--- /dev/null
+#ifndef FDT_H
+#define FDT_H
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ * Copyright 2012 Kim Phillips, Freescale Semiconductor.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __ASSEMBLY__
+
+struct fdt_header {
+ fdt32_t magic; /* magic word FDT_MAGIC */
+ fdt32_t totalsize; /* total size of DT block */
+ fdt32_t off_dt_struct; /* offset to structure */
+ fdt32_t off_dt_strings; /* offset to strings */
+ fdt32_t off_mem_rsvmap; /* offset to memory reserve map */
+ fdt32_t version; /* format version */
+ fdt32_t last_comp_version; /* last compatible version */
+
+ /* version 2 fields below */
+ fdt32_t boot_cpuid_phys; /* Which physical CPU id we're
+ booting on */
+ /* version 3 fields below */
+ fdt32_t size_dt_strings; /* size of the strings block */
+
+ /* version 17 fields below */
+ fdt32_t size_dt_struct; /* size of the structure block */
+};
+
+struct fdt_reserve_entry {
+ fdt64_t address;
+ fdt64_t size;
+};
+
+struct fdt_node_header {
+ fdt32_t tag;
+ char name[0];
+};
+
+struct fdt_property {
+ fdt32_t tag;
+ fdt32_t len;
+ fdt32_t nameoff;
+ char data[0];
+};
+
+#endif /* !__ASSEMBLY */
+
+#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */
+#define FDT_TAGSIZE sizeof(fdt32_t)
+
+#define FDT_BEGIN_NODE 0x1 /* Start node: full name */
+#define FDT_END_NODE 0x2 /* End node */
+#define FDT_PROP 0x3 /* Property: name off,
+ size, content */
+#define FDT_NOP 0x4 /* nop */
+#define FDT_END 0x9
+
+#define FDT_V1_SIZE (7*sizeof(fdt32_t))
+#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(fdt32_t))
+#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(fdt32_t))
+#define FDT_V16_SIZE FDT_V3_SIZE
+#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(fdt32_t))
+
+#endif /* FDT_H */
--- /dev/null
+#ifndef LIBFDT_H
+#define LIBFDT_H
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <libfdt_env.h>
+#include <fdt.h>
+
+#define FDT_FIRST_SUPPORTED_VERSION 0x02
+#define FDT_LAST_SUPPORTED_VERSION 0x11
+
+/* Error codes: informative error codes */
+#define FDT_ERR_NOTFOUND 1
+ /* FDT_ERR_NOTFOUND: The requested node or property does not exist */
+#define FDT_ERR_EXISTS 2
+ /* FDT_ERR_EXISTS: Attempted to create a node or property which
+ * already exists */
+#define FDT_ERR_NOSPACE 3
+ /* FDT_ERR_NOSPACE: Operation needed to expand the device
+ * tree, but its buffer did not have sufficient space to
+ * contain the expanded tree. Use fdt_open_into() to move the
+ * device tree to a buffer with more space. */
+
+/* Error codes: codes for bad parameters */
+#define FDT_ERR_BADOFFSET 4
+ /* FDT_ERR_BADOFFSET: Function was passed a structure block
+ * offset which is out-of-bounds, or which points to an
+ * unsuitable part of the structure for the operation. */
+#define FDT_ERR_BADPATH 5
+ /* FDT_ERR_BADPATH: Function was passed a badly formatted path
+ * (e.g. missing a leading / for a function which requires an
+ * absolute path) */
+#define FDT_ERR_BADPHANDLE 6
+ /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle.
+ * This can be caused either by an invalid phandle property
+ * length, or the phandle value was either 0 or -1, which are
+ * not permitted. */
+#define FDT_ERR_BADSTATE 7
+ /* FDT_ERR_BADSTATE: Function was passed an incomplete device
+ * tree created by the sequential-write functions, which is
+ * not sufficiently complete for the requested operation. */
+
+/* Error codes: codes for bad device tree blobs */
+#define FDT_ERR_TRUNCATED 8
+ /* FDT_ERR_TRUNCATED: FDT or a sub-block is improperly
+ * terminated (overflows, goes outside allowed bounds, or
+ * isn't properly terminated). */
+#define FDT_ERR_BADMAGIC 9
+ /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a
+ * device tree at all - it is missing the flattened device
+ * tree magic number. */
+#define FDT_ERR_BADVERSION 10
+ /* FDT_ERR_BADVERSION: Given device tree has a version which
+ * can't be handled by the requested operation. For
+ * read-write functions, this may mean that fdt_open_into() is
+ * required to convert the tree to the expected version. */
+#define FDT_ERR_BADSTRUCTURE 11
+ /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt
+ * structure block or other serious error (e.g. misnested
+ * nodes, or subnodes preceding properties). */
+#define FDT_ERR_BADLAYOUT 12
+ /* FDT_ERR_BADLAYOUT: For read-write functions, the given
+ * device tree has it's sub-blocks in an order that the
+ * function can't handle (memory reserve map, then structure,
+ * then strings). Use fdt_open_into() to reorganize the tree
+ * into a form suitable for the read-write operations. */
+
+/* "Can't happen" error indicating a bug in libfdt */
+#define FDT_ERR_INTERNAL 13
+ /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion.
+ * Should never be returned, if it is, it indicates a bug in
+ * libfdt itself. */
+
+/* Errors in device tree content */
+#define FDT_ERR_BADNCELLS 14
+ /* FDT_ERR_BADNCELLS: Device tree has a #address-cells, #size-cells
+ * or similar property with a bad format or value */
+
+#define FDT_ERR_BADVALUE 15
+ /* FDT_ERR_BADVALUE: Device tree has a property with an unexpected
+ * value. For example: a property expected to contain a string list
+ * is not NUL-terminated within the length of its value. */
+
+#define FDT_ERR_BADOVERLAY 16
+ /* FDT_ERR_BADOVERLAY: The device tree overlay, while
+ * correctly structured, cannot be applied due to some
+ * unexpected or missing value, property or node. */
+
+#define FDT_ERR_NOPHANDLES 17
+ /* FDT_ERR_NOPHANDLES: The device tree doesn't have any
+ * phandle available anymore without causing an overflow */
+
+#define FDT_ERR_MAX 17
+
+/**********************************************************************/
+/* Low-level functions (you probably don't need these) */
+/**********************************************************************/
+
+#ifndef SWIG /* This function is not useful in Python */
+const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int checklen);
+#endif
+static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen)
+{
+ return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen);
+}
+
+uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset);
+
+/*
+ * Alignment helpers:
+ * These helpers access words from a device tree blob. They're
+ * built to work even with unaligned pointers on platforms (ike
+ * ARM) that don't like unaligned loads and stores
+ */
+
+static inline uint32_t fdt32_ld(const fdt32_t *p)
+{
+ fdt32_t v;
+
+ memcpy(&v, p, sizeof(v));
+ return fdt32_to_cpu(v);
+}
+
+static inline uint64_t fdt64_ld(const fdt64_t *p)
+{
+ fdt64_t v;
+
+ memcpy(&v, p, sizeof(v));
+ return fdt64_to_cpu(v);
+}
+
+/**********************************************************************/
+/* Traversal functions */
+/**********************************************************************/
+
+int fdt_next_node(const void *fdt, int offset, int *depth);
+
+/**
+ * fdt_first_subnode() - get offset of first direct subnode
+ *
+ * @fdt: FDT blob
+ * @offset: Offset of node to check
+ * @return offset of first subnode, or -FDT_ERR_NOTFOUND if there is none
+ */
+int fdt_first_subnode(const void *fdt, int offset);
+
+/**
+ * fdt_next_subnode() - get offset of next direct subnode
+ *
+ * After first calling fdt_first_subnode(), call this function repeatedly to
+ * get direct subnodes of a parent node.
+ *
+ * @fdt: FDT blob
+ * @offset: Offset of previous subnode
+ * @return offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more
+ * subnodes
+ */
+int fdt_next_subnode(const void *fdt, int offset);
+
+/**
+ * fdt_for_each_subnode - iterate over all subnodes of a parent
+ *
+ * @node: child node (int, lvalue)
+ * @fdt: FDT blob (const void *)
+ * @parent: parent node (int)
+ *
+ * This is actually a wrapper around a for loop and would be used like so:
+ *
+ * fdt_for_each_subnode(node, fdt, parent) {
+ * Use node
+ * ...
+ * }
+ *
+ * if ((node < 0) && (node != -FDT_ERR_NOT_FOUND)) {
+ * Error handling
+ * }
+ *
+ * Note that this is implemented as a macro and @node is used as
+ * iterator in the loop. The parent variable be constant or even a
+ * literal.
+ *
+ */
+#define fdt_for_each_subnode(node, fdt, parent) \
+ for (node = fdt_first_subnode(fdt, parent); \
+ node >= 0; \
+ node = fdt_next_subnode(fdt, node))
+
+/**********************************************************************/
+/* General functions */
+/**********************************************************************/
+#define fdt_get_header(fdt, field) \
+ (fdt32_ld(&((const struct fdt_header *)(fdt))->field))
+#define fdt_magic(fdt) (fdt_get_header(fdt, magic))
+#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize))
+#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct))
+#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings))
+#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap))
+#define fdt_version(fdt) (fdt_get_header(fdt, version))
+#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version))
+#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys))
+#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings))
+#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct))
+
+#define fdt_set_hdr_(name) \
+ static inline void fdt_set_##name(void *fdt, uint32_t val) \
+ { \
+ struct fdt_header *fdth = (struct fdt_header *)fdt; \
+ fdth->name = cpu_to_fdt32(val); \
+ }
+fdt_set_hdr_(magic);
+fdt_set_hdr_(totalsize);
+fdt_set_hdr_(off_dt_struct);
+fdt_set_hdr_(off_dt_strings);
+fdt_set_hdr_(off_mem_rsvmap);
+fdt_set_hdr_(version);
+fdt_set_hdr_(last_comp_version);
+fdt_set_hdr_(boot_cpuid_phys);
+fdt_set_hdr_(size_dt_strings);
+fdt_set_hdr_(size_dt_struct);
+#undef fdt_set_hdr_
+
+/**
+ * fdt_header_size - return the size of the tree's header
+ * @fdt: pointer to a flattened device tree
+ */
+size_t fdt_header_size_(uint32_t version);
+static inline size_t fdt_header_size(const void *fdt)
+{
+ return fdt_header_size_(fdt_version(fdt));
+}
+
+/**
+ * fdt_check_header - sanity check a device tree header
+
+ * @fdt: pointer to data which might be a flattened device tree
+ *
+ * fdt_check_header() checks that the given buffer contains what
+ * appears to be a flattened device tree, and that the header contains
+ * valid information (to the extent that can be determined from the
+ * header alone).
+ *
+ * returns:
+ * 0, if the buffer appears to contain a valid device tree
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_TRUNCATED, standard meanings, as above
+ */
+int fdt_check_header(const void *fdt);
+
+/**
+ * fdt_move - move a device tree around in memory
+ * @fdt: pointer to the device tree to move
+ * @buf: pointer to memory where the device is to be moved
+ * @bufsize: size of the memory space at buf
+ *
+ * fdt_move() relocates, if possible, the device tree blob located at
+ * fdt to the buffer at buf of size bufsize. The buffer may overlap
+ * with the existing device tree blob at fdt. Therefore,
+ * fdt_move(fdt, fdt, fdt_totalsize(fdt))
+ * should always succeed.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_move(const void *fdt, void *buf, int bufsize);
+
+/**********************************************************************/
+/* Read-only functions */
+/**********************************************************************/
+
+int fdt_check_full(const void *fdt, size_t bufsize);
+
+/**
+ * fdt_get_string - retrieve a string from the strings block of a device tree
+ * @fdt: pointer to the device tree blob
+ * @stroffset: offset of the string within the strings block (native endian)
+ * @lenp: optional pointer to return the string's length
+ *
+ * fdt_get_string() retrieves a pointer to a single string from the
+ * strings block of the device tree blob at fdt, and optionally also
+ * returns the string's length in *lenp.
+ *
+ * returns:
+ * a pointer to the string, on success
+ * NULL, if stroffset is out of bounds, or doesn't point to a valid string
+ */
+const char *fdt_get_string(const void *fdt, int stroffset, int *lenp);
+
+/**
+ * fdt_string - retrieve a string from the strings block of a device tree
+ * @fdt: pointer to the device tree blob
+ * @stroffset: offset of the string within the strings block (native endian)
+ *
+ * fdt_string() retrieves a pointer to a single string from the
+ * strings block of the device tree blob at fdt.
+ *
+ * returns:
+ * a pointer to the string, on success
+ * NULL, if stroffset is out of bounds, or doesn't point to a valid string
+ */
+const char *fdt_string(const void *fdt, int stroffset);
+
+/**
+ * fdt_get_max_phandle - retrieves the highest phandle in a tree
+ * @fdt: pointer to the device tree blob
+ *
+ * fdt_get_max_phandle retrieves the highest phandle in the given
+ * device tree. This will ignore badly formatted phandles, or phandles
+ * with a value of 0 or -1.
+ *
+ * returns:
+ * the highest phandle on success
+ * 0, if no phandle was found in the device tree
+ * -1, if an error occurred
+ */
+uint32_t fdt_get_max_phandle(const void *fdt);
+
+/**
+ * fdt_num_mem_rsv - retrieve the number of memory reserve map entries
+ * @fdt: pointer to the device tree blob
+ *
+ * Returns the number of entries in the device tree blob's memory
+ * reservation map. This does not include the terminating 0,0 entry
+ * or any other (0,0) entries reserved for expansion.
+ *
+ * returns:
+ * the number of entries
+ */
+int fdt_num_mem_rsv(const void *fdt);
+
+/**
+ * fdt_get_mem_rsv - retrieve one memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @address, @size: pointers to 64-bit variables
+ *
+ * On success, *address and *size will contain the address and size of
+ * the n-th reserve map entry from the device tree blob, in
+ * native-endian format.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size);
+
+/**
+ * fdt_subnode_offset_namelen - find a subnode based on substring
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_subnode_offset(), but only examine the first
+ * namelen characters of name for matching the subnode name. This is
+ * useful for finding subnodes based on a portion of a larger string,
+ * such as a full path.
+ */
+#ifndef SWIG /* Not available in Python */
+int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
+ const char *name, int namelen);
+#endif
+/**
+ * fdt_subnode_offset - find a subnode of a given node
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ *
+ * fdt_subnode_offset() finds a subnode of the node at structure block
+ * offset parentoffset with the given name. name may include a unit
+ * address, in which case fdt_subnode_offset() will find the subnode
+ * with that unit address, or the unit address may be omitted, in
+ * which case fdt_subnode_offset() will find an arbitrary subnode
+ * whose name excluding unit address matches the given name.
+ *
+ * returns:
+ * structure block offset of the requested subnode (>=0), on success
+ * -FDT_ERR_NOTFOUND, if the requested subnode does not exist
+ * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE
+ * tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name);
+
+/**
+ * fdt_path_offset_namelen - find a tree node by its full path
+ * @fdt: pointer to the device tree blob
+ * @path: full path of the node to locate
+ * @namelen: number of characters of path to consider
+ *
+ * Identical to fdt_path_offset(), but only consider the first namelen
+ * characters of path as the path name.
+ */
+#ifndef SWIG /* Not available in Python */
+int fdt_path_offset_namelen(const void *fdt, const char *path, int namelen);
+#endif
+
+/**
+ * fdt_path_offset - find a tree node by its full path
+ * @fdt: pointer to the device tree blob
+ * @path: full path of the node to locate
+ *
+ * fdt_path_offset() finds a node of a given path in the device tree.
+ * Each path component may omit the unit address portion, but the
+ * results of this are undefined if any such path component is
+ * ambiguous (that is if there are multiple nodes at the relevant
+ * level matching the given component, differentiated only by unit
+ * address).
+ *
+ * returns:
+ * structure block offset of the node with the requested path (>=0), on
+ * success
+ * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid
+ * -FDT_ERR_NOTFOUND, if the requested node does not exist
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_path_offset(const void *fdt, const char *path);
+
+/**
+ * fdt_get_name - retrieve the name of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of the starting node
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_get_name() retrieves the name (including unit address) of the
+ * device tree node at structure block offset nodeoffset. If lenp is
+ * non-NULL, the length of this name is also returned, in the integer
+ * pointed to by lenp.
+ *
+ * returns:
+ * pointer to the node's name, on success
+ * If lenp is non-NULL, *lenp contains the length of that name
+ * (>=0)
+ * NULL, on error
+ * if lenp is non-NULL *lenp contains an error code (<0):
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE
+ * tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE, standard meanings
+ */
+const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp);
+
+/**
+ * fdt_first_property_offset - find the offset of a node's first property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of a node
+ *
+ * fdt_first_property_offset() finds the first property of the node at
+ * the given structure block offset.
+ *
+ * returns:
+ * structure block offset of the property (>=0), on success
+ * -FDT_ERR_NOTFOUND, if the requested node has no properties
+ * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_first_property_offset(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_next_property_offset - step through a node's properties
+ * @fdt: pointer to the device tree blob
+ * @offset: structure block offset of a property
+ *
+ * fdt_next_property_offset() finds the property immediately after the
+ * one at the given structure block offset. This will be a property
+ * of the same node as the given property.
+ *
+ * returns:
+ * structure block offset of the next property (>=0), on success
+ * -FDT_ERR_NOTFOUND, if the given property is the last in its node
+ * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_PROP tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_next_property_offset(const void *fdt, int offset);
+
+/**
+ * fdt_for_each_property_offset - iterate over all properties of a node
+ *
+ * @property_offset: property offset (int, lvalue)
+ * @fdt: FDT blob (const void *)
+ * @node: node offset (int)
+ *
+ * This is actually a wrapper around a for loop and would be used like so:
+ *
+ * fdt_for_each_property_offset(property, fdt, node) {
+ * Use property
+ * ...
