
-$(eval $(if $(NF_KMOD),$(call nf_add,NFT_ARP,CONFIG_NF_TABLES_ARP, $(P_V4)nf_tables_arp, lt 4.17),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NFT_BRIDGE,CONFIG_NF_TABLES_BRIDGE, $(P_EBT)nf_tables_bridge, lt 4.17),))
$(eval $(if $(NF_KMOD),$(call nf_add,NFT_BRIDGE,CONFIG_NFT_BRIDGE_META, $(P_EBT)nft_meta_bridge),))
$(eval $(if $(NF_KMOD),$(call nf_add,NFT_BRIDGE,CONFIG_NFT_BRIDGE_REJECT, $(P_EBT)nft_reject_bridge),))
+++ /dev/null
-#
-# Copyright (C) 2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=i2c-gpio-custom
-PKG_RELEASE:=3
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/i2c-gpio-custom
- SUBMENU:=I2C support
- TITLE:=Custom GPIO-based I2C device
- DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core +kmod-i2c-gpio @LINUX_4_14
- FILES:=$(PKG_BUILD_DIR)/i2c-gpio-custom.ko
- KCONFIG:=
-endef
-
-define KernelPackage/i2c-gpio-custom/description
- Kernel module for register a custom i2c-gpio platform device.
-endef
-
-EXTRA_KCONFIG:= \
- CONFIG_I2C_GPIO_CUSTOM=m
-
-EXTRA_CFLAGS:= \
- $(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=m,%,$(filter %=m,$(EXTRA_KCONFIG)))) \
- $(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=y,%,$(filter %=y,$(EXTRA_KCONFIG)))) \
-
-MAKE_OPTS:= \
- $(KERNEL_MAKE_FLAGS) \
- M="$(PKG_BUILD_DIR)" \
- EXTRA_CFLAGS="$(EXTRA_CFLAGS)" \
- $(EXTRA_KCONFIG)
-
-define Build/Compile
- $(MAKE) -C "$(LINUX_DIR)" \
- $(MAKE_OPTS) \
- modules
-endef
-
-$(eval $(call KernelPackage,i2c-gpio-custom))
+++ /dev/null
-config I2C_GPIO_CUSTOM
- tristate "Custom GPIO-based I2C driver"
- depends on GENERIC_GPIO
- select I2C_GPIO
- help
- This is an I2C driver to register 1 to 4 custom I2C buses using
- GPIO lines.
-
- This support is also available as a module. If so, the module
- will be called i2c-gpio-custom.
+++ /dev/null
-obj-${CONFIG_I2C_GPIO_CUSTOM} += i2c-gpio-custom.o
\ No newline at end of file
+++ /dev/null
-/*
- * Custom GPIO-based I2C driver
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * ---------------------------------------------------------------------------
- *
- * The behaviour of this driver can be altered by setting some parameters
- * from the insmod command line.
- *
- * The following parameters are adjustable:
- *
- * bus0 These four arguments can be arrays of
- * bus1 1-8 unsigned integers as follows:
- * bus2
- * bus3 <id>,<sda>,<scl>,<udelay>,<timeout>,<sda_od>,<scl_od>,<scl_oo>
- *
- * where:
- *
- * <id> ID to used as device_id for the corresponding bus (required)
- * <sda> GPIO pin ID to used for SDA (required)
- * <scl> GPIO pin ID to used for SCL (required)
- * <udelay> signal toggle delay.
- * <timeout> clock stretching timeout.
- * <sda_od> SDA is configured as open drain.
- * <scl_od> SCL is configured as open drain.
- * <scl_oo> SCL output drivers cannot be turned off.
- *
- * See include/i2c-gpio.h for more information about the parameters.
- *
- * If this driver is built into the kernel, you can use the following kernel
- * command line parameters, with the same values as the corresponding module
- * parameters listed above:
- *
- * i2c-gpio-custom.bus0
- * i2c-gpio-custom.bus1
- * i2c-gpio-custom.bus2
- * i2c-gpio-custom.bus3
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <linux/version.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 18, 0)
-#include <linux/i2c-gpio.h>
-#else
-#include <linux/platform_data/i2c-gpio.h>
-#endif
-
-#define DRV_NAME "i2c-gpio-custom"
-#define DRV_DESC "Custom GPIO-based I2C driver"
-#define DRV_VERSION "0.1.2"
-
-#define PFX DRV_NAME ": "
-
-#define BUS_PARAM_ID 0
-#define BUS_PARAM_SDA 1
-#define BUS_PARAM_SCL 2
-#define BUS_PARAM_UDELAY 3
-#define BUS_PARAM_TIMEOUT 4
-#define BUS_PARAM_SDA_OD 5
-#define BUS_PARAM_SCL_OD 6
-#define BUS_PARAM_SCL_OO 7
-
-#define BUS_PARAM_REQUIRED 3
-#define BUS_PARAM_COUNT 8
-#define BUS_COUNT_MAX 4
-
-static unsigned int bus0[BUS_PARAM_COUNT] __initdata;
-static unsigned int bus1[BUS_PARAM_COUNT] __initdata;
-static unsigned int bus2[BUS_PARAM_COUNT] __initdata;
-static unsigned int bus3[BUS_PARAM_COUNT] __initdata;
-
-static unsigned int bus_nump[BUS_COUNT_MAX] __initdata;
-
-#define BUS_PARM_DESC \
- " config -> id,sda,scl[,udelay,timeout,sda_od,scl_od,scl_oo]"
-
-module_param_array(bus0, uint, &bus_nump[0], 0);
-MODULE_PARM_DESC(bus0, "bus0" BUS_PARM_DESC);
-module_param_array(bus1, uint, &bus_nump[1], 0);
-MODULE_PARM_DESC(bus1, "bus1" BUS_PARM_DESC);
