deletes config-5.15 and patches-5.15/.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+++ /dev/null
-# CONFIG_40x is not set
-CONFIG_44x=y
-CONFIG_4xx=y
-CONFIG_4xx_SOC=y
-# CONFIG_ADVANCED_OPTIONS is not set
-CONFIG_APM821xx=y
-# CONFIG_APOLLO3G is not set
-# CONFIG_ARCHES is not set
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS=11
-CONFIG_ARCH_MMAP_RND_BITS_MAX=17
-CONFIG_ARCH_MMAP_RND_BITS_MIN=11
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
-CONFIG_AUDIT_ARCH=y
-# CONFIG_BAMBOO is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLUESTONE=y
-CONFIG_BOOKE=y
-CONFIG_BOOKE_WDT=y
-# CONFIG_CANYONLANDS is not set
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs noinitrd"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_MD5_PPC is not set
-# CONFIG_CRYPTO_SHA1_PPC is not set
-CONFIG_DATA_SHIFT=12
-CONFIG_DMADEVICES=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DTC=y
-CONFIG_DW_DMAC=y
-CONFIG_DW_DMAC_CORE=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EBONY is not set
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-# CONFIG_EIGER is not set
-CONFIG_EXTRA_TARGETS="uImage"
-CONFIG_FIXED_PHY=y
-CONFIG_FORCE_PCI=y
-# CONFIG_FSL_LBC is not set
-CONFIG_FWNODE_MDIO=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_GLACIER is not set
-CONFIG_GPIO_CDEV=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IBM_IIC=y
-CONFIG_IBM_EMAC=y
-CONFIG_IBM_EMAC_EMAC4=y
-CONFIG_IBM_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_EMAC_RGMII=y
-CONFIG_IBM_EMAC_RXB=128
-CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_EMAC_TAH=y
-CONFIG_IBM_EMAC_TXB=128
-# CONFIG_ICON is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_ISA_DMA_API=y
-# CONFIG_JFFS2_FS is not set
-# CONFIG_KATMAI is not set
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_LEDS_TRIGGER_MTD=y
-CONFIG_LEDS_TRIGGER_PATTERN=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MMU_GATHER_PAGE_SIZE=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_SELFTESTS=y
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=1
-CONFIG_NR_IRQS=512
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND=y
-CONFIG_PACKING=y
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_ARCH_FALLBACKS=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYS_64BIT=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-# CONFIG_PMU_SYSFS is not set
-# CONFIG_POWERPC_CPU is not set
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_PPC44x_SIMPLE=y
-CONFIG_PPC4xx_GPIO=y
-CONFIG_PPC4xx_MSI=y
-CONFIG_PPC4xx_PCI_EXPRESS=y
-# CONFIG_PPC64 is not set
-# CONFIG_PPC_47x is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y
-CONFIG_PPC_ADV_DEBUG_DVCS=2
-CONFIG_PPC_ADV_DEBUG_IACS=4
-CONFIG_PPC_ADV_DEBUG_REGS=y
-# CONFIG_PPC_BOOK3S_32 is not set
-CONFIG_PPC_DCR=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_EARLY_DEBUG is not set
-CONFIG_PPC_FPU=y
-CONFIG_PPC_FPU_REGS=y
-CONFIG_PPC_HAVE_KUEP=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PPC_KUEP=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MSI_BITMAP=y
-CONFIG_PPC_PAGE_SHIFT=12
-CONFIG_PPC_UDBG_16550=y
-CONFIG_PPC_WERROR=y
-CONFIG_PTE_64BIT=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-# CONFIG_RAINIER is not set
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_REGULATOR=y
-CONFIG_RSEQ=y
-# CONFIG_SAM440EP is not set
-# CONFIG_SCOM_DEBUGFS is not set
-# CONFIG_SEQUOIA is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-# CONFIG_TAISHAN is not set
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_THREAD_SHIFT=13
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_TOOLCHAIN_DEFAULT_CPU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VDSO32=y
-# CONFIG_VIRTIO_MENU is not set
-# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
-# CONFIG_WARP is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_POWERPC=y
-# CONFIG_YOSEMITE is not set
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
+++ /dev/null
-From 4d49367c5303e3ebd17502a45b74de280f6be539 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 13 Feb 2022 01:47:33 +0100
-Subject: hwmon: (tc654) Add thermal_cooling device support
-
-Adds thermal_cooling device support to the tc654/tc655
-driver. This make it possible to integrate it into a
-device-tree supported thermal-zone node as a
-cooling device.