+ * }
+ *
+ * if ((property < 0) && (property != -FDT_ERR_NOT_FOUND)) {
+ * Error handling
+ * }
+ *
+ * Note that this is implemented as a macro and property is used as
+ * iterator in the loop. The node variable can be constant or even a
+ * literal.
+ */
+#define fdt_for_each_property_offset(property, fdt, node) \
+ for (property = fdt_first_property_offset(fdt, node); \
+ property >= 0; \
+ property = fdt_next_property_offset(fdt, property))
+
+/**
+ * fdt_get_property_by_offset - retrieve the property at a given offset
+ * @fdt: pointer to the device tree blob
+ * @offset: offset of the property to retrieve
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_get_property_by_offset() retrieves a pointer to the
+ * fdt_property structure within the device tree blob at the given
+ * offset. If lenp is non-NULL, the length of the property value is
+ * also returned, in the integer pointed to by lenp.
+ *
+ * Note that this code only works on device tree versions >= 16. fdt_getprop()
+ * works on all versions.
+ *
+ * returns:
+ * pointer to the structure representing the property
+ * if lenp is non-NULL, *lenp contains the length of the property
+ * value (>=0)
+ * NULL, on error
+ * if lenp is non-NULL, *lenp contains an error code (<0):
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+const struct fdt_property *fdt_get_property_by_offset(const void *fdt,
+ int offset,
+ int *lenp);
+
+/**
+ * fdt_get_property_namelen - find a property based on substring
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to find
+ * @name: name of the property to find
+ * @namelen: number of characters of name to consider
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * Identical to fdt_get_property(), but only examine the first namelen
+ * characters of name for matching the property name.
+ */
+#ifndef SWIG /* Not available in Python */
+const struct fdt_property *fdt_get_property_namelen(const void *fdt,
+ int nodeoffset,
+ const char *name,
+ int namelen, int *lenp);
+#endif
+
+/**
+ * fdt_get_property - find a given property in a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to find
+ * @name: name of the property to find
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_get_property() retrieves a pointer to the fdt_property
+ * structure within the device tree blob corresponding to the property
+ * named 'name' of the node at offset nodeoffset. If lenp is
+ * non-NULL, the length of the property value is also returned, in the
+ * integer pointed to by lenp.
+ *
+ * returns:
+ * pointer to the structure representing the property
+ * if lenp is non-NULL, *lenp contains the length of the property
+ * value (>=0)
+ * NULL, on error
+ * if lenp is non-NULL, *lenp contains an error code (<0):
+ * -FDT_ERR_NOTFOUND, node does not have named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE
+ * tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset,
+ const char *name, int *lenp);
+static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset,
+ const char *name,
+ int *lenp)
+{
+ return (struct fdt_property *)(uintptr_t)
+ fdt_get_property(fdt, nodeoffset, name, lenp);
+}
+
+/**
+ * fdt_getprop_by_offset - retrieve the value of a property at a given offset
+ * @fdt: pointer to the device tree blob
+ * @ffset: offset of the property to read
+ * @namep: pointer to a string variable (will be overwritten) or NULL
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_getprop_by_offset() retrieves a pointer to the value of the
+ * property at structure block offset 'offset' (this will be a pointer
+ * to within the device blob itself, not a copy of the value). If
+ * lenp is non-NULL, the length of the property value is also
+ * returned, in the integer pointed to by lenp. If namep is non-NULL,
+ * the property's namne will also be returned in the char * pointed to
+ * by namep (this will be a pointer to within the device tree's string
+ * block, not a new copy of the name).
+ *
+ * returns:
+ * pointer to the property's value
+ * if lenp is non-NULL, *lenp contains the length of the property
+ * value (>=0)
+ * if namep is non-NULL *namep contiains a pointer to the property
+ * name.
+ * NULL, on error
+ * if lenp is non-NULL, *lenp contains an error code (<0):
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+#ifndef SWIG /* This function is not useful in Python */
+const void *fdt_getprop_by_offset(const void *fdt, int offset,
+ const char **namep, int *lenp);
+#endif
+
+/**
+ * fdt_getprop_namelen - get property value based on substring
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to find
+ * @name: name of the property to find
+ * @namelen: number of characters of name to consider
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * Identical to fdt_getprop(), but only examine the first namelen
+ * characters of name for matching the property name.
+ */
+#ifndef SWIG /* Not available in Python */
+const void *fdt_getprop_namelen(const void *fdt, int nodeoffset,
+ const char *name, int namelen, int *lenp);
+static inline void *fdt_getprop_namelen_w(void *fdt, int nodeoffset,
+ const char *name, int namelen,
+ int *lenp)
+{
+ return (void *)(uintptr_t)fdt_getprop_namelen(fdt, nodeoffset, name,
+ namelen, lenp);
+}
+#endif
+
+/**
+ * fdt_getprop - retrieve the value of a given property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to find
+ * @name: name of the property to find
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_getprop() retrieves a pointer to the value of the property
+ * named 'name' of the node at offset nodeoffset (this will be a
+ * pointer to within the device blob itself, not a copy of the value).
+ * If lenp is non-NULL, the length of the property value is also
+ * returned, in the integer pointed to by lenp.
+ *
+ * returns:
+ * pointer to the property's value
+ * if lenp is non-NULL, *lenp contains the length of the property
+ * value (>=0)
+ * NULL, on error
+ * if lenp is non-NULL, *lenp contains an error code (<0):
+ * -FDT_ERR_NOTFOUND, node does not have named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE
+ * tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+const void *fdt_getprop(const void *fdt, int nodeoffset,
+ const char *name, int *lenp);
+static inline void *fdt_getprop_w(void *fdt, int nodeoffset,
+ const char *name, int *lenp)
+{
+ return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp);
+}
+
+/**
+ * fdt_get_phandle - retrieve the phandle of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of the node
+ *
+ * fdt_get_phandle() retrieves the phandle of the device tree node at
+ * structure block offset nodeoffset.
+ *
+ * returns:
+ * the phandle of the node at nodeoffset, on success (!= 0, != -1)
+ * 0, if the node has no phandle, or another error occurs
+ */
+uint32_t fdt_get_phandle(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_get_alias_namelen - get alias based on substring
+ * @fdt: pointer to the device tree blob
+ * @name: name of the alias th look up
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_get_alias(), but only examine the first namelen
+ * characters of name for matching the alias name.
+ */
+#ifndef SWIG /* Not available in Python */
+const char *fdt_get_alias_namelen(const void *fdt,
+ const char *name, int namelen);
+#endif
+
+/**
+ * fdt_get_alias - retrieve the path referenced by a given alias
+ * @fdt: pointer to the device tree blob
+ * @name: name of the alias th look up
+ *
+ * fdt_get_alias() retrieves the value of a given alias. That is, the
+ * value of the property named 'name' in the node /aliases.
+ *
+ * returns:
+ * a pointer to the expansion of the alias named 'name', if it exists
+ * NULL, if the given alias or the /aliases node does not exist
+ */
+const char *fdt_get_alias(const void *fdt, const char *name);
+
+/**
+ * fdt_get_path - determine the full path of a node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose path to find
+ * @buf: character buffer to contain the returned path (will be overwritten)
+ * @buflen: size of the character buffer at buf
+ *
+ * fdt_get_path() computes the full path of the node at offset
+ * nodeoffset, and records that path in the buffer at buf.
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset.
+ *
+ * returns:
+ * 0, on success
+ * buf contains the absolute path of the node at
+ * nodeoffset, as a NUL-terminated string.
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1)
+ * characters and will not fit in the given buffer.
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen);
+
+/**
+ * fdt_supernode_atdepth_offset - find a specific ancestor of a node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose parent to find
+ * @supernodedepth: depth of the ancestor to find
+ * @nodedepth: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_supernode_atdepth_offset() finds an ancestor of the given node
+ * at a specific depth from the root (where the root itself has depth
+ * 0, its immediate subnodes depth 1 and so forth). So
+ * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL);
+ * will always return 0, the offset of the root node. If the node at
+ * nodeoffset has depth D, then:
+ * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL);
+ * will return nodeoffset itself.
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset.
+ *
+ * returns:
+ * structure block offset of the node at node offset's ancestor
+ * of depth supernodedepth (>=0), on success
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of
+ * nodeoffset
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
+ int supernodedepth, int *nodedepth);
+
+/**
+ * fdt_node_depth - find the depth of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose parent to find
+ *
+ * fdt_node_depth() finds the depth of a given node. The root node
+ * has depth 0, its immediate subnodes depth 1 and so forth.
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset.
+ *
+ * returns:
+ * depth of the node at nodeoffset (>=0), on success
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_depth(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_parent_offset - find the parent of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose parent to find
+ *
+ * fdt_parent_offset() locates the parent node of a given node (that
+ * is, it finds the offset of the node which contains the node at
+ * nodeoffset as a subnode).
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset, *twice*.
+ *
+ * returns:
+ * structure block offset of the parent of the node at nodeoffset
+ * (>=0), on success
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_parent_offset(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_node_offset_by_prop_value - find nodes with a given property value
+ * @fdt: pointer to the device tree blob
+ * @startoffset: only find nodes after this offset
+ * @propname: property name to check
+ * @propval: property value to search for
+ * @proplen: length of the value in propval
+ *
+ * fdt_node_offset_by_prop_value() returns the offset of the first
+ * node after startoffset, which has a property named propname whose
+ * value is of length proplen and has value equal to propval; or if
+ * startoffset is -1, the very first such node in the tree.
+ *
+ * To iterate through all nodes matching the criterion, the following
+ * idiom can be used:
+ * offset = fdt_node_offset_by_prop_value(fdt, -1, propname,
+ * propval, proplen);
+ * while (offset != -FDT_ERR_NOTFOUND) {
+ * // other code here
+ * offset = fdt_node_offset_by_prop_value(fdt, offset, propname,
+ * propval, proplen);
+ * }
+ *
+ * Note the -1 in the first call to the function, if 0 is used here
+ * instead, the function will never locate the root node, even if it
+ * matches the criterion.
+ *
+ * returns:
+ * structure block offset of the located node (>= 0, >startoffset),
+ * on success
+ * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the
+ * tree after startoffset
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
+ const char *propname,
+ const void *propval, int proplen);
+
+/**
+ * fdt_node_offset_by_phandle - find the node with a given phandle
+ * @fdt: pointer to the device tree blob
+ * @phandle: phandle value
+ *
+ * fdt_node_offset_by_phandle() returns the offset of the node
+ * which has the given phandle value. If there is more than one node
+ * in the tree with the given phandle (an invalid tree), results are
+ * undefined.
+ *
+ * returns:
+ * structure block offset of the located node (>= 0), on success
+ * -FDT_ERR_NOTFOUND, no node with that phandle exists
+ * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1)
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle);
+
+/**
+ * fdt_node_check_compatible: check a node's compatible property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of a tree node
+ * @compatible: string to match against
+ *
+ *
+ * fdt_node_check_compatible() returns 0 if the given node contains a
+ * 'compatible' property with the given string as one of its elements,
+ * it returns non-zero otherwise, or on error.
+ *
+ * returns:
+ * 0, if the node has a 'compatible' property listing the given string
+ * 1, if the node has a 'compatible' property, but it does not list
+ * the given string
+ * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property
+ * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_check_compatible(const void *fdt, int nodeoffset,
+ const char *compatible);
+
+/**
+ * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value
+ * @fdt: pointer to the device tree blob
+ * @startoffset: only find nodes after this offset
+ * @compatible: 'compatible' string to match against
+ *
+ * fdt_node_offset_by_compatible() returns the offset of the first
+ * node after startoffset, which has a 'compatible' property which
+ * lists the given compatible string; or if startoffset is -1, the
+ * very first such node in the tree.
+ *
+ * To iterate through all nodes matching the criterion, the following
+ * idiom can be used:
+ * offset = fdt_node_offset_by_compatible(fdt, -1, compatible);
+ * while (offset != -FDT_ERR_NOTFOUND) {
+ * // other code here
+ * offset = fdt_node_offset_by_compatible(fdt, offset, compatible);
+ * }
+ *
+ * Note the -1 in the first call to the function, if 0 is used here
+ * instead, the function will never locate the root node, even if it
+ * matches the criterion.
+ *
+ * returns:
+ * structure block offset of the located node (>= 0, >startoffset),
+ * on success
+ * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the
+ * tree after startoffset
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
+ const char *compatible);
+
+/**
+ * fdt_stringlist_contains - check a string list property for a string
+ * @strlist: Property containing a list of strings to check
+ * @listlen: Length of property
+ * @str: String to search for
+ *
+ * This is a utility function provided for convenience. The list contains
+ * one or more strings, each terminated by \0, as is found in a device tree
+ * "compatible" property.
+ *
+ * @return: 1 if the string is found in the list, 0 not found, or invalid list
+ */
+int fdt_stringlist_contains(const char *strlist, int listlen, const char *str);
+
+/**
+ * fdt_stringlist_count - count the number of strings in a string list
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of a tree node
+ * @property: name of the property containing the string list
+ * @return:
+ * the number of strings in the given property
+ * -FDT_ERR_BADVALUE if the property value is not NUL-terminated
+ * -FDT_ERR_NOTFOUND if the property does not exist
+ */
+int fdt_stringlist_count(const void *fdt, int nodeoffset, const char *property);
+
+/**
+ * fdt_stringlist_search - find a string in a string list and return its index
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of a tree node
+ * @property: name of the property containing the string list
+ * @string: string to look up in the string list
+ *
+ * Note that it is possible for this function to succeed on property values
+ * that are not NUL-terminated. That's because the function will stop after
+ * finding the first occurrence of @string. This can for example happen with
+ * small-valued cell properties, such as #address-cells, when searching for
+ * the empty string.
+ *
+ * @return:
+ * the index of the string in the list of strings
+ * -FDT_ERR_BADVALUE if the property value is not NUL-terminated
+ * -FDT_ERR_NOTFOUND if the property does not exist or does not contain
+ * the given string
+ */
+int fdt_stringlist_search(const void *fdt, int nodeoffset, const char *property,
+ const char *string);
+
+/**
+ * fdt_stringlist_get() - obtain the string at a given index in a string list
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of a tree node
+ * @property: name of the property containing the string list
+ * @index: index of the string to return
+ * @lenp: return location for the string length or an error code on failure
+ *
+ * Note that this will successfully extract strings from properties with
+ * non-NUL-terminated values. For example on small-valued cell properties
+ * this function will return the empty string.
+ *
+ * If non-NULL, the length of the string (on success) or a negative error-code
+ * (on failure) will be stored in the integer pointer to by lenp.
+ *
+ * @return:
+ * A pointer to the string at the given index in the string list or NULL on
+ * failure. On success the length of the string will be stored in the memory
+ * location pointed to by the lenp parameter, if non-NULL. On failure one of
+ * the following negative error codes will be returned in the lenp parameter
+ * (if non-NULL):
+ * -FDT_ERR_BADVALUE if the property value is not NUL-terminated
+ * -FDT_ERR_NOTFOUND if the property does not exist
+ */
+const char *fdt_stringlist_get(const void *fdt, int nodeoffset,
+ const char *property, int index,
+ int *lenp);
+
+/**********************************************************************/
+/* Read-only functions (addressing related) */
+/**********************************************************************/
+
+/**
+ * FDT_MAX_NCELLS - maximum value for #address-cells and #size-cells
+ *
+ * This is the maximum value for #address-cells, #size-cells and
+ * similar properties that will be processed by libfdt. IEE1275
+ * requires that OF implementations handle values up to 4.
+ * Implementations may support larger values, but in practice higher
+ * values aren't used.
+ */
+#define FDT_MAX_NCELLS 4
+
+/**
+ * fdt_address_cells - retrieve address size for a bus represented in the tree
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to find the address size for
+ *
+ * When the node has a valid #address-cells property, returns its value.
+ *
+ * returns:
+ * 0 <= n < FDT_MAX_NCELLS, on success
+ * 2, if the node has no #address-cells property
+ * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid
+ * #address-cells property
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_address_cells(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_size_cells - retrieve address range size for a bus represented in the
+ * tree
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to find the address range size for
+ *
+ * When the node has a valid #size-cells property, returns its value.
+ *
+ * returns:
+ * 0 <= n < FDT_MAX_NCELLS, on success
+ * 2, if the node has no #size-cells property
+ * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid
+ * #size-cells property
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_size_cells(const void *fdt, int nodeoffset);
+
+
+/**********************************************************************/
+/* Write-in-place functions */
+/**********************************************************************/
+
+/**
+ * fdt_setprop_inplace_namelen_partial - change a property's value,
+ * but not its size
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @namelen: number of characters of name to consider
+ * @idx: index of the property to change in the array
+ * @val: pointer to data to replace the property value with
+ * @len: length of the property value
+ *
+ * Identical to fdt_setprop_inplace(), but modifies the given property
+ * starting from the given index, and using only the first characters
+ * of the name. It is useful when you want to manipulate only one value of
+ * an array and you have a string that doesn't end with \0.
