#
-# Copyright (C) 2006-2008 OpenWrt.org
+# Copyright (C) 2006-2009 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
include $(TOPDIR)/rules.mk
PKG_NAME:=hostapd
-PKG_VERSION:=0.6.7
+PKG_VERSION:=0.6.8
PKG_RELEASE:=1
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=http://hostap.epitest.fi/releases/
PKG_SOURCE_SUBDIR:=hostapd-$(PKG_VERSION)
PKG_SOURCE_VERSION:=$(PKG_REV)
-PKG_MD5SUM:=0ce66cd5768235b5d2299f9efb9225d8
+PKG_MD5SUM:=4b183183e20af1386017e9f499184ee1
PKG_BUILD_DEPENDS:=PACKAGE_kmod-madwifi:madwifi PACKAGE_kmod-mac80211:mac80211 PACKAGE_kmod-mac80211:libnl
include $(INCLUDE_DIR)/package.mk
#endef
define Package/hostapd/description
- This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
+ This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
Authenticator.
endef
#endef
define Package/hostapd-mini/description
- This package contains a minimal IEEE 802.1x/WPA/EAP/RADIUS Authenticator
+ This package contains a minimal IEEE 802.1x/WPA/EAP/RADIUS Authenticator
(WPA-PSK only).
endef
endef
define Package/hostapd-utils/description
- This package contains a command line utility to control the
+ This package contains a command line utility to control the
IEEE 802.1x/WPA/EAP/RADIUS Authenticator.
endef
$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd.$(2)/hostapd/hostapd $$(1)/usr/sbin/
# config is managed through uci
# $(INSTALL_DIR) $$(1)/etc
-# $(INSTALL_CONF) $(PKG_BUILD_DIR)/hostapd.$(2)/hostapd/hostapd.conf $$(1)/etc/hostapd.conf
+# $(INSTALL_CONF) $(PKG_BUILD_DIR)/hostapd.$(2)/hostapd/hostapd.conf $$(1)/etc/hostapd.conf
endef
define Package/Template
+++ /dev/null
---- a/hostapd/driver_nl80211.c
-+++ b/hostapd/driver_nl80211.c
-@@ -27,6 +27,7 @@
- #include <net/if.h>
- #include <netpacket/packet.h>
- #include "wireless_copy.h"
-+#include <linux/filter.h>
- #include <net/if_arp.h>
-
- #include "hostapd.h"
-@@ -1728,6 +1729,9 @@ static void handle_frame(struct hostapd_
- case WLAN_FC_TODS:
- bssid = hdr->addr1;
- break;
-+ case WLAN_FC_FROMDS:
-+ bssid = hdr->addr2;
-+ break;
- default:
- /* discard */
- return;
-@@ -1908,6 +1912,150 @@ static void handle_monitor_read(int sock
- }
-
-
-+/*
-+ * we post-process the filter code later and rewrite
-+ * this to the offset to the last instruction
-+ */
-+#define PASS 0xFF
-+#define FAIL 0xFE
-+
-+static struct sock_filter msock_filter_insns[] = {
-+ /*
-+ * do a little-endian load of the radiotap length field
-+ */
-+ /* load lower byte into A */
-+ BPF_STMT(BPF_LD | BPF_B | BPF_ABS, 2),
-+ /* put it into X (== index register) */
-+ BPF_STMT(BPF_MISC| BPF_TAX, 0),
-+ /* load upper byte into A */
-+ BPF_STMT(BPF_LD | BPF_B | BPF_ABS, 3),
-+ /* left-shift it by 8 */
-+ BPF_STMT(BPF_ALU | BPF_LSH | BPF_K, 8),
-+ /* or with X */
-+ BPF_STMT(BPF_ALU | BPF_OR | BPF_X, 0),
-+ /* put result into X */
-+ BPF_STMT(BPF_MISC| BPF_TAX, 0),
-+
-+ /*
-+ * Allow management frames through, this also gives us those
-+ * management frames that we sent ourselves with status
-+ */
-+ /* load the lower byte of the IEEE 802.11 frame control field */
-+ BPF_STMT(BPF_LD | BPF_B | BPF_IND, 0),
-+ /* mask off frame type and version */
-+ BPF_STMT(BPF_ALU | BPF_AND | BPF_K, 0xF),
-+ /* accept frame if it's both 0, fall through otherwise */
-+ BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, 0, PASS, 0),
-+
-+ /*
-+ * TODO: add a bit to radiotap RX flags that indicates
-+ * that the sending station is not associated, then
-+ * add a filter here that filters on our DA and that flag
-+ * to allow us to deauth frames to that bad station.
-+ *
-+ * Not a regression -- we didn't do it before either.
