return 0;
}
+/* The ADC does not support i2c read, so only write is implemented */
int snd_ca0106_i2c_write(struct snd_ca0106 *emu,
u32 reg,
u32 value)
}
tmp = reg << 25 | value << 16;
+ // snd_printk("I2C-write:reg=0x%x, value=0x%x\n", reg, value);
/* Not sure what this I2C channel controls. */
/* snd_ca0106_ptr_write(emu, I2C_D0, 0, tmp); */
for (retry = 0; retry < 10; retry++) {
/* Send the data to i2c */
- tmp = snd_ca0106_ptr_read(emu, I2C_A, 0);
- tmp = tmp & ~(I2C_A_ADC_READ|I2C_A_ADC_LAST|I2C_A_ADC_START|I2C_A_ADC_ADD_MASK);
+ //tmp = snd_ca0106_ptr_read(emu, I2C_A, 0);
+ //tmp = tmp & ~(I2C_A_ADC_READ|I2C_A_ADC_LAST|I2C_A_ADC_START|I2C_A_ADC_ADD_MASK);
+ tmp = 0;
tmp = tmp | (I2C_A_ADC_LAST|I2C_A_ADC_START|I2C_A_ADC_ADD);
snd_ca0106_ptr_write(emu, I2C_A, 0, tmp);
0x1400,
};
+static unsigned int i2c_adc_init[][2] = {
+ { 0x17, 0x00 }, /* Reset */
+ { 0x07, 0x00 }, /* Timeout */
+ { 0x0b, 0x22 }, /* Interface control */
+ { 0x0c, 0x22 }, /* Master mode control */
+ { 0x0d, 0x08 }, /* Powerdown control */
+ { 0x0e, 0xcf }, /* Attenuation Left 0x01 = -103dB, 0xff = 24dB */
+ { 0x0f, 0xcf }, /* Attenuation Right 0.5dB steps */
+ { 0x10, 0x7b }, /* ALC Control 1 */
+ { 0x11, 0x00 }, /* ALC Control 2 */
+ { 0x12, 0x32 }, /* ALC Control 3 */
+ { 0x13, 0x00 }, /* Noise gate control */
+ { 0x14, 0xa6 }, /* Limiter control */
+ { 0x15, ADC_MUX_LINEIN }, /* ADC Mixer control */
+};
+
static int __devinit snd_ca0106_create(struct snd_card *card,
struct pci_dev *pci,
struct snd_ca0106 **rchip)
snd_ca0106_ptr_write(chip, CAPTURE_SOURCE, 0x0, 0x333300e4); /* Select MIC, Line in, TAD in, AUX in */
chip->capture_source = 3; /* Set CAPTURE_SOURCE */
- if (chip->details->gpio_type == 1) { /* The SB0410 and SB0413 use GPIO differently. */
+ if (chip->details->gpio_type == 2) { /* The SB0410 and SB0413 use GPIO differently. */
+ /* FIXME: Still need to find out what the other GPIO bits do. E.g. For digital spdif out. */
+ outl(0x0, chip->port+GPIO);
+ //outl(0x00f0e000, chip->port+GPIO); /* Analog */
+ outl(0x005f5301, chip->port+GPIO); /* Analog */
+ } else if (chip->details->gpio_type == 1) { /* The SB0410 and SB0413 use GPIO differently. */
/* FIXME: Still need to find out what the other GPIO bits do. E.g. For digital spdif out. */
outl(0x0, chip->port+GPIO);
//outl(0x00f0e000, chip->port+GPIO); /* Analog */
outl(HCFG_AC97 | HCFG_AUDIOENABLE, chip->port+HCFG); /* AC97 2.0, Enable outputs. */
if (chip->details->i2c_adc == 1) { /* The SB0410 and SB0413 use I2C to control ADC. */
- snd_ca0106_i2c_write(chip, ADC_MUX, ADC_MUX_LINEIN); /* Enable Line-in capture. MIC in currently untested. */
+ int size, n;
+
+ size = ARRAY_SIZE(i2c_adc_init);
+ //snd_printk("I2C:array size=0x%x\n", size);
+ for (n=0; n < size; n++) {
+ snd_ca0106_i2c_write(chip, i2c_adc_init[n][0], i2c_adc_init[n][1]);
+ }
+ for (n=0; n < 4; n++) {
+ chip->i2c_capture_volume[n][0]= 0xcf;
+ chip->i2c_capture_volume[n][1]= 0xcf;
+ }
+ chip->i2c_capture_source=2; /* Line in */
