--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for MikroTik RouterBoot hard config.
+ *
+ * Copyright (C) 2020 Thibaut VARÈNE <hacks+kernel@slashdirt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This driver exposes the data encoded in the "hard_config" flash segment of
+ * MikroTik RouterBOARDs devices. It presents the data in a sysfs folder
+ * named "hard_config". The WLAN calibration data is available on demand via
+ * the 'wlan_data' sysfs file in that folder.
+ *
+ * This driver permanently allocates a chunk of RAM as large as the hard_config
+ * MTD partition, although it is technically possible to operate entirely from
+ * the MTD device without using a local buffer (except when requesting WLAN
+ * calibration data), at the cost of a performance penalty.
+ *
+ * Some constant defines extracted from routerboot.{c,h} by Gabor Juhos
+ * <juhosg@openwrt.org>
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/kobject.h>
+#include <linux/bitops.h>
+#include <linux/string.h>
+#include <linux/mtd/mtd.h>
+#include <linux/sysfs.h>
+#include <linux/lzo.h>
+
+#include "routerboot.h"
+
+#define RB_HARDCONFIG_VER "0.01"
+#define RB_HC_PR_PFX "[rb_hardconfig] "
+
+/* ID values for hardware settings */
+#define RB_ID_FLASH_INFO 0x03
+#define RB_ID_MAC_ADDRESS_PACK 0x04
+#define RB_ID_BOARD_PRODUCT_CODE 0x05
+#define RB_ID_BIOS_VERSION 0x06
+#define RB_ID_SDRAM_TIMINGS 0x08
+#define RB_ID_DEVICE_TIMINGS 0x09
+#define RB_ID_SOFTWARE_ID 0x0A
+#define RB_ID_SERIAL_NUMBER 0x0B
+#define RB_ID_MEMORY_SIZE 0x0D
+#define RB_ID_MAC_ADDRESS_COUNT 0x0E
+#define RB_ID_HW_OPTIONS 0x15
+#define RB_ID_WLAN_DATA 0x16
+#define RB_ID_BOARD_IDENTIFIER 0x17
+#define RB_ID_PRODUCT_NAME 0x21
+#define RB_ID_DEFCONF 0x26
+
+/* Bit definitions for hardware options */
+#define RB_HW_OPT_NO_UART BIT(0)
+#define RB_HW_OPT_HAS_VOLTAGE BIT(1)
+#define RB_HW_OPT_HAS_USB BIT(2)
+#define RB_HW_OPT_HAS_ATTINY BIT(3)
+#define RB_HW_OPT_NO_NAND BIT(14)
+#define RB_HW_OPT_HAS_LCD BIT(15)
+#define RB_HW_OPT_HAS_POE_OUT BIT(16)
+#define RB_HW_OPT_HAS_uSD BIT(17)
+#define RB_HW_OPT_HAS_SIM BIT(18)
+#define RB_HW_OPT_HAS_SFP BIT(20)
+#define RB_HW_OPT_HAS_WIFI BIT(21)
+#define RB_HW_OPT_HAS_TS_FOR_ADC BIT(22)
+#define RB_HW_OPT_HAS_PLC BIT(29)
+
+static struct kobject *hc_kobj;
+static u8 *hc_buf; // ro buffer after init(): no locking required
+static size_t hc_buflen;
+
+/* Array of known hw_options bits with human-friendly parsing */
+static struct hc_hwopt {
+ const u32 bit;
+ const char *str;
+} const hc_hwopts[] = {
+ {
+ .bit = RB_HW_OPT_NO_UART,
+ .str = "no UART\t\t",
+ }, {
+ .bit = RB_HW_OPT_HAS_VOLTAGE,
+ .str = "has Vreg\t",
+ }, {
+ .bit = RB_HW_OPT_HAS_USB,
+ .str = "has usb\t\t",
+ }, {
+ .bit = RB_HW_OPT_HAS_ATTINY,