+ */
+#ifndef SWIG /* Not available in Python */
+int fdt_setprop_inplace_namelen_partial(void *fdt, int nodeoffset,
+ const char *name, int namelen,
+ uint32_t idx, const void *val,
+ int len);
+#endif
+
+/**
+ * fdt_setprop_inplace - change a property's value, but not its size
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: pointer to data to replace the property value with
+ * @len: length of the property value
+ *
+ * fdt_setprop_inplace() replaces the value of a given property with
+ * the data in val, of length len. This function cannot change the
+ * size of a property, and so will only work if len is equal to the
+ * current length of the property.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, if len is not equal to the property's current length
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+#ifndef SWIG /* Not available in Python */
+int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
+ const void *val, int len);
+#endif
+
+/**
+ * fdt_setprop_inplace_u32 - change the value of a 32-bit integer property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 32-bit integer value to replace the property with
+ *
+ * fdt_setprop_inplace_u32() replaces the value of a given property
+ * with the 32-bit integer value in val, converting val to big-endian
+ * if necessary. This function cannot change the size of a property,
+ * and so will only work if the property already exists and has length
+ * 4.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, if the property's length is not equal to 4
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_setprop_inplace_u32(void *fdt, int nodeoffset,
+ const char *name, uint32_t val)
+{
+ fdt32_t tmp = cpu_to_fdt32(val);
+ return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp));
+}
+
+/**
+ * fdt_setprop_inplace_u64 - change the value of a 64-bit integer property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 64-bit integer value to replace the property with
+ *
+ * fdt_setprop_inplace_u64() replaces the value of a given property
+ * with the 64-bit integer value in val, converting val to big-endian
+ * if necessary. This function cannot change the size of a property,
+ * and so will only work if the property already exists and has length
+ * 8.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, if the property's length is not equal to 8
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_setprop_inplace_u64(void *fdt, int nodeoffset,
+ const char *name, uint64_t val)
+{
+ fdt64_t tmp = cpu_to_fdt64(val);
+ return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp));
+}
+
+/**
+ * fdt_setprop_inplace_cell - change the value of a single-cell property
+ *
+ * This is an alternative name for fdt_setprop_inplace_u32()
+ */
+static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
+ const char *name, uint32_t val)
+{
+ return fdt_setprop_inplace_u32(fdt, nodeoffset, name, val);
+}
+
+/**
+ * fdt_nop_property - replace a property with nop tags
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to nop
+ * @name: name of the property to nop
+ *
+ * fdt_nop_property() will replace a given property's representation
+ * in the blob with FDT_NOP tags, effectively removing it from the
+ * tree.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the property, and will not alter or move any other part of the
+ * tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_nop_property(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_nop_node - replace a node (subtree) with nop tags
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to nop
+ *
+ * fdt_nop_node() will replace a given node's representation in the
+ * blob, including all its subnodes, if any, with FDT_NOP tags,
+ * effectively removing it from the tree.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the node and its properties and subnodes, and will not alter or
+ * move any other part of the tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_nop_node(void *fdt, int nodeoffset);
+
+/**********************************************************************/
+/* Sequential write functions */
+/**********************************************************************/
+
+int fdt_create(void *buf, int bufsize);
+int fdt_resize(void *fdt, void *buf, int bufsize);
+int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size);
+int fdt_finish_reservemap(void *fdt);
+int fdt_begin_node(void *fdt, const char *name);
+int fdt_property(void *fdt, const char *name, const void *val, int len);
+static inline int fdt_property_u32(void *fdt, const char *name, uint32_t val)
+{
+ fdt32_t tmp = cpu_to_fdt32(val);
+ return fdt_property(fdt, name, &tmp, sizeof(tmp));
+}
+static inline int fdt_property_u64(void *fdt, const char *name, uint64_t val)
+{
+ fdt64_t tmp = cpu_to_fdt64(val);
+ return fdt_property(fdt, name, &tmp, sizeof(tmp));
+}
+
+#ifndef SWIG /* Not available in Python */
+static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val)
+{
+ return fdt_property_u32(fdt, name, val);
+}
+#endif
+
+/**
+ * fdt_property_placeholder - add a new property and return a ptr to its value
+ *
+ * @fdt: pointer to the device tree blob
+ * @name: name of property to add
+ * @len: length of property value in bytes
+ * @valp: returns a pointer to where where the value should be placed
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_NOSPACE, standard meanings
+ */
+int fdt_property_placeholder(void *fdt, const char *name, int len, void **valp);
+
+#define fdt_property_string(fdt, name, str) \
+ fdt_property(fdt, name, str, strlen(str)+1)
+int fdt_end_node(void *fdt);
+int fdt_finish(void *fdt);
+
+/**********************************************************************/
+/* Read-write functions */
+/**********************************************************************/
+
+int fdt_create_empty_tree(void *buf, int bufsize);
+int fdt_open_into(const void *fdt, void *buf, int bufsize);
+int fdt_pack(void *fdt);
+
+/**
+ * fdt_add_mem_rsv - add one memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @address, @size: 64-bit values (native endian)
+ *
+ * Adds a reserve map entry to the given blob reserving a region at
+ * address address of length size.
+ *
+ * This function will insert data into the reserve map and will
+ * therefore change the indexes of some entries in the table.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new reservation entry
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size);
+
+/**
+ * fdt_del_mem_rsv - remove a memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @n: entry to remove
+ *
+ * fdt_del_mem_rsv() removes the n-th memory reserve map entry from
+ * the blob.
+ *
+ * This function will delete data from the reservation table and will
+ * therefore change the indexes of some entries in the table.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there
+ * are less than n+1 reserve map entries)
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_del_mem_rsv(void *fdt, int n);
+
+/**
+ * fdt_set_name - change the name of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of a node
+ * @name: name to give the node
+ *
+ * fdt_set_name() replaces the name (including unit address, if any)
+ * of the given node with the given string. NOTE: this function can't
+ * efficiently check if the new name is unique amongst the given
+ * node's siblings; results are undefined if this function is invoked
+ * with a name equal to one of the given node's siblings.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob
+ * to contain the new name
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_set_name(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_setprop - create or change a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: pointer to data to set the property value to
+ * @len: length of the property value
+ *
+ * fdt_setprop() sets the value of the named property in the given
+ * node to the given value and length, creating the property if it
+ * does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_setprop(void *fdt, int nodeoffset, const char *name,
+ const void *val, int len);
+
+/**
+ * fdt_setprop_placeholder - allocate space for a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @len: length of the property value
+ * @prop_data: return pointer to property data
+ *
+ * fdt_setprop_placeholer() allocates the named property in the given node.
+ * If the property exists it is resized. In either case a pointer to the
+ * property data is returned.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_setprop_placeholder(void *fdt, int nodeoffset, const char *name,
+ int len, void **prop_data);
+
+/**
+ * fdt_setprop_u32 - set a property to a 32-bit integer
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 32-bit integer value for the property (native endian)
+ *
+ * fdt_setprop_u32() sets the value of the named property in the given
+ * node to the given 32-bit integer value (converting to big-endian if
+ * necessary), or creates a new property with that value if it does
+ * not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_setprop_u32(void *fdt, int nodeoffset, const char *name,
+ uint32_t val)
+{
+ fdt32_t tmp = cpu_to_fdt32(val);
+ return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
+}
+
+/**
+ * fdt_setprop_u64 - set a property to a 64-bit integer
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 64-bit integer value for the property (native endian)
+ *
+ * fdt_setprop_u64() sets the value of the named property in the given
+ * node to the given 64-bit integer value (converting to big-endian if
+ * necessary), or creates a new property with that value if it does
+ * not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_setprop_u64(void *fdt, int nodeoffset, const char *name,
+ uint64_t val)
+{
+ fdt64_t tmp = cpu_to_fdt64(val);
+ return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
+}
+
+/**
+ * fdt_setprop_cell - set a property to a single cell value
+ *
+ * This is an alternative name for fdt_setprop_u32()
+ */
+static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
+ uint32_t val)
+{
+ return fdt_setprop_u32(fdt, nodeoffset, name, val);
+}
+
+/**
+ * fdt_setprop_string - set a property to a string value
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @str: string value for the property
+ *
+ * fdt_setprop_string() sets the value of the named property in the
+ * given node to the given string value (using the length of the
+ * string to determine the new length of the property), or creates a
+ * new property with that value if it does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+#define fdt_setprop_string(fdt, nodeoffset, name, str) \
+ fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
+
+
+/**
+ * fdt_setprop_empty - set a property to an empty value
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ *
+ * fdt_setprop_empty() sets the value of the named property in the
+ * given node to an empty (zero length) value, or creates a new empty
+ * property if it does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+#define fdt_setprop_empty(fdt, nodeoffset, name) \
+ fdt_setprop((fdt), (nodeoffset), (name), NULL, 0)
+
+/**
+ * fdt_appendprop - append to or create a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to append to
+ * @val: pointer to data to append to the property value
+ * @len: length of the data to append to the property value
+ *
+ * fdt_appendprop() appends the value to the named property in the
+ * given node, creating the property if it does not already exist.
+ *
+ * This function may insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_appendprop(void *fdt, int nodeoffset, const char *name,
+ const void *val, int len);
+
+/**
+ * fdt_appendprop_u32 - append a 32-bit integer value to a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 32-bit integer value to append to the property (native endian)
+ *
+ * fdt_appendprop_u32() appends the given 32-bit integer value
+ * (converting to big-endian if necessary) to the value of the named
+ * property in the given node, or creates a new property with that
+ * value if it does not already exist.
+ *
+ * This function may insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_appendprop_u32(void *fdt, int nodeoffset,
+ const char *name, uint32_t val)
+{
+ fdt32_t tmp = cpu_to_fdt32(val);
+ return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
+}
+
+/**
+ * fdt_appendprop_u64 - append a 64-bit integer value to a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 64-bit integer value to append to the property (native endian)
+ *
+ * fdt_appendprop_u64() appends the given 64-bit integer value
+ * (converting to big-endian if necessary) to the value of the named
+ * property in the given node, or creates a new property with that
+ * value if it does not already exist.
+ *
+ * This function may insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_appendprop_u64(void *fdt, int nodeoffset,
+ const char *name, uint64_t val)
+{
+ fdt64_t tmp = cpu_to_fdt64(val);
+ return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
+}
+
+/**
+ * fdt_appendprop_cell - append a single cell value to a property
+ *
+ * This is an alternative name for fdt_appendprop_u32()
+ */
+static inline int fdt_appendprop_cell(void *fdt, int nodeoffset,
+ const char *name, uint32_t val)
+{
+ return fdt_appendprop_u32(fdt, nodeoffset, name, val);
+}
+
+/**
+ * fdt_appendprop_string - append a string to a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @str: string value to append to the property
+ *
+ * fdt_appendprop_string() appends the given string to the value of
+ * the named property in the given node, or creates a new property
+ * with that value if it does not already exist.
+ *
+ * This function may insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+#define fdt_appendprop_string(fdt, nodeoffset, name, str) \
+ fdt_appendprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
+
+/**
+ * fdt_delprop - delete a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to nop
+ * @name: name of the property to nop
+ *
+ * fdt_del_property() will delete the given property.
+ *
+ * This function will delete data from the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_delprop(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_add_subnode_namelen - creates a new node based on substring
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_add_subnode(), but use only the first namelen
+ * characters of name as the name of the new node. This is useful for
+ * creating subnodes based on a portion of a larger string, such as a
+ * full path.
+ */
+#ifndef SWIG /* Not available in Python */
+int fdt_add_subnode_namelen(void *fdt, int parentoffset,
+ const char *name, int namelen);
+#endif
+
+/**
+ * fdt_add_subnode - creates a new node
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ *
+ * fdt_add_subnode() creates a new node as a subnode of the node at
+ * structure block offset parentoffset, with the given name (which
+ * should include the unit address, if any).
+ *
+ * This function will insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+
+ * returns:
+ * structure block offset of the created nodeequested subnode (>=0), on
+ * success
+ * -FDT_ERR_NOTFOUND, if the requested subnode does not exist
+ * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE
+ * tag
+ * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of
+ * the given name
+ * -FDT_ERR_NOSPACE, if there is insufficient free space in the
+ * blob to contain the new node
+ * -FDT_ERR_NOSPACE
+ * -FDT_ERR_BADLAYOUT
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_add_subnode(void *fdt, int parentoffset, const char *name);
+
+/**
+ * fdt_del_node - delete a node (subtree)
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to nop
+ *
+ * fdt_del_node() will remove the given node, including all its
+ * subnodes if any, from the blob.
+ *
+ * This function will delete data from the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_del_node(void *fdt, int nodeoffset);
+
+/**
+ * fdt_overlay_apply - Applies a DT overlay on a base DT
+ * @fdt: pointer to the base device tree blob
+ * @fdto: pointer to the device tree overlay blob
+ *
+ * fdt_overlay_apply() will apply the given device tree overlay on the
+ * given base device tree.
+ *
+ * Expect the base device tree to be modified, even if the function
+ * returns an error.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there's not enough space in the base device tree
+ * -FDT_ERR_NOTFOUND, the overlay points to some inexistant nodes or
+ * properties in the base DT
+ * -FDT_ERR_BADPHANDLE,
+ * -FDT_ERR_BADOVERLAY,
+ * -FDT_ERR_NOPHANDLES,
+ * -FDT_ERR_INTERNAL,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADOFFSET,
+ * -FDT_ERR_BADPATH,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_overlay_apply(void *fdt, void *fdto);
+
+/**********************************************************************/
+/* Debugging / informational functions */
+/**********************************************************************/
+
+const char *fdt_strerror(int errval);
+
+#endif /* LIBFDT_H */
--- /dev/null
+#ifndef LIBFDT_ENV_H
+#define LIBFDT_ENV_H
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ * Copyright 2012 Kim Phillips, Freescale Semiconductor.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stddef.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <limits.h>
+
+#ifdef __CHECKER__
+#define FDT_FORCE __attribute__((force))
+#define FDT_BITWISE __attribute__((bitwise))
+#else
+#define FDT_FORCE
+#define FDT_BITWISE
+#endif
+
+typedef uint16_t FDT_BITWISE fdt16_t;
+typedef uint32_t FDT_BITWISE fdt32_t;
+typedef uint64_t FDT_BITWISE fdt64_t;
+
+#define EXTRACT_BYTE(x, n) ((unsigned long long)((uint8_t *)&x)[n])
+#define CPU_TO_FDT16(x) ((EXTRACT_BYTE(x, 0) << 8) | EXTRACT_BYTE(x, 1))
+#define CPU_TO_FDT32(x) ((EXTRACT_BYTE(x, 0) << 24) | (EXTRACT_BYTE(x, 1) << 16) | \
+ (EXTRACT_BYTE(x, 2) << 8) | EXTRACT_BYTE(x, 3))
+#define CPU_TO_FDT64(x) ((EXTRACT_BYTE(x, 0) << 56) | (EXTRACT_BYTE(x, 1) << 48) | \
+ (EXTRACT_BYTE(x, 2) << 40) | (EXTRACT_BYTE(x, 3) << 32) | \
+ (EXTRACT_BYTE(x, 4) << 24) | (EXTRACT_BYTE(x, 5) << 16) | \
+ (EXTRACT_BYTE(x, 6) << 8) | EXTRACT_BYTE(x, 7))
+
+static inline uint16_t fdt16_to_cpu(fdt16_t x)
+{
+ return (FDT_FORCE uint16_t)CPU_TO_FDT16(x);
+}
+static inline fdt16_t cpu_to_fdt16(uint16_t x)
+{
+ return (FDT_FORCE fdt16_t)CPU_TO_FDT16(x);
+}
+
+static inline uint32_t fdt32_to_cpu(fdt32_t x)
+{
+ return (FDT_FORCE uint32_t)CPU_TO_FDT32(x);
+}
+static inline fdt32_t cpu_to_fdt32(uint32_t x)
+{
+ return (FDT_FORCE fdt32_t)CPU_TO_FDT32(x);
+}
+
+static inline uint64_t fdt64_to_cpu(fdt64_t x)
+{
+ return (FDT_FORCE uint64_t)CPU_TO_FDT64(x);
+}
+static inline fdt64_t cpu_to_fdt64(uint64_t x)
+{
+ return (FDT_FORCE fdt64_t)CPU_TO_FDT64(x);
+}
+#undef CPU_TO_FDT64
+#undef CPU_TO_FDT32
+#undef CPU_TO_FDT16
+#undef EXTRACT_BYTE
+
+#ifdef __APPLE__
+#include <AvailabilityMacros.h>
+
+/* strnlen() is not available on Mac OS < 10.7 */
+# if !defined(MAC_OS_X_VERSION_10_7) || (MAC_OS_X_VERSION_MAX_ALLOWED < \
+ MAC_OS_X_VERSION_10_7)
+
+#define strnlen fdt_strnlen
+
+/*
+ * fdt_strnlen: returns the length of a string or max_count - which ever is
+ * smallest.
+ * Input 1 string: the string whose size is to be determined
+ * Input 2 max_count: the maximum value returned by this function
+ * Output: length of the string or max_count (the smallest of the two)
+ */
+static inline size_t fdt_strnlen(const char *string, size_t max_count)
+{
+ const char *p = memchr(string, 0, max_count);
+ return p ? p - string : max_count;
+}
+
+#endif /* !defined(MAC_OS_X_VERSION_10_7) || (MAC_OS_X_VERSION_MAX_ALLOWED <
+ MAC_OS_X_VERSION_10_7) */
+
+#endif /* __APPLE__ */
+
+#endif /* LIBFDT_ENV_H */
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+/*
+ * Minimal sanity check for a read-only tree. fdt_ro_probe_() checks
+ * that the given buffer contains what appears to be a flattened
+ * device tree with sane information in its header.