-module_param_array(bus2, uint, &bus_nump[2], 0);
-MODULE_PARM_DESC(bus2, "bus2" BUS_PARM_DESC);
-module_param_array(bus3, uint, &bus_nump[3], 0);
-MODULE_PARM_DESC(bus3, "bus3" BUS_PARM_DESC);
-
-static struct platform_device *devices[BUS_COUNT_MAX];
-static unsigned int nr_devices;
-
-static void i2c_gpio_custom_cleanup(void)
-{
- int i;
-
- for (i = 0; i < nr_devices; i++)
- if (devices[i])
- platform_device_unregister(devices[i]);
-}
-
-static int __init i2c_gpio_custom_add_one(unsigned int id, unsigned int *params)
-{
- struct platform_device *pdev;
- struct i2c_gpio_platform_data pdata;
- int err;
-
- if (!bus_nump[id])
- return 0;
-
- if (bus_nump[id] < BUS_PARAM_REQUIRED) {
- printk(KERN_ERR PFX "not enough parameters for bus%d\n", id);
- err = -EINVAL;
- goto err;
- }
-
- pdev = platform_device_alloc("i2c-gpio", params[BUS_PARAM_ID]);
- if (!pdev) {
- err = -ENOMEM;
- goto err;
- }
-
- pdata.sda_pin = params[BUS_PARAM_SDA];
- pdata.scl_pin = params[BUS_PARAM_SCL];
- pdata.udelay = params[BUS_PARAM_UDELAY];
- pdata.timeout = params[BUS_PARAM_TIMEOUT];
- pdata.sda_is_open_drain = params[BUS_PARAM_SDA_OD] != 0;
- pdata.scl_is_open_drain = params[BUS_PARAM_SCL_OD] != 0;
- pdata.scl_is_output_only = params[BUS_PARAM_SCL_OO] != 0;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto err_put;
-
- err = platform_device_add(pdev);
- if (err)
- goto err_put;
-
- devices[nr_devices++] = pdev;
- return 0;
-
-err_put:
- platform_device_put(pdev);
-err:
- return err;
-}
-
-static int __init i2c_gpio_custom_probe(void)
-{
- int err;
-
- printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
-
- err = i2c_gpio_custom_add_one(0, bus0);
- if (err)
- goto err;
-
- err = i2c_gpio_custom_add_one(1, bus1);
- if (err)
- goto err;
-
- err = i2c_gpio_custom_add_one(2, bus2);
- if (err)
- goto err;
-
- err = i2c_gpio_custom_add_one(3, bus3);
- if (err)
- goto err;
-
- if (!nr_devices) {
- printk(KERN_ERR PFX "no bus parameter(s) specified\n");
- err = -ENODEV;
- goto err;
- }
-
- return 0;
-
-err:
- i2c_gpio_custom_cleanup();
- return err;
-}
-
-#ifdef MODULE
-static int __init i2c_gpio_custom_init(void)
-{
- return i2c_gpio_custom_probe();
-}
-module_init(i2c_gpio_custom_init);
-
-static void __exit i2c_gpio_custom_exit(void)
-{
- i2c_gpio_custom_cleanup();
-}
-module_exit(i2c_gpio_custom_exit);
-#else
-subsys_initcall(i2c_gpio_custom_probe);
-#endif /* MODULE*/
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org >");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
+++ /dev/null
-#
-# Copyright (C) 2016 LEDE
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=sched-cake-oot
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/dtaht/sch_cake.git
-PKG_SOURCE_DATE:=2020-07-24
-PKG_SOURCE_VERSION:=48979385757f3408c3427b3ebbf5963efdada5aa
-PKG_MIRROR_HASH:=0e8ed53f55e28ad0c30f20293c16988876bae8d6f70f5629a43cf2ce1e49fc51
-PKG_MAINTAINER:=Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/sched-cake-oot
- SUBMENU:=Network Support
- TITLE:=OOT Cake fq_codel/blue derived shaper
- URL:=https://github.com/dtaht/sch_cake
- FILES:=$(PKG_BUILD_DIR)/sch_cake.ko
- AUTOLOAD:=$(call AutoLoad,75,sch_cake)
- DEPENDS:=@LINUX_4_14 +kmod-sched-core +kmod-ipt-conntrack
-endef
-
-define KernelPackage/sched-cake-oot/description
- O(ut) O(f) T(ree) Common Applications Kept Enhanced fq_codel/blue derived shaper
-endef
-
-define KernelPackage/sched-cake-virtual
- SUBMENU:=Network Support
- TITLE:=Virtual package for sched-cake
- URL:=https://github.com/dtaht/sch_cake
- DEPENDS:=+!LINUX_4_14:kmod-sched-cake +LINUX_4_14:kmod-sched-cake-oot
-endef
-
-define KernelPackage/sched-cake-virtual/description
- Virtual package for resolving sch_cake dependencies
-endef
-
-include $(INCLUDE_DIR)/kernel-defaults.mk
-
-define Build/Compile
- $(KERNEL_MAKE) M="$(PKG_BUILD_DIR)" modules
-endef
-
-$(eval $(call KernelPackage,sched-cake-oot))
-$(eval $(call KernelPackage,sched-cake-virtual))
TITLE:=Kvaser CAN/USB interface
KCONFIG:=CONFIG_CAN_KVASER_USB
FILES:= \
- $(LINUX_DIR)/drivers/net/can/usb/kvaser_usb.ko@lt4.19 \
- $(LINUX_DIR)/drivers/net/can/usb/kvaser_usb/kvaser_usb.ko@ge4.19
+ $(LINUX_DIR)/drivers/net/can/usb/kvaser_usb/kvaser_usb.ko
AUTOLOAD:=$(call AutoProbe,kvaser_usb)
$(call AddDepends/can,+kmod-usb-core)
endef
define KernelPackage/crypto-hw-safexcel
TITLE:= MVEBU SafeXcel Crypto Engine module
