amazon: remove 2.6.3{0,2} support
authorGabor Juhos <juhosg@openwrt.org>
Sun, 22 Apr 2012 07:20:53 +0000 (07:20 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Sun, 22 Apr 2012 07:20:53 +0000 (07:20 +0000)
SVN-Revision: 31433

18 files changed:
target/linux/amazon/config-2.6.30 [deleted file]
target/linux/amazon/config-2.6.32 [deleted file]
target/linux/amazon/patches-2.6.30/000-mips-bad-intctl.patch [deleted file]
target/linux/amazon/patches-2.6.30/010-mips_clocksource_init_war.patch [deleted file]
target/linux/amazon/patches-2.6.30/017-wdt-driver.patch [deleted file]
target/linux/amazon/patches-2.6.30/100-board.patch [deleted file]
target/linux/amazon/patches-2.6.30/130-mtd_drivers.patch [deleted file]
target/linux/amazon/patches-2.6.30/140-net_drivers.patch [deleted file]
target/linux/amazon/patches-2.6.30/150-serial_driver.patch [deleted file]
target/linux/amazon/patches-2.6.30/160-cfi-swap.patch [deleted file]
target/linux/amazon/patches-2.6.32/000-mips-bad-intctl.patch [deleted file]
target/linux/amazon/patches-2.6.32/010-mips_clocksource_init_war.patch [deleted file]
target/linux/amazon/patches-2.6.32/017-wdt-driver.patch [deleted file]
target/linux/amazon/patches-2.6.32/100-board.patch [deleted file]
target/linux/amazon/patches-2.6.32/130-mtd_drivers.patch [deleted file]
target/linux/amazon/patches-2.6.32/140-net_drivers.patch [deleted file]
target/linux/amazon/patches-2.6.32/150-serial_driver.patch [deleted file]
target/linux/amazon/patches-2.6.32/160-cfi-swap.patch [deleted file]

diff --git a/target/linux/amazon/config-2.6.30 b/target/linux/amazon/config-2.6.30
deleted file mode 100644 (file)
index 398976a..0000000
+++ /dev/null
@@ -1,152 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_ADM6996_SUPPORT=y
-CONFIG_AMAZON=y
-CONFIG_AMAZON_ASC_UART=y
-CONFIG_AMAZON_MTD=y
-CONFIG_AMAZON_NET_SW=y
-CONFIG_AMAZON_PCI=y
-CONFIG_AMAZON_WDT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BINARY_PRINTF is not set
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/bin/sh"
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR2=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_STD_PC_SERIAL_PORT=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_KALLSYMS=y
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_AMAZON_BUS_WIDTH_16=y
-# CONFIG_MTD_AMAZON_BUS_WIDTH_32 is not set
-# CONFIG_MTD_AMAZON_BUS_WIDTH_8 is not set
-# CONFIG_MTD_AMAZON_FLASH_SIZE_16 is not set
-# CONFIG_MTD_AMAZON_FLASH_SIZE_2 is not set
-CONFIG_MTD_AMAZON_FLASH_SIZE_4=y
-# CONFIG_MTD_AMAZON_FLASH_SIZE_8 is not set
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
-CONFIG_MTD_REDBOOT_PARTS=y
-# CONFIG_NET_PCI is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PROBE_INITRD_HEADER is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/amazon/config-2.6.32 b/target/linux/amazon/config-2.6.32
deleted file mode 100644 (file)
index 1a2cd16..0000000
+++ /dev/null
@@ -1,154 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_ADM6996_SUPPORT=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-CONFIG_AMAZON=y
-CONFIG_AMAZON_ASC_UART=y
-CONFIG_AMAZON_MTD=y
-CONFIG_AMAZON_NET_SW=y
-CONFIG_AMAZON_PCI=y
-CONFIG_AMAZON_WDT=y
-# CONFIG_AR7 is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/bin/sh"
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2E is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR2=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_STD_PC_SERIAL_PORT=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_KALLSYMS=y
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_AMAZON_BUS_WIDTH_16=y
-# CONFIG_MTD_AMAZON_BUS_WIDTH_32 is not set
-# CONFIG_MTD_AMAZON_BUS_WIDTH_8 is not set
-# CONFIG_MTD_AMAZON_FLASH_SIZE_16 is not set
-# CONFIG_MTD_AMAZON_FLASH_SIZE_2 is not set
-CONFIG_MTD_AMAZON_FLASH_SIZE_4=y
-# CONFIG_MTD_AMAZON_FLASH_SIZE_8 is not set
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
-CONFIG_MTD_REDBOOT_PARTS=y
-# CONFIG_NET_PCI is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-CONFIG_TREE_RCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/amazon/patches-2.6.30/000-mips-bad-intctl.patch b/target/linux/amazon/patches-2.6.30/000-mips-bad-intctl.patch
deleted file mode 100644 (file)
index 5de5064..0000000
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -1542,7 +1542,16 @@ void __cpuinit per_cpu_trap_init(void)
-        */
-       if (cpu_has_mips_r2) {
-               cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
-+              if (!cp0_compare_irq)
-+                      cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
-+
-               cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
-+              if (!cp0_perfcount_irq)
-+                      cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
-+
-+              if (arch_fixup_c0_irqs)
-+                      arch_fixup_c0_irqs();
-+
-               if (cp0_perfcount_irq == cp0_compare_irq)
-                       cp0_perfcount_irq = -1;
-       } else {
---- a/arch/mips/include/asm/irq.h
-+++ b/arch/mips/include/asm/irq.h
-@@ -157,8 +157,10 @@ extern void free_irqno(unsigned int irq)
-  * IE7.  Since R2 their number has to be read from the c0_intctl register.