+ */
+int fdt_ro_probe_(const void *fdt)
+{
+ if (fdt_magic(fdt) == FDT_MAGIC) {
+ /* Complete tree */
+ if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION)
+ return -FDT_ERR_BADVERSION;
+ if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION)
+ return -FDT_ERR_BADVERSION;
+ } else if (fdt_magic(fdt) == FDT_SW_MAGIC) {
+ /* Unfinished sequential-write blob */
+ if (fdt_size_dt_struct(fdt) == 0)
+ return -FDT_ERR_BADSTATE;
+ } else {
+ return -FDT_ERR_BADMAGIC;
+ }
+
+ return 0;
+}
+
+static int check_off_(uint32_t hdrsize, uint32_t totalsize, uint32_t off)
+{
+ return (off >= hdrsize) && (off <= totalsize);
+}
+
+static int check_block_(uint32_t hdrsize, uint32_t totalsize,
+ uint32_t base, uint32_t size)
+{
+ if (!check_off_(hdrsize, totalsize, base))
+ return 0; /* block start out of bounds */
+ if ((base + size) < base)
+ return 0; /* overflow */
+ if (!check_off_(hdrsize, totalsize, base + size))
+ return 0; /* block end out of bounds */
+ return 1;
+}
+
+size_t fdt_header_size_(uint32_t version)
+{
+ if (version <= 1)
+ return FDT_V1_SIZE;
+ else if (version <= 2)
+ return FDT_V2_SIZE;
+ else if (version <= 3)
+ return FDT_V3_SIZE;
+ else if (version <= 16)
+ return FDT_V16_SIZE;
+ else
+ return FDT_V17_SIZE;
+}
+
+int fdt_check_header(const void *fdt)
+{
+ size_t hdrsize;
+
+ if (fdt_magic(fdt) != FDT_MAGIC)
+ return -FDT_ERR_BADMAGIC;
+ hdrsize = fdt_header_size(fdt);
+ if ((fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION)
+ || (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION))
+ return -FDT_ERR_BADVERSION;
+ if (fdt_version(fdt) < fdt_last_comp_version(fdt))
+ return -FDT_ERR_BADVERSION;
+
+ if ((fdt_totalsize(fdt) < hdrsize)
+ || (fdt_totalsize(fdt) > INT_MAX))
+ return -FDT_ERR_TRUNCATED;
+
+ /* Bounds check memrsv block */
+ if (!check_off_(hdrsize, fdt_totalsize(fdt), fdt_off_mem_rsvmap(fdt)))
+ return -FDT_ERR_TRUNCATED;
+
+ /* Bounds check structure block */
+ if (fdt_version(fdt) < 17) {
+ if (!check_off_(hdrsize, fdt_totalsize(fdt),
+ fdt_off_dt_struct(fdt)))
+ return -FDT_ERR_TRUNCATED;
+ } else {
+ if (!check_block_(hdrsize, fdt_totalsize(fdt),
+ fdt_off_dt_struct(fdt),
+ fdt_size_dt_struct(fdt)))
+ return -FDT_ERR_TRUNCATED;
+ }
+
+ /* Bounds check strings block */
+ if (!check_block_(hdrsize, fdt_totalsize(fdt),
+ fdt_off_dt_strings(fdt), fdt_size_dt_strings(fdt)))
+ return -FDT_ERR_TRUNCATED;
+
+ return 0;
+}
+
+const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int len)
+{
+ unsigned absoffset = offset + fdt_off_dt_struct(fdt);
+
+ if ((absoffset < offset)
+ || ((absoffset + len) < absoffset)
+ || (absoffset + len) > fdt_totalsize(fdt))
+ return NULL;
+
+ if (fdt_version(fdt) >= 0x11)
+ if (((offset + len) < offset)
+ || ((offset + len) > fdt_size_dt_struct(fdt)))
+ return NULL;
+
+ return fdt_offset_ptr_(fdt, offset);
+}
+
+uint32_t fdt_next_tag(const void *fdt, int startoffset, int *nextoffset)
+{
+ const fdt32_t *tagp, *lenp;
+ uint32_t tag;
+ int offset = startoffset;
+ const char *p;
+
+ *nextoffset = -FDT_ERR_TRUNCATED;
+ tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE);
+ if (!tagp)
+ return FDT_END; /* premature end */
+ tag = fdt32_to_cpu(*tagp);
+ offset += FDT_TAGSIZE;
+
+ *nextoffset = -FDT_ERR_BADSTRUCTURE;
+ switch (tag) {
+ case FDT_BEGIN_NODE:
+ /* skip name */
+ do {
+ p = fdt_offset_ptr(fdt, offset++, 1);
+ } while (p && (*p != '\0'));
+ if (!p)
+ return FDT_END; /* premature end */
+ break;
+
+ case FDT_PROP:
+ lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp));
+ if (!lenp)
+ return FDT_END; /* premature end */
+ /* skip-name offset, length and value */
+ offset += sizeof(struct fdt_property) - FDT_TAGSIZE
+ + fdt32_to_cpu(*lenp);
+ if (fdt_version(fdt) < 0x10 && fdt32_to_cpu(*lenp) >= 8 &&
+ ((offset - fdt32_to_cpu(*lenp)) % 8) != 0)
+ offset += 4;
+ break;
+
+ case FDT_END:
+ case FDT_END_NODE:
+ case FDT_NOP:
+ break;
+
+ default:
+ return FDT_END;
+ }
+
+ if (!fdt_offset_ptr(fdt, startoffset, offset - startoffset))
+ return FDT_END; /* premature end */
+
+ *nextoffset = FDT_TAGALIGN(offset);
+ return tag;
+}
+
+int fdt_check_node_offset_(const void *fdt, int offset)
+{
+ if ((offset < 0) || (offset % FDT_TAGSIZE)
+ || (fdt_next_tag(fdt, offset, &offset) != FDT_BEGIN_NODE))
+ return -FDT_ERR_BADOFFSET;
+
+ return offset;
+}
+
+int fdt_check_prop_offset_(const void *fdt, int offset)
+{
+ if ((offset < 0) || (offset % FDT_TAGSIZE)
+ || (fdt_next_tag(fdt, offset, &offset) != FDT_PROP))
+ return -FDT_ERR_BADOFFSET;
+
+ return offset;
+}
+
+int fdt_next_node(const void *fdt, int offset, int *depth)
+{
+ int nextoffset = 0;
+ uint32_t tag;
+
+ if (offset >= 0)
+ if ((nextoffset = fdt_check_node_offset_(fdt, offset)) < 0)
+ return nextoffset;
+
+ do {
+ offset = nextoffset;
+ tag = fdt_next_tag(fdt, offset, &nextoffset);
+
+ switch (tag) {
+ case FDT_PROP:
+ case FDT_NOP:
+ break;
+
+ case FDT_BEGIN_NODE:
+ if (depth)
+ (*depth)++;
+ break;
+
+ case FDT_END_NODE:
+ if (depth && ((--(*depth)) < 0))
+ return nextoffset;
+ break;
+
+ case FDT_END:
+ if ((nextoffset >= 0)
+ || ((nextoffset == -FDT_ERR_TRUNCATED) && !depth))
+ return -FDT_ERR_NOTFOUND;
+ else
+ return nextoffset;
+ }
+ } while (tag != FDT_BEGIN_NODE);
+
+ return offset;
+}
+
+int fdt_first_subnode(const void *fdt, int offset)
+{
+ int depth = 0;
+
+ offset = fdt_next_node(fdt, offset, &depth);
+ if (offset < 0 || depth != 1)
+ return -FDT_ERR_NOTFOUND;
+
+ return offset;
+}
+
+int fdt_next_subnode(const void *fdt, int offset)
+{
+ int depth = 1;
+
+ /*
+ * With respect to the parent, the depth of the next subnode will be
+ * the same as the last.
+ */
+ do {
+ offset = fdt_next_node(fdt, offset, &depth);
+ if (offset < 0 || depth < 1)
+ return -FDT_ERR_NOTFOUND;
+ } while (depth > 1);
+
+ return offset;
+}
+
+const char *fdt_find_string_(const char *strtab, int tabsize, const char *s)
+{
+ int len = strlen(s) + 1;
+ const char *last = strtab + tabsize - len;
+ const char *p;
+
+ for (p = strtab; p <= last; p++)
+ if (memcmp(p, s, len) == 0)
+ return p;
+ return NULL;
+}
+
+int fdt_move(const void *fdt, void *buf, int bufsize)
+{
+ FDT_RO_PROBE(fdt);
+
+ if (fdt_totalsize(fdt) > bufsize)
+ return -FDT_ERR_NOSPACE;
+
+ memmove(buf, fdt, fdt_totalsize(fdt));
+ return 0;
+}
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2014 David Gibson <david@gibson.dropbear.id.au>
+ * Copyright (C) 2018 embedded brains GmbH
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+static int fdt_cells(const void *fdt, int nodeoffset, const char *name)
+{
+ const fdt32_t *c;
+ int val;
+ int len;
+
+ c = fdt_getprop(fdt, nodeoffset, name, &len);
+ if (!c)
+ return 2;
+
+ if (len != sizeof(*c))
+ return -FDT_ERR_BADNCELLS;
+
+ val = fdt32_to_cpu(*c);
+ if ((val <= 0) || (val > FDT_MAX_NCELLS))
+ return -FDT_ERR_BADNCELLS;
+
+ return val;
+}
+
+int fdt_address_cells(const void *fdt, int nodeoffset)
+{
+ return fdt_cells(fdt, nodeoffset, "#address-cells");
+}
+
+int fdt_size_cells(const void *fdt, int nodeoffset)
+{
+ return fdt_cells(fdt, nodeoffset, "#size-cells");
+}
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2012 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+int fdt_create_empty_tree(void *buf, int bufsize)
+{
+ int err;
+
+ err = fdt_create(buf, bufsize);
+ if (err)
+ return err;
+
+ err = fdt_finish_reservemap(buf);
+ if (err)
+ return err;
+
+ err = fdt_begin_node(buf, "");
+ if (err)
+ return err;
+
+ err = fdt_end_node(buf);
+ if (err)
+ return err;
+
+ err = fdt_finish(buf);
+ if (err)
+ return err;
+
+ return fdt_open_into(buf, buf, bufsize);
+}
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2016 Free Electrons
+ * Copyright (C) 2016 NextThing Co.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+/**
+ * overlay_get_target_phandle - retrieves the target phandle of a fragment
+ * @fdto: pointer to the device tree overlay blob
+ * @fragment: node offset of the fragment in the overlay
+ *
+ * overlay_get_target_phandle() retrieves the target phandle of an
+ * overlay fragment when that fragment uses a phandle (target
+ * property) instead of a path (target-path property).
+ *
+ * returns:
+ * the phandle pointed by the target property
+ * 0, if the phandle was not found
+ * -1, if the phandle was malformed
+ */
+static uint32_t overlay_get_target_phandle(const void *fdto, int fragment)
+{
+ const fdt32_t *val;
+ int len;
+
+ val = fdt_getprop(fdto, fragment, "target", &len);
+ if (!val)
+ return 0;
+
+ if ((len != sizeof(*val)) || (fdt32_to_cpu(*val) == (uint32_t)-1))
+ return (uint32_t)-1;
+
+ return fdt32_to_cpu(*val);
+}
+
+/**
+ * overlay_get_target - retrieves the offset of a fragment's target
+ * @fdt: Base device tree blob
+ * @fdto: Device tree overlay blob
+ * @fragment: node offset of the fragment in the overlay
+ * @pathp: pointer which receives the path of the target (or NULL)
+ *
+ * overlay_get_target() retrieves the target offset in the base
+ * device tree of a fragment, no matter how the actual targetting is
+ * done (through a phandle or a path)
+ *
+ * returns:
+ * the targetted node offset in the base device tree
+ * Negative error code on error
+ */
+static int overlay_get_target(const void *fdt, const void *fdto,
+ int fragment, char const **pathp)
+{
+ uint32_t phandle;
+ const char *path = NULL;
+ int path_len = 0, ret;
+
+ /* Try first to do a phandle based lookup */
+ phandle = overlay_get_target_phandle(fdto, fragment);
+ if (phandle == (uint32_t)-1)
+ return -FDT_ERR_BADPHANDLE;
+
+ /* no phandle, try path */
+ if (!phandle) {
+ /* And then a path based lookup */
+ path = fdt_getprop(fdto, fragment, "target-path", &path_len);
+ if (path)
+ ret = fdt_path_offset(fdt, path);
+ else
+ ret = path_len;
+ } else
+ ret = fdt_node_offset_by_phandle(fdt, phandle);
+
+ /*
+ * If we haven't found either a target or a
+ * target-path property in a node that contains a
+ * __overlay__ subnode (we wouldn't be called
+ * otherwise), consider it a improperly written
+ * overlay
+ */
+ if (ret < 0 && path_len == -FDT_ERR_NOTFOUND)
+ ret = -FDT_ERR_BADOVERLAY;
+
+ /* return on error */
+ if (ret < 0)
+ return ret;
+
+ /* return pointer to path (if available) */
+ if (pathp)
+ *pathp = path ? path : NULL;
+
+ return ret;
+}
+
+/**
+ * overlay_phandle_add_offset - Increases a phandle by an offset
+ * @fdt: Base device tree blob
+ * @node: Device tree overlay blob
+ * @name: Name of the property to modify (phandle or linux,phandle)
+ * @delta: offset to apply
+ *
+ * overlay_phandle_add_offset() increments a node phandle by a given
+ * offset.
+ *
+ * returns:
+ * 0 on success.
+ * Negative error code on error
+ */
+static int overlay_phandle_add_offset(void *fdt, int node,
+ const char *name, uint32_t delta)
+{
+ const fdt32_t *val;
+ uint32_t adj_val;
+ int len;
+
+ val = fdt_getprop(fdt, node, name, &len);
+ if (!val)
+ return len;
+
+ if (len != sizeof(*val))
+ return -FDT_ERR_BADPHANDLE;
+
+ adj_val = fdt32_to_cpu(*val);
+ if ((adj_val + delta) < adj_val)
+ return -FDT_ERR_NOPHANDLES;
+
+ adj_val += delta;
+ if (adj_val == (uint32_t)-1)
+ return -FDT_ERR_NOPHANDLES;
+
+ return fdt_setprop_inplace_u32(fdt, node, name, adj_val);
+}
+
+/**
+ * overlay_adjust_node_phandles - Offsets the phandles of a node
+ * @fdto: Device tree overlay blob
+ * @node: Offset of the node we want to adjust
+ * @delta: Offset to shift the phandles of
+ *
+ * overlay_adjust_node_phandles() adds a constant to all the phandles
+ * of a given node. This is mainly use as part of the overlay
+ * application process, when we want to update all the overlay
+ * phandles to not conflict with the overlays of the base device tree.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_adjust_node_phandles(void *fdto, int node,
+ uint32_t delta)
+{
+ int child;
+ int ret;
+
+ ret = overlay_phandle_add_offset(fdto, node, "phandle", delta);
+ if (ret && ret != -FDT_ERR_NOTFOUND)
+ return ret;
+
+ ret = overlay_phandle_add_offset(fdto, node, "linux,phandle", delta);
+ if (ret && ret != -FDT_ERR_NOTFOUND)
+ return ret;
+
+ fdt_for_each_subnode(child, fdto, node) {
+ ret = overlay_adjust_node_phandles(fdto, child, delta);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * overlay_adjust_local_phandles - Adjust the phandles of a whole overlay
+ * @fdto: Device tree overlay blob
+ * @delta: Offset to shift the phandles of
+ *
+ * overlay_adjust_local_phandles() adds a constant to all the
+ * phandles of an overlay. This is mainly use as part of the overlay
+ * application process, when we want to update all the overlay
+ * phandles to not conflict with the overlays of the base device tree.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_adjust_local_phandles(void *fdto, uint32_t delta)
+{
+ /*
+ * Start adjusting the phandles from the overlay root
+ */
+ return overlay_adjust_node_phandles(fdto, 0, delta);
+}
+
+/**
+ * overlay_update_local_node_references - Adjust the overlay references
+ * @fdto: Device tree overlay blob
+ * @tree_node: Node offset of the node to operate on
+ * @fixup_node: Node offset of the matching local fixups node
+ * @delta: Offset to shift the phandles of
+ *
+ * overlay_update_local_nodes_references() update the phandles
+ * pointing to a node within the device tree overlay by adding a
+ * constant delta.
+ *
+ * This is mainly used as part of a device tree application process,
+ * where you want the device tree overlays phandles to not conflict
+ * with the ones from the base device tree before merging them.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_update_local_node_references(void *fdto,
+ int tree_node,
+ int fixup_node,
+ uint32_t delta)
+{
+ int fixup_prop;
+ int fixup_child;
+ int ret;
+
+ fdt_for_each_property_offset(fixup_prop, fdto, fixup_node) {
+ const fdt32_t *fixup_val;
+ const char *tree_val;
+ const char *name;
+ int fixup_len;
+ int tree_len;
+ int i;
+
+ fixup_val = fdt_getprop_by_offset(fdto, fixup_prop,
+ &name, &fixup_len);
+ if (!fixup_val)
+ return fixup_len;
+
+ if (fixup_len % sizeof(uint32_t))
+ return -FDT_ERR_BADOVERLAY;
+
+ tree_val = fdt_getprop(fdto, tree_node, name, &tree_len);
+ if (!tree_val) {
+ if (tree_len == -FDT_ERR_NOTFOUND)
+ return -FDT_ERR_BADOVERLAY;
+
+ return tree_len;
+ }
+
+ for (i = 0; i < (fixup_len / sizeof(uint32_t)); i++) {
+ fdt32_t adj_val;
+ uint32_t poffset;
+
+ poffset = fdt32_to_cpu(fixup_val[i]);
+
+ /*
+ * phandles to fixup can be unaligned.
+ *
+ * Use a memcpy for the architectures that do
+ * not support unaligned accesses.
+ */
+ memcpy(&adj_val, tree_val + poffset, sizeof(adj_val));
+
+ adj_val = cpu_to_fdt32(fdt32_to_cpu(adj_val) + delta);
+
+ ret = fdt_setprop_inplace_namelen_partial(fdto,
+ tree_node,
+ name,
+ strlen(name),
+ poffset,
+ &adj_val,
+ sizeof(adj_val));
+ if (ret == -FDT_ERR_NOSPACE)
+ return -FDT_ERR_BADOVERLAY;
+
+ if (ret)
+ return ret;
+ }
+ }
+
+ fdt_for_each_subnode(fixup_child, fdto, fixup_node) {
+ const char *fixup_child_name = fdt_get_name(fdto, fixup_child,
+ NULL);
+ int tree_child;
+
+ tree_child = fdt_subnode_offset(fdto, tree_node,
+ fixup_child_name);
+ if (tree_child == -FDT_ERR_NOTFOUND)
+ return -FDT_ERR_BADOVERLAY;
+ if (tree_child < 0)
+ return tree_child;
+
+ ret = overlay_update_local_node_references(fdto,
+ tree_child,
+ fixup_child,
+ delta);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * overlay_update_local_references - Adjust the overlay references
+ * @fdto: Device tree overlay blob
+ * @delta: Offset to shift the phandles of
+ *
+ * overlay_update_local_references() update all the phandles pointing
+ * to a node within the device tree overlay by adding a constant
+ * delta to not conflict with the base overlay.