- DEPENDS:=@!LINUX_4_14 @(TARGET_mvebu_cortexa53||TARGET_mvebu_cortexa72) +eip197-mini-firmware \
+ DEPENDS:=@(TARGET_mvebu_cortexa53||TARGET_mvebu_cortexa72) +eip197-mini-firmware \
+kmod-crypto-authenc +kmod-crypto-md5 +kmod-crypto-hmac +kmod-crypto-sha256 +kmod-crypto-sha512
KCONFIG:= \
CONFIG_CRYPTO_HW=y \
$(LINUX_DIR)/arch/x86/crypto/twofish-i586.ko \
$(LINUX_DIR)/arch/x86/crypto/serpent-sse2-i586.ko \
$(LINUX_DIR)/arch/x86/crypto/glue_helper.ko \
- $(LINUX_DIR)/crypto/ablk_helper.ko@lt4.17 \
$(LINUX_DIR)/crypto/cryptd.ko \
- $(LINUX_DIR)/crypto/lrw.ko@lt4.17 \
- $(LINUX_DIR)/crypto/crypto_simd.ko@ge4.17
+ $(LINUX_DIR)/crypto/crypto_simd.ko
AUTOLOAD+= $(call AutoLoad,10,cryptd glue_helper \
serpent-sse2-i586 twofish-i586 blowfish_generic)
endef
$(LINUX_DIR)/arch/x86/crypto/twofish-avx-x86_64.ko \
$(LINUX_DIR)/arch/x86/crypto/serpent-avx-x86_64.ko \
$(LINUX_DIR)/arch/x86/crypto/camellia-aesni-avx2.ko \
- $(LINUX_DIR)/arch/x86/crypto/serpent-avx2.ko \
- $(LINUX_DIR)/crypto/ablk_helper.ko@lt4.17
+ $(LINUX_DIR)/arch/x86/crypto/serpent-avx2.ko
AUTOLOAD+= $(call AutoLoad,10,camellia-x86_64 \
camellia-aesni-avx-x86_64 camellia-aesni-avx2 cast5-avx-x86_64 \
cast6-avx-x86_64 twofish-x86_64 twofish-x86_64-3way \
CONFIG_AUTOFS4_FS \
CONFIG_AUTOFS_FS
FILES:= \
- $(LINUX_DIR)/fs/autofs4/autofs4.ko@lt4.18 \
- $(LINUX_DIR)/fs/autofs/autofs4.ko@ge4.18
+ $(LINUX_DIR)/fs/autofs/autofs4.ko
AUTOLOAD:=$(call AutoLoad,30,autofs4)
endef
define KernelPackage/fs-f2fs
SUBMENU:=$(FS_MENU)
TITLE:=F2FS filesystem support
- DEPENDS:= +kmod-crypto-hash +kmod-crypto-crc32 +LINUX_5_4:kmod-nls-base
+ DEPENDS:= +kmod-crypto-hash +kmod-crypto-crc32 +!LINUX_4_19:kmod-nls-base
KCONFIG:= \
CONFIG_F2FS_FS \
CONFIG_F2FS_STAT_FS=y \
define KernelPackage/iio-bme680
SUBMENU:=$(IIO_MENU)
TITLE:=BME680 gas/humidity/pressure/temperature sensor
- DEPENDS:=@!LINUX_4_14 +kmod-iio-core +kmod-regmap-core
+ DEPENDS:=+kmod-iio-core +kmod-regmap-core
KCONFIG:=CONFIG_BME680
FILES:=$(LINUX_DIR)/drivers/iio/chemical/bme680_core.ko
endef
define KernelPackage/iio-sps30
SUBMENU:=$(IIO_MENU)
- DEPENDS:=@!LINUX_4_14 +kmod-i2c-core +kmod-iio-core +kmod-industrialio-triggered-buffer +kmod-lib-crc8
+ DEPENDS:=+kmod-i2c-core +kmod-iio-core +kmod-industrialio-triggered-buffer +kmod-lib-crc8
TITLE:=Sensirion SPS30 particulate matter sensor
KCONFIG:=CONFIG_SPS30
FILES:=$(LINUX_DIR)/drivers/iio/chemical/sps30.ko
define KernelPackage/r8169
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=RealTek RTL-8169 PCI Gigabit Ethernet Adapter kernel support
- DEPENDS:=@PCI_SUPPORT +kmod-mii +r8169-firmware +!LINUX_4_14:kmod-phy-realtek
+ DEPENDS:=@PCI_SUPPORT +kmod-mii +r8169-firmware +kmod-phy-realtek
KCONFIG:=CONFIG_R8169 \
CONFIG_R8169_NAPI=y \
CONFIG_R8169_VLAN=n
define KernelPackage/ixgbe
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=Intel(R) 82598/82599 PCI-Express 10 Gigabit Ethernet support
- DEPENDS:=@PCI_SUPPORT +kmod-mdio +kmod-ptp +kmod-hwmon-core +LINUX_5_4:kmod-libphy
+ DEPENDS:=@PCI_SUPPORT +kmod-mdio +kmod-ptp +kmod-hwmon-core +!LINUX_4_19:kmod-libphy
KCONFIG:=CONFIG_IXGBE \
CONFIG_IXGBE_VXLAN=n \
CONFIG_IXGBE_HWMON=y \
define KernelPackage/i40e
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=Intel(R) Ethernet Controller XL710 Family support
- DEPENDS:=@PCI_SUPPORT +kmod-mdio +kmod-ptp +kmod-hwmon-core +LINUX_5_4:kmod-libphy
+ DEPENDS:=@PCI_SUPPORT +kmod-mdio +kmod-ptp +kmod-hwmon-core +!LINUX_4_19:kmod-libphy
KCONFIG:=CONFIG_I40E \
CONFIG_I40E_VXLAN=n \
CONFIG_I40E_HWMON=y \
define KernelPackage/gigaset
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=Siemens Gigaset support for isdn4linux
- DEPENDS:=@USB_SUPPORT +kmod-isdn4linux +kmod-lib-crc-ccitt +kmod-usb-core @!LINUX_5_4
+ DEPENDS:=@USB_SUPPORT +kmod-isdn4linux +kmod-lib-crc-ccitt +kmod-usb-core @LINUX_4_19
URL:=http://gigaset307x.sourceforge.net/
KCONFIG:= \
CONFIG_ISDN_DRV_GIGASET \
define KernelPackage/nf-ipvs
SUBMENU:=Netfilter Extensions
TITLE:=IP Virtual Server modules
- DEPENDS:=@IPV6 +kmod-lib-crc32c +kmod-ipt-conntrack +kmod-nf-conntrack +LINUX_4_14:kmod-nf-conntrack6
+ DEPENDS:=@IPV6 +kmod-lib-crc32c +kmod-ipt-conntrack +kmod-nf-conntrack
KCONFIG:= \
CONFIG_IP_VS \
CONFIG_IP_VS_IPV6=y \
KCONFIG:=$(KCONFIG_NF_NATHELPER_EXTRA)
FILES:=$(foreach mod,$(NF_NATHELPER_EXTRA-m),$(LINUX_DIR)/net/$(mod).ko)
AUTOLOAD:=$(call AutoProbe,$(notdir $(NF_NATHELPER_EXTRA-m)))
- DEPENDS:=+kmod-nf-nat +kmod-lib-textsearch +kmod-ipt-raw +!LINUX_4_14:kmod-asn1-decoder