+ .str = "has ATtiny\t",
+ }, {
+ .bit = RB_HW_OPT_NO_NAND,
+ .str = "no NAND\t\t",
+ }, {
+ .bit = RB_HW_OPT_HAS_LCD,
+ .str = "has LCD\t\t",
+ }, {
+ .bit = RB_HW_OPT_HAS_POE_OUT,
+ .str = "has POE out\t",
+ }, {
+ .bit = RB_HW_OPT_HAS_uSD,
+ .str = "has MicroSD\t",
+ }, {
+ .bit = RB_HW_OPT_HAS_SIM,
+ .str = "has SIM\t\t",
+ }, {
+ .bit = RB_HW_OPT_HAS_SFP,
+ .str = "has SFP\t\t",
+ }, {
+ .bit = RB_HW_OPT_HAS_WIFI,
+ .str = "has WiFi\t",
+ }, {
+ .bit = RB_HW_OPT_HAS_TS_FOR_ADC,
+ .str = "has TS ADC\t",
+ }, {
+ .bit = RB_HW_OPT_HAS_PLC,
+ .str = "has PLC\t\t",
+ },
+};
+
+static ssize_t hc_tag_show_string(const u8 *pld, u16 pld_len, char *buf)
+{
+ return snprintf(buf, pld_len+1, "%s\n", pld);
+}
+
+static ssize_t hc_tag_show_u32(const u8 *pld, u16 pld_len, char *buf)
+{
+ char *out = buf;
+ u32 data; // cpu-endian
+
+ /* Caller ensures pld_len > 0 */
+ if (pld_len % sizeof(data))
+ return -EINVAL;
+
+ data = *(u32 *)pld;
+
+ do {
+ out += sprintf(out, "0x%08x\n", data);
+ data++;
+ } while ((pld_len -= sizeof(data)));
+
+ return out - buf;
+}
+
+/*
+ * The MAC is stored network-endian on all devices, in 2 32-bit segments:
+ * <XX:XX:XX:XX> <XX:XX:00:00>. Kernel print has us covered.
+ */
+static ssize_t hc_tag_show_mac(const u8 *pld, u16 pld_len, char *buf)
+{
+ if (8 != pld_len)
+ return -EINVAL;
+
+ return sprintf(buf, "%pM\n", pld);
+}
+
+/*
+ * Print HW options in a human readable way:
+ * The raw number and in decoded form
+ */
+static ssize_t hc_tag_show_hwoptions(const u8 *pld, u16 pld_len, char *buf)
+{
+ char *out = buf;
+ u32 data; // cpu-endian
+ int i;
+
+ if (sizeof(data) != pld_len)
+ return -EINVAL;
+
+ data = *(u32 *)pld;
+ out += sprintf(out, "raw\t\t: 0x%08x\n\n", data);
+
+ for (i = 0; i < ARRAY_SIZE(hc_hwopts); i++)
+ out += sprintf(out, "%s: %s\n", hc_hwopts[i].str,
+ (data & hc_hwopts[i].bit) ? "true" : "false");
+
+ return out - buf;
+}
+
+static ssize_t hc_wlan_data_bin_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count);
+
+static struct hc_wlan_attr {
+ struct bin_attribute battr;
+ u16 pld_ofs;
+ u16 pld_len;
+} hc_wlandata_battr = {
+ .battr = __BIN_ATTR(wlan_data, S_IRUSR, hc_wlan_data_bin_read, NULL, 0),
+};
+
+static ssize_t hc_attr_show(struct kobject *kobj, struct kobj_attribute *attr,
+ char *buf);
+
+/* Array of known tags to publish in sysfs */
+static struct hc_attr {
+ const u16 tag_id;
+ ssize_t (* const tshow)(const u8 *pld, u16 pld_len, char *buf);
+ struct kobj_attribute kattr;
+ u16 pld_ofs;
+ u16 pld_len;
+} hc_attrs[] = {
+ {
+ .tag_id = RB_ID_FLASH_INFO,
+ .tshow = hc_tag_show_u32,
+ .kattr = __ATTR(flash_info, S_IRUSR, hc_attr_show, NULL),
+ }, {
+ .tag_id = RB_ID_MAC_ADDRESS_PACK,
+ .tshow = hc_tag_show_mac,
+ .kattr = __ATTR(mac_base, S_IRUSR, hc_attr_show, NULL),