+ //snd_ca0106_i2c_write(chip, ADC_MUX, ADC_MUX_LINEIN); /* Enable Line-in capture. MIC in currently untested. */
}
if (chip->details->spi_dac == 1) { /* The SB0570 use SPI to control DAC. */
int size, n;
return change;
}
+static int snd_ca0106_i2c_capture_source_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static char *texts[6] = {
+ "Phone", "Mic", "Line in", "Aux"
+ };
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = 4;
+ if (uinfo->value.enumerated.item > 3)
+ uinfo->value.enumerated.item = 3;
+ strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]);
+ return 0;
+}
+
+static int snd_ca0106_i2c_capture_source_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ca0106 *emu = snd_kcontrol_chip(kcontrol);
+
+ ucontrol->value.enumerated.item[0] = emu->i2c_capture_source;
+ return 0;
+}
+
+static int snd_ca0106_i2c_capture_source_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ca0106 *emu = snd_kcontrol_chip(kcontrol);
+ unsigned int source_id;
+ unsigned int ngain, ogain;
+ int change = 0;
+ u32 source;
+ /* If the capture source has changed,
+ * update the capture volume from the cached value
+ * for the particular source.
+ */
+ source_id = ucontrol->value.enumerated.item[0] ;
+ change = (emu->i2c_capture_source != source_id);
+ if (change) {
+ snd_ca0106_i2c_write(emu, ADC_MUX, 0); /* Mute input */
+ ngain = emu->i2c_capture_volume[source_id][0]; /* Left */
+ ogain = emu->i2c_capture_volume[emu->i2c_capture_source][0]; /* Left */
+ if (ngain != ogain)
+ snd_ca0106_i2c_write(emu, ADC_ATTEN_ADCL, ((ngain) & 0xff));
+ ngain = emu->i2c_capture_volume[source_id][1]; /* Left */
+ ogain = emu->i2c_capture_volume[emu->i2c_capture_source][1]; /* Left */
+ if (ngain != ogain)
+ snd_ca0106_i2c_write(emu, ADC_ATTEN_ADCR, ((ngain) & 0xff));
+ source = 1 << source_id;
+ snd_ca0106_i2c_write(emu, ADC_MUX, source); /* Set source */
+ emu->i2c_capture_source = source_id;
+ }
+ return change;
+}
+
static int snd_ca0106_capture_mic_line_in_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
if (change) {
emu->capture_mic_line_in = val;
if (val) {
- snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_PHONE); /* Mute input */
+ //snd_ca0106_i2c_write(emu, ADC_MUX, 0); /* Mute input */
tmp = inl(emu->port+GPIO) & ~0x400;
tmp = tmp | 0x400;
outl(tmp, emu->port+GPIO);
- snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_MIC);
+ //snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_MIC);
} else {
- snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_PHONE); /* Mute input */
+ //snd_ca0106_i2c_write(emu, ADC_MUX, 0); /* Mute input */
tmp = inl(emu->port+GPIO) & ~0x400;
outl(tmp, emu->port+GPIO);
- snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_LINEIN);
+ //snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_LINEIN);
}
}
return change;
static struct snd_kcontrol_new snd_ca0106_capture_mic_line_in __devinitdata =
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Mic/Line in Capture",
+ .name = "Shared Mic/Line in Capture Switch",
.info = snd_ca0106_capture_mic_line_in_info,
.get = snd_ca0106_capture_mic_line_in_get,