+ DEPENDS:=+kmod-nf-nat +kmod-lib-textsearch +kmod-ipt-raw +kmod-asn1-decoder
endef
define KernelPackage/nf-nathelper-extra/description
define KernelPackage/nft-core
SUBMENU:=$(NF_MENU)
TITLE:=Netfilter nf_tables support
- DEPENDS:=+kmod-nfnetlink +kmod-nf-reject +IPV6:kmod-nf-reject6 +IPV6:kmod-nf-conntrack6 +LINUX_5_4:kmod-nf-nat
+ DEPENDS:=+kmod-nfnetlink +kmod-nf-reject +IPV6:kmod-nf-reject6 +IPV6:kmod-nf-conntrack6 +!LINUX_4_19:kmod-nf-nat
FILES:=$(foreach mod,$(NFT_CORE-m),$(LINUX_DIR)/net/$(mod).ko)
AUTOLOAD:=$(call AutoProbe,$(notdir $(NFT_CORE-m)))
KCONFIG:= \
CONFIG_NFT_DUP_NETDEV \
CONFIG_NFT_FWD_NETDEV
FILES:= \
- $(LINUX_DIR)/net/netfilter/nf_tables_netdev.ko@lt4.17 \
$(LINUX_DIR)/net/netfilter/nf_dup_netdev.ko \
$(LINUX_DIR)/net/netfilter/nft_dup_netdev.ko \
$(LINUX_DIR)/net/netfilter/nft_fwd_netdev.ko
define KernelPackage/xfrm-interface
SUBMENU:=$(NETWORK_SUPPORT_MENU)
TITLE:=IPsec XFRM Interface
- DEPENDS:=+kmod-ipsec4 +IPV6:kmod-ipsec6 @!LINUX_4_14
+ DEPENDS:=+kmod-ipsec4 +IPV6:kmod-ipsec6
KCONFIG:=CONFIG_XFRM_INTERFACE
FILES:=$(LINUX_DIR)/net/xfrm/xfrm_interface.ko
AUTOLOAD:=$(call AutoProbe,xfrm_interface)
define KernelPackage/sched-cake
SUBMENU:=$(NETWORK_SUPPORT_MENU)
TITLE:=Cake fq_codel/blue derived shaper
- DEPENDS:=@!LINUX_4_14 +kmod-sched-core
+ DEPENDS:=+kmod-sched-core
KCONFIG:=CONFIG_NET_SCH_CAKE
FILES:=$(LINUX_DIR)/net/sched/sch_cake.ko
AUTOLOAD:=$(call AutoProbe,sch_cake)
define KernelPackage/mpls
SUBMENU:=$(NETWORK_SUPPORT_MENU)
TITLE:=MPLS support
- DEPENDS:=+!LINUX_4_14:kmod-iptunnel
+ DEPENDS:=+kmod-iptunnel
KCONFIG:= \
CONFIG_MPLS=y \
CONFIG_LWTUNNEL=y \
define KernelPackage/nvmem
SUBMENU:=$(OTHER_MENU)
TITLE:=Non Volatile Memory support
- DEPENDS:=@!LINUX_5_4
+ DEPENDS:=@LINUX_4_19
KCONFIG:=CONFIG_NVMEM
HIDDEN:=1
FILES:=$(LINUX_DIR)/drivers/nvmem/nvmem_core.ko
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM AT24 support
KCONFIG:=CONFIG_EEPROM_AT24
- DEPENDS:=+kmod-i2c-core +!LINUX_5_4:kmod-nvmem +!LINUX_4_14:kmod-regmap-i2c
+ DEPENDS:=+kmod-i2c-core +LINUX_4_19:kmod-nvmem +kmod-regmap-i2c
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
AUTOLOAD:=$(call AutoProbe,at24)
endef
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM AT25 support
KCONFIG:=CONFIG_EEPROM_AT25
- DEPENDS:=+!LINUX_5_4:kmod-nvmem
+ DEPENDS:=+LINUX_4_19:kmod-nvmem
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
AUTOLOAD:=$(call AutoProbe,at25)
endef
define KernelPackage/gpio-pca953x
SUBMENU:=$(OTHER_MENU)
- DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core +LINUX_5_4:kmod-regmap-i2c
+ DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core +!LINUX_4_19:kmod-regmap-i2c
TITLE:=PCA95xx, TCA64xx, and MAX7310 I/O ports
KCONFIG:=CONFIG_GPIO_PCA953X
FILES:=$(LINUX_DIR)/drivers/gpio/gpio-pca953x.ko
SUBMENU:=$(OTHER_MENU)
TITLE:=Philips PCF2123 RTC support
DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
- DEPENDS:=+LINUX_5_4:kmod-regmap-spi
+ DEPENDS:=+!LINUX_4_19:kmod-regmap-spi
KCONFIG:=CONFIG_RTC_DRV_PCF2123 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
$(eval $(call KernelPackage,ptp))
-define KernelPackage/ptp-gianfar
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Freescale Gianfar PTP support
- DEPENDS:=@TARGET_mpc85xx +kmod-ptp @LINUX_4_14
- KCONFIG:=CONFIG_PTP_1588_CLOCK_GIANFAR
- FILES:=$(LINUX_DIR)/drivers/net/ethernet/freescale/gianfar_ptp.ko
- AUTOLOAD:=$(call AutoProbe,gianfar_ptp)
-endef
-
-define KernelPackage/ptp-gianfar/description
- Kernel module for IEEE 1588 support for Freescale
- Gianfar Ethernet drivers
-endef
-
-$(eval $(call KernelPackage,ptp-gianfar))
-
define KernelPackage/ptp-qoriq
SUBMENU:=$(OTHER_MENU)
TITLE:=Freescale QorIQ PTP support
- DEPENDS:=@TARGET_mpc85xx +kmod-ptp @!LINUX_4_14
+ DEPENDS:=@TARGET_mpc85xx +kmod-ptp
KCONFIG:=CONFIG_PTP_1588_CLOCK_QORIQ
FILES:=$(LINUX_DIR)/drivers/ptp/ptp-qoriq.ko
AUTOLOAD:=$(call AutoProbe,ptp-qoriq)
$(eval $(call KernelPackage,random-core))
-define KernelPackage/random-tpm
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Hardware Random Number Generator TPM support
- KCONFIG:=CONFIG_HW_RANDOM_TPM
- FILES:=$(LINUX_DIR)/drivers/char/hw_random/tpm-rng.ko
- DEPENDS:= +kmod-random-core +kmod-tpm @LINUX_4_14
- AUTOLOAD:=$(call AutoProbe,tpm-rng)
-endef
-
-define KernelPackage/random-tpm/description
- Kernel module for the Random Number Generator
- in the Trusted Platform Module.
