tl-wr802n-v2)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:system" "phy0tpt"
;;
+tl-wr902ac-v1)
+ ucidef_set_led_netdev "wan" "WAN" "$board:green:lan" "eth0"
+ ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
+ ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt"
+ ;;
tl-wr940n-v4|\
tl-wr941nd-v6)
ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth0"
tl-wr703n|\
tl-wr802n-v1|\
tl-wr802n-v2|\
+ tl-wr902ac-v1|\
tube2h|\
unifiac-lite|\
wndap360|\
nbg6616|\
sc1750|\
sc450|\
- tl-wpa8630)
+ tl-wpa8630|\
+ tl-wr902ac-v1)
status_led="$board:green:power"
;;
ap90q|\
rb-952ui-5ac2nd)
ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116
;;
- re450)
+ re450|\
+ tl-wr902ac-v1)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
*"TL-WR842N/ND v3")
name="tl-wr842n-v3"
;;
+ *"TL-WR902AC v1")
+ name="tl-wr902ac-v1"
+ ;;
*"TL-WR940N v4")
name="tl-wr940n-v4"
;;
rb-952ui-5ac2nd|\
rb-962uigs-5hact2hnt|\
rb-lhg-5nd|\
- rb-mapl-2nd)
+ rb-mapl-2nd|\
+ tl-wr902ac-v1)
return 0
;;
esac
CONFIG_ATH79_MACH_TL_WR841N_V1=y
CONFIG_ATH79_MACH_TL_WR841N_V8=y
CONFIG_ATH79_MACH_TL_WR841N_V9=y
+CONFIG_ATH79_MACH_TL_WR902AC_V1=y
CONFIG_ATH79_MACH_TL_WR940N_V4=y
CONFIG_ATH79_MACH_TL_WR941ND=y
CONFIG_ATH79_MACH_TL_WR941ND_V6=y
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_TL_WR902AC_V1
+ bool "TP-LINK TL-WR902AC v1 support"
+ select SOC_QCA953X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_TL_WR941ND
bool "TP-LINK TL-WR941ND support"
select SOC_AR913X
obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o
obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9) += mach-tl-wr841n-v9.o
+obj-$(CONFIG_ATH79_MACH_TL_WR902AC_V1) += mach-tl-wr902ac-v1.o
obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o
obj-$(CONFIG_ATH79_MACH_TL_WR941ND_V6) += mach-tl-wr941nd-v6.o
obj-$(CONFIG_ATH79_MACH_TL_WR940N_V4) += mach-tl-wr940n-v4.o
--- /dev/null
+/*
+ * TP-Link TL-WR902AC v1 board support
+ *
+ * Copyright (C) 2017 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+
+#define TL_WR902AC_V1_GPIO_LED_LAN 12
+#define TL_WR902AC_V1_GPIO_LED_POWER 13
+#define TL_WR902AC_V1_GPIO_LED_USB 4
+#define TL_WR902AC_V1_GPIO_LED_WLAN2G 11
+#define TL_WR902AC_V1_GPIO_LED_WPS 0
+
+#define TL_WR902AC_V1_GPIO_BTN_RESET 3
+#define TL_WR902AC_V1_GPIO_BTN_SW1 17
+#define TL_WR902AC_V1_GPIO_BTN_SW2 14
+#define TL_WR902AC_V1_GPIO_BTN_WPS 2
+
+#define TL_WR902AC_V1_GPIO_USB_POWER 1
+
+#define TL_WR902AC_V1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR902AC_V1_KEYS_DEBOUNCE_INTERVAL \
+ (3 * TL_WR902AC_V1_KEYS_POLL_INTERVAL)
+
+static struct gpio_led tl_wr902ac_v1_leds_gpio[] __initdata = {
+ {
+ .name = "tl-wr902ac-v1:green:lan",
+ .gpio = TL_WR902AC_V1_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "tl-wr902ac-v1:green:power",
+ .gpio = TL_WR902AC_V1_GPIO_LED_POWER,
+ .active_low = 0,
+ }, {
+ .name = "tl-wr902ac-v1:green:usb",
+ .gpio = TL_WR902AC_V1_GPIO_LED_USB,
+ .active_low = 0,
+ }, {
+ .name = "tl-wr902ac-v1:green:wlan2g",
+ .gpio = TL_WR902AC_V1_GPIO_LED_WLAN2G,
+ .active_low = 1,
+ }, {
+ .name = "tl-wr902ac-v1:green:wps",
+ .gpio = TL_WR902AC_V1_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_wr902ac_v1_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR902AC_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR902AC_V1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "sw1",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = TL_WR902AC_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR902AC_V1_GPIO_BTN_SW1,
+ .active_low = 1,
+ }, {