+ *
+ * This is mainly used as part of a device tree application process,
+ * where you want the device tree overlays phandles to not conflict
+ * with the ones from the base device tree before merging them.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_update_local_references(void *fdto, uint32_t delta)
+{
+ int fixups;
+
+ fixups = fdt_path_offset(fdto, "/__local_fixups__");
+ if (fixups < 0) {
+ /* There's no local phandles to adjust, bail out */
+ if (fixups == -FDT_ERR_NOTFOUND)
+ return 0;
+
+ return fixups;
+ }
+
+ /*
+ * Update our local references from the root of the tree
+ */
+ return overlay_update_local_node_references(fdto, 0, fixups,
+ delta);
+}
+
+/**
+ * overlay_fixup_one_phandle - Set an overlay phandle to the base one
+ * @fdt: Base Device Tree blob
+ * @fdto: Device tree overlay blob
+ * @symbols_off: Node offset of the symbols node in the base device tree
+ * @path: Path to a node holding a phandle in the overlay
+ * @path_len: number of path characters to consider
+ * @name: Name of the property holding the phandle reference in the overlay
+ * @name_len: number of name characters to consider
+ * @poffset: Offset within the overlay property where the phandle is stored
+ * @label: Label of the node referenced by the phandle
+ *
+ * overlay_fixup_one_phandle() resolves an overlay phandle pointing to
+ * a node in the base device tree.
+ *
+ * This is part of the device tree overlay application process, when
+ * you want all the phandles in the overlay to point to the actual
+ * base dt nodes.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_fixup_one_phandle(void *fdt, void *fdto,
+ int symbols_off,
+ const char *path, uint32_t path_len,
+ const char *name, uint32_t name_len,
+ int poffset, const char *label)
+{
+ const char *symbol_path;
+ uint32_t phandle;
+ fdt32_t phandle_prop;
+ int symbol_off, fixup_off;
+ int prop_len;
+
+ if (symbols_off < 0)
+ return symbols_off;
+
+ symbol_path = fdt_getprop(fdt, symbols_off, label,
+ &prop_len);
+ if (!symbol_path)
+ return prop_len;
+
+ symbol_off = fdt_path_offset(fdt, symbol_path);
+ if (symbol_off < 0)
+ return symbol_off;
+
+ phandle = fdt_get_phandle(fdt, symbol_off);
+ if (!phandle)
+ return -FDT_ERR_NOTFOUND;
+
+ fixup_off = fdt_path_offset_namelen(fdto, path, path_len);
+ if (fixup_off == -FDT_ERR_NOTFOUND)
+ return -FDT_ERR_BADOVERLAY;
+ if (fixup_off < 0)
+ return fixup_off;
+
+ phandle_prop = cpu_to_fdt32(phandle);
+ return fdt_setprop_inplace_namelen_partial(fdto, fixup_off,
+ name, name_len, poffset,
+ &phandle_prop,
+ sizeof(phandle_prop));
+};
+
+/**
+ * overlay_fixup_phandle - Set an overlay phandle to the base one
+ * @fdt: Base Device Tree blob
+ * @fdto: Device tree overlay blob
+ * @symbols_off: Node offset of the symbols node in the base device tree
+ * @property: Property offset in the overlay holding the list of fixups
+ *
+ * overlay_fixup_phandle() resolves all the overlay phandles pointed
+ * to in a __fixups__ property, and updates them to match the phandles
+ * in use in the base device tree.
+ *
+ * This is part of the device tree overlay application process, when
+ * you want all the phandles in the overlay to point to the actual
+ * base dt nodes.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_fixup_phandle(void *fdt, void *fdto, int symbols_off,
+ int property)
+{
+ const char *value;
+ const char *label;
+ int len;
+
+ value = fdt_getprop_by_offset(fdto, property,
+ &label, &len);
+ if (!value) {
+ if (len == -FDT_ERR_NOTFOUND)
+ return -FDT_ERR_INTERNAL;
+
+ return len;
+ }
+
+ do {
+ const char *path, *name, *fixup_end;
+ const char *fixup_str = value;
+ uint32_t path_len, name_len;
+ uint32_t fixup_len;
+ char *sep, *endptr;
+ int poffset, ret;
+
+ fixup_end = memchr(value, '\0', len);
+ if (!fixup_end)
+ return -FDT_ERR_BADOVERLAY;
+ fixup_len = fixup_end - fixup_str;
+
+ len -= fixup_len + 1;
+ value += fixup_len + 1;
+
+ path = fixup_str;
+ sep = memchr(fixup_str, ':', fixup_len);
+ if (!sep || *sep != ':')
+ return -FDT_ERR_BADOVERLAY;
+
+ path_len = sep - path;
+ if (path_len == (fixup_len - 1))
+ return -FDT_ERR_BADOVERLAY;
+
+ fixup_len -= path_len + 1;
+ name = sep + 1;
+ sep = memchr(name, ':', fixup_len);
+ if (!sep || *sep != ':')
+ return -FDT_ERR_BADOVERLAY;
+
+ name_len = sep - name;
+ if (!name_len)
+ return -FDT_ERR_BADOVERLAY;
+
+ poffset = strtoul(sep + 1, &endptr, 10);
+ if ((*endptr != '\0') || (endptr <= (sep + 1)))
+ return -FDT_ERR_BADOVERLAY;
+
+ ret = overlay_fixup_one_phandle(fdt, fdto, symbols_off,
+ path, path_len, name, name_len,
+ poffset, label);
+ if (ret)
+ return ret;
+ } while (len > 0);
+
+ return 0;
+}
+
+/**
+ * overlay_fixup_phandles - Resolve the overlay phandles to the base
+ * device tree
+ * @fdt: Base Device Tree blob
+ * @fdto: Device tree overlay blob
+ *
+ * overlay_fixup_phandles() resolves all the overlay phandles pointing
+ * to nodes in the base device tree.
+ *
+ * This is one of the steps of the device tree overlay application
+ * process, when you want all the phandles in the overlay to point to
+ * the actual base dt nodes.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_fixup_phandles(void *fdt, void *fdto)
+{
+ int fixups_off, symbols_off;
+ int property;
+
+ /* We can have overlays without any fixups */
+ fixups_off = fdt_path_offset(fdto, "/__fixups__");
+ if (fixups_off == -FDT_ERR_NOTFOUND)
+ return 0; /* nothing to do */
+ if (fixups_off < 0)
+ return fixups_off;
+
+ /* And base DTs without symbols */
+ symbols_off = fdt_path_offset(fdt, "/__symbols__");
+ if ((symbols_off < 0 && (symbols_off != -FDT_ERR_NOTFOUND)))
+ return symbols_off;
+
+ fdt_for_each_property_offset(property, fdto, fixups_off) {
+ int ret;
+
+ ret = overlay_fixup_phandle(fdt, fdto, symbols_off, property);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * overlay_apply_node - Merges a node into the base device tree
+ * @fdt: Base Device Tree blob
+ * @target: Node offset in the base device tree to apply the fragment to
+ * @fdto: Device tree overlay blob
+ * @node: Node offset in the overlay holding the changes to merge
+ *
+ * overlay_apply_node() merges a node into a target base device tree
+ * node pointed.
+ *
+ * This is part of the final step in the device tree overlay
+ * application process, when all the phandles have been adjusted and
+ * resolved and you just have to merge overlay into the base device
+ * tree.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_apply_node(void *fdt, int target,
+ void *fdto, int node)
+{
+ int property;
+ int subnode;
+
+ fdt_for_each_property_offset(property, fdto, node) {
+ const char *name;
+ const void *prop;
+ int prop_len;
+ int ret;
+
+ prop = fdt_getprop_by_offset(fdto, property, &name,
+ &prop_len);
+ if (prop_len == -FDT_ERR_NOTFOUND)
+ return -FDT_ERR_INTERNAL;
+ if (prop_len < 0)
+ return prop_len;
+
+ ret = fdt_setprop(fdt, target, name, prop, prop_len);
+ if (ret)
+ return ret;
+ }
+
+ fdt_for_each_subnode(subnode, fdto, node) {
+ const char *name = fdt_get_name(fdto, subnode, NULL);
+ int nnode;
+ int ret;
+
+ nnode = fdt_add_subnode(fdt, target, name);
+ if (nnode == -FDT_ERR_EXISTS) {
+ nnode = fdt_subnode_offset(fdt, target, name);
+ if (nnode == -FDT_ERR_NOTFOUND)
+ return -FDT_ERR_INTERNAL;
+ }
+
+ if (nnode < 0)
+ return nnode;
+
+ ret = overlay_apply_node(fdt, nnode, fdto, subnode);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * overlay_merge - Merge an overlay into its base device tree
+ * @fdt: Base Device Tree blob
+ * @fdto: Device tree overlay blob
+ *
+ * overlay_merge() merges an overlay into its base device tree.
+ *
+ * This is the next to last step in the device tree overlay application
+ * process, when all the phandles have been adjusted and resolved and
+ * you just have to merge overlay into the base device tree.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_merge(void *fdt, void *fdto)
+{
+ int fragment;
+
+ fdt_for_each_subnode(fragment, fdto, 0) {
+ int overlay;
+ int target;
+ int ret;
+
+ /*
+ * Each fragments will have an __overlay__ node. If
+ * they don't, it's not supposed to be merged
+ */
+ overlay = fdt_subnode_offset(fdto, fragment, "__overlay__");
+ if (overlay == -FDT_ERR_NOTFOUND)
+ continue;
+
+ if (overlay < 0)
+ return overlay;
+
+ target = overlay_get_target(fdt, fdto, fragment, NULL);
+ if (target < 0)
+ return target;
+
+ ret = overlay_apply_node(fdt, target, fdto, overlay);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int get_path_len(const void *fdt, int nodeoffset)
+{
+ int len = 0, namelen;
+ const char *name;
+
+ FDT_RO_PROBE(fdt);
+
+ for (;;) {
+ name = fdt_get_name(fdt, nodeoffset, &namelen);
+ if (!name)
+ return namelen;
+
+ /* root? we're done */
+ if (namelen == 0)
+ break;
+
+ nodeoffset = fdt_parent_offset(fdt, nodeoffset);
+ if (nodeoffset < 0)
+ return nodeoffset;
+ len += namelen + 1;
+ }
+
+ /* in case of root pretend it's "/" */
+ if (len == 0)
+ len++;
+ return len;
+}
+
+/**
+ * overlay_symbol_update - Update the symbols of base tree after a merge
+ * @fdt: Base Device Tree blob
+ * @fdto: Device tree overlay blob
+ *
+ * overlay_symbol_update() updates the symbols of the base tree with the
+ * symbols of the applied overlay
+ *
+ * This is the last step in the device tree overlay application
+ * process, allowing the reference of overlay symbols by subsequent
+ * overlay operations.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_symbol_update(void *fdt, void *fdto)
+{
+ int root_sym, ov_sym, prop, path_len, fragment, target;
+ int len, frag_name_len, ret, rel_path_len;
+ const char *s, *e;
+ const char *path;
+ const char *name;
+ const char *frag_name;
+ const char *rel_path;
+ const char *target_path;
+ char *buf;
+ void *p;
+
+ ov_sym = fdt_subnode_offset(fdto, 0, "__symbols__");
+
+ /* if no overlay symbols exist no problem */
+ if (ov_sym < 0)
+ return 0;
+
+ root_sym = fdt_subnode_offset(fdt, 0, "__symbols__");
+
+ /* it no root symbols exist we should create them */
+ if (root_sym == -FDT_ERR_NOTFOUND)
+ root_sym = fdt_add_subnode(fdt, 0, "__symbols__");
+
+ /* any error is fatal now */
+ if (root_sym < 0)
+ return root_sym;
+
+ /* iterate over each overlay symbol */
+ fdt_for_each_property_offset(prop, fdto, ov_sym) {
+ path = fdt_getprop_by_offset(fdto, prop, &name, &path_len);
+ if (!path)
+ return path_len;
+
+ /* verify it's a string property (terminated by a single \0) */
+ if (path_len < 1 || memchr(path, '\0', path_len) != &path[path_len - 1])
+ return -FDT_ERR_BADVALUE;
+
+ /* keep end marker to avoid strlen() */
+ e = path + path_len;
+
+ /* format: /<fragment-name>/__overlay__/<relative-subnode-path> */
+
+ if (*path != '/')
+ return -FDT_ERR_BADVALUE;
+
+ /* get fragment name first */
+ s = strchr(path + 1, '/');
+ if (!s)
+ return -FDT_ERR_BADOVERLAY;
+
+ frag_name = path + 1;
+ frag_name_len = s - path - 1;
+
+ /* verify format; safe since "s" lies in \0 terminated prop */
+ len = sizeof("/__overlay__/") - 1;
+ if ((e - s) < len || memcmp(s, "/__overlay__/", len))
+ return -FDT_ERR_BADOVERLAY;
+
+ rel_path = s + len;
+ rel_path_len = e - rel_path;
+
+ /* find the fragment index in which the symbol lies */
+ ret = fdt_subnode_offset_namelen(fdto, 0, frag_name,
+ frag_name_len);
+ /* not found? */
+ if (ret < 0)
+ return -FDT_ERR_BADOVERLAY;
+ fragment = ret;
+
+ /* an __overlay__ subnode must exist */
+ ret = fdt_subnode_offset(fdto, fragment, "__overlay__");
+ if (ret < 0)
+ return -FDT_ERR_BADOVERLAY;
+
+ /* get the target of the fragment */
+ ret = overlay_get_target(fdt, fdto, fragment, &target_path);
+ if (ret < 0)
+ return ret;
+ target = ret;
+
+ /* if we have a target path use */
+ if (!target_path) {
+ ret = get_path_len(fdt, target);
+ if (ret < 0)
+ return ret;
+ len = ret;
+ } else {
+ len = strlen(target_path);
+ }
+
+ ret = fdt_setprop_placeholder(fdt, root_sym, name,
+ len + (len > 1) + rel_path_len + 1, &p);
+ if (ret < 0)
+ return ret;
+
+ if (!target_path) {
+ /* again in case setprop_placeholder changed it */
+ ret = overlay_get_target(fdt, fdto, fragment, &target_path);
+ if (ret < 0)
+ return ret;
+ target = ret;
+ }
+
+ buf = p;
+ if (len > 1) { /* target is not root */
+ if (!target_path) {
+ ret = fdt_get_path(fdt, target, buf, len + 1);
+ if (ret < 0)
+ return ret;
+ } else
+ memcpy(buf, target_path, len + 1);
+
+ } else
+ len--;
+
+ buf[len] = '/';
+ memcpy(buf + len + 1, rel_path, rel_path_len);
+ buf[len + 1 + rel_path_len] = '\0';
+ }
+
+ return 0;
+}
+
+int fdt_overlay_apply(void *fdt, void *fdto)
+{
+ uint32_t delta = fdt_get_max_phandle(fdt);
+ int ret;
+
+ FDT_RO_PROBE(fdt);
+ FDT_RO_PROBE(fdto);
+
+ ret = overlay_adjust_local_phandles(fdto, delta);
+ if (ret)
+ goto err;
+
+ ret = overlay_update_local_references(fdto, delta);
+ if (ret)
+ goto err;
+
+ ret = overlay_fixup_phandles(fdt, fdto);
+ if (ret)
+ goto err;
+
+ ret = overlay_merge(fdt, fdto);
+ if (ret)
+ goto err;
+
+ ret = overlay_symbol_update(fdt, fdto);
+ if (ret)
+ goto err;
+
+ /*
+ * The overlay has been damaged, erase its magic.
+ */
+ fdt_set_magic(fdto, ~0);
+
+ return 0;
+
+err:
+ /*
+ * The overlay might have been damaged, erase its magic.
+ */
+ fdt_set_magic(fdto, ~0);
+
+ /*
+ * The base device tree might have been damaged, erase its
+ * magic.