+ }, {
+ .tag_id = RB_ID_BOARD_PRODUCT_CODE,
+ .tshow = hc_tag_show_string,
+ .kattr = __ATTR(board_product_code, S_IRUSR, hc_attr_show, NULL),
+ }, {
+ .tag_id = RB_ID_BIOS_VERSION,
+ .tshow = hc_tag_show_string,
+ .kattr = __ATTR(booter_version, S_IRUSR, hc_attr_show, NULL),
+ }, {
+ .tag_id = RB_ID_SERIAL_NUMBER,
+ .tshow = hc_tag_show_string,
+ .kattr = __ATTR(board_serial, S_IRUSR, hc_attr_show, NULL),
+ }, {
+ .tag_id = RB_ID_MEMORY_SIZE,
+ .tshow = hc_tag_show_u32,
+ .kattr = __ATTR(mem_size, S_IRUSR, hc_attr_show, NULL),
+ }, {
+ .tag_id = RB_ID_MAC_ADDRESS_COUNT,
+ .tshow = hc_tag_show_u32,
+ .kattr = __ATTR(mac_count, S_IRUSR, hc_attr_show, NULL),
+ }, {
+ .tag_id = RB_ID_HW_OPTIONS,
+ .tshow = hc_tag_show_hwoptions,
+ .kattr = __ATTR(hw_options, S_IRUSR, hc_attr_show, NULL),
+ }, {
+ .tag_id = RB_ID_WLAN_DATA,
+ .tshow = NULL,
+ }, {
+ .tag_id = RB_ID_BOARD_IDENTIFIER,
+ .tshow = hc_tag_show_string,
+ .kattr = __ATTR(board_identifier, S_IRUSR, hc_attr_show, NULL),
+ }, {
+ .tag_id = RB_ID_PRODUCT_NAME,
+ .tshow = hc_tag_show_string,
+ .kattr = __ATTR(product_name, S_IRUSR, hc_attr_show, NULL),
+ }, {
+ .tag_id = RB_ID_DEFCONF,
+ .tshow = hc_tag_show_string,
+ .kattr = __ATTR(defconf, S_IRUSR, hc_attr_show, NULL),
+ }
+};
+
+/*
+ * If the RB_ID_WLAN_DATA payload starts with RB_MAGIC_ERD, then past
+ * that magic number the payload itself contains a routerboot tag node
+ * locating the LZO-compressed calibration data at id 0x1.
+ */
+static int hc_wlan_data_unpack_erd(const u8 *inbuf, size_t inlen,
+ void *outbuf, size_t *outlen)
+{
+ u16 lzo_ofs, lzo_len;
+ int ret;
+
+ /* Find embedded tag */
+ ret = routerboot_tag_find(inbuf, inlen, 0x1, // always id 1
+ &lzo_ofs, &lzo_len);
+ if (ret) {
+ pr_debug(RB_HC_PR_PFX "ERD data not found\n");
+ goto fail;
+ }
+
+ if (lzo_len > inlen) {
+ pr_debug(RB_HC_PR_PFX "Invalid ERD data length\n");
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ ret = lzo1x_decompress_safe(inbuf+lzo_ofs, lzo_len, outbuf, outlen);
+ if (ret)
+ pr_debug(RB_HC_PR_PFX "LZO decompression error (%d)\n", ret);
+
+fail:
+ return ret;
+}
+
+static int hc_wlan_data_unpack(const size_t tofs, size_t tlen,
+ void *outbuf, size_t *outlen)
+{
+ const u8 *lbuf;
+ u32 magic;
+ int ret;
+
+ /* Caller ensure tlen > 0. tofs is aligned */
+ if ((tofs + tlen) > hc_buflen)
+ return -EIO;
+
+ lbuf = hc_buf + tofs;
+ magic = *(u32 *)lbuf;
+
+ ret = -ENODATA;
+ switch (magic) {
+ case RB_MAGIC_ERD:
+ /* Skip magic */
+ lbuf += sizeof(magic);
+ tlen -= sizeof(magic);
+ ret = hc_wlan_data_unpack_erd(lbuf, tlen, outbuf, outlen);
+ break;
+ default:
+ /*
+ * If the RB_ID_WLAN_DATA payload doesn't start with a
+ * magic number, the payload itself is the raw RLE-encoded
+ * calibration data.
