/*
* Ralink machine types
*
+ * Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com>
* Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
RAMIPS_MACH_GENERIC,
/* RT2880 based machines */
RAMIPS_MACH_RT_N15, /* Asus RT-N15 */
+ RAMIPS_MACH_WZR_AGL300NH, /* Buffalo WZR-AGL300NH */
/* RT3050 based machines */
RAMIPS_MACH_DIR_300_REVB, /* D-Link DIR-300 rev B */
/*
* Ralink SoC specific prom routines
*
+ * Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com>
* Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
{
.name = "RT-N15",
.mach_type = RAMIPS_MACH_RT_N15,
+ }, {
+ .name = "WZR-AGL300NH",
+ .mach_type = RAMIPS_MACH_WZR_AGL300NH,
}, {
.name = "DIR-300-revB",
.mach_type = RAMIPS_MACH_DIR_300_REVB,
default y
select RALINK_DEV_GPIO_LEDS
+config RT288X_MACH_WZR_AGL300NH
+ bool "Buffalo WZR-AGL300NH board support"
+ default y
+ select RALINK_DEV_GPIO_LEDS
+
endmenu
endif
#
# Makefile for the Ralink RT288x SoC specific parts of the kernel
#
+# Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com>
# Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
# Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
#
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_RT288X_MACH_RT_N15) += mach-rt-n15.o
+
+obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH) += mach-wzr-agl300nh.o
--- /dev/null
+/*
+ * Buffalo WZR-AGL300NH board support
+ *
+ * Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/leds.h>
+
+#include <asm/mips_machine.h>
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev_gpio_leds.h>
+#include <asm/mach-ralink/rt288x.h>
+#include <asm/mach-ralink/rt288x_regs.h>
+
+#include "devices.h"
+
+#if 0
+#define WZR_AGL300NH_GPIO_LED_POWER XX
+#define WZR_AGL300NH_GPIO_BUTTON_AOSS XX
+#define WZR_AGL300NH_GPIO_BUTTON_RESET XX
+#endif // 0
+
+#ifdef CONFIG_MTD_PARTITIONS
+
+/*
+From stock firmware:
+mtd0: 00030000 00010000 "uboot"
+mtd1: 00010000 00010000 "uboot_environ"
+mtd2: 00010000 00010000 "factory_default"
+mtd3: 000b0000 00010000 "linux"
+mtd4: 002f0000 00010000 "rootfs"
+mtd5: 00010000 00010000 "user_property"
+*/
+
+static struct mtd_partition wzr_agl300nh_partitions[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = 0x030000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "uboot_environ",
+ .offset = 0x030000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "factory_default",
+ .offset = 0x040000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "linux",
+ .offset = 0x050000,
+ .size = 0x0b0000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x100000,
+ .size = 0x2f0000,
+ }, {
+ .name = "user_property",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data wzr_agl300nh_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+ .nr_parts = ARRAY_SIZE(wzr_agl300nh_partitions),
+ .parts = wzr_agl300nh_partitions,
+#endif
+};
+
+#if 0
+static struct gpio_led wzr_agl300nh_leds_gpio[] __initdata = {
+ {
+ .name = "wzr-agl300nh:green:power",
+ .gpio = WZR_AGL300NH_GPIO_LED_POWER,
+ .active_low = ??,
+ }
+};
+#endif
+
+static void __init wzr_agl300nh_init(void)
+{
+ rt288x_gpio_init(RT2880_GPIO_MODE_UART0);
+
+ rt288x_register_flash(0, &wzr_agl300nh_flash_data);
+
+/*
+ ramips_register_gpio_leds(-1, ARRAY_SIZE(wzr_agl300nh_leds_gpio),
+ wzr_agl300nh_leds_gpio);
+*/
+}
+
+MIPS_MACHINE(RAMIPS_MACH_WZR_AGL300NH, "Buffalo WZR-AGL300NH", wzr_agl300nh_init);
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K_LIB=y
CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_CPU_CAVIUM_OCTEON is not set
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
CONFIG_CPU_MIPSR2=y
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K_LIB=y
CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DEVPORT=y
# CONFIG_DM9000 is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_MACH_VR41XX is not set
# CONFIG_MII is not set
# CONFIG_MIKROTIK_RB532 is not set
+CONFIG_MIPS=y
# CONFIG_MIPS_COBALT is not set
-# CONFIG_MIPS_FPU_EMU is not set
CONFIG_MIPS_L1_CACHE_SHIFT=4
CONFIG_MIPS_MACHINE=y
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
CONFIG_MIPS_RALINK=y
+# CONFIG_MIPS_RAMIPS_NET is not set
# CONFIG_MIPS_SIM is not set
-CONFIG_MIPS=y
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_RALINK_RT288X=y
# CONFIG_RALINK_RT305X is not set
CONFIG_RT288X_MACH_RT_N15=y
+CONFIG_RT288X_MACH_WZR_AGL300NH=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
projects / openwrt / staging / lynxis.git / commitdiff