+ */
+ fdt_set_magic(fdt, ~0);
+
+ return ret;
+}
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+static int fdt_nodename_eq_(const void *fdt, int offset,
+ const char *s, int len)
+{
+ int olen;
+ const char *p = fdt_get_name(fdt, offset, &olen);
+
+ if (!p || olen < len)
+ /* short match */
+ return 0;
+
+ if (memcmp(p, s, len) != 0)
+ return 0;
+
+ if (p[len] == '\0')
+ return 1;
+ else if (!memchr(s, '@', len) && (p[len] == '@'))
+ return 1;
+ else
+ return 0;
+}
+
+const char *fdt_get_string(const void *fdt, int stroffset, int *lenp)
+{
+ uint32_t absoffset = stroffset + fdt_off_dt_strings(fdt);
+ size_t len;
+ int err;
+ const char *s, *n;
+
+ err = fdt_ro_probe_(fdt);
+ if (err != 0)
+ goto fail;
+
+ err = -FDT_ERR_BADOFFSET;
+ if (absoffset >= fdt_totalsize(fdt))
+ goto fail;
+ len = fdt_totalsize(fdt) - absoffset;
+
+ if (fdt_magic(fdt) == FDT_MAGIC) {
+ if (stroffset < 0)
+ goto fail;
+ if (fdt_version(fdt) >= 17) {
+ if (stroffset >= fdt_size_dt_strings(fdt))
+ goto fail;
+ if ((fdt_size_dt_strings(fdt) - stroffset) < len)
+ len = fdt_size_dt_strings(fdt) - stroffset;
+ }
+ } else if (fdt_magic(fdt) == FDT_SW_MAGIC) {
+ if ((stroffset >= 0)
+ || (stroffset < -fdt_size_dt_strings(fdt)))
+ goto fail;
+ if ((-stroffset) < len)
+ len = -stroffset;
+ } else {
+ err = -FDT_ERR_INTERNAL;
+ goto fail;
+ }
+
+ s = (const char *)fdt + absoffset;
+ n = memchr(s, '\0', len);
+ if (!n) {
+ /* missing terminating NULL */
+ err = -FDT_ERR_TRUNCATED;
+ goto fail;
+ }
+
+ if (lenp)
+ *lenp = n - s;
+ return s;
+
+fail:
+ if (lenp)
+ *lenp = err;
+ return NULL;
+}
+
+const char *fdt_string(const void *fdt, int stroffset)
+{
+ return fdt_get_string(fdt, stroffset, NULL);
+}
+
+static int fdt_string_eq_(const void *fdt, int stroffset,
+ const char *s, int len)
+{
+ int slen;
+ const char *p = fdt_get_string(fdt, stroffset, &slen);
+
+ return p && (slen == len) && (memcmp(p, s, len) == 0);
+}
+
+uint32_t fdt_get_max_phandle(const void *fdt)
+{
+ uint32_t max_phandle = 0;
+ int offset;
+
+ for (offset = fdt_next_node(fdt, -1, NULL);;
+ offset = fdt_next_node(fdt, offset, NULL)) {
+ uint32_t phandle;
+
+ if (offset == -FDT_ERR_NOTFOUND)
+ return max_phandle;
+
+ if (offset < 0)
+ return (uint32_t)-1;
+
+ phandle = fdt_get_phandle(fdt, offset);
+ if (phandle == (uint32_t)-1)
+ continue;
+
+ if (phandle > max_phandle)
+ max_phandle = phandle;
+ }
+
+ return 0;
+}
+
+static const struct fdt_reserve_entry *fdt_mem_rsv(const void *fdt, int n)
+{
+ int offset = n * sizeof(struct fdt_reserve_entry);
+ int absoffset = fdt_off_mem_rsvmap(fdt) + offset;
+
+ if (absoffset < fdt_off_mem_rsvmap(fdt))
+ return NULL;
+ if (absoffset > fdt_totalsize(fdt) - sizeof(struct fdt_reserve_entry))
+ return NULL;
+ return fdt_mem_rsv_(fdt, n);
+}
+
+int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size)
+{
+ const struct fdt_reserve_entry *re;
+
+ FDT_RO_PROBE(fdt);
+ re = fdt_mem_rsv(fdt, n);
+ if (!re)
+ return -FDT_ERR_BADOFFSET;
+
+ *address = fdt64_ld(&re->address);
+ *size = fdt64_ld(&re->size);
+ return 0;
+}
+
+int fdt_num_mem_rsv(const void *fdt)
+{
+ int i;
+ const struct fdt_reserve_entry *re;
+
+ for (i = 0; (re = fdt_mem_rsv(fdt, i)) != NULL; i++) {
+ if (fdt64_ld(&re->size) == 0)
+ return i;
+ }
+ return -FDT_ERR_TRUNCATED;
+}
+
+static int nextprop_(const void *fdt, int offset)
+{
+ uint32_t tag;
+ int nextoffset;
+
+ do {
+ tag = fdt_next_tag(fdt, offset, &nextoffset);
+
+ switch (tag) {
+ case FDT_END:
+ if (nextoffset >= 0)
+ return -FDT_ERR_BADSTRUCTURE;
+ else
+ return nextoffset;
+
+ case FDT_PROP:
+ return offset;
+ }
+ offset = nextoffset;
+ } while (tag == FDT_NOP);
+
+ return -FDT_ERR_NOTFOUND;
+}
+
+int fdt_subnode_offset_namelen(const void *fdt, int offset,
+ const char *name, int namelen)
+{
+ int depth;
+
+ FDT_RO_PROBE(fdt);
+
+ for (depth = 0;
+ (offset >= 0) && (depth >= 0);
+ offset = fdt_next_node(fdt, offset, &depth))
+ if ((depth == 1)
+ && fdt_nodename_eq_(fdt, offset, name, namelen))
+ return offset;
+
+ if (depth < 0)
+ return -FDT_ERR_NOTFOUND;
+ return offset; /* error */
+}
+
+int fdt_subnode_offset(const void *fdt, int parentoffset,
+ const char *name)
+{
+ return fdt_subnode_offset_namelen(fdt, parentoffset, name, strlen(name));
+}
+
+int fdt_path_offset_namelen(const void *fdt, const char *path, int namelen)
+{
+ const char *end = path + namelen;
+ const char *p = path;
+ int offset = 0;
+
+ FDT_RO_PROBE(fdt);
+
+ /* see if we have an alias */
+ if (*path != '/') {
+ const char *q = memchr(path, '/', end - p);
+
+ if (!q)
+ q = end;
+
+ p = fdt_get_alias_namelen(fdt, p, q - p);
+ if (!p)
+ return -FDT_ERR_BADPATH;
+ offset = fdt_path_offset(fdt, p);
+
+ p = q;
+ }
+
+ while (p < end) {
+ const char *q;
+
+ while (*p == '/') {
+ p++;
+ if (p == end)
+ return offset;
+ }
+ q = memchr(p, '/', end - p);
+ if (! q)
+ q = end;
+
+ offset = fdt_subnode_offset_namelen(fdt, offset, p, q-p);
+ if (offset < 0)
+ return offset;
+
+ p = q;
+ }
+
+ return offset;
+}
+
+int fdt_path_offset(const void *fdt, const char *path)
+{
+ return fdt_path_offset_namelen(fdt, path, strlen(path));
+}
+
+const char *fdt_get_name(const void *fdt, int nodeoffset, int *len)
+{
+ const struct fdt_node_header *nh = fdt_offset_ptr_(fdt, nodeoffset);
+ const char *nameptr;
+ int err;
+
+ if (((err = fdt_ro_probe_(fdt)) != 0)
+ || ((err = fdt_check_node_offset_(fdt, nodeoffset)) < 0))
+ goto fail;
+
+ nameptr = nh->name;
+
+ if (fdt_version(fdt) < 0x10) {
+ /*
+ * For old FDT versions, match the naming conventions of V16:
+ * give only the leaf name (after all /). The actual tree
+ * contents are loosely checked.
+ */
+ const char *leaf;
+ leaf = strrchr(nameptr, '/');
+ if (leaf == NULL) {
+ err = -FDT_ERR_BADSTRUCTURE;
+ goto fail;
+ }
+ nameptr = leaf+1;
+ }
+
+ if (len)
+ *len = strlen(nameptr);
+
+ return nameptr;
+
+ fail:
+ if (len)
+ *len = err;
+ return NULL;
+}
+
+int fdt_first_property_offset(const void *fdt, int nodeoffset)
+{
+ int offset;
+
+ if ((offset = fdt_check_node_offset_(fdt, nodeoffset)) < 0)
+ return offset;
+
+ return nextprop_(fdt, offset);
+}
+
+int fdt_next_property_offset(const void *fdt, int offset)
+{
+ if ((offset = fdt_check_prop_offset_(fdt, offset)) < 0)
+ return offset;
+
+ return nextprop_(fdt, offset);
+}
+
+static const struct fdt_property *fdt_get_property_by_offset_(const void *fdt,
+ int offset,
+ int *lenp)
+{
+ int err;
+ const struct fdt_property *prop;
+
+ if ((err = fdt_check_prop_offset_(fdt, offset)) < 0) {
+ if (lenp)
+ *lenp = err;
+ return NULL;
+ }
+
+ prop = fdt_offset_ptr_(fdt, offset);
+
+ if (lenp)
+ *lenp = fdt32_ld(&prop->len);
+
+ return prop;
+}
+
+const struct fdt_property *fdt_get_property_by_offset(const void *fdt,
+ int offset,
+ int *lenp)
+{
+ /* Prior to version 16, properties may need realignment
+ * and this API does not work. fdt_getprop_*() will, however. */
+
+ if (fdt_version(fdt) < 0x10) {
+ if (lenp)
+ *lenp = -FDT_ERR_BADVERSION;
+ return NULL;
+ }
+
+ return fdt_get_property_by_offset_(fdt, offset, lenp);
+}
+
+static const struct fdt_property *fdt_get_property_namelen_(const void *fdt,
+ int offset,
+ const char *name,
+ int namelen,
+ int *lenp,
+ int *poffset)
+{
+ for (offset = fdt_first_property_offset(fdt, offset);
+ (offset >= 0);
+ (offset = fdt_next_property_offset(fdt, offset))) {
+ const struct fdt_property *prop;
+
+ if (!(prop = fdt_get_property_by_offset_(fdt, offset, lenp))) {
+ offset = -FDT_ERR_INTERNAL;
+ break;
+ }
+ if (fdt_string_eq_(fdt, fdt32_ld(&prop->nameoff),
+ name, namelen)) {
+ if (poffset)
+ *poffset = offset;
+ return prop;
+ }
+ }
+
+ if (lenp)
+ *lenp = offset;
+ return NULL;
+}
+
+
+const struct fdt_property *fdt_get_property_namelen(const void *fdt,
+ int offset,
+ const char *name,
+ int namelen, int *lenp)
+{
+ /* Prior to version 16, properties may need realignment
+ * and this API does not work. fdt_getprop_*() will, however. */
+ if (fdt_version(fdt) < 0x10) {
+ if (lenp)
+ *lenp = -FDT_ERR_BADVERSION;
+ return NULL;
+ }
+
+ return fdt_get_property_namelen_(fdt, offset, name, namelen, lenp,
+ NULL);
+}
+
+
+const struct fdt_property *fdt_get_property(const void *fdt,
+ int nodeoffset,
+ const char *name, int *lenp)
+{
+ return fdt_get_property_namelen(fdt, nodeoffset, name,
+ strlen(name), lenp);
+}
+
+const void *fdt_getprop_namelen(const void *fdt, int nodeoffset,
+ const char *name, int namelen, int *lenp)
+{
+ int poffset;
+ const struct fdt_property *prop;
+
+ prop = fdt_get_property_namelen_(fdt, nodeoffset, name, namelen, lenp,
+ &poffset);
+ if (!prop)
+ return NULL;
+
+ /* Handle realignment */
+ if (fdt_version(fdt) < 0x10 && (poffset + sizeof(*prop)) % 8 &&
+ fdt32_ld(&prop->len) >= 8)
+ return prop->data + 4;
+ return prop->data;
+}
+
+const void *fdt_getprop_by_offset(const void *fdt, int offset,
+ const char **namep, int *lenp)
+{
+ const struct fdt_property *prop;
+
+ prop = fdt_get_property_by_offset_(fdt, offset, lenp);
+ if (!prop)
+ return NULL;
+ if (namep) {
+ const char *name;
+ int namelen;
+ name = fdt_get_string(fdt, fdt32_ld(&prop->nameoff),
+ &namelen);
+ if (!name) {
+ if (lenp)
+ *lenp = namelen;
+ return NULL;
+ }
+ *namep = name;
+ }
+
+ /* Handle realignment */
+ if (fdt_version(fdt) < 0x10 && (offset + sizeof(*prop)) % 8 &&
+ fdt32_ld(&prop->len) >= 8)
+ return prop->data + 4;
+ return prop->data;
+}
+
+const void *fdt_getprop(const void *fdt, int nodeoffset,
+ const char *name, int *lenp)
+{
+ return fdt_getprop_namelen(fdt, nodeoffset, name, strlen(name), lenp);
+}
+
+uint32_t fdt_get_phandle(const void *fdt, int nodeoffset)
+{
+ const fdt32_t *php;
+ int len;
+
+ /* FIXME: This is a bit sub-optimal, since we potentially scan
+ * over all the properties twice. */
+ php = fdt_getprop(fdt, nodeoffset, "phandle", &len);
+ if (!php || (len != sizeof(*php))) {
+ php = fdt_getprop(fdt, nodeoffset, "linux,phandle", &len);
+ if (!php || (len != sizeof(*php)))
+ return 0;
+ }
+
+ return fdt32_ld(php);
+}
+
+const char *fdt_get_alias_namelen(const void *fdt,
+ const char *name, int namelen)
+{
+ int aliasoffset;
+
+ aliasoffset = fdt_path_offset(fdt, "/aliases");
+ if (aliasoffset < 0)
+ return NULL;
+
+ return fdt_getprop_namelen(fdt, aliasoffset, name, namelen, NULL);
+}
+
+const char *fdt_get_alias(const void *fdt, const char *name)
+{
+ return fdt_get_alias_namelen(fdt, name, strlen(name));
+}
+
+int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
+{
+ int pdepth = 0, p = 0;
+ int offset, depth, namelen;
+ const char *name;
+
+ FDT_RO_PROBE(fdt);
+
+ if (buflen < 2)
+ return -FDT_ERR_NOSPACE;
+
+ for (offset = 0, depth = 0;
+ (offset >= 0) && (offset <= nodeoffset);
+ offset = fdt_next_node(fdt, offset, &depth)) {
+ while (pdepth > depth) {
+ do {
+ p--;
+ } while (buf[p-1] != '/');
+ pdepth--;
+ }
+
+ if (pdepth >= depth) {
+ name = fdt_get_name(fdt, offset, &namelen);
+ if (!name)
+ return namelen;
+ if ((p + namelen + 1) <= buflen) {
+ memcpy(buf + p, name, namelen);
+ p += namelen;
+ buf[p++] = '/';
+ pdepth++;
+ }
+ }
+
+ if (offset == nodeoffset) {
+ if (pdepth < (depth + 1))
+ return -FDT_ERR_NOSPACE;
+
+ if (p > 1) /* special case so that root path is "/", not "" */
+ p--;
+ buf[p] = '\0';
+ return 0;
+ }
+ }
+
+ if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0))
+ return -FDT_ERR_BADOFFSET;
+ else if (offset == -FDT_ERR_BADOFFSET)
+ return -FDT_ERR_BADSTRUCTURE;
+
+ return offset; /* error from fdt_next_node() */
+}
+
+int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
+ int supernodedepth, int *nodedepth)
+{
+ int offset, depth;
+ int supernodeoffset = -FDT_ERR_INTERNAL;
+
+ FDT_RO_PROBE(fdt);
+
+ if (supernodedepth < 0)
+ return -FDT_ERR_NOTFOUND;
+
+ for (offset = 0, depth = 0;
+ (offset >= 0) && (offset <= nodeoffset);
+ offset = fdt_next_node(fdt, offset, &depth)) {
+ if (depth == supernodedepth)
+ supernodeoffset = offset;
+
+ if (offset == nodeoffset) {
+ if (nodedepth)
+ *nodedepth = depth;
+
+ if (supernodedepth > depth)
+ return -FDT_ERR_NOTFOUND;
+ else
+ return supernodeoffset;
+ }
+ }
+
+ if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0))
+ return -FDT_ERR_BADOFFSET;
+ else if (offset == -FDT_ERR_BADOFFSET)
+ return -FDT_ERR_BADSTRUCTURE;
+
+ return offset; /* error from fdt_next_node() */
+}
+
+int fdt_node_depth(const void *fdt, int nodeoffset)
+{
+ int nodedepth;
+ int err;
+
+ err = fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, &nodedepth);
+ if (err)
+ return (err < 0) ? err : -FDT_ERR_INTERNAL;
+ return nodedepth;
+}
+
+int fdt_parent_offset(const void *fdt, int nodeoffset)
+{
+ int nodedepth = fdt_node_depth(fdt, nodeoffset);
+
+ if (nodedepth < 0)
+ return nodedepth;
+ return fdt_supernode_atdepth_offset(fdt, nodeoffset,
+ nodedepth - 1, NULL);
+}
+
+int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
+ const char *propname,
+ const void *propval, int proplen)
+{
+ int offset;
+ const void *val;
+ int len;
+
+ FDT_RO_PROBE(fdt);
+
+ /* FIXME: The algorithm here is pretty horrible: we scan each
+ * property of a node in fdt_getprop(), then if that didn't
+ * find what we want, we scan over them again making our way
+ * to the next node. Still it's the easiest to implement
+ * approach; performance can come later. */
+ for (offset = fdt_next_node(fdt, startoffset, NULL);
+ offset >= 0;
+ offset = fdt_next_node(fdt, offset, NULL)) {
+ val = fdt_getprop(fdt, offset, propname, &len);
+ if (val && (len == proplen)
+ && (memcmp(val, propval, len) == 0))
+ return offset;
+ }
+
+ return offset; /* error from fdt_next_node() */
+}
+
+int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle)
+{
+ int offset;
+
+ if ((phandle == 0) || (phandle == -1))
+ return -FDT_ERR_BADPHANDLE;
+
+ FDT_RO_PROBE(fdt);
+
+ /* FIXME: The algorithm here is pretty horrible: we