+ .desc = "sw2",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = TL_WR902AC_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR902AC_V1_GPIO_BTN_SW2,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR902AC_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR902AC_V1_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init tl_wr902ac_v1_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f750008);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_data.speed = SPEED_100;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_register_eth(0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr902ac_v1_leds_gpio),
+ tl_wr902ac_v1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WR902AC_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr902ac_v1_gpio_keys),
+ tl_wr902ac_v1_gpio_keys);
+
+ gpio_request_one(TL_WR902AC_V1_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+
+ ath79_register_usb();
+
+ ath79_register_wmac(art + 0x1000, mac);
+
+ ap91_pci_init(art + 0x5000, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR902AC_V1, "TL-WR902AC-V1", "TP-LINK TL-WR902AC v1",
+ tl_wr902ac_v1_setup);
ATH79_MACH_TL_WR841N_V9, /* TP-LINK TL-WR841N/ND v9 */
ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */
ATH79_MACH_TL_WR842N_V3, /* TP-LINK TL-WR842N/ND v3 */
+ ATH79_MACH_TL_WR902AC_V1, /* TP-LINK TL-WR902AC v1 */
ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
ATH79_MACH_TL_WR941ND_V5, /* TP-LINK TL-WR941ND v5 */
ATH79_MACH_TL_WR941ND_V6, /* TP-LINK TL-WR941ND v6 */
endef
TARGET_DEVICES += tl-wr842n-v1 tl-wr842n-v2 tl-wr842n-v3 tl-wr843nd-v1 tl-wr847n-v8
+define Device/tl-wr902ac-v1
+ DEVICE_TITLE := TP-LINK TL-WR902AC v1
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport \
+ kmod-ath10k ath10k-firmware-qca9887 -swconfig -uboot-envtools
+ BOARDNAME := TL-WR902AC-V1
+ DEVICE_PROFILE := TLWR902
+ TPLINK_BOARD_ID := TL-WR902AC-V1
+ TPLINK_HWID := 0x0
+ SUPPORTED_DEVICES := tl-wr902ac-v1
+ IMAGE_SIZE := 7360k
+ KERNEL := kernel-bin | patch-cmdline | lzma | mktplinkfw-kernel
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \
+ append-metadata | check-size $$$$(IMAGE_SIZE)
+ MTDPARTS := spi0.0:128k(u-boot)ro,7360k(firmware),640k(tplink)ro,64k(art)ro
+endef
+TARGET_DEVICES += tl-wr902ac-v1
+
define Device/tl-wr940n-v4
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR940N v4
# CONFIG_ATH79_MACH_TL_WR841N_V1 is not set
# CONFIG_ATH79_MACH_TL_WR841N_V8 is not set
# CONFIG_ATH79_MACH_TL_WR841N_V9 is not set
+# CONFIG_ATH79_MACH_TL_WR902AC_V1 is not set
# CONFIG_ATH79_MACH_TL_WR940N_V4 is not set
# CONFIG_ATH79_MACH_TL_WR941ND is not set
# CONFIG_ATH79_MACH_TL_WR941ND_V6 is not set
# CONFIG_ATH79_MACH_TL_WR841N_V1 is not set
# CONFIG_ATH79_MACH_TL_WR841N_V8 is not set
# CONFIG_ATH79_MACH_TL_WR841N_V9 is not set
+# CONFIG_ATH79_MACH_TL_WR902AC_V1 is not set
# CONFIG_ATH79_MACH_TL_WR940N_V4 is not set
# CONFIG_ATH79_MACH_TL_WR941ND is not set
# CONFIG_ATH79_MACH_TL_WR941ND_V6 is not set
.last_sysupgrade_partition = "file-system"
},
+ /** Firmware layout for the TL-WR902AC v1 */
+ {
+ .id = "TL-WR902AC-V1",
+ .vendor = "",
+ .support_list =
+ "SupportList:\n"
+ "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n",
+ .support_trail = '\x00',
+ .soft_ver = NULL,
+
+ /**
+ 384KB were moved from file-system to os-image
+ in comparison to the stock image
+ */
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x20000},
+ {"os-image", 0x20000, 0x160000},
+ {"file-system", 0x180000, 0x5d0000},
+ {"default-mac", 0x750000, 0x00200},
+ {"pin", 0x750200, 0x00200},
+ {"product-info", 0x750400, 0x0fc00},
+ {"soft-version", 0x760000, 0x0b000},
+ {"support-list", 0x76b000, 0x04000},
+ {"profile", 0x770000, 0x04000},
+ {"default-config", 0x774000, 0x0b000},
+ {"user-config", 0x780000, 0x40000},
+ {"partition-table", 0x7c0000, 0x10000},
+ {"log", 0x7d0000, 0x20000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+
/** Firmware layout for the TL-WR942N V1 */
{
.id = "TLWR942NV1",
projects / openwrt / staging / adrian.git / commitdiff