b53: define registers available and needed on BCM5301X

They are also present on some BCM63xx switches.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45355

diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h b/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h
index 4899cc4a2cd7bc1703eed901d367513d97fbf6db..7e50bb4e67750d3fe6121622967b5fd269471cff 100644 (file)
--- a/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h
+++ b/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h
@@ -50,6 +50,9 @@
 /* Jumbo Frame Registers */
 #define B53_JUMBO_PAGE                 0x40
 
+/* CFP Configuration Registers Page */
+#define B53_CFP_PAGE                   0xa1
+
 /*************************************************************************
  * Control Page registers
  *************************************************************************/
@@ -99,6 +102,25 @@
 #define B53_MC_FLOOD_MASK              0x34
 #define B53_IPMC_FLOOD_MASK            0x36
 
+/*
+ * Override Ports 0-7 State on devices with xMII interfaces (8 bit)
+ *
+ * For port 8 still use B53_PORT_OVERRIDE_CTRL
+ * Please note that not all ports are available on every hardware, e.g. BCM5301X
+ * don't include overriding port 6, BCM63xx also have some limitations.
+ */
+#define B53_GMII_PORT_OVERRIDE_CTRL(i) (0x58 + i)
+#define   GMII_PO_LINK                 BIT(0)
+#define   GMII_PO_FULL_DUPLEX          BIT(1) /* 0 = Half Duplex */
+#define   GMII_PO_SPEED_S              2
+#define   GMII_PO_SPEED_10M            (0 << GMII_PO_SPEED_S)
+#define   GMII_PO_SPEED_100M           (1 << GMII_PO_SPEED_S)
+#define   GMII_PO_SPEED_1000M          (2 << GMII_PO_SPEED_S)
+#define   GMII_PO_RX_FLOW              BIT(4)
+#define   GMII_PO_TX_FLOW              BIT(5)
+#define   GMII_PO_EN                   BIT(6) /* Use the register contents */
+#define   GMII_PO_SPEED_2000M          BIT(7) /* BCM5301X only, requires setting 1000M */
+
 /* Software reset register (8 bit) */
 #define B53_SOFTRESET                  0x79
 
@@ -156,6 +178,10 @@
 #define   GC_FRM_MGMT_PORT_04          0x00
 #define   GC_FRM_MGMT_PORT_MII         0x80
 
+/* Broadcom Header control register (8 bit) */
+#define B53_BRCM_HDR                   0x03
+#define   BRCM_HDR_EN                  BIT(0) /* Enable tagging on IMP port */
+
 /* Device ID register (8 or 32 bit) */
 #define B53_DEVICE_ID                  0x30
 
@@ -310,4 +336,11 @@
 #define   JMS_MIN_SIZE                 1518
 #define   JMS_MAX_SIZE                 9724
 
+/*************************************************************************
+ * CFP Configuration Page Registers
+ *************************************************************************/
+
+/* CFP Control Register with ports map (8 bit) */
+#define B53_CFP_CTRL                   0x00
+
 #endif /* !__B53_REGS_H */