iio: mma8452: add freefall / motion interrupt source

This adds the freefall / motion interrupt source definitions to the driver.
It is used in this series' next patch, for chips that don't support the
transient interrupt source.

Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 7b2ab17dfe844c1f98b36f8603ffecb90a2d0bc8..6b1a8629505a5de0ad40ccfa670056bed2522350 100644 (file)
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -42,6 +42,16 @@
 #define  MMA8452_DATA_CFG_HPF_MASK             BIT(4)
 #define MMA8452_HP_FILTER_CUTOFF               0x0f
 #define  MMA8452_HP_FILTER_CUTOFF_SEL_MASK     GENMASK(1, 0)
+#define MMA8452_FF_MT_CFG                      0x15
+#define  MMA8452_FF_MT_CFG_OAE                 BIT(6)
+#define  MMA8452_FF_MT_CFG_ELE                 BIT(7)
+#define MMA8452_FF_MT_SRC                      0x16
+#define  MMA8452_FF_MT_SRC_XHE                 BIT(1)
+#define  MMA8452_FF_MT_SRC_YHE                 BIT(3)
+#define  MMA8452_FF_MT_SRC_ZHE                 BIT(5)
+#define MMA8452_FF_MT_THS                      0x17
+#define  MMA8452_FF_MT_THS_MASK                        0x7f
+#define MMA8452_FF_MT_COUNT                    0x18
 #define MMA8452_TRANSIENT_CFG                  0x1d
 #define  MMA8452_TRANSIENT_CFG_HPF_BYP         BIT(0)
 #define  MMA8452_TRANSIENT_CFG_CHAN(chan)      BIT(chan + 1)
@@ -69,6 +79,7 @@
 #define MMA8452_MAX_REG                                0x31
 
 #define  MMA8452_INT_DRDY                      BIT(0)
+#define  MMA8452_INT_FF_MT                     BIT(2)
 #define  MMA8452_INT_TRANS                     BIT(5)
 
 #define  MMA8452_DEVICE_ID                     0x2a
@@ -613,7 +624,8 @@ static int mma8452_write_event_config(struct iio_dev *indio_dev,
        else
                val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift);
 
-       val |= MMA8452_TRANSIENT_CFG_ELE;
+       val |= chip->ev_cfg_ele;
+       val |= MMA8452_FF_MT_CFG_OAE;
 
        return mma8452_change_config(data, chip->ev_cfg, val);
 }
@@ -654,6 +666,7 @@ static irqreturn_t mma8452_interrupt(int irq, void *p)
 {
        struct iio_dev *indio_dev = p;
        struct mma8452_data *data = iio_priv(indio_dev);
+       const struct mma_chip_info *chip = data->chip_info;
        int ret = IRQ_NONE;
        int src;
 
@@ -666,7 +679,10 @@ static irqreturn_t mma8452_interrupt(int irq, void *p)
                ret = IRQ_HANDLED;
        }
 
-       if (src & MMA8452_INT_TRANS) {
+       if ((src & MMA8452_INT_TRANS &&
+            chip->ev_src == MMA8452_TRANSIENT_SRC) ||
+           (src & MMA8452_INT_FF_MT &&
+            chip->ev_src == MMA8452_FF_MT_SRC)) {
                mma8452_transient_interrupt(indio_dev);
                ret = IRQ_HANDLED;
        }
@@ -728,6 +744,16 @@ static const struct iio_event_spec mma8452_transient_event[] = {
        },
 };
 
+static const struct iio_event_spec mma8452_motion_event[] = {
+       {
+               .type = IIO_EV_TYPE_MAG,
+               .dir = IIO_EV_DIR_RISING,
+               .mask_separate = BIT(IIO_EV_INFO_ENABLE),
+               .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
+                                       BIT(IIO_EV_INFO_PERIOD)
+       },
+};
+
 /*
  * Threshold is configured in fixed 8G/127 steps regardless of
  * currently selected scale for measurement.
@@ -1013,13 +1039,15 @@ static int mma8452_probe(struct i2c_client *client,
 
        if (client->irq) {
                /*
-                * Although we enable the transient interrupt source once and
-                * for all here the transient event detection itself is not
-                * enabled until userspace asks for it by
-                * mma8452_write_event_config()
+                * Although we enable the interrupt sources once and for
+                * all here the event detection itself is not enabled until
+                * userspace asks for it by mma8452_write_event_config()
                 */
-               int supported_interrupts = MMA8452_INT_DRDY | MMA8452_INT_TRANS;
-               int enabled_interrupts = MMA8452_INT_TRANS;
+               int supported_interrupts = MMA8452_INT_DRDY |
+                                          MMA8452_INT_TRANS |
+                                          MMA8452_INT_FF_MT;
+               int enabled_interrupts = MMA8452_INT_TRANS |
+                                        MMA8452_INT_FF_MT;
 
                /* Assume wired to INT1 pin */
                ret = i2c_smbus_write_byte_data(client,