-  */
- #define CP0_LEGACY_COMPARE_IRQ 7
-+#define CP0_LEGACY_PERFCNT_IRQ 7
- extern int cp0_compare_irq;
- extern int cp0_perfcount_irq;
-+extern void __weak arch_fixup_c0_irqs(void);
- #endif /* _ASM_IRQ_H */
diff --git a/target/linux/amazon/patches-2.6.30/010-mips_clocksource_init_war.patch b/target/linux/amazon/patches-2.6.30/010-mips_clocksource_init_war.patch
deleted file mode 100644 (file)
index ac44c30..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -21,6 +21,22 @@
- #ifndef CONFIG_MIPS_MT_SMTC
-+/*
-+ * Compare interrupt can be routed and latched outside the core,
-+ * so a single execution hazard barrier may not be enough to give
-+ * it time to clear as seen in the Cause register.  4 time the
-+ * pipeline depth seems reasonably conservative, and empirically
-+ * works better in configurations with high CPU/bus clock ratios.
-+ */
-+
-+#define compare_change_hazard() \
-+      do { \
-+              irq_disable_hazard(); \
-+              irq_disable_hazard(); \
-+              irq_disable_hazard(); \
-+              irq_disable_hazard(); \
-+      } while (0)
-+
- static int mips_next_event(unsigned long delta,
-                            struct clock_event_device *evt)
- {
-@@ -30,6 +46,7 @@ static int mips_next_event(unsigned long
-       cnt = read_c0_count();
-       cnt += delta;
-       write_c0_compare(cnt);
-+      compare_change_hazard();
-       res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
-       return res;
- }
diff --git a/target/linux/amazon/patches-2.6.30/017-wdt-driver.patch b/target/linux/amazon/patches-2.6.30/017-wdt-driver.patch
deleted file mode 100644 (file)
index bee390b..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -105,6 +105,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_AMAZON_WDT) += amazon_wdt.o
- # PARISC Architecture
diff --git a/target/linux/amazon/patches-2.6.30/100-board.patch b/target/linux/amazon/patches-2.6.30/100-board.patch
deleted file mode 100644 (file)
index 66d5fd6..0000000
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -60,6 +60,22 @@ config BCM47XX
-       help
-        Support for BCM47XX based boards
-+config AMAZON
-+      bool "Amazon support (EXPERIMENTAL)"
-+      depends on EXPERIMENTAL
-+      select DMA_NONCOHERENT
-+      select IRQ_CPU
-+      select CEVT_R4K
-+      select CSRC_R4K
-+      select SYS_HAS_CPU_MIPS32_R1
-+      select SYS_HAS_CPU_MIPS32_R2
-+      select HAVE_STD_PC_SERIAL_PORT
-+      select SYS_SUPPORTS_BIG_ENDIAN
-+      select SYS_SUPPORTS_32BIT_KERNEL
-+      select SYS_HAS_EARLY_PRINTK
-+      select HW_HAS_PCI
-+      select SWAP_IO_SPACE
-+
- config MIPS_COBALT
-       bool "Cobalt Server"
-       select CEVT_R4K
-@@ -633,6 +649,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
- endchoice
-+source "arch/mips/amazon/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/basler/excite/Kconfig"
- source "arch/mips/jazz/Kconfig"
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -283,6 +283,13 @@ libs-$(CONFIG_MIPS_XXS1500)       += arch/mips
- load-$(CONFIG_MIPS_XXS1500)   += 0xffffffff80100000
- #
-+# Infineon AMAZON
-+#
-+core-$(CONFIG_AMAZON)         += arch/mips/amazon/
-+cflags-$(CONFIG_AMAZON)       += -I$(srctree)/arch/mips/include/asm/mach-amazon
-+load-$(CONFIG_AMAZON)         += 0xffffffff80002000
-+
-+#
- # Cobalt Server
- #
- core-$(CONFIG_MIPS_COBALT)    += arch/mips/cobalt/
diff --git a/target/linux/amazon/patches-2.6.30/130-mtd_drivers.patch b/target/linux/amazon/patches-2.6.30/130-mtd_drivers.patch
deleted file mode 100644 (file)
index aaf3a8d..0000000
+++ /dev/null
@@ -1,7 +0,0 @@
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -62,3 +62,4 @@ obj-$(CONFIG_MTD_INTEL_VR_NOR)       += intel_
- obj-$(CONFIG_MTD_BFIN_ASYNC)  += bfin-async-flash.o
- obj-$(CONFIG_MTD_RBTX4939)    += rbtx4939-flash.o
- obj-$(CONFIG_MTD_VMU)         += vmu-flash.o
