arm64: dts: meson-g12a-sei510: Enable Wifi SDIO module

The SEI510 embeds an AP6398S SDIO module, let's add the
corresponding SDIO, PWM clock and mmc-pwrseq nodes.

Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index be1d9ed6d5210a1f50194cbe06ecc42d2e7b1026..a1821d850a6da4335064fa47677bf751a15c565e 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -128,6 +128,20 @@
                        no-map;
                };
        };
+
+       sdio_pwrseq: sdio-pwrseq {
+               compatible = "mmc-pwrseq-simple";
+               reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+               clocks = <&wifi32k>;
+               clock-names = "ext_clock";
+       };
+
+       wifi32k: wifi32k {
+               compatible = "pwm-clock";
+               #clock-cells = <0>;
+               clock-frequency = <32768>;
+               pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+       };
 };
 
 &cec_AO {
@@ -174,11 +188,47 @@
        pinctrl-names = "default";
 };
 
+&pwm_ef {
+       status = "okay";
+       pinctrl-0 = <&pwm_e_pins>;
+       pinctrl-names = "default";
+       clocks = <&xtal>;
+       clock-names = "clkin0";
+};
+
 &saradc {
        status = "okay";
        vref-supply = <&vddio_ao1v8>;
 };
 
+/* SDIO */
+&sd_emmc_a {
+       status = "okay";
+       pinctrl-0 = <&sdio_pins>;
+       pinctrl-1 = <&sdio_clk_gate_pins>;
+       pinctrl-names = "default", "clk-gate";
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       bus-width = <4>;
+       cap-sd-highspeed;
+       sd-uhs-sdr50;
+       max-frequency = <100000000>;
+
+       non-removable;
+       disable-wp;
+
+       mmc-pwrseq = <&sdio_pwrseq>;
+
+       vmmc-supply = <&vddao_3v3>;
+       vqmmc-supply = <&vddio_ao1v8>;
+
+       brcmf: wifi@1 {
+               reg = <1>;
+               compatible = "brcm,bcm4329-fmac";
+       };
+};
+
 /* SD card */
 &sd_emmc_b {
        status = "okay";