ARM: dts: sun9i: a80-optimus: Drop sunxi-common-regulators.dtsi

sunxi-common-regulators.dtsi provided dummy regulators vcc3v0, vcc3v3,
vcc5v0. 3.0V/3.3V and 5.0V are commonly used voltages in Allwinner
devices. These dummy regulators provide a stand-in when bindings that
require one, but the real regulator is not supported yet.

Since these are no longer needed, we can drop the include file by
copying over reg_usb1_vbus.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 6cfc021940351789012d3e501cebe16ac0878f29..78fddd9152a5dc583f44a9d69630791362c86e29 100644 (file)
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -44,7 +44,6 @@
 
 /dts-v1/;
 #include "sun9i-a80.dtsi"
-#include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
@@ -85,6 +84,17 @@
                };
        };
 
+       reg_usb1_vbus: usb1-vbus {
+               compatible = "regulator-fixed";
+               pinctrl-names = "default";
+               pinctrl-0 = <&usb1_vbus_pin_optimus>;
+               regulator-name = "usb1-vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               enable-active-high;
+               gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       };
+
        reg_usb3_vbus: usb3-vbus {
                compatible = "regulator-fixed";
                pinctrl-names = "default";
@@ -172,12 +182,6 @@
        allwinner,drive = <SUN4I_PINCTRL_40_MA>;
 };
 
-&reg_usb1_vbus {
-       pinctrl-0 = <&usb1_vbus_pin_optimus>;
-       gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-       status = "okay";
-};
-
 &r_ir {
        status = "okay";
 };