.put = snd_ca0106_capture_mic_line_in_put
return 1;
}
+static int snd_ca0106_i2c_volume_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 2;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 255;
+ return 0;
+}
+
+static int snd_ca0106_i2c_volume_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ca0106 *emu = snd_kcontrol_chip(kcontrol);
+ int source_id;
+
+ source_id = kcontrol->private_value;
+
+ ucontrol->value.integer.value[0] = emu->i2c_capture_volume[source_id][0];
+ ucontrol->value.integer.value[1] = emu->i2c_capture_volume[source_id][1];
+ return 0;
+}
+
+static int snd_ca0106_i2c_volume_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ca0106 *emu = snd_kcontrol_chip(kcontrol);
+ unsigned int ogain;
+ unsigned int ngain;
+ int source_id;
+ int change = 0;
+
+ source_id = kcontrol->private_value;
+ ogain = emu->i2c_capture_volume[source_id][0]; /* Left */
+ ngain = ucontrol->value.integer.value[0];
+ if (ngain > 0xff)
+ return 0;
+ if (ogain != ngain) {
+ if (emu->i2c_capture_source == source_id)
+ snd_ca0106_i2c_write(emu, ADC_ATTEN_ADCL, ((ngain) & 0xff) );
+ emu->i2c_capture_volume[source_id][0] = ucontrol->value.integer.value[0];
+ change = 1;
+ }
+ ogain = emu->i2c_capture_volume[source_id][1]; /* Right */
+ ngain = ucontrol->value.integer.value[1];
+ if (ngain > 0xff)
+ return 0;
+ if (ogain != ngain) {
+ if (emu->i2c_capture_source == source_id)
+ snd_ca0106_i2c_write(emu, ADC_ATTEN_ADCR, ((ngain) & 0xff));
+ emu->i2c_capture_volume[source_id][1] = ucontrol->value.integer.value[1];
+ change = 1;
+ }
+
+ return change;
+}
+
#define CA_VOLUME(xname,chid,reg) \
{ \
.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
- .info = snd_ca0106_volume_info, \
- .get = snd_ca0106_volume_get, \
- .put = snd_ca0106_volume_put, \
+ .info = snd_ca0106_volume_info, \
+ .get = snd_ca0106_volume_get, \
+ .put = snd_ca0106_volume_put, \
.private_value = ((chid) << 8) | (reg) \
}
+#define I2C_VOLUME(xname,chid) \
+{ \
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+ .info = snd_ca0106_i2c_volume_info, \
+ .get = snd_ca0106_i2c_volume_get, \
+ .put = snd_ca0106_i2c_volume_put, \
+ .private_value = chid \
+}
+
static struct snd_kcontrol_new snd_ca0106_volume_ctls[] __devinitdata = {
CA_VOLUME("Analog Front Playback Volume",
CA_VOLUME("CAPTURE feedback Playback Volume",
1, CAPTURE_CONTROL),
+ I2C_VOLUME("Phone Capture Volume", 0),
+ I2C_VOLUME("Mic Capture Volume", 1),
+ I2C_VOLUME("Line in Capture Volume", 2),
+ I2C_VOLUME("Aux Capture Volume", 3),
+
{
.access = SNDRV_CTL_ELEM_ACCESS_READ,
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
+ .name = "Digital Capture Source",
.info = snd_ca0106_capture_source_info,
.get = snd_ca0106_capture_source_get,
.put = snd_ca0106_capture_source_put
},
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Capture Source",
+ .info = snd_ca0106_i2c_capture_source_info,
+ .get = snd_ca0106_i2c_capture_source_get,
+ .put = snd_ca0106_i2c_capture_source_put
+ },
{
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT),