Until now only HW modded SPI flash version was supported.
BCM6328 with 64M RAM and 128M NAND.
More info: https://openwrt.org/toh/sercomm/ad1018
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
sagem,fast-2704-v2)
ucidef_set_led_usbdev "usb" "USB" "F@ST2704V2:green:usb" "1-1"
;;
+sercomm,ad1018|\
sercomm,ad1018-nor)
ucidef_set_led_netdev "wlan0" "WLAN" "AD1018:green:wifi" "wlan0"
;;
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "8t@eth0"
;;
+sercomm,ad1018|\
sercomm,ad1018-nor)
ucidef_add_switch "switch0" \
"1:lan:3" "2:lan:2" "3:lan:1" "0:wan" "8t@eth0"
zyxel,p870hw-51a-v2)
do_fixcrc
;;
+ sercomm,ad1018)
+ mtd erase bootflag2
+ ;;
esac
case "$(board_name)" in
comtrend,vg-8050|\
comtrend,vr-3032u|\
- netgear,dgnd3700-v2)
+ netgear,dgnd3700-v2|\
+ sercomm,ad1018)
# NAND sysupgrade
return 0
;;
case "$(board_name)" in
comtrend,vg-8050|\
comtrend,vr-3032u|\
- netgear,dgnd3700-v2)
+ netgear,dgnd3700-v2|\
+ sercomm,ad1018)
REQUIRE_IMAGE_METADATA=1
cfe_jffs2_upgrade_tar "$1"
;;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+
+#include "bcm6328.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Sercomm AD1018";
+ compatible = "sercomm,ad1018", "brcm,bcm6328";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&pinctrl 24 1>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+
+ wifi {
+ label = "wifi";
+ gpios = <&pinctrl 25 1>;
+ linux,code = <KEY_WLAN>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&pinctrl 31 1>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&leds {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds &pinctrl_serial_led
+ &pinctrl_ephy0_spd_led &pinctrl_ephy1_act_led
+ &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
+
+ brcm,serial-leds;
+ brcm,serial-shift-inv;
+ brcm,serial-dat-low;
+
+ led@0 {
+ reg = <0>;
+ active-low;
+ label = "ad1018:red:internet";
+ };
+
+ led@1 {
+ reg = <1>;
+ active-low;
+ label = "ad1018:green:internet";
+ };
+
+ led_power_green: led@8 {
+ reg = <8>;
+ active-low;
+ label = "ad1018:green:power";
+ default-state = "on";
+ };
+
+ led@10 {
+ reg = <10>;
+ active-low;
+ label = "ad1018:green:adsl";
+ };
+
+ led@11 {
+ reg = <11>;
+ active-low;
+ label = "ad1018:red:adsl";
+ };
+
+ led@12 {
+ reg = <12>;
+ active-low;
+ label = "ad1018:green:phone";
+ };
+
+ led@13 {
+ reg = <13>;
+ active-low;
+ label = "ad1018:green:wps";
+ };
+
+ led@14 {
+ reg = <14>;
+ active-low;
+ label = "ad1018:green:wifi";
+ };
+
+ led@15 {
+ reg = <15>;
+ active-low;
+ label = "ad1018:green:usb";
+ };
+
+ led@17 {
+ /* EPHY0 Spd */
+ reg = <17>;
+ brcm,hardware-controlled;
+ };
+};
+
+&nflash {
+ status = "okay";
+
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ reg = <0>;
+ nand-ecc-step-size = <512>;
+ nand-ecc-strength = <15>;
+ nand-on-flash-bbt;
+ brcm,nand-oob-sector-size = <64>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "cferom";
+ reg = <0x0000000 0x0020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "mmap";
+ reg = <0x0020000 0x00a0000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "cferam1";
+ reg = <0x00c0000 0x0140000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "cferam2";
+ reg = <0x0200000 0x0140000>;
+ read-only;
+ };
+
+ partition@520000 {
+ compatible = "brcm,wfi-sercomm";
+ label = "wfi";
+ reg = <0x0520000 0x6400000>;
+ };
+
+ partition@6920000 {
+ label = "bootflag1";
+ reg = <0x6920000 0x0140000>;
+ };
+
+ partition@6a60000 {
+ label = "bootflag2";
+ reg = <0x6a60000 0x0140000>;
+ };
+
+ partition@6ba0000 {