-+obj-$(CONFIG_AMAZON_MTD)      += amazon.o
diff --git a/target/linux/amazon/patches-2.6.30/140-net_drivers.patch b/target/linux/amazon/patches-2.6.30/140-net_drivers.patch
deleted file mode 100644 (file)
index c7f55bb..0000000
+++ /dev/null
@@ -1,9 +0,0 @@
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -271,3 +271,6 @@ obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
- obj-$(CONFIG_SFC) += sfc/
- obj-$(CONFIG_WIMAX) += wimax/
-+
-+obj-$(CONFIG_AMAZON_NET_SW) += amazon_sw.o
-+obj-$(CONFIG_ADM6996_SUPPORT) += admmod.o
diff --git a/target/linux/amazon/patches-2.6.30/150-serial_driver.patch b/target/linux/amazon/patches-2.6.30/150-serial_driver.patch
deleted file mode 100644 (file)
index 8b7741c..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -3,6 +3,7 @@
- #
- obj-$(CONFIG_SERIAL_CORE) += serial_core.o
-+obj-$(CONFIG_AMAZON_ASC_UART) += amazon_asc.o
- obj-$(CONFIG_SERIAL_21285) += 21285.o
- # These Sparc drivers have to appear before others such as 8250
diff --git a/target/linux/amazon/patches-2.6.30/160-cfi-swap.patch b/target/linux/amazon/patches-2.6.30/160-cfi-swap.patch
deleted file mode 100644 (file)
index 4809fcc..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1090,6 +1090,9 @@ static int __xipram do_write_oneword(str
-       int retry_cnt = 0;
-       adr += chip->start;
-+#ifdef CONFIG_AMAZON
-+      adr ^= 2;
-+#endif
-       spin_lock(chip->mutex);
-       ret = get_chip(map, chip, adr, FL_WRITING);
-@@ -1372,7 +1375,11 @@ static int __xipram do_write_buffer(stru
-       z = 0;
-       while(z < words * map_bankwidth(map)) {
-               datum = map_word_load(map, buf);
-+#ifdef CONFIG_AMAZON
-+              map_write(map, datum, (adr + z) ^ 0x2);
-+#else
-               map_write(map, datum, adr + z);
-+#endif
-               z += map_bankwidth(map);
-               buf += map_bankwidth(map);
-@@ -1617,6 +1624,9 @@ static int __xipram do_erase_oneblock(st
-       int ret = 0;
-       adr += chip->start;
-+#ifdef CONFIG_AMAZON
-+      adr ^= 2;
-+#endif
-       spin_lock(chip->mutex);
-       ret = get_chip(map, chip, adr, FL_ERASING);
-@@ -1745,6 +1755,10 @@ static int do_atmel_lock(struct map_info
-       struct cfi_private *cfi = map->fldrv_priv;
-       int ret;
-+#ifdef CONFIG_AMAZON
-+      adr ^= 2;
-+#endif
-+
-       spin_lock(chip->mutex);
-       ret = get_chip(map, chip, adr + chip->start, FL_LOCKING);
-       if (ret)
-@@ -1781,6 +1795,10 @@ static int do_atmel_unlock(struct map_in
-       struct cfi_private *cfi = map->fldrv_priv;
-       int ret;
-+#ifdef CONFIG_AMAZON
-+      adr ^= 2;
-+#endif
-+
-       spin_lock(chip->mutex);
-       ret = get_chip(map, chip, adr + chip->start, FL_UNLOCKING);
-       if (ret)
diff --git a/target/linux/amazon/patches-2.6.32/000-mips-bad-intctl.patch b/target/linux/amazon/patches-2.6.32/000-mips-bad-intctl.patch
deleted file mode 100644 (file)
index ad3fe9f..0000000
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -1537,7 +1537,16 @@ void __cpuinit per_cpu_trap_init(void)
-        */
-       if (cpu_has_mips_r2) {
-               cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
-+              if (!cp0_compare_irq)
-+                      cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
-+
-               cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
-+              if (!cp0_perfcount_irq)
-+                      cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
-+
-+              if (arch_fixup_c0_irqs)
-+                      arch_fixup_c0_irqs();
-+
-               if (cp0_perfcount_irq == cp0_compare_irq)
-                       cp0_perfcount_irq = -1;
-       } else {
---- a/arch/mips/include/asm/irq.h
-+++ b/arch/mips/include/asm/irq.h
-@@ -158,8 +158,10 @@ extern void free_irqno(unsigned int irq)
-  * IE7.  Since R2 their number has to be read from the c0_intctl register.
-  */
- #define CP0_LEGACY_COMPARE_IRQ 7
-+#define CP0_LEGACY_PERFCNT_IRQ 7
- extern int cp0_compare_irq;
- extern int cp0_perfcount_irq;
-+extern void __weak arch_fixup_c0_irqs(void);
- #endif /* _ASM_IRQ_H */
diff --git a/target/linux/amazon/patches-2.6.32/010-mips_clocksource_init_war.patch b/target/linux/amazon/patches-2.6.32/010-mips_clocksource_init_war.patch
deleted file mode 100644 (file)
index 81eabc6..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -22,6 +22,22 @@
- #ifndef CONFIG_MIPS_MT_SMTC
-+/*
-+ * Compare interrupt can be routed and latched outside the core,
-+ * so a single execution hazard barrier may not be enough to give
-+ * it time to clear as seen in the Cause register.  4 time the
-+ * pipeline depth seems reasonably conservative, and empirically
-+ * works better in configurations with high CPU/bus clock ratios.
-+ */
-+
-+#define compare_change_hazard() \
-+      do { \
-+              irq_disable_hazard(); \
-+              irq_disable_hazard(); \
-+              irq_disable_hazard(); \
-+              irq_disable_hazard(); \
-+      } while (0)
-+
- static int mips_next_event(unsigned long delta,
-                            struct clock_event_device *evt)
- {
-@@ -31,6 +47,7 @@ static int mips_next_event(unsigned long
-       cnt = read_c0_count();
-       cnt += delta;
-       write_c0_compare(cnt);
-+      compare_change_hazard();
-       res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
-       return res;
- }
diff --git a/target/linux/amazon/patches-2.6.32/017-wdt-driver.patch b/target/linux/amazon/patches-2.6.32/017-wdt-driver.patch
deleted file mode 100644 (file)
index 433abd5..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -113,6 +113,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_AMAZON_WDT) += amazon_wdt.o
- # PARISC Architecture
diff --git a/target/linux/amazon/patches-2.6.32/100-board.patch b/target/linux/amazon/patches-2.6.32/100-board.patch
deleted file mode 100644 (file)
index b109b13..0000000
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -96,6 +96,22 @@ config BCM63XX
-       help
-        Support for BCM63XX based boards
-+config AMAZON
-+      bool "Amazon support (EXPERIMENTAL)"
-+      depends on EXPERIMENTAL
-+      select DMA_NONCOHERENT
-+      select IRQ_CPU
-+      select CEVT_R4K
-+      select CSRC_R4K
-+      select SYS_HAS_CPU_MIPS32_R1
-+      select SYS_HAS_CPU_MIPS32_R2
-+      select HAVE_STD_PC_SERIAL_PORT
-+      select SYS_SUPPORTS_BIG_ENDIAN
-+      select SYS_SUPPORTS_32BIT_KERNEL
-+      select SYS_HAS_EARLY_PRINTK
-+      select HW_HAS_PCI
-+      select SWAP_IO_SPACE
-+
- config MIPS_COBALT
-       bool "Cobalt Server"
-       select CEVT_R4K
-@@ -673,6 +689,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
- endchoice
-+source "arch/mips/amazon/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/basler/excite/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -298,6 +298,13 @@ cflags-$(CONFIG_SOC_AU1X00)       += -I$(srctr
- #
-+# Infineon AMAZON
-+#
-+core-$(CONFIG_AMAZON)         += arch/mips/amazon/
-+cflags-$(CONFIG_AMAZON)       += -I$(srctree)/arch/mips/include/asm/mach-amazon
-+load-$(CONFIG_AMAZON)         += 0xffffffff80002000
-+
-+#
- # Cobalt Server
- #