-+ */
-+
-+#if 0
-+ /*
-+ * drop non-data frames, WDS frames
-+ */
-+ /* load the lower byte of the frame control field */
-+ BPF_STMT(BPF_LD | BPF_B | BPF_IND, 0),
-+ /* mask off QoS bit */
-+ BPF_STMT(BPF_ALU | BPF_AND | BPF_K, 0x0c),
-+ /* drop non-data frames */
-+ BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, 8, 0, FAIL),
-+ /* load the upper byte of the frame control field */
-+ BPF_STMT(BPF_LD | BPF_B | BPF_IND, 0),
-+ /* mask off toDS/fromDS */
-+ BPF_STMT(BPF_ALU | BPF_AND | BPF_K, 0x03),
-+ /* drop WDS frames */
-+ BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, 3, FAIL, 0),
-+#endif
-+
-+ /*
-+ * add header length to index
-+ */
-+ /* load the lower byte of the frame control field */
-+ BPF_STMT(BPF_LD | BPF_B | BPF_IND, 0),
-+ /* mask off QoS bit */
-+ BPF_STMT(BPF_ALU | BPF_AND | BPF_K, 0x80),
-+ /* right shift it by 6 to give 0 or 2 */
-+ BPF_STMT(BPF_ALU | BPF_RSH | BPF_K, 6),
-+ /* add data frame header length */
-+ BPF_STMT(BPF_ALU | BPF_ADD | BPF_K, 24),
-+ /* add index, was start of 802.11 header */
-+ BPF_STMT(BPF_ALU | BPF_ADD | BPF_X, 0),
-+ /* move to index, now start of LL header */
-+ BPF_STMT(BPF_MISC | BPF_TAX, 0),
-+
-+ /*
-+ * Accept empty data frames, we use those for
-+ * polling activity.
-+ */
-+ BPF_STMT(BPF_LD | BPF_W | BPF_LEN, 0),
-+ BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_X, 0, PASS, 0),
-+
-+ /*
-+ * Accept EAPOL frames
-+ */
-+ BPF_STMT(BPF_LD | BPF_W | BPF_IND, 0),
-+ BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, 0xAAAA0300, 0, FAIL),
-+ BPF_STMT(BPF_LD | BPF_W | BPF_IND, 4),
-+ BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, 0x0000888E, PASS, FAIL),
-+
-+ /* keep these last two statements or change the code below */
-+ /* return 0 == "DROP" */
-+ BPF_STMT(BPF_RET | BPF_K, 0),
-+ /* return ~0 == "keep all" */
-+ BPF_STMT(BPF_RET | BPF_K, ~0),
-+};
-+
-+static struct sock_fprog msock_filter = {
-+ .len = sizeof(msock_filter_insns)/sizeof(msock_filter_insns[0]),
-+ .filter = msock_filter_insns,
-+};
-+
-+
-+static int add_monitor_filter(int s)
-+{
-+ int idx;
-+
-+ /* rewrite all PASS/FAIL jump offsets */
-+ for (idx = 0; idx < msock_filter.len; idx++) {
-+ struct sock_filter *insn = &msock_filter_insns[idx];
-+
-+ if (BPF_CLASS(insn->code) == BPF_JMP) {
-+ if (insn->code == (BPF_JMP|BPF_JA)) {
-+ if (insn->k == PASS)
-+ insn->k = msock_filter.len - idx - 2;
-+ else if (insn->k == FAIL)
-+ insn->k = msock_filter.len - idx - 3;
-+ }
-+
-+ if (insn->jt == PASS)
-+ insn->jt = msock_filter.len - idx - 2;
-+ else if (insn->jt == FAIL)
-+ insn->jt = msock_filter.len - idx - 3;
-+
-+ if (insn->jf == PASS)
-+ insn->jf = msock_filter.len - idx - 2;
-+ else if (insn->jf == FAIL)
-+ insn->jf = msock_filter.len - idx - 3;
-+ }
-+ }
-+
-+ if (setsockopt(s, SOL_SOCKET, SO_ATTACH_FILTER,
-+ &msock_filter, sizeof(msock_filter))) {
-+ perror("SO_ATTACH_FILTER");
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+
- static int nl80211_create_monitor_interface(struct i802_driver_data *drv)
- {
- char buf[IFNAMSIZ];
-@@ -1936,6 +2084,12 @@ static int nl80211_create_monitor_interf
- goto error;
- }
-
-+ if (add_monitor_filter(drv->monitor_sock)) {
-+ wpa_printf(MSG_INFO, "Failed to set socket filter for monitor "
-+ "interface; do filtering in user space");
-+ /* This works, but will cost in performance. */
-+ }
-+
- if (bind(drv->monitor_sock, (struct sockaddr *) &ll,
- sizeof(ll)) < 0) {
- perror("monitor socket bind");
projects / openwrt / staging / xback.git / commitdiff