--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+#include "ipq8074-ess.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Netgear WAX630";
+ compatible = "netgear,wax630", "qcom,ipq8074";
+
+ aliases {
+ serial0 = &blsp1_uart5;
+
+ ethernet0 = &dp6_syn;
+ ethernet1 = &dp4;
+ label-mac-device = &dp6_syn;
+
+ led-boot = &led_system_blue;
+ led-failsafe = &led_system_red;
+ led-running = &led_system_green;
+ led-upgrade = &led_system_blue;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs-append = " root=/dev/ubiblock0_1";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ led-spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
+
+ led_gpio: led-gpio@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <1>;
+ enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system_red: system-red {
+ label = "system:red";
+ gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led_system_green: system-green {
+ label = "system:green";
+ gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led_system_blue: system-blue {
+ label = "system:blue";
+ gpios = <&tlmm 21 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ lan1-green {
+ label = "lan1:green";
+ gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ lan1-orange {
+ label = "lan1:orange";
+ gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ lan2-green {
+ label = "lan2:green";
+ gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ lan2-orange {
+ label = "lan2:orange";
+ gpios = <&tlmm 60 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ 2g-blue {
+ label = "wlan2g:blue";
+ gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ 2g-green {
+ label = "wlan2g:green";
+ gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ 5g-low-blue {
+ label = "wlan5g_low:blue";
+ gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ 5g-low-green {
+ label = "wlan5g_low:green";
+ gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ 5g-high-blue {
+ label = "wlan5g_high:blue";
+ gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ 5g-high-green {
+ label = "wlan5g_high:green";
+ gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ };
+};
+
+&edma {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+
+ switch_cpu_bmp = <0x01>;
+ switch_lan_bmp = <0x3e>;
+ switch_wan_bmp = <0x40>;
+ switch_mac_mode = <0x00>;
+ switch_mac_mode1 = <0xff>;
+ switch_mac_mode2 = <0x0d>;
+ bm_tick_mode = <0x00>;
+ tm_tick_mode = <0x00>;
+
+ qcom,port_phyinfo {
+ port@3 {
+ port_id = <4>;
+ phy_address = <3>;
+ };
+
+ port@5 {
+ port_id = <6>;
+ phy_address = <28>;
+ port_mac_sel = "QGMAC_PORT";
+ };
+ };
+};
+
+&tlmm {
+ mdio_pins: mdio-pins {
+ mdc {
+ pins = "gpio68";
+ function = "mdc";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ mdio {
+ pins = "gpio69";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+
+ qca8075: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ };
+
+ qca8081: ethernet-phy@28 {
+ compatible = "ethernet-phy-id004d.d101";
+ reg = <28>;
+ reset-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&dp4 {
+ status = "okay";
+ phy-handle = <&qca8075>;
+ label = "lan2";
+};
+
+&dp6_syn {
+ status = "okay";
+ phy-handle = <&qca8081>;
+ label = "lan1";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&qpic_nand {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+ };
+};
+
+&blsp1_uart5 {
+ status = "okay";
+};
+
+&wifi {
+ status = "okay";
+
+ qcom,ath11k-calibration-variant = "Netgear-WAX630";
+};
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
+define Build/wax6xx-netgear-tar
+ mkdir $@.tmp
+ mv $@ $@.tmp/nand-ipq807x-apps.img
+ md5sum $@.tmp/nand-ipq807x-apps.img | cut -c 1-32 > $@.tmp/nand-ipq807x-apps.md5sum
+ echo $(DEVICE_MODEL) > $@.tmp/metadata.txt
+ echo $(DEVICE_MODEL)"_V9.9.9.9" > $@.tmp/version
+ tar -C $@.tmp/ -cf $@ .
+ rm -rf $@.tmp
+endef
+
define Device/buffalo_wxr-5950ax12
$(call Device/FitImage)
DEVICE_VENDOR := Buffalo
endef
TARGET_DEVICES += netgear_wax620
+define Device/netgear_wax630
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Netgear
+ DEVICE_MODEL := WAX630
+ DEVICE_DTS_CONFIG := config@hk01
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ SOC := ipq8074
+ IMAGES := ui-factory.tar factory.ubi sysupgrade.bin
+ IMAGE/ui-factory.tar := append-ubi | wax6xx-netgear-tar
+ DEVICE_PACKAGES += kmod-spi-gpio ipq-wifi-netgear_wax630
+endef
+TARGET_DEVICES += netgear_wax630
+
define Device/prpl_haze
$(call Device/FitImage)
$(call Device/EmmcImage)
projects / openwrt / staging / stintel.git / commitdiff