- core-$(CONFIG_MIPS_COBALT)    += arch/mips/cobalt/
diff --git a/target/linux/amazon/patches-2.6.32/130-mtd_drivers.patch b/target/linux/amazon/patches-2.6.32/130-mtd_drivers.patch
deleted file mode 100644 (file)
index fafd996..0000000
+++ /dev/null
@@ -1,7 +0,0 @@
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -61,3 +61,4 @@ obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-asy
- obj-$(CONFIG_MTD_RBTX4939)    += rbtx4939-flash.o
- obj-$(CONFIG_MTD_VMU)         += vmu-flash.o
- obj-$(CONFIG_MTD_GPIO_ADDR)   += gpio-addr-flash.o
-+obj-$(CONFIG_AMAZON_MTD)      += amazon.o
diff --git a/target/linux/amazon/patches-2.6.32/140-net_drivers.patch b/target/linux/amazon/patches-2.6.32/140-net_drivers.patch
deleted file mode 100644 (file)
index 322420b..0000000
+++ /dev/null
@@ -1,9 +0,0 @@
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -285,3 +285,6 @@ obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
- obj-$(CONFIG_SFC) += sfc/
- obj-$(CONFIG_WIMAX) += wimax/
-+
-+obj-$(CONFIG_AMAZON_NET_SW) += amazon_sw.o
-+obj-$(CONFIG_ADM6996_SUPPORT) += admmod.o
diff --git a/target/linux/amazon/patches-2.6.32/150-serial_driver.patch b/target/linux/amazon/patches-2.6.32/150-serial_driver.patch
deleted file mode 100644 (file)
index 8b7741c..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -3,6 +3,7 @@
- #
- obj-$(CONFIG_SERIAL_CORE) += serial_core.o
-+obj-$(CONFIG_AMAZON_ASC_UART) += amazon_asc.o
- obj-$(CONFIG_SERIAL_21285) += 21285.o
- # These Sparc drivers have to appear before others such as 8250
diff --git a/target/linux/amazon/patches-2.6.32/160-cfi-swap.patch b/target/linux/amazon/patches-2.6.32/160-cfi-swap.patch
deleted file mode 100644 (file)
index 48b84f4..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1107,6 +1107,9 @@ static int __xipram do_write_oneword(str
-       int retry_cnt = 0;
-       adr += chip->start;
-+#ifdef CONFIG_AMAZON
-+      adr ^= 2;
-+#endif
-       spin_lock(chip->mutex);
-       ret = get_chip(map, chip, adr, FL_WRITING);
-@@ -1389,7 +1392,11 @@ static int __xipram do_write_buffer(stru
-       z = 0;
-       while(z < words * map_bankwidth(map)) {
-               datum = map_word_load(map, buf);
-+#ifdef CONFIG_AMAZON
-+              map_write(map, datum, (adr + z) ^ 0x2);
-+#else
-               map_write(map, datum, adr + z);
-+#endif
-               z += map_bankwidth(map);
-               buf += map_bankwidth(map);
-@@ -1634,6 +1641,9 @@ static int __xipram do_erase_oneblock(st
-       int ret = 0;
-       adr += chip->start;
-+#ifdef CONFIG_AMAZON
-+      adr ^= 2;
-+#endif
-       spin_lock(chip->mutex);
-       ret = get_chip(map, chip, adr, FL_ERASING);
-@@ -1762,6 +1772,10 @@ static int do_atmel_lock(struct map_info
-       struct cfi_private *cfi = map->fldrv_priv;
-       int ret;
-+#ifdef CONFIG_AMAZON
-+      adr ^= 2;
-+#endif
-+
-       spin_lock(chip->mutex);
-       ret = get_chip(map, chip, adr + chip->start, FL_LOCKING);
-       if (ret)
-@@ -1798,6 +1812,10 @@ static int do_atmel_unlock(struct map_in
-       struct cfi_private *cfi = map->fldrv_priv;
-       int ret;
-+#ifdef CONFIG_AMAZON
-+      adr ^= 2;
-+#endif
-+
-       spin_lock(chip->mutex);
-       ret = get_chip(map, chip, adr + chip->start, FL_UNLOCKING);
-       if (ret)