+ label = "xml_cfg";
+ reg = <0x6ba0000 0x0280000>;
+ read-only;
+ };
+
+ partition@6e20000 {
+ label = "app_dat";
+ reg = <0x6e20000 0x0280000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ pinctrl_leds: leds {
+ function = "led";
+ pins = "gpio0", "gpio1";
+ };
+};
+
+&uart0 {
+ status = "ok";
+};
$(firstword $(subst +,$(space),$(subst root.,,$(notdir $(1)))))
endef
+define Build/ad1018-jffs2-cferam
+ mv $@ $@.kernel
+
+ rm -rf $@-cferam
+ mkdir -p $@-cferam
+
+ # CFE RAM JFFS2 partition
+ cp $(KDIR)/bcm63xx-cfe/$(CFE_RAM_FILE) $@-cferam/$(CFE_RAM_JFFS2_NAME)
+ $(call Build/cfe-jffs2,$@-cferam)
+ mv $@ $@.cferam
+
+ # First block of CFE RAM 1 will be destroyed by MMAP
+ dd if=$@.cferam bs=$(BLOCKSIZE) count=1 > $@
+ dd if=$@.cferam >> $@
+ $(call Build/pad-to,896k)
+
+ # CFE RAM 2
+ dd if=$@.cferam >> $@
+
+ # Append kernel @ 4M
+ $(call Build/pad-to,4096k)
+ dd if=$@.kernel >> $@
+ rm -f $@.kernel
+endef
+
define Build/cfe-bin
$(STAGING_DIR_HOST)/bin/imagetag -i $(IMAGE_KERNEL) -f $(IMAGE_ROOTFS) \
--output $@ --boardid $(CFE_BOARD_ID) --chipid $(CFE_CHIP_ID) \
CFE_WFI_FLASH_TYPE := 2
endef
TARGET_DEVICES += netgear_dgnd3700-v2
+
+### Sercomm ###
+define Device/sercomm_ad1018
+ $(Device/bcm63xx-nand)
+ IMAGE/cfe.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | ad1018-jffs2-cferam | append-ubi | cfe-wfi-tag
+ DEVICE_VENDOR := Sercomm
+ DEVICE_MODEL := AD1018
+ CFE_CHIP_ID := 6328
+ CFE_RAM_FILE := sercomm,ad1018/cferam
+ CFE_RAM_JFFS2_NAME := cferam
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ SUBPAGESIZE := 512
+ VID_HDR_OFFSET := 2048
+ DEVICE_PACKAGES += $(B43_PACKAGES) $(USB2_PACKAGES)
+ CFE_WFI_FLASH_TYPE := 3
+endef
+TARGET_DEVICES += sercomm_ad1018
&board_AR5381u,
&board_AR5387un,
&board_963281TAN,
-@@ -2719,6 +2787,7 @@ static struct of_device_id const bcm963x
+@@ -2719,6 +2787,8 @@ static struct of_device_id const bcm963x
{ .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
{ .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, },
{ .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
++ { .compatible = "sercomm,ad1018", .data = &board_AD1018, },
+ { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, },
#endif
#ifdef CONFIG_BCM63XX_CPU_6338
#endif
};
-@@ -2874,6 +2918,7 @@ static struct of_device_id const bcm963x
+@@ -2875,6 +2919,7 @@ static struct of_device_id const bcm963x
{ .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
{ .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
{ .compatible = "inteno,vg50", .data = &board_vw6339gu, },
&board_vw6339gu,
&board_BSKYB_63168,
#endif
-@@ -2917,6 +2956,7 @@ static struct of_device_id const bcm963x
+@@ -2918,6 +2957,7 @@ static struct of_device_id const bcm963x
#ifdef CONFIG_BCM63XX_CPU_63268
{ .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
{ .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
&board_fast2504n,
#endif
-@@ -2934,6 +2960,7 @@ static struct of_device_id const bcm963x
+@@ -2935,6 +2961,7 @@ static struct of_device_id const bcm963x
{ .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, },
#endif
#ifdef CONFIG_BCM63XX_CPU_6362
&board_VR3032u,
&board_vw6339gu,
&board_BSKYB_63168,
-@@ -2983,6 +3007,7 @@ static struct of_device_id const bcm963x
+@@ -2984,6 +3008,7 @@ static struct of_device_id const bcm963x
#ifdef CONFIG_BCM63XX_CPU_63268
{ .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
{ .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
projects / openwrt / staging / luka.git / commitdiff