-endef
-
-$(eval $(call KernelPackage,random-tpm))
-
define KernelPackage/thermal
SUBMENU:=$(OTHER_MENU)
TITLE:=Generic Thermal sysfs driver
define KernelPackage/tpm
SUBMENU:=$(OTHER_MENU)
TITLE:=TPM Hardware Support
- DEPENDS:= +!LINUX_4_14:kmod-random-core
+ DEPENDS:= +kmod-random-core
KCONFIG:= CONFIG_TCG_TPM
FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm.ko
AUTOLOAD:=$(call AutoLoad,10,tpm,1)
$(eval $(call KernelPackage,usb-dwc3))
-define KernelPackage/usb-dwc3-of-simple
- TITLE:=DWC3 USB simple OF driver
- DEPENDS:=@LINUX_4_14 @(TARGET_ipq40xx||TARGET_ipq806x) +kmod-usb-dwc3
- KCONFIG:= CONFIG_USB_DWC3_OF_SIMPLE
- FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-of-simple.ko
- AUTOLOAD:=$(call AutoLoad,53,dwc3-of-simple,1)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-dwc3-of-simple/description
- This driver provides generic platform glue for the integrated DesignWare
- USB3 IP Core.
-endef
-
-
-$(eval $(call KernelPackage,usb-dwc3-of-simple))
-
-
define KernelPackage/usb-dwc3-qcom
TITLE:=DWC3 Qualcomm USB driver
- DEPENDS:=@(!LINUX_4_14) @(TARGET_ipq40xx||TARGET_ipq806x) +kmod-usb-dwc3
+ DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x) +kmod-usb-dwc3
KCONFIG:= CONFIG_USB_DWC3_QCOM
FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-qcom.ko
AUTOLOAD:=$(call AutoLoad,53,dwc3-qcom,1)
FILES:= \
$(LINUX_DIR)/drivers/extcon/extcon-core.ko \
$(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc.ko \
- $(LINUX_DIR)/drivers/usb/common/ulpi.ko@ge4.18 \
+ $(LINUX_DIR)/drivers/usb/common/ulpi.ko \
$(LINUX_DIR)/drivers/usb/roles/roles.ko@ge5.0
AUTOLOAD:=$(call AutoLoad,39,ci_hdrc,1)
$(call AddDepends/usb)
KCONFIG:=CONFIG_DRM
FILES:= \
$(LINUX_DIR)/drivers/gpu/drm/drm.ko \
- $(LINUX_DIR)/drivers/gpu/drm/drm_panel_orientation_quirks.ko@ge4.15
+ $(LINUX_DIR)/drivers/gpu/drm/drm_panel_orientation_quirks.ko
AUTOLOAD:=$(call AutoLoad,05,drm)
endef
CONFIG_DRM_AMD_DC=y \
CONFIG_DEBUG_KERNEL_DC=n
FILES:=$(LINUX_DIR)/drivers/gpu/drm/amd/amdgpu/amdgpu.ko \
- $(LINUX_DIR)/drivers/gpu/drm/scheduler/gpu-sched.ko@ge4.15 \
+ $(LINUX_DIR)/drivers/gpu/drm/scheduler/gpu-sched.ko \
$(LINUX_DIR)/drivers/gpu/drm/amd/lib/chash.ko@lt5.3
AUTOLOAD:=$(call AutoProbe,amdgpu)
endef
CONFIG_VIDEOBUF2_MEMOPS \
CONFIG_VIDEOBUF2_VMALLOC
FILES:= \
- $(LINUX_DIR)/drivers/media/$(V4L2_DIR)/videobuf2-core.ko@lt4.16 \
- $(LINUX_DIR)/drivers/media/$(V4L2_DIR)/videobuf2-v4l2.ko@lt4.16 \
- $(LINUX_DIR)/drivers/media/$(V4L2_DIR)/videobuf2-memops.ko@lt4.16 \
- $(LINUX_DIR)/drivers/media/$(V4L2_DIR)/videobuf2-vmalloc.ko@lt4.16 \
- $(LINUX_DIR)/drivers/media/common/videobuf2/videobuf2-common.ko@ge4.16 \
- $(LINUX_DIR)/drivers/media/common/videobuf2/videobuf2-v4l2.ko@ge4.16 \
- $(LINUX_DIR)/drivers/media/common/videobuf2/videobuf2-memops.ko@ge4.16 \
- $(LINUX_DIR)/drivers/media/common/videobuf2/videobuf2-vmalloc.ko@ge4.16
+ $(LINUX_DIR)/drivers/media/common/videobuf2/videobuf2-common.ko \
+ $(LINUX_DIR)/drivers/media/common/videobuf2/videobuf2-v4l2.ko \
+ $(LINUX_DIR)/drivers/media/common/videobuf2/videobuf2-memops.ko \
+ $(LINUX_DIR)/drivers/media/common/videobuf2/videobuf2-vmalloc.ko
AUTOLOAD:=$(call AutoLoad,65,videobuf2-core videobuf-v4l2 videobuf2-memops videobuf2-vmalloc)
$(call AddDepends/video)
endef
define KernelPackage/video-gspca-core
MENU:=1
TITLE:=GSPCA webcam core support framework
- DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-input-core +!LINUX_4_14:kmod-video-videobuf2
+ DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-input-core +kmod-video-videobuf2
KCONFIG:=CONFIG_USB_GSPCA
FILES:=$(LINUX_DIR)/drivers/media/$(V4L2_USB_DIR)/gspca/gspca_main.ko
AUTOLOAD:=$(call AutoProbe,gspca_main)
+++ /dev/null
-#
-# Copyright (C) 2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=spi-gpio-custom
-PKG_RELEASE:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/spi-gpio-custom
- SUBMENU:=SPI Support
- TITLE:=Custom GPIO-based SPI device
- DEPENDS:=@GPIO_SUPPORT +kmod-spi-bitbang +kmod-spi-gpio +kmod-spi-dev @LINUX_4_14
- FILES:=$(PKG_BUILD_DIR)/spi-gpio-custom.ko
- KCONFIG:=
-endef
-
-define KernelPackage/spi-gpio-custom/description
- Kernel module for register a custom spi-gpio platform device.
-endef
-
-EXTRA_KCONFIG:= \
- CONFIG_SPI_GPIO_CUSTOM=m
-
-EXTRA_CFLAGS:= \
- $(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=m,%,$(filter %=m,$(EXTRA_KCONFIG)))) \
- $(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=y,%,$(filter %=y,$(EXTRA_KCONFIG)))) \
-
-MAKE_OPTS:= \
- $(KERNEL_MAKE_FLAGS) \
- M="$(PKG_BUILD_DIR)" \
- EXTRA_CFLAGS="$(EXTRA_CFLAGS)" \
- $(EXTRA_KCONFIG)
-
-define Build/Compile
- $(MAKE) -C "$(LINUX_DIR)" \
- $(MAKE_OPTS) \
- modules
-endef
-
-$(eval $(call KernelPackage,spi-gpio-custom))
+++ /dev/null
-config SPI_GPIO_CUSTOM
- tristate "Custom GPIO-based SPI driver"
- depends on GENERIC_GPIO
- select SPI_GPIO
- help
- This is an SPI driver to register 1 to 4 custom SPI buses using
- GPIO lines. Each bus can have up to 8 slaves.
- The devices will be exposed to userspace as /dev/spidevX.X
-
- This module is maily intended to interface microcontrollers
- and other SPI devices without a specific kernel driver.
-
- This support is also available as a module. If so, the module
- will be called spi-gpio-custom.
+++ /dev/null
-obj-${CONFIG_SPI_GPIO_CUSTOM} += spi-gpio-custom.o
\ No newline at end of file
+++ /dev/null
-/*
- * Custom GPIO-based SPI driver
- *
- * Copyright (C) 2013 Marco Burato <zmaster.adsl@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Based on i2c-gpio-custom by:
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- * ---------------------------------------------------------------------------
- *
- * The behaviour of this driver can be altered by setting some parameters
- * from the insmod command line.
- *
- * The following parameters are adjustable:
- *
- * bus0 These four arguments can be arrays of
- * bus1 1-8 unsigned integers as follows:
- * bus2
- * bus3 <id>,<sck>,<mosi>,<miso>,<mode1>,<maxfreq1>,<cs1>,...
- *
- * where:
- *
- * <id> ID to used as device_id for the corresponding bus (required)
- * <sck> GPIO pin ID to be used for bus SCK (required)
- * <mosi> GPIO pin ID to be used for bus MOSI (required*)
- * <miso> GPIO pin ID to be used for bus MISO (required*)
- * <modeX> Mode configuration for slave X in the bus (required)
- * (see /include/linux/spi/spi.h)
- * <maxfreqX> Maximum clock frequency in Hz for slave X in the bus (required)
- * <csX> GPIO pin ID to be used for slave X CS (required**)
- *
- * Notes:
- * * If a signal is not used (for example there is no MISO) you need
- * to set the GPIO pin ID for that signal to an invalid value.
- * ** If you only have 1 slave in the bus with no CS, you can omit the
- * <cs1> param or set it to an invalid GPIO id to disable it. When
- * you have 2 or more slaves, they must all have a valid CS.
- *
- * If this driver is built into the kernel, you can use the following kernel
- * command line parameters, with the same values as the corresponding module
- * parameters listed above:
- *
- * spi-gpio-custom.bus0
- * spi-gpio-custom.bus1
- * spi-gpio-custom.bus2
- * spi-gpio-custom.bus3
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-
-#define DRV_NAME "spi-gpio-custom"
-#define DRV_DESC "Custom GPIO-based SPI driver"
-#define DRV_VERSION "0.1"
-
-#define PFX DRV_NAME ": "
-
-#define BUS_PARAM_ID 0
-#define BUS_PARAM_SCK 1
-#define BUS_PARAM_MOSI 2
-#define BUS_PARAM_MISO 3
-#define BUS_PARAM_MODE1 4
-#define BUS_PARAM_MAXFREQ1 5
-#define BUS_PARAM_CS1 6
-
-#define BUS_SLAVE_COUNT_MAX 8
-#define BUS_PARAM_REQUIRED 6
-#define BUS_PARAM_PER_SLAVE 3
-#define BUS_PARAM_COUNT (4+BUS_PARAM_PER_SLAVE*BUS_SLAVE_COUNT_MAX)
-#define BUS_COUNT_MAX 4
-
-static unsigned int bus0[BUS_PARAM_COUNT] __initdata;
-static unsigned int bus1[BUS_PARAM_COUNT] __initdata;
-static unsigned int bus2[BUS_PARAM_COUNT] __initdata;
-static unsigned int bus3[BUS_PARAM_COUNT] __initdata;
-
-static unsigned int bus_nump[BUS_COUNT_MAX] __initdata;
-
-#define BUS_PARM_DESC \
- " config -> id,sck,mosi,miso,mode1,maxfreq1[,cs1,mode2,maxfreq2,cs2,...]"
-
-module_param_array(bus0, uint, &bus_nump[0], 0);
-MODULE_PARM_DESC(bus0, "bus0" BUS_PARM_DESC);
-module_param_array(bus1, uint, &bus_nump[1], 0);
-MODULE_PARM_DESC(bus1, "bus1" BUS_PARM_DESC);
-module_param_array(bus2, uint, &bus_nump[2], 0);
-MODULE_PARM_DESC(bus2, "bus2" BUS_PARM_DESC);
-module_param_array(bus3, uint, &bus_nump[3], 0);
-MODULE_PARM_DESC(bus3, "bus3" BUS_PARM_DESC);
-
-static struct platform_device *devices[BUS_COUNT_MAX];
-static unsigned int nr_devices;
-
-static void spi_gpio_custom_cleanup(void)
-{
- int i;
-
- for (i = 0; i < nr_devices; i++)
- if (devices[i])
- platform_device_unregister(devices[i]);
-}
-
-static int __init spi_gpio_custom_get_slave_mode(unsigned int id,
- unsigned int *params,
- int slave_index)
-{
- int param_index;
-
- param_index = BUS_PARAM_MODE1+slave_index*BUS_PARAM_PER_SLAVE;
- if (param_index >= bus_nump[id])
- return -1;
-
- return params[param_index];
-}
-static int __init spi_gpio_custom_get_slave_maxfreq(unsigned int id,
- unsigned int *params,
- int slave_index)
-{
- int param_index;
-
- param_index = BUS_PARAM_MAXFREQ1+slave_index*BUS_PARAM_PER_SLAVE;
- if (param_index >= bus_nump[id])
- return -1;
-
- return params[param_index];
-}
-static int __init spi_gpio_custom_get_slave_cs(unsigned int id,
- unsigned int *params,
- int slave_index)
-{
- int param_index;
-
- param_index = BUS_PARAM_CS1+slave_index*BUS_PARAM_PER_SLAVE;
- if (param_index >= bus_nump[id])
- return -1;
- if (!gpio_is_valid(params[param_index]))
- return -1;
-
- return params[param_index];
-}
-
-static int __init spi_gpio_custom_check_params(unsigned int id, unsigned int *params)
-{
- int i;
- struct spi_master *master;
-
- if (bus_nump[id] < BUS_PARAM_REQUIRED) {
- printk(KERN_ERR PFX "not enough values for parameter bus%d\n",
- id);
- return -EINVAL;
- }
-
- if (bus_nump[id] > (1+BUS_PARAM_CS1)) {
- /* more than 1 device: check CS GPIOs */
- for (i = 0; i < BUS_SLAVE_COUNT_MAX; i++) {
- /* no more slaves? */
- if (spi_gpio_custom_get_slave_mode(id, params, i) < 0)
- break;
-
- if (spi_gpio_custom_get_slave_cs(id, params, i) < 0) {
- printk(KERN_ERR PFX "invalid/missing CS gpio for slave %d on bus %d\n",
- i, params[BUS_PARAM_ID]);
- return -EINVAL;
- }
- }
- }
-
- if (!gpio_is_valid(params[BUS_PARAM_SCK])) {
- printk(KERN_ERR PFX "invalid SCK gpio for bus %d\n",
- params[BUS_PARAM_ID]);
- return -EINVAL;
- }
-
- master = spi_busnum_to_master(params[BUS_PARAM_ID]);
- if (master) {
- spi_master_put(master);
- printk(KERN_ERR PFX "bus %d already exists\n",
- params[BUS_PARAM_ID]);
- return -EEXIST;
- }
-
- return 0;
-}
-
-static int __init spi_gpio_custom_add_one(unsigned int id, unsigned int *params)
-{
- struct platform_device *pdev;
- struct spi_gpio_platform_data pdata;
- int i;
- int num_cs;
- int err;
- struct spi_master *master;
- struct spi_device *slave;
- struct spi_board_info slave_info;
- int mode, maxfreq, cs;
-
-
- if (!bus_nump[id])
- return 0;
-
- err = spi_gpio_custom_check_params(id, params);
- if (err)
- goto err;
-
- /* Create BUS device node */
-
- pdev = platform_device_alloc("spi_gpio", params[BUS_PARAM_ID]);
- if (!pdev) {
- err = -ENOMEM;
- goto err;
- }
-
- num_cs = 0;
- for (i = 0; i < BUS_SLAVE_COUNT_MAX; i++) {
- /* no more slaves? */
- if (spi_gpio_custom_get_slave_mode(id, params, i) < 0)
- break;
-
- if (spi_gpio_custom_get_slave_cs(id, params, i) >= 0)
- num_cs++;
- }
- if (num_cs == 0) {
- /*
- * Even if no CS is used, spi modules expect
- * at least 1 (unused)
- */
- num_cs = 1;
- }
-
- pdata.sck = params[BUS_PARAM_SCK];
- pdata.mosi = gpio_is_valid(params[BUS_PARAM_MOSI])
- ? params[BUS_PARAM_MOSI]
- : SPI_GPIO_NO_MOSI;
- pdata.miso = gpio_is_valid(params[BUS_PARAM_MISO])
- ? params[BUS_PARAM_MISO]
- : SPI_GPIO_NO_MISO;
- pdata.num_chipselect = num_cs;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err) {
- platform_device_put(pdev);
- goto err;
- }
-
- err = platform_device_add(pdev);
- if (err) {
- printk(KERN_ERR PFX "platform_device_add failed with return code %d\n",
- err);
- platform_device_put(pdev);
- goto err;
- }
-
- /* Register SLAVE devices */
-
- for (i = 0; i < BUS_SLAVE_COUNT_MAX; i++) {
- mode = spi_gpio_custom_get_slave_mode(id, params, i);
- maxfreq = spi_gpio_custom_get_slave_maxfreq(id, params, i);
- cs = spi_gpio_custom_get_slave_cs(id, params, i);
-
- /* no more slaves? */
- if (mode < 0)
- break;
-
- memset(&slave_info, 0, sizeof(slave_info));
- strcpy(slave_info.modalias, "spidev");
- slave_info.controller_data = (void *)((cs >= 0)
- ? cs
- : SPI_GPIO_NO_CHIPSELECT);
- slave_info.max_speed_hz = maxfreq;
- slave_info.bus_num = params[BUS_PARAM_ID];
- slave_info.chip_select = i;
- slave_info.mode = mode;
-
- master = spi_busnum_to_master(params[BUS_PARAM_ID]);
- if (!master) {
- printk(KERN_ERR PFX "unable to get master for bus %d\n",
- params[BUS_PARAM_ID]);
- err = -EINVAL;
- goto err_unregister;
- }
- slave = spi_new_device(master, &slave_info);
- spi_master_put(master);
- if (!slave) {
- printk(KERN_ERR PFX "unable to create slave %d for bus %d\n",
- i, params[BUS_PARAM_ID]);
- /* Will most likely fail due to unsupported mode bits */
- err = -EINVAL;
- goto err_unregister;
- }
- }
-
- devices[nr_devices++] = pdev;
-
- return 0;
-
-err_unregister:
- platform_device_unregister(pdev);
-err:
- return err;
-}
-
-static int __init spi_gpio_custom_probe(void)
-{
- int err;
-
- printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
-
- err = spi_gpio_custom_add_one(0, bus0);
- if (err)
- goto err;
-
- err = spi_gpio_custom_add_one(1, bus1);
- if (err)
- goto err;
-
- err = spi_gpio_custom_add_one(2, bus2);
- if (err)
- goto err;
-
- err = spi_gpio_custom_add_one(3, bus3);
- if (err)
- goto err;
-
- if (!nr_devices) {
- printk(KERN_ERR PFX "no bus parameter(s) specified\n");
- err = -ENODEV;
- goto err;
- }
-
- return 0;
-
-err:
- spi_gpio_custom_cleanup();
- return err;
-}
-
-#ifdef MODULE
-static int __init spi_gpio_custom_init(void)
-{
- return spi_gpio_custom_probe();
-}
-module_init(spi_gpio_custom_init);
-
-static void __exit spi_gpio_custom_exit(void)
-{
- spi_gpio_custom_cleanup();
-}
-module_exit(spi_gpio_custom_exit);
-#else
-subsys_initcall(spi_gpio_custom_probe);
-#endif /* MODULE*/
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Marco Burato <zmaster.adsl@gmail.com>");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
+++ /dev/null
-#
-# Copyright (C) 2008-2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=w1-gpio-custom
-PKG_RELEASE:=4
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/w1-gpio-custom
- SUBMENU:=W1 support
- TITLE:=Custom GPIO-based 1-wire device
- DEPENDS:=kmod-w1 +kmod-w1-master-gpio @LINUX_4_14
- FILES:=$(PKG_BUILD_DIR)/w1-gpio-custom.ko
- KCONFIG:=
-endef
-
-define KernelPackage/w1-gpio-custom/description
- Kernel module to register a custom w1-gpio platform device.
-endef
-
-EXTRA_KCONFIG:= \
- CONFIG_W1_MASTER_GPIO_CUSTOM=m
-
-EXTRA_CFLAGS:= \
- $(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=m,%,$(filter %=m,$(EXTRA_KCONFIG)))) \
- $(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=y,%,$(filter %=y,$(EXTRA_KCONFIG))))
-
-MAKE_OPTS:= \
- $(KERNEL_MAKE_FLAGS) \
- M="$(PKG_BUILD_DIR)" \
- EXTRA_CFLAGS="$(EXTRA_CFLAGS)" \
- $(EXTRA_KCONFIG)
-
-define Build/Compile
- $(MAKE) -C "$(LINUX_DIR)" \
- $(MAKE_OPTS) \
- modules
-endef
-
-$(eval $(call KernelPackage,w1-gpio-custom))
-
+++ /dev/null
-config W1_MASTER_GPIO_CUSTOM
- tristate "Custom GPIO-based W1 driver"
- depends on GENERIC_GPIO
- select W1_GPIO
\ No newline at end of file
+++ /dev/null
-obj-${CONFIG_W1_MASTER_GPIO_CUSTOM} += w1-gpio-custom.o
\ No newline at end of file
+++ /dev/null
-/*
- * Custom GPIO-based W1 driver
- *
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- * Copyright (C) 2008 Bifferos <bifferos at yahoo.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * ---------------------------------------------------------------------------
- *
- * The behaviour of this driver can be altered by setting some parameters
- * from the insmod command line.
- *
- * The following parameters are adjustable:
- *
- * bus0 These four arguments must be arrays of
- * bus1 3 unsigned integers as follows:
- * bus2
- * bus3 <id>,<pin>,<od>
- *
- * where:
- *
- * <id> ID to used as device_id for the corresponding bus (required)
- * <sda> GPIO pin ID of data pin (required)
- * <od> Pin is configured as open drain.
- *
- * See include/w1-gpio.h for more information about the parameters.
- *
- * If this driver is built into the kernel, you can use the following kernel
- * command line parameters, with the same values as the corresponding module
- * parameters listed above:
- *
- * w1-gpio-custom.bus0
- * w1-gpio-custom.bus1
- * w1-gpio-custom.bus2
- * w1-gpio-custom.bus3
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <linux/w1-gpio.h>
-
-#define DRV_NAME "w1-gpio-custom"
-#define DRV_DESC "Custom GPIO-based W1 driver"
-#define DRV_VERSION "0.1.2"
-
-#define PFX DRV_NAME ": "
-
-#define BUS_PARAM_ID 0
-#define BUS_PARAM_PIN 1
-#define BUS_PARAM_OD 2
-
-#define BUS_PARAM_REQUIRED 3
-#define BUS_PARAM_COUNT 3
-#define BUS_COUNT_MAX 4
-
-static unsigned int bus0[BUS_PARAM_COUNT] __initdata;
-static unsigned int bus1[BUS_PARAM_COUNT] __initdata;
-static unsigned int bus2[BUS_PARAM_COUNT] __initdata;
-static unsigned int bus3[BUS_PARAM_COUNT] __initdata;
-
-static unsigned int bus_nump[BUS_COUNT_MAX] __initdata;
-
-#define BUS_PARM_DESC " config -> id,pin,od"
-
-module_param_array(bus0, uint, &bus_nump[0], 0);
-MODULE_PARM_DESC(bus0, "bus0" BUS_PARM_DESC);
-module_param_array(bus1, uint, &bus_nump[1], 0);
-MODULE_PARM_DESC(bus1, "bus1" BUS_PARM_DESC);
-module_param_array(bus2, uint, &bus_nump[2], 0);
-MODULE_PARM_DESC(bus2, "bus2" BUS_PARM_DESC);
-module_param_array(bus3, uint, &bus_nump[3], 0);
-MODULE_PARM_DESC(bus3, "bus3" BUS_PARM_DESC);
-
-static struct platform_device *devices[BUS_COUNT_MAX];
-static unsigned int nr_devices;
-
-static void w1_gpio_custom_cleanup(void)
-{
- int i;
-
- for (i = 0; i < nr_devices; i++)
- if (devices[i])
- platform_device_unregister(devices[i]);
-}
-
-static int __init w1_gpio_custom_add_one(unsigned int id, unsigned int *params)
-{
- struct platform_device *pdev;
- struct w1_gpio_platform_data pdata;
- int err;
-
- if (!bus_nump[id])
- return 0;
-
- if (bus_nump[id] < BUS_PARAM_REQUIRED) {
- printk(KERN_ERR PFX "not enough parameters for bus%d\n", id);
- err = -EINVAL;
- goto err;
- }
-
- pdev = platform_device_alloc("w1-gpio", params[BUS_PARAM_ID]);
- if (!pdev) {
- err = -ENOMEM;
- goto err;
- }
-
- pdata.pin = params[BUS_PARAM_PIN];
- pdata.is_open_drain = params[BUS_PARAM_OD] ? 1 : 0;
- pdata.enable_external_pullup = NULL;
- pdata.ext_pullup_enable_pin = -EINVAL;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto err_put;
-
- err = platform_device_add(pdev);
- if (err)
- goto err_put;
-
- devices[nr_devices++] = pdev;
- return 0;
-
- err_put:
- platform_device_put(pdev);
- err:
- return err;
-}
-
-static int __init w1_gpio_custom_probe(void)
-{
- int err;
-
- nr_devices = 0;
- printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
-
- err = w1_gpio_custom_add_one(0, bus0);
- if (err)
- goto err;
-
- err = w1_gpio_custom_add_one(1, bus1);
- if (err)
- goto err;
-
- err = w1_gpio_custom_add_one(2, bus2);
- if (err)
- goto err;
-
- err = w1_gpio_custom_add_one(3, bus3);
- if (err)
- goto err;
-
- if (!nr_devices) {
- printk(KERN_ERR PFX "no bus parameter(s) specified\n");
- err = -ENODEV;
- goto err;
- }
-
- return 0;
-
-err:
- w1_gpio_custom_cleanup();
- return err;
-}
-
-#ifdef MODULE
-static int __init w1_gpio_custom_init(void)
-{
- return w1_gpio_custom_probe();
-}
-module_init(w1_gpio_custom_init);
-
-static void __exit w1_gpio_custom_exit(void)
-{
- w1_gpio_custom_cleanup();
-}
-module_exit(w1_gpio_custom_exit);
-#else
-subsys_initcall(w1_gpio_custom_probe);
-#endif /* MODULE*/
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Bifferos <bifferos at yahoo.co.uk >");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
projects / openwrt / staging / hauke.git / commitdiff