--- /dev/null
+/*
+ * Atheros AP132 reference board support
+ *
+ * Copyright (c) 2012 Qualcomm Atheros
+ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2013 Embedded Wireless GmbH <info@embeddedwireless.de>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define AP132_GPIO_LED_USB 4
+#define AP132_GPIO_LED_WLAN_5G 12
+#define AP132_GPIO_LED_WLAN_2G 13
+#define AP132_GPIO_LED_STATUS_RED 14
+#define AP132_GPIO_LED_WPS_RED 15
+
+#define AP132_GPIO_BTN_WPS 16
+
+#define AP132_KEYS_POLL_INTERVAL 20 /* msecs */
+#define AP132_KEYS_DEBOUNCE_INTERVAL (3 * AP132_KEYS_POLL_INTERVAL)
+
+#define AP132_MAC0_OFFSET 0
+#define AP132_WMAC_CALDATA_OFFSET 0x1000
+
+static struct gpio_led ap132_leds_gpio[] __initdata = {
+ {
+ .name = "ap132:red:status",
+ .gpio = AP132_GPIO_LED_STATUS_RED,
+ .active_low = 1,
+ },
+ {
+ .name = "ap132:red:wps",
+ .gpio = AP132_GPIO_LED_WPS_RED,
+ .active_low = 1,
+ },
+ {
+ .name = "ap132:red:wlan-2g",
+ .gpio = AP132_GPIO_LED_WLAN_2G,
+ .active_low = 1,
+ },
+ {
+ .name = "ap132:red:usb",
+ .gpio = AP132_GPIO_LED_USB,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button ap132_gpio_keys[] __initdata = {
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AP132_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP132_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct ar8327_pad_cfg ap132_ar8327_pad0_cfg;
+
+static struct ar8327_platform_data ap132_ar8327_data = {
+ .pad0_cfg = &ap132_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info ap132_mdio1_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.1",
+ .phy_addr = 0,
+ .platform_data = &ap132_ar8327_data,
+ },
+};
+
+static void __init ap132_mdio_setup(void)
+{
+ void __iomem *base;
+ u32 t;
+
+#define GPIO_IN_ENABLE3_ADDRESS 0x0050
+#define GPIO_IN_ENABLE3_MII_GE1_MDI_MASK 0x00ff0000
+#define GPIO_IN_ENABLE3_MII_GE1_MDI_LSB 16
+#define GPIO_IN_ENABLE3_MII_GE1_MDI_SET(x) (((x) << GPIO_IN_ENABLE3_MII_GE1_MDI_LSB) & GPIO_IN_ENABLE3_MII_GE1_MDI_MASK)
+#define GPIO_OUT_FUNCTION4_ADDRESS 0x003c
+#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK 0xff000000
+#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_LSB 24
+#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_SET(x) (((x) << GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_LSB) & GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK)
+#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK 0x0000ff00
+#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_LSB 8
+#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_SET(x) (((x) << GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_LSB) & GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK)
+
+ base = ioremap(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
+
+ t = __raw_readl(base + GPIO_IN_ENABLE3_ADDRESS);
+ t &= ~GPIO_IN_ENABLE3_MII_GE1_MDI_MASK;
+ t |= GPIO_IN_ENABLE3_MII_GE1_MDI_SET(19);
+ __raw_writel(t, base + GPIO_IN_ENABLE3_ADDRESS);
+
+
+ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << 19), base + AR71XX_GPIO_REG_OE);
+
+ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << 17), base + AR71XX_GPIO_REG_OE);
+
+
+ t = __raw_readl(base + GPIO_OUT_FUNCTION4_ADDRESS);
+ t &= ~(GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK | GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK);
+ t |= GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_SET(0x20) | GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_SET(0x21);
+ __raw_writel(t, base + GPIO_OUT_FUNCTION4_ADDRESS);
+
+ iounmap(base);
+
+}
+
+static void __init ap132_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap132_leds_gpio),
+ ap132_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, AP132_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap132_gpio_keys),
+ ap132_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_register_wmac(art + AP132_WMAC_CALDATA_OFFSET, NULL);
+
+ /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
+ ap132_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
+ ap132_ar8327_pad0_cfg.sgmii_delay_en = true;
+
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+ ap132_mdio_setup();
+
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, art + AP132_MAC0_OFFSET, 0);
+
+ mdiobus_register_board_info(ap132_mdio1_info,
+ ARRAY_SIZE(ap132_mdio1_info));
+
+ /* GMAC1 is connected to the SGMII interface */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_data.phy_mask = BIT(0);
+ ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
+
+ ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_AP132, "AP132",
+ "Atheros AP132 reference board",
+ ap132_setup);
+
--- /dev/null
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -70,6 +70,18 @@ config ATH79_MACH_AP121
+ Say 'Y' here if you want your kernel to support the
+ Atheros AP121 reference board.
+
++config ATH79_MACH_AP132
++ bool "Atheros AP132 reference board"
++ select SOC_QCA955X
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_SPI
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++ help
++ Say 'Y' here if you want your kernel to support the
++ Atheros AP132 reference boards.
++
+ config ATH79_MACH_AP136
+ bool "Atheros AP136/AP135 reference board"
+ select SOC_QCA955X
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -24,6 +24,7 @@ enum ath79_mach_type {
+ ATH79_MACH_AP113, /* Atheros AP113 reference board */
+ ATH79_MACH_AP121, /* Atheros AP121 reference board */
+ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
++ ATH79_MACH_AP132, /* Atheros AP132 reference board */
+ ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */
+ ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
+ ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -44,6 +44,7 @@ obj-$(CONFIG_ATH79_MACH_ALL0258N) += mac
+ obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o
+ obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o
+ obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
++obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o
+ obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
+ obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
+ obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
projects / openwrt / staging / kaloz.git / commitdiff