-
-I have been using this patch as part of the Netgear WNDR4700
-Centria NAS Router support within OpenWrt since 2016.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Link: https://lore.kernel.org/r/20220213004733.2421193-1-chunkeey@gmail.com
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
----
---- a/drivers/hwmon/tc654.c
-+++ b/drivers/hwmon/tc654.c
-@@ -15,6 +15,7 @@
- #include <linux/module.h>
- #include <linux/mutex.h>
- #include <linux/slab.h>
-+#include <linux/thermal.h>
- #include <linux/util_macros.h>
-
- enum tc654_regs {
-@@ -379,28 +380,20 @@ static ssize_t pwm_show(struct device *d
- return sprintf(buf, "%d\n", pwm);
- }
-
--static ssize_t pwm_store(struct device *dev, struct device_attribute *da,
-- const char *buf, size_t count)
-+static int _set_pwm(struct tc654_data *data, unsigned long val)
- {
-- struct tc654_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
-- unsigned long val;
- int ret;
-
-- if (kstrtoul(buf, 10, &val))
-- return -EINVAL;
-- if (val > 255)
-- return -EINVAL;
--
- mutex_lock(&data->update_lock);
-
-- if (val == 0)
-+ if (val == 0) {
- data->config |= TC654_REG_CONFIG_SDM;
-- else
-+ data->duty_cycle = 0;
-+ } else {
- data->config &= ~TC654_REG_CONFIG_SDM;
--
-- data->duty_cycle = find_closest(val, tc654_pwm_map,
-- ARRAY_SIZE(tc654_pwm_map));
-+ data->duty_cycle = val - 1;
-+ }
-
- ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config);
- if (ret < 0)
-@@ -411,6 +404,24 @@ static ssize_t pwm_store(struct device *
-
- out:
- mutex_unlock(&data->update_lock);
-+ return ret;
-+}
-+
-+static ssize_t pwm_store(struct device *dev, struct device_attribute *da,
-+ const char *buf, size_t count)
-+{
-+ struct tc654_data *data = dev_get_drvdata(dev);
-+ unsigned long val;
-+ int ret;
-+
-+ if (kstrtoul(buf, 10, &val))
-+ return -EINVAL;
-+ if (val > 255)
-+ return -EINVAL;
-+ if (val > 0)
-+ val = find_closest(val, tc654_pwm_map, ARRAY_SIZE(tc654_pwm_map)) + 1;
-+
-+ ret = _set_pwm(data, val);
- return ret < 0 ? ret : count;
- }
-
-@@ -443,6 +454,58 @@ static struct attribute *tc654_attrs[] =
- ATTRIBUTE_GROUPS(tc654);
-
- /*
-+ * thermal cooling device functions
-+ *
-+ * Account for the "ShutDown Mode (SDM)" state by offsetting
-+ * the 16 PWM duty cycle states by 1.
-+ *
-+ * State 0 = 0% PWM | Shutdown - Fan(s) are off
-+ * State 1 = 30% PWM | duty_cycle = 0
-+ * State 2 = ~35% PWM | duty_cycle = 1
-+ * [...]
-+ * State 15 = ~95% PWM | duty_cycle = 14
-+ * State 16 = 100% PWM | duty_cycle = 15
-+ */
-+#define TC654_MAX_COOLING_STATE 16
-+
-+static int tc654_get_max_state(struct thermal_cooling_device *cdev, unsigned long *state)
-+{
-+ *state = TC654_MAX_COOLING_STATE;
-+ return 0;
-+}
-+
-+static int tc654_get_cur_state(struct thermal_cooling_device *cdev, unsigned long *state)
-+{
-+ struct tc654_data *data = tc654_update_client(cdev->devdata);
-+
-+ if (IS_ERR(data))
-+ return PTR_ERR(data);
-+
-+ if (data->config & TC654_REG_CONFIG_SDM)
-+ *state = 0; /* FAN is off */
-+ else
-+ *state = data->duty_cycle + 1; /* offset PWM States by 1 */
-+
-+ return 0;
-+}
-+
-+static int tc654_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state)
-+{
-+ struct tc654_data *data = tc654_update_client(cdev->devdata);
-+
-+ if (IS_ERR(data))
-+ return PTR_ERR(data);
-+
-+ return _set_pwm(data, clamp_val(state, 0, TC654_MAX_COOLING_STATE));
-+}
-+
-+static const struct thermal_cooling_device_ops tc654_fan_cool_ops = {
-+ .get_max_state = tc654_get_max_state,
-+ .get_cur_state = tc654_get_cur_state,
-+ .set_cur_state = tc654_set_cur_state,
-+};
-+
-+/*
- * device probe and removal
- */
-
-@@ -472,7 +535,18 @@ static int tc654_probe(struct i2c_client
- hwmon_dev =
- devm_hwmon_device_register_with_groups(dev, client->name, data,
- tc654_groups);
-- return PTR_ERR_OR_ZERO(hwmon_dev);
-+ if (IS_ERR(hwmon_dev))
-+ return PTR_ERR(hwmon_dev);
-+
-+ if (IS_ENABLED(CONFIG_THERMAL)) {
-+ struct thermal_cooling_device *cdev;
-+
-+ cdev = devm_thermal_of_cooling_device_register(dev, dev->of_node, client->name,
-+ hwmon_dev, &tc654_fan_cool_ops);
-+ return PTR_ERR_OR_ZERO(cdev);
-+ }
-+
-+ return 0;
- }
-
- static const struct i2c_device_id tc654_id[] = {
+++ /dev/null
---- a/arch/powerpc/platforms/44x/Kconfig
-+++ b/arch/powerpc/platforms/44x/Kconfig
-@@ -121,6 +121,17 @@ config CANYONLANDS
- help
- This option enables support for the AMCC PPC460EX evaluation board.
-
-+config APOLLO3G
-+ bool "Apollo3G"
-+ depends on 44x
-+ default n
-+ select PPC44x_SIMPLE
-+ select APM821xx
-+ select IBM_EMAC_RGMII
-+ select 460EX
-+ help
-+ This option enables support for the AMCC Apollo 3G board.
-+
- config GLACIER
- bool "Glacier"
- depends on 44x
---- a/arch/powerpc/platforms/44x/ppc44x_simple.c
-+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
-@@ -47,6 +47,7 @@ machine_device_initcall(ppc44x_simple, p
- * board.c file for it rather than adding it to this list.
- */
- static char *board[] __initdata = {
-+ "amcc,apollo3g",
- "amcc,arches",
- "amcc,bamboo",
- "apm,bluestone",
+++ /dev/null
---- a/arch/powerpc/platforms/4xx/pci.c
-+++ b/arch/powerpc/platforms/4xx/pci.c
-@@ -1060,15 +1060,24 @@ static int __init apm821xx_pciex_init_po
- u32 val;
-
- /*
-- * Do a software reset on PCIe ports.
-- * This code is to fix the issue that pci drivers doesn't re-assign
-- * bus number for PCIE devices after Uboot
-- * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
-- * PT quad port, SAS LSI 1064E)
-+ * Only reset the PHY when no link is currently established.
-+ * This is for the Atheros PCIe board which has problems to establish
-+ * the link (again) after this PHY reset. All other currently tested
-+ * PCIe boards don't show this problem.
- */
--
-- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
-- mdelay(10);
-+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
-+ if (!(val & 0x00001000)) {
-+ /*
-+ * Do a software reset on PCIe ports.
-+ * This code is to fix the issue that pci drivers doesn't re-assign
-+ * bus number for PCIE devices after Uboot
-+ * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
-+ * PT quad port, SAS LSI 1064E)
-+ */
-+
-+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
-+ mdelay(10);
-+ }
-
- if (port->endpoint)
- val = PTYPE_LEGACY_ENDPOINT << 20;
-@@ -1085,9 +1094,12 @@ static int __init apm821xx_pciex_init_po
- mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
- mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
-
-- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
-- mdelay(50);
-- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
-+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
-+ if (!(val & 0x00001000)) {
-+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
-+ mdelay(50);
-+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
-+ }
-
- mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
- mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
+++ /dev/null
---- a/arch/powerpc/platforms/4xx/pci.c
-+++ b/arch/powerpc/platforms/4xx/pci.c
-@@ -1902,9 +1902,9 @@ static void __init ppc4xx_configure_pcie
- * if it works
- */
- out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
-- out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
-+ out_le32(mbase + PECFG_PIM0LAH, 0x00000008);
- out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
-- out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
-+ out_le32(mbase + PECFG_PIM1LAH, 0x0000000c);
- out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
- out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
-
+++ /dev/null
-From c9395ad54e2cabb87d408becc37566f3d8248933 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 1 Dec 2019 02:08:23 +0100
-Subject: [PATCH] powerpc: bootwrapper: force gzip as mkimage's compression
- method
-
-Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to
-instruct the mkimage to use the xz compression, which isn't
-supported. This patch forces the gzip compression, which is
-supported and doesn't matter because the generated uImage for
-the apm821xx target gets ignored as the OpenWrt toolchain will
-do separate U-Boot kernel images for each device individually.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- arch/powerpc/boot/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -258,7 +258,7 @@ compressor-$(CONFIG_KERNEL_LZO) := lzo
-
- # args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd
- quiet_cmd_wrap = WRAP $@
-- cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \
-+ cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z gzip -c -o $@ -p $2 \
- $(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \
- vmlinux
-
projects / openwrt / staging / mans0n.git / commitdiff