+ * potentially scan each property of a node in
+ * fdt_get_phandle(), then if that didn't find what
+ * we want, we scan over them again making our way to the next
+ * node. Still it's the easiest to implement approach;
+ * performance can come later. */
+ for (offset = fdt_next_node(fdt, -1, NULL);
+ offset >= 0;
+ offset = fdt_next_node(fdt, offset, NULL)) {
+ if (fdt_get_phandle(fdt, offset) == phandle)
+ return offset;
+ }
+
+ return offset; /* error from fdt_next_node() */
+}
+
+int fdt_stringlist_contains(const char *strlist, int listlen, const char *str)
+{
+ int len = strlen(str);
+ const char *p;
+
+ while (listlen >= len) {
+ if (memcmp(str, strlist, len+1) == 0)
+ return 1;
+ p = memchr(strlist, '\0', listlen);
+ if (!p)
+ return 0; /* malformed strlist.. */
+ listlen -= (p-strlist) + 1;
+ strlist = p + 1;
+ }
+ return 0;
+}
+
+int fdt_stringlist_count(const void *fdt, int nodeoffset, const char *property)
+{
+ const char *list, *end;
+ int length, count = 0;
+
+ list = fdt_getprop(fdt, nodeoffset, property, &length);
+ if (!list)
+ return length;
+
+ end = list + length;
+
+ while (list < end) {
+ length = strnlen(list, end - list) + 1;
+
+ /* Abort if the last string isn't properly NUL-terminated. */
+ if (list + length > end)
+ return -FDT_ERR_BADVALUE;
+
+ list += length;
+ count++;
+ }
+
+ return count;
+}
+
+int fdt_stringlist_search(const void *fdt, int nodeoffset, const char *property,
+ const char *string)
+{
+ int length, len, idx = 0;
+ const char *list, *end;
+
+ list = fdt_getprop(fdt, nodeoffset, property, &length);
+ if (!list)
+ return length;
+
+ len = strlen(string) + 1;
+ end = list + length;
+
+ while (list < end) {
+ length = strnlen(list, end - list) + 1;
+
+ /* Abort if the last string isn't properly NUL-terminated. */
+ if (list + length > end)
+ return -FDT_ERR_BADVALUE;
+
+ if (length == len && memcmp(list, string, length) == 0)
+ return idx;
+
+ list += length;
+ idx++;
+ }
+
+ return -FDT_ERR_NOTFOUND;
+}
+
+const char *fdt_stringlist_get(const void *fdt, int nodeoffset,
+ const char *property, int idx,
+ int *lenp)
+{
+ const char *list, *end;
+ int length;
+
+ list = fdt_getprop(fdt, nodeoffset, property, &length);
+ if (!list) {
+ if (lenp)
+ *lenp = length;
+
+ return NULL;
+ }
+
+ end = list + length;
+
+ while (list < end) {
+ length = strnlen(list, end - list) + 1;
+
+ /* Abort if the last string isn't properly NUL-terminated. */
+ if (list + length > end) {
+ if (lenp)
+ *lenp = -FDT_ERR_BADVALUE;
+
+ return NULL;
+ }
+
+ if (idx == 0) {
+ if (lenp)
+ *lenp = length - 1;
+
+ return list;
+ }
+
+ list += length;
+ idx--;
+ }
+
+ if (lenp)
+ *lenp = -FDT_ERR_NOTFOUND;
+
+ return NULL;
+}
+
+int fdt_node_check_compatible(const void *fdt, int nodeoffset,
+ const char *compatible)
+{
+ const void *prop;
+ int len;
+
+ prop = fdt_getprop(fdt, nodeoffset, "compatible", &len);
+ if (!prop)
+ return len;
+
+ return !fdt_stringlist_contains(prop, len, compatible);
+}
+
+int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
+ const char *compatible)
+{
+ int offset, err;
+
+ FDT_RO_PROBE(fdt);
+
+ /* FIXME: The algorithm here is pretty horrible: we scan each
+ * property of a node in fdt_node_check_compatible(), then if
+ * that didn't find what we want, we scan over them again
+ * making our way to the next node. Still it's the easiest to
+ * implement approach; performance can come later. */
+ for (offset = fdt_next_node(fdt, startoffset, NULL);
+ offset >= 0;
+ offset = fdt_next_node(fdt, offset, NULL)) {
+ err = fdt_node_check_compatible(fdt, offset, compatible);
+ if ((err < 0) && (err != -FDT_ERR_NOTFOUND))
+ return err;
+ else if (err == 0)
+ return offset;
+ }
+
+ return offset; /* error from fdt_next_node() */
+}
+
+int fdt_check_full(const void *fdt, size_t bufsize)
+{
+ int err;
+ int num_memrsv;
+ int offset, nextoffset = 0;
+ uint32_t tag;
+ unsigned depth = 0;
+ const void *prop;
+ const char *propname;
+
+ if (bufsize < FDT_V1_SIZE)
+ return -FDT_ERR_TRUNCATED;
+ err = fdt_check_header(fdt);
+ if (err != 0)
+ return err;
+ if (bufsize < fdt_totalsize(fdt))
+ return -FDT_ERR_TRUNCATED;
+
+ num_memrsv = fdt_num_mem_rsv(fdt);
+ if (num_memrsv < 0)
+ return num_memrsv;
+
+ while (1) {
+ offset = nextoffset;
+ tag = fdt_next_tag(fdt, offset, &nextoffset);
+
+ if (nextoffset < 0)
+ return nextoffset;
+
+ switch (tag) {
+ case FDT_NOP:
+ break;
+
+ case FDT_END:
+ if (depth != 0)
+ return -FDT_ERR_BADSTRUCTURE;
+ return 0;
+
+ case FDT_BEGIN_NODE:
+ depth++;
+ if (depth > INT_MAX)
+ return -FDT_ERR_BADSTRUCTURE;
+ break;
+
+ case FDT_END_NODE:
+ if (depth == 0)
+ return -FDT_ERR_BADSTRUCTURE;
+ depth--;
+ break;
+
+ case FDT_PROP:
+ prop = fdt_getprop_by_offset(fdt, offset, &propname,
+ &err);
+ if (!prop)
+ return err;
+ break;
+
+ default:
+ return -FDT_ERR_INTERNAL;
+ }
+ }
+}
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+static int fdt_blocks_misordered_(const void *fdt,
+ int mem_rsv_size, int struct_size)
+{
+ return (fdt_off_mem_rsvmap(fdt) < FDT_ALIGN(sizeof(struct fdt_header), 8))
+ || (fdt_off_dt_struct(fdt) <
+ (fdt_off_mem_rsvmap(fdt) + mem_rsv_size))
+ || (fdt_off_dt_strings(fdt) <
+ (fdt_off_dt_struct(fdt) + struct_size))
+ || (fdt_totalsize(fdt) <
+ (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt)));
+}
+
+static int fdt_rw_probe_(void *fdt)
+{
+ FDT_RO_PROBE(fdt);
+
+ if (fdt_version(fdt) < 17)
+ return -FDT_ERR_BADVERSION;
+ if (fdt_blocks_misordered_(fdt, sizeof(struct fdt_reserve_entry),
+ fdt_size_dt_struct(fdt)))
+ return -FDT_ERR_BADLAYOUT;
+ if (fdt_version(fdt) > 17)
+ fdt_set_version(fdt, 17);
+
+ return 0;
+}
+
+#define FDT_RW_PROBE(fdt) \
+ { \
+ int err_; \
+ if ((err_ = fdt_rw_probe_(fdt)) != 0) \
+ return err_; \
+ }
+
+static inline int fdt_data_size_(void *fdt)
+{
+ return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
+}
+
+static int fdt_splice_(void *fdt, void *splicepoint, int oldlen, int newlen)
+{
+ char *p = splicepoint;
+ char *end = (char *)fdt + fdt_data_size_(fdt);
+
+ if (((p + oldlen) < p) || ((p + oldlen) > end))
+ return -FDT_ERR_BADOFFSET;
+ if ((p < (char *)fdt) || ((end - oldlen + newlen) < (char *)fdt))
+ return -FDT_ERR_BADOFFSET;
+ if ((end - oldlen + newlen) > ((char *)fdt + fdt_totalsize(fdt)))
+ return -FDT_ERR_NOSPACE;
+ memmove(p + newlen, p + oldlen, end - p - oldlen);
+ return 0;
+}
+
+static int fdt_splice_mem_rsv_(void *fdt, struct fdt_reserve_entry *p,
+ int oldn, int newn)
+{
+ int delta = (newn - oldn) * sizeof(*p);
+ int err;
+ err = fdt_splice_(fdt, p, oldn * sizeof(*p), newn * sizeof(*p));
+ if (err)
+ return err;
+ fdt_set_off_dt_struct(fdt, fdt_off_dt_struct(fdt) + delta);
+ fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta);
+ return 0;
+}
+
+static int fdt_splice_struct_(void *fdt, void *p,
+ int oldlen, int newlen)
+{
+ int delta = newlen - oldlen;
+ int err;
+
+ if ((err = fdt_splice_(fdt, p, oldlen, newlen)))
+ return err;
+
+ fdt_set_size_dt_struct(fdt, fdt_size_dt_struct(fdt) + delta);
+ fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta);
+ return 0;
+}
+
+static int fdt_splice_string_(void *fdt, int newlen)
+{
+ void *p = (char *)fdt
+ + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
+ int err;
+
+ if ((err = fdt_splice_(fdt, p, 0, newlen)))
+ return err;
+
+ fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) + newlen);
+ return 0;
+}
+
+static int fdt_find_add_string_(void *fdt, const char *s)
+{
+ char *strtab = (char *)fdt + fdt_off_dt_strings(fdt);
+ const char *p;
+ char *new;
+ int len = strlen(s) + 1;
+ int err;
+
+ p = fdt_find_string_(strtab, fdt_size_dt_strings(fdt), s);
+ if (p)
+ /* found it */
+ return (p - strtab);
+
+ new = strtab + fdt_size_dt_strings(fdt);
+ err = fdt_splice_string_(fdt, len);
+ if (err)
+ return err;
+
+ memcpy(new, s, len);
+ return (new - strtab);
+}
+
+int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size)
+{
+ struct fdt_reserve_entry *re;
+ int err;
+
+ FDT_RW_PROBE(fdt);
+
+ re = fdt_mem_rsv_w_(fdt, fdt_num_mem_rsv(fdt));
+ err = fdt_splice_mem_rsv_(fdt, re, 0, 1);
+ if (err)
+ return err;
+
+ re->address = cpu_to_fdt64(address);
+ re->size = cpu_to_fdt64(size);
+ return 0;
+}
+
+int fdt_del_mem_rsv(void *fdt, int n)
+{
+ struct fdt_reserve_entry *re = fdt_mem_rsv_w_(fdt, n);
+
+ FDT_RW_PROBE(fdt);
+
+ if (n >= fdt_num_mem_rsv(fdt))
+ return -FDT_ERR_NOTFOUND;
+
+ return fdt_splice_mem_rsv_(fdt, re, 1, 0);
+}
+
+static int fdt_resize_property_(void *fdt, int nodeoffset, const char *name,
+ int len, struct fdt_property **prop)
+{
+ int oldlen;
+ int err;
+
+ *prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen);
+ if (!*prop)
+ return oldlen;
+
+ if ((err = fdt_splice_struct_(fdt, (*prop)->data, FDT_TAGALIGN(oldlen),
+ FDT_TAGALIGN(len))))
+ return err;
+
+ (*prop)->len = cpu_to_fdt32(len);
+ return 0;
+}
+
+static int fdt_add_property_(void *fdt, int nodeoffset, const char *name,
+ int len, struct fdt_property **prop)
+{
+ int proplen;
+ int nextoffset;
+ int namestroff;
+ int err;
+
+ if ((nextoffset = fdt_check_node_offset_(fdt, nodeoffset)) < 0)
+ return nextoffset;
+
+ namestroff = fdt_find_add_string_(fdt, name);
+ if (namestroff < 0)
+ return namestroff;
+
+ *prop = fdt_offset_ptr_w_(fdt, nextoffset);
+ proplen = sizeof(**prop) + FDT_TAGALIGN(len);
+
+ err = fdt_splice_struct_(fdt, *prop, 0, proplen);
+ if (err)
+ return err;
+
+ (*prop)->tag = cpu_to_fdt32(FDT_PROP);
+ (*prop)->nameoff = cpu_to_fdt32(namestroff);
+ (*prop)->len = cpu_to_fdt32(len);
+ return 0;
+}
+
+int fdt_set_name(void *fdt, int nodeoffset, const char *name)
+{
+ char *namep;
+ int oldlen, newlen;
+ int err;
+
+ FDT_RW_PROBE(fdt);
+
+ namep = (char *)(uintptr_t)fdt_get_name(fdt, nodeoffset, &oldlen);
+ if (!namep)
+ return oldlen;
+
+ newlen = strlen(name);
+
+ err = fdt_splice_struct_(fdt, namep, FDT_TAGALIGN(oldlen+1),
+ FDT_TAGALIGN(newlen+1));
+ if (err)
+ return err;
+
+ memcpy(namep, name, newlen+1);
+ return 0;
+}
+
+int fdt_setprop_placeholder(void *fdt, int nodeoffset, const char *name,
+ int len, void **prop_data)
+{
+ struct fdt_property *prop;
+ int err;
+
+ FDT_RW_PROBE(fdt);
+
+ err = fdt_resize_property_(fdt, nodeoffset, name, len, &prop);
+ if (err == -FDT_ERR_NOTFOUND)
+ err = fdt_add_property_(fdt, nodeoffset, name, len, &prop);
+ if (err)
+ return err;
+
+ *prop_data = prop->data;
+ return 0;
+}
+
+int fdt_setprop(void *fdt, int nodeoffset, const char *name,
+ const void *val, int len)
+{
+ void *prop_data;
+ int err;
+
+ err = fdt_setprop_placeholder(fdt, nodeoffset, name, len, &prop_data);
+ if (err)
+ return err;
+
+ if (len)
+ memcpy(prop_data, val, len);
+ return 0;
+}
+
+int fdt_appendprop(void *fdt, int nodeoffset, const char *name,
+ const void *val, int len)
+{
+ struct fdt_property *prop;
+ int err, oldlen, newlen;
+
+ FDT_RW_PROBE(fdt);
+
+ prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen);
+ if (prop) {
+ newlen = len + oldlen;
+ err = fdt_splice_struct_(fdt, prop->data,
+ FDT_TAGALIGN(oldlen),
+ FDT_TAGALIGN(newlen));
+ if (err)
+ return err;
+ prop->len = cpu_to_fdt32(newlen);
+ memcpy(prop->data + oldlen, val, len);
+ } else {
+ err = fdt_add_property_(fdt, nodeoffset, name, len, &prop);
+ if (err)
+ return err;
+ memcpy(prop->data, val, len);
+ }
+ return 0;
+}
+
+int fdt_delprop(void *fdt, int nodeoffset, const char *name)
+{
+ struct fdt_property *prop;
+ int len, proplen;
+
+ FDT_RW_PROBE(fdt);
+
+ prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
+ if (!prop)
+ return len;
+
+ proplen = sizeof(*prop) + FDT_TAGALIGN(len);
+ return fdt_splice_struct_(fdt, prop, proplen, 0);
+}
+
+int fdt_add_subnode_namelen(void *fdt, int parentoffset,
+ const char *name, int namelen)
+{
+ struct fdt_node_header *nh;
+ int offset, nextoffset;
+ int nodelen;
+ int err;
+ uint32_t tag;
+ fdt32_t *endtag;
+
+ FDT_RW_PROBE(fdt);
+
+ offset = fdt_subnode_offset_namelen(fdt, parentoffset, name, namelen);
+ if (offset >= 0)
+ return -FDT_ERR_EXISTS;
+ else if (offset != -FDT_ERR_NOTFOUND)
+ return offset;
+
+ /* Try to place the new node after the parent's properties */
+ fdt_next_tag(fdt, parentoffset, &nextoffset); /* skip the BEGIN_NODE */
+ do {
+ offset = nextoffset;
+ tag = fdt_next_tag(fdt, offset, &nextoffset);
+ } while ((tag == FDT_PROP) || (tag == FDT_NOP));
+
+ nh = fdt_offset_ptr_w_(fdt, offset);
+ nodelen = sizeof(*nh) + FDT_TAGALIGN(namelen+1) + FDT_TAGSIZE;
+
+ err = fdt_splice_struct_(fdt, nh, 0, nodelen);
+ if (err)
+ return err;
+
+ nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE);
+ memset(nh->name, 0, FDT_TAGALIGN(namelen+1));
+ memcpy(nh->name, name, namelen);
+ endtag = (fdt32_t *)((char *)nh + nodelen - FDT_TAGSIZE);
+ *endtag = cpu_to_fdt32(FDT_END_NODE);
+
+ return offset;
+}
+
+int fdt_add_subnode(void *fdt, int parentoffset, const char *name)
+{
+ return fdt_add_subnode_namelen(fdt, parentoffset, name, strlen(name));
+}
+
+int fdt_del_node(void *fdt, int nodeoffset)
+{
+ int endoffset;
+
+ FDT_RW_PROBE(fdt);
+
+ endoffset = fdt_node_end_offset_(fdt, nodeoffset);
+ if (endoffset < 0)
+ return endoffset;
+
+ return fdt_splice_struct_(fdt, fdt_offset_ptr_w_(fdt, nodeoffset),
+ endoffset - nodeoffset, 0);
+}
+
+static void fdt_packblocks_(const char *old, char *new,
+ int mem_rsv_size, int struct_size)
+{
+ int mem_rsv_off, struct_off, strings_off;
+
+ mem_rsv_off = FDT_ALIGN(sizeof(struct fdt_header), 8);
+ struct_off = mem_rsv_off + mem_rsv_size;
+ strings_off = struct_off + struct_size;
+
+ memmove(new + mem_rsv_off, old + fdt_off_mem_rsvmap(old), mem_rsv_size);
+ fdt_set_off_mem_rsvmap(new, mem_rsv_off);
+
+ memmove(new + struct_off, old + fdt_off_dt_struct(old), struct_size);
+ fdt_set_off_dt_struct(new, struct_off);
+ fdt_set_size_dt_struct(new, struct_size);