+ */
+ ret = routerboot_rle_decode(lbuf, tlen, outbuf, outlen);
+ if (ret)
+ pr_debug(RB_HC_PR_PFX "RLE decoding error (%d)\n", ret);
+ break;
+ }
+
+ return ret;
+}
+
+static ssize_t hc_attr_show(struct kobject *kobj, struct kobj_attribute *attr,
+ char *buf)
+{
+ struct hc_attr *hc_attr;
+ const u8 *pld;
+ u16 pld_len;
+
+ hc_attr = container_of(attr, typeof(*hc_attr), kattr);
+
+ if (!hc_attr->pld_len)
+ return -ENOENT;
+
+ pld = hc_buf + hc_attr->pld_ofs;
+ pld_len = hc_attr->pld_len;
+
+ return hc_attr->tshow(pld, pld_len, buf);
+}
+
+/*
+ * This function will allocate and free memory every time it is called. This
+ * is not the fastest way to do this, but since the data is rarely read (mainly
+ * at boot time to load wlan caldata), this makes it possible to save memory for
+ * the system.
+ */
+static ssize_t hc_wlan_data_bin_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count)
+{
+ struct hc_wlan_attr *hc_wattr;
+ size_t outlen;
+ void *outbuf;
+ int ret;
+
+ hc_wattr = container_of(attr, typeof(*hc_wattr), battr);
+
+ if (!hc_wattr->pld_len)
+ return -ENOENT;
+
+ outlen = RB_ART_SIZE;
+
+ /* Don't bother unpacking if the source is already too large */
+ if (hc_wattr->pld_len > outlen)
+ return -EFBIG;
+
+ outbuf = kmalloc(outlen, GFP_KERNEL);
+ if (!outbuf)
+ return -ENOMEM;
+
+ ret = hc_wlan_data_unpack(hc_wattr->pld_ofs, hc_wattr->pld_len, outbuf, &outlen);
+ if (ret) {
+ kfree(outbuf);
+ return ret;
+ }
+
+ if (off >= outlen) {
+ kfree(outbuf);
+ return 0;
+ }
+
+ if (off + count > outlen)
+ count = outlen - off;
+
+ memcpy(buf, outbuf + off, count);
+
+ kfree(outbuf);
+ return count;
+}
+
+int __init rb_hardconfig_init(struct kobject *rb_kobj)
+{
+ struct mtd_info *mtd;
+ size_t bytes_read, buflen;
+ const u8 *buf;
+ int i, ret;
+ u32 magic;
+
+ // TODO allow override
+ mtd = get_mtd_device_nm(RB_MTD_HARD_CONFIG);
+ if (IS_ERR(mtd))
+ return -ENODEV;
+
+ hc_buflen = mtd->size;
+ hc_buf = kmalloc(hc_buflen, GFP_KERNEL);
+ if (!hc_buf)
+ return -ENOMEM;
+
+ ret = mtd_read(mtd, 0, hc_buflen, &bytes_read, hc_buf);
+
+ if (bytes_read != hc_buflen) {
+ ret = -EIO;
+ goto fail;
+ }
+
+ /* Check we have what we expect */
+ magic = *(const u32 *)hc_buf;
+ if (RB_MAGIC_HARD != magic) {
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ /* Skip magic */
+ buf = hc_buf + sizeof(magic);
+ buflen = hc_buflen - sizeof(magic);
+
+ /* Populate sysfs */
+ ret = -ENOMEM;
+ hc_kobj = kobject_create_and_add(RB_MTD_HARD_CONFIG, rb_kobj);
+ if (!hc_kobj)
+ goto fail;
+
+ /* Locate and publish all known tags */
+ for (i = 0; i < ARRAY_SIZE(hc_attrs); i++) {
+ ret = routerboot_tag_find(buf, buflen, hc_attrs[i].tag_id,
+ &hc_attrs[i].pld_ofs, &hc_attrs[i].pld_len);
+ if (ret) {
+ hc_attrs[i].pld_ofs = hc_attrs[i].pld_len = 0;
+ continue;
+ }
+
+ /* Account for skipped magic */
+ hc_attrs[i].pld_ofs += sizeof(magic);
+
+ /* Special case RB_ID_WLAN_DATA to prep and create the binary attribute */
+ if ((RB_ID_WLAN_DATA == hc_attrs[i].tag_id) && hc_attrs[i].pld_len) {
+ hc_wlandata_battr.pld_ofs = hc_attrs[i].pld_ofs;
+ hc_wlandata_battr.pld_len = hc_attrs[i].pld_len;
+
+ ret = sysfs_create_bin_file(hc_kobj, &hc_wlandata_battr.battr);
+ if (ret)
+ pr_err(RB_HC_PR_PFX "Could not create %s sysfs entry (%d)\n",
+ hc_wlandata_battr.battr.attr.name, ret);
+ }
+ /* All other tags are published via standard attributes */
+ else {
+ ret = sysfs_create_file(hc_kobj, &hc_attrs[i].kattr.attr);
+ if (ret)
+ pr_err(RB_HC_PR_PFX "Could not create %s sysfs entry (%d)\n",
+ hc_attrs[i].kattr.attr.name, ret);
+ }
+ }
+
+ pr_info("MikroTik RouterBOARD hardware configuration sysfs driver v" RB_HARDCONFIG_VER "\n");
+
+ return 0;
+
+fail:
+ kfree(hc_buf);
+ return ret;
+}
+
+void __exit rb_hardconfig_exit(void)
+{
+ kobject_put(hc_kobj);
+ kfree(hc_buf);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for MikroTik RouterBoot flash data. Common routines.
+ *
+ * Copyright (C) 2020 Thibaut VARÈNE <hacks+kernel@slashdirt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sysfs.h>
+
+#include "routerboot.h"
+
+static struct kobject *rb_kobj;
+
+/**
+ * routerboot_tag_find() - Locate a given tag in routerboot config data.
+ * @bufhead: the buffer to look into. Must start with a tag node.
+ * @buflen: size of bufhead
+ * @tag_id: the tag identifier to look for
+ * @pld_ofs: will be updated with tag payload offset in bufhead, if tag found
+ * @pld_len: will be updated with tag payload size, if tag found
+ *
+ * This incarnation of tag_find() does only that: it finds a specific routerboot
+ * tag node in the input buffer. Routerboot tag nodes are u32 values:
+ * - The low nibble is the tag identification number,
+ * - The high nibble is the tag payload length (node excluded) in bytes.
+ * The payload immediately follows the tag node. Tag nodes are 32bit-aligned.
+ * The returned pld_ofs will always be aligned. pld_len may not end on 32bit
+ * boundary (the only known case is when parsing ERD data).
+ * The nodes are cpu-endian on the flash media. The payload is cpu-endian when
+ * applicable. Tag nodes are not ordered (by ID) on flash.