+
+ memmove(new + strings_off, old + fdt_off_dt_strings(old),
+ fdt_size_dt_strings(old));
+ fdt_set_off_dt_strings(new, strings_off);
+ fdt_set_size_dt_strings(new, fdt_size_dt_strings(old));
+}
+
+int fdt_open_into(const void *fdt, void *buf, int bufsize)
+{
+ int err;
+ int mem_rsv_size, struct_size;
+ int newsize;
+ const char *fdtstart = fdt;
+ const char *fdtend = fdtstart + fdt_totalsize(fdt);
+ char *tmp;
+
+ FDT_RO_PROBE(fdt);
+
+ mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
+ * sizeof(struct fdt_reserve_entry);
+
+ if (fdt_version(fdt) >= 17) {
+ struct_size = fdt_size_dt_struct(fdt);
+ } else {
+ struct_size = 0;
+ while (fdt_next_tag(fdt, struct_size, &struct_size) != FDT_END)
+ ;
+ if (struct_size < 0)
+ return struct_size;
+ }
+
+ if (!fdt_blocks_misordered_(fdt, mem_rsv_size, struct_size)) {
+ /* no further work necessary */
+ err = fdt_move(fdt, buf, bufsize);
+ if (err)
+ return err;
+ fdt_set_version(buf, 17);
+ fdt_set_size_dt_struct(buf, struct_size);
+ fdt_set_totalsize(buf, bufsize);
+ return 0;
+ }
+
+ /* Need to reorder */
+ newsize = FDT_ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size
+ + struct_size + fdt_size_dt_strings(fdt);
+
+ if (bufsize < newsize)
+ return -FDT_ERR_NOSPACE;
+
+ /* First attempt to build converted tree at beginning of buffer */
+ tmp = buf;
+ /* But if that overlaps with the old tree... */
+ if (((tmp + newsize) > fdtstart) && (tmp < fdtend)) {
+ /* Try right after the old tree instead */
+ tmp = (char *)(uintptr_t)fdtend;
+ if ((tmp + newsize) > ((char *)buf + bufsize))
+ return -FDT_ERR_NOSPACE;
+ }
+
+ fdt_packblocks_(fdt, tmp, mem_rsv_size, struct_size);
+ memmove(buf, tmp, newsize);
+
+ fdt_set_magic(buf, FDT_MAGIC);
+ fdt_set_totalsize(buf, bufsize);
+ fdt_set_version(buf, 17);
+ fdt_set_last_comp_version(buf, 16);
+ fdt_set_boot_cpuid_phys(buf, fdt_boot_cpuid_phys(fdt));
+
+ return 0;
+}
+
+int fdt_pack(void *fdt)
+{
+ int mem_rsv_size;
+
+ FDT_RW_PROBE(fdt);
+
+ mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
+ * sizeof(struct fdt_reserve_entry);
+ fdt_packblocks_(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt));
+ fdt_set_totalsize(fdt, fdt_data_size_(fdt));
+
+ return 0;
+}
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+struct fdt_errtabent {
+ const char *str;
+};
+
+#define FDT_ERRTABENT(val) \
+ [(val)] = { .str = #val, }
+
+static struct fdt_errtabent fdt_errtable[] = {
+ FDT_ERRTABENT(FDT_ERR_NOTFOUND),
+ FDT_ERRTABENT(FDT_ERR_EXISTS),
+ FDT_ERRTABENT(FDT_ERR_NOSPACE),
+
+ FDT_ERRTABENT(FDT_ERR_BADOFFSET),
+ FDT_ERRTABENT(FDT_ERR_BADPATH),
+ FDT_ERRTABENT(FDT_ERR_BADPHANDLE),
+ FDT_ERRTABENT(FDT_ERR_BADSTATE),
+
+ FDT_ERRTABENT(FDT_ERR_TRUNCATED),
+ FDT_ERRTABENT(FDT_ERR_BADMAGIC),
+ FDT_ERRTABENT(FDT_ERR_BADVERSION),
+ FDT_ERRTABENT(FDT_ERR_BADSTRUCTURE),
+ FDT_ERRTABENT(FDT_ERR_BADLAYOUT),
+ FDT_ERRTABENT(FDT_ERR_INTERNAL),
+ FDT_ERRTABENT(FDT_ERR_BADNCELLS),
+ FDT_ERRTABENT(FDT_ERR_BADVALUE),
+ FDT_ERRTABENT(FDT_ERR_BADOVERLAY),
+ FDT_ERRTABENT(FDT_ERR_NOPHANDLES),
+};
+#define FDT_ERRTABSIZE (sizeof(fdt_errtable) / sizeof(fdt_errtable[0]))
+
+const char *fdt_strerror(int errval)
+{
+ if (errval > 0)
+ return "<valid offset/length>";
+ else if (errval == 0)
+ return "<no error>";
+ else if (errval > -FDT_ERRTABSIZE) {
+ const char *s = fdt_errtable[-errval].str;
+
+ if (s)
+ return s;
+ }
+
+ return "<unknown error>";
+}
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+static int fdt_sw_probe_(void *fdt)
+{
+ if (fdt_magic(fdt) == FDT_MAGIC)
+ return -FDT_ERR_BADSTATE;
+ else if (fdt_magic(fdt) != FDT_SW_MAGIC)
+ return -FDT_ERR_BADMAGIC;
+ return 0;
+}
+
+#define FDT_SW_PROBE(fdt) \
+ { \
+ int err; \
+ if ((err = fdt_sw_probe_(fdt)) != 0) \
+ return err; \
+ }
+
+/* 'memrsv' state: Initial state after fdt_create()
+ *
+ * Allowed functions:
+ * fdt_add_reservmap_entry()
+ * fdt_finish_reservemap() [moves to 'struct' state]
+ */
+static int fdt_sw_probe_memrsv_(void *fdt)
+{
+ int err = fdt_sw_probe_(fdt);
+ if (err)
+ return err;
+
+ if (fdt_off_dt_strings(fdt) != 0)
+ return -FDT_ERR_BADSTATE;
+ return 0;
+}
+
+#define FDT_SW_PROBE_MEMRSV(fdt) \
+ { \
+ int err; \
+ if ((err = fdt_sw_probe_memrsv_(fdt)) != 0) \
+ return err; \
+ }
+
+/* 'struct' state: Enter this state after fdt_finish_reservemap()
+ *
+ * Allowed functions:
+ * fdt_begin_node()
+ * fdt_end_node()
+ * fdt_property*()
+ * fdt_finish() [moves to 'complete' state]
+ */
+static int fdt_sw_probe_struct_(void *fdt)
+{
+ int err = fdt_sw_probe_(fdt);
+ if (err)
+ return err;
+
+ if (fdt_off_dt_strings(fdt) != fdt_totalsize(fdt))
+ return -FDT_ERR_BADSTATE;
+ return 0;
+}
+
+#define FDT_SW_PROBE_STRUCT(fdt) \
+ { \
+ int err; \
+ if ((err = fdt_sw_probe_struct_(fdt)) != 0) \
+ return err; \
+ }
+
+/* 'complete' state: Enter this state after fdt_finish()
+ *
+ * Allowed functions: none
+ */
+
+static void *fdt_grab_space_(void *fdt, size_t len)
+{
+ int offset = fdt_size_dt_struct(fdt);
+ int spaceleft;
+
+ spaceleft = fdt_totalsize(fdt) - fdt_off_dt_struct(fdt)
+ - fdt_size_dt_strings(fdt);
+
+ if ((offset + len < offset) || (offset + len > spaceleft))
+ return NULL;
+
+ fdt_set_size_dt_struct(fdt, offset + len);
+ return fdt_offset_ptr_w_(fdt, offset);
+}
+
+int fdt_create(void *buf, int bufsize)
+{
+ const size_t hdrsize = FDT_ALIGN(sizeof(struct fdt_header),
+ sizeof(struct fdt_reserve_entry));
+ void *fdt = buf;
+
+ if (bufsize < hdrsize)
+ return -FDT_ERR_NOSPACE;
+
+ memset(buf, 0, bufsize);
+
+ fdt_set_magic(fdt, FDT_SW_MAGIC);
+ fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION);
+ fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION);
+ fdt_set_totalsize(fdt, bufsize);
+
+ fdt_set_off_mem_rsvmap(fdt, hdrsize);
+ fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt));
+ fdt_set_off_dt_strings(fdt, 0);
+
+ return 0;
+}
+
+int fdt_resize(void *fdt, void *buf, int bufsize)
+{
+ size_t headsize, tailsize;
+ char *oldtail, *newtail;
+
+ FDT_SW_PROBE(fdt);
+
+ headsize = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt);
+ tailsize = fdt_size_dt_strings(fdt);
+
+ if ((headsize + tailsize) > fdt_totalsize(fdt))
+ return -FDT_ERR_INTERNAL;
+
+ if ((headsize + tailsize) > bufsize)
+ return -FDT_ERR_NOSPACE;
+
+ oldtail = (char *)fdt + fdt_totalsize(fdt) - tailsize;
+ newtail = (char *)buf + bufsize - tailsize;
+
+ /* Two cases to avoid clobbering data if the old and new
+ * buffers partially overlap */
+ if (buf <= fdt) {
+ memmove(buf, fdt, headsize);
+ memmove(newtail, oldtail, tailsize);
+ } else {
+ memmove(newtail, oldtail, tailsize);
+ memmove(buf, fdt, headsize);
+ }
+
+ fdt_set_totalsize(buf, bufsize);
+ if (fdt_off_dt_strings(buf))
+ fdt_set_off_dt_strings(buf, bufsize);
+
+ return 0;
+}
+
+int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size)
+{
+ struct fdt_reserve_entry *re;
+ int offset;
+
+ FDT_SW_PROBE_MEMRSV(fdt);
+
+ offset = fdt_off_dt_struct(fdt);
+ if ((offset + sizeof(*re)) > fdt_totalsize(fdt))
+ return -FDT_ERR_NOSPACE;
+
+ re = (struct fdt_reserve_entry *)((char *)fdt + offset);
+ re->address = cpu_to_fdt64(addr);
+ re->size = cpu_to_fdt64(size);
+
+ fdt_set_off_dt_struct(fdt, offset + sizeof(*re));
+
+ return 0;
+}
+
+int fdt_finish_reservemap(void *fdt)
+{
+ int err = fdt_add_reservemap_entry(fdt, 0, 0);
+
+ if (err)
+ return err;
+
+ fdt_set_off_dt_strings(fdt, fdt_totalsize(fdt));
+ return 0;
+}
+
+int fdt_begin_node(void *fdt, const char *name)
+{
+ struct fdt_node_header *nh;
+ int namelen;
+
+ FDT_SW_PROBE_STRUCT(fdt);
+
+ namelen = strlen(name) + 1;
+ nh = fdt_grab_space_(fdt, sizeof(*nh) + FDT_TAGALIGN(namelen));
+ if (! nh)
+ return -FDT_ERR_NOSPACE;
+
+ nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE);
+ memcpy(nh->name, name, namelen);
+ return 0;
+}
+
+int fdt_end_node(void *fdt)
+{
+ fdt32_t *en;
+
+ FDT_SW_PROBE_STRUCT(fdt);
+
+ en = fdt_grab_space_(fdt, FDT_TAGSIZE);
+ if (! en)
+ return -FDT_ERR_NOSPACE;
+
+ *en = cpu_to_fdt32(FDT_END_NODE);
+ return 0;
+}
+
+static int fdt_find_add_string_(void *fdt, const char *s)
+{
+ char *strtab = (char *)fdt + fdt_totalsize(fdt);
+ const char *p;
+ int strtabsize = fdt_size_dt_strings(fdt);
+ int len = strlen(s) + 1;
+ int struct_top, offset;
+
+ p = fdt_find_string_(strtab - strtabsize, strtabsize, s);
+ if (p)
+ return p - strtab;
+
+ /* Add it */
+ offset = -strtabsize - len;
+ struct_top = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt);
+ if (fdt_totalsize(fdt) + offset < struct_top)
+ return 0; /* no more room :( */
+
+ memcpy(strtab + offset, s, len);
+ fdt_set_size_dt_strings(fdt, strtabsize + len);
+ return offset;
+}
+
+int fdt_property_placeholder(void *fdt, const char *name, int len, void **valp)
+{
+ struct fdt_property *prop;
+ int nameoff;
+
+ FDT_SW_PROBE_STRUCT(fdt);
+
+ nameoff = fdt_find_add_string_(fdt, name);
+ if (nameoff == 0)
+ return -FDT_ERR_NOSPACE;
+
+ prop = fdt_grab_space_(fdt, sizeof(*prop) + FDT_TAGALIGN(len));
+ if (! prop)
+ return -FDT_ERR_NOSPACE;
+
+ prop->tag = cpu_to_fdt32(FDT_PROP);
+ prop->nameoff = cpu_to_fdt32(nameoff);
+ prop->len = cpu_to_fdt32(len);
+ *valp = prop->data;
+ return 0;
+}
+
+int fdt_property(void *fdt, const char *name, const void *val, int len)
+{
+ void *ptr;
+ int ret;
+
+ ret = fdt_property_placeholder(fdt, name, len, &ptr);
+ if (ret)
+ return ret;
+ memcpy(ptr, val, len);
+ return 0;
+}
+
+int fdt_finish(void *fdt)
+{
+ char *p = (char *)fdt;
+ fdt32_t *end;
+ int oldstroffset, newstroffset;
+ uint32_t tag;
+ int offset, nextoffset;
+
+ FDT_SW_PROBE_STRUCT(fdt);
+
+ /* Add terminator */
+ end = fdt_grab_space_(fdt, sizeof(*end));
+ if (! end)
+ return -FDT_ERR_NOSPACE;
+ *end = cpu_to_fdt32(FDT_END);
+
+ /* Relocate the string table */
+ oldstroffset = fdt_totalsize(fdt) - fdt_size_dt_strings(fdt);
+ newstroffset = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt);
+ memmove(p + newstroffset, p + oldstroffset, fdt_size_dt_strings(fdt));
+ fdt_set_off_dt_strings(fdt, newstroffset);
+
+ /* Walk the structure, correcting string offsets */
+ offset = 0;
+ while ((tag = fdt_next_tag(fdt, offset, &nextoffset)) != FDT_END) {
+ if (tag == FDT_PROP) {
+ struct fdt_property *prop =
+ fdt_offset_ptr_w_(fdt, offset);
+ int nameoff;
+
+ nameoff = fdt32_to_cpu(prop->nameoff);
+ nameoff += fdt_size_dt_strings(fdt);
+ prop->nameoff = cpu_to_fdt32(nameoff);
+ }
+ offset = nextoffset;
+ }
+ if (nextoffset < 0)
+ return nextoffset;
+
+ /* Finally, adjust the header */
+ fdt_set_totalsize(fdt, newstroffset + fdt_size_dt_strings(fdt));
+ fdt_set_magic(fdt, FDT_MAGIC);
+ return 0;
+}
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+int fdt_setprop_inplace_namelen_partial(void *fdt, int nodeoffset,
+ const char *name, int namelen,
+ uint32_t idx, const void *val,
+ int len)
+{
+ void *propval;
+ int proplen;
+
+ propval = fdt_getprop_namelen_w(fdt, nodeoffset, name, namelen,
+ &proplen);
+ if (!propval)
+ return proplen;
+
+ if (proplen < (len + idx))
+ return -FDT_ERR_NOSPACE;
+
+ memcpy((char *)propval + idx, val, len);
+ return 0;
+}
+
+int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
+ const void *val, int len)
+{
+ const void *propval;
+ int proplen;
+
+ propval = fdt_getprop(fdt, nodeoffset, name, &proplen);
+ if (!propval)
+ return proplen;
+
+ if (proplen != len)
+ return -FDT_ERR_NOSPACE;
+
+ return fdt_setprop_inplace_namelen_partial(fdt, nodeoffset, name,
+ strlen(name), 0,
+ val, len);
+}
+
+static void fdt_nop_region_(void *start, int len)
+{
+ fdt32_t *p;
+
+ for (p = start; (char *)p < ((char *)start + len); p++)
+ *p = cpu_to_fdt32(FDT_NOP);
+}
+
+int fdt_nop_property(void *fdt, int nodeoffset, const char *name)
+{
+ struct fdt_property *prop;
+ int len;
+
+ prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
+ if (!prop)
+ return len;
+
+ fdt_nop_region_(prop, len + sizeof(*prop));
+
+ return 0;
+}
+
+int fdt_node_end_offset_(void *fdt, int offset)
+{
+ int depth = 0;
+
+ while ((offset >= 0) && (depth >= 0))
+ offset = fdt_next_node(fdt, offset, &depth);
+
+ return offset;
+}
+
+int fdt_nop_node(void *fdt, int nodeoffset)
+{
+ int endoffset;
+
+ endoffset = fdt_node_end_offset_(fdt, nodeoffset);
+ if (endoffset < 0)
+ return endoffset;
+
+ fdt_nop_region_(fdt_offset_ptr_w(fdt, nodeoffset, 0),
+ endoffset - nodeoffset);
+ return 0;
+}
--- /dev/null
+#ifndef LIBFDT_INTERNAL_H
+#define LIBFDT_INTERNAL_H
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <fdt.h>
+
+#define FDT_ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1))
+#define FDT_TAGALIGN(x) (FDT_ALIGN((x), FDT_TAGSIZE))
+
+int fdt_ro_probe_(const void *fdt);
+#define FDT_RO_PROBE(fdt) \
+ { \
+ int err_; \
+ if ((err_ = fdt_ro_probe_(fdt)) != 0) \
+ return err_; \
+ }
+
+int fdt_check_node_offset_(const void *fdt, int offset);
+int fdt_check_prop_offset_(const void *fdt, int offset);
+const char *fdt_find_string_(const char *strtab, int tabsize, const char *s);
+int fdt_node_end_offset_(void *fdt, int nodeoffset);
+
+static inline const void *fdt_offset_ptr_(const void *fdt, int offset)
+{
+ return (const char *)fdt + fdt_off_dt_struct(fdt) + offset;
+}
+
+static inline void *fdt_offset_ptr_w_(void *fdt, int offset)
+{
+ return (void *)(uintptr_t)fdt_offset_ptr_(fdt, offset);
+}
+
+static inline const struct fdt_reserve_entry *fdt_mem_rsv_(const void *fdt, int n)
+{
+ const struct fdt_reserve_entry *rsv_table =
+ (const struct fdt_reserve_entry *)
+ ((const char *)fdt + fdt_off_mem_rsvmap(fdt));
+
+ return rsv_table + n;
+}
+static inline struct fdt_reserve_entry *fdt_mem_rsv_w_(void *fdt, int n)
+{
+ return (void *)(uintptr_t)fdt_mem_rsv_(fdt, n);
+}
+
+#define FDT_SW_MAGIC (~FDT_MAGIC)
+
+#endif /* LIBFDT_INTERNAL_H */
projects / project / bcm63xx / atf.git / commitdiff