+ *
+ * Return: 0 on success (tag found) or errno
+ */
+int routerboot_tag_find(const u8 *bufhead, const size_t buflen, const u16 tag_id,
+ u16 *pld_ofs, u16 *pld_len)
+{
+ const u32 *datum, *bufend;
+ u32 node;
+ u16 id, len;
+ int ret;
+
+ if (!bufhead || !tag_id)
+ return -EINVAL;
+
+ ret = -ENOENT;
+ datum = (const u32 *)bufhead;
+ bufend = (const u32 *)(bufhead + buflen);
+
+ while (datum < bufend) {
+ node = *datum++;
+
+ /* Tag list ends with null node */
+ if (!node)
+ break;
+
+ id = node & 0xFFFF;
+ len = node >> 16;
+
+ if (tag_id == id) {
+ if (datum >= bufend)
+ break;
+
+ if (pld_ofs)
+ *pld_ofs = (u16)((u8 *)datum - bufhead);
+ if (pld_len)
+ *pld_len = len;
+
+ ret = 0;
+ break;
+ }
+
+ /*
+ * The only known situation where len may not end on 32bit
+ * boundary is within ERD data. Since we're only extracting
+ * one tag (the first and only one) from that data, we should
+ * never need to forcefully ALIGN(). Do it anyway, this is not a
+ * performance path.
+ */
+ len = ALIGN(len, sizeof(*datum));
+ datum += len / sizeof(*datum);
+ }
+
+ return ret;
+}
+
+/**
+ * routerboot_rle_decode() - Simple RLE (MikroTik variant) decoding routine.
+ * @in: input buffer to decode
+ * @inlen: size of in
+ * @out: output buffer to write decoded data to
+ * @outlen: pointer to out size when function is called, will be updated with
+ * size of decoded output on return
+ *
+ * MikroTik's variant of RLE operates as follows, considering a signed run byte:
+ * - positive run => classic RLE
+ * - negative run => the next -<run> bytes must be copied verbatim
+ * The API is matched to the lzo1x routines for convenience.
+ *
+ * NB: The output buffer cannot overlap with the input buffer.
+ *
+ * Return: 0 on success or errno
+ */
+int routerboot_rle_decode(const u8 *in, size_t inlen, u8 *out, size_t *outlen)
+{
+ int ret, run, nbytes; // use native types for speed
+ u8 byte;
+
+ if (!in || (inlen < 2) || !out)
+ return -EINVAL;
+
+ ret = -ENOSPC;
+ nbytes = 0;
+ while (inlen >= 2) {
+ run = *in++;
+ inlen--;
+
+ /* Verbatim copies */
+ if (run & 0x80) {
+ /* Invert run byte sign */
+ run = ~run & 0xFF;
+ run++;
+
+ if (run > inlen)
+ goto fail;
+
+ inlen -= run;
+
+ nbytes += run;
+ if (nbytes > *outlen)
+ goto fail;
+
+ /* Basic memcpy */
+ while (run-- > 0)
+ *out++ = *in++;
+ }
+ /* Stream of half-words RLE: <run><byte>. run == 0 is ignored */
+ else {
+ byte = *in++;
+ inlen--;
+
+ nbytes += run;
+ if (nbytes > *outlen)
+ goto fail;
+
+ while (run-- > 0)
+ *out++ = byte;
+ }
+ }
+
+ ret = 0;
+fail:
+ *outlen = nbytes;
+ return ret;
+}
+
+static int __init routerboot_init(void)
+{
+ rb_kobj = kobject_create_and_add("mikrotik", firmware_kobj);
+ if (!rb_kobj)
+ return -ENOMEM;
+
+ return rb_hardconfig_init(rb_kobj);
+}
+
+static void __exit routerboot_exit(void)
+{
+ rb_hardconfig_exit();
+ kobject_put(rb_kobj); // recursive afaict
+}
+
+module_init(routerboot_init);
+module_exit(routerboot_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MikroTik RouterBoot sysfs support");
+MODULE_AUTHOR("Thibaut VARENE");
projects / openwrt / staging / luka.git / commitdiff