* @cq: pointer to the specific Control queue
*
* This is the main initialization routine for the Control Send Queue
- * Prior to calling this function, drivers *MUST* set the following fields
+ * Prior to calling this function, the driver *MUST* set the following fields
* in the cq->structure:
* - cq->num_sq_entries
* - cq->sq_buf_size
* @cq: pointer to the specific Control queue
*
* The main initialization routine for the Admin Receive (Event) Queue.
- * Prior to calling this function, drivers *MUST* set the following fields
+ * Prior to calling this function, the driver *MUST* set the following fields
* in the cq->structure:
* - cq->num_rq_entries
* - cq->rq_buf_size
return 0;
init_ctrlq_free_rq:
- if (cq->rq.count) {
- ice_shutdown_rq(hw, cq);
- mutex_destroy(&cq->rq_lock);
- }
- if (cq->sq.count) {
- ice_shutdown_sq(hw, cq);
- mutex_destroy(&cq->sq_lock);
- }
+ ice_shutdown_rq(hw, cq);
+ ice_shutdown_sq(hw, cq);
return status;
}
* @hw: pointer to the hardware structure
* @q_type: specific Control queue type
*
- * Prior to calling this function, drivers *MUST* set the following fields
+ * Prior to calling this function, the driver *MUST* set the following fields
* in the cq->structure:
* - cq->num_sq_entries
* - cq->num_rq_entries
* - cq->rq_buf_size
* - cq->sq_buf_size
+ *
+ * NOTE: this function does not initialize the controlq locks
*/
static enum ice_status ice_init_ctrlq(struct ice_hw *hw, enum ice_ctl_q q_type)
{
!cq->rq_buf_size || !cq->sq_buf_size) {
return ICE_ERR_CFG;
}
- mutex_init(&cq->sq_lock);
- mutex_init(&cq->rq_lock);
/* setup SQ command write back timeout */
cq->sq_cmd_timeout = ICE_CTL_Q_SQ_CMD_TIMEOUT;
/* allocate the ATQ */
ret_code = ice_init_sq(hw, cq);
if (ret_code)
- goto init_ctrlq_destroy_locks;
+ return ret_code;
/* allocate the ARQ */
ret_code = ice_init_rq(hw, cq);
init_ctrlq_free_sq:
ice_shutdown_sq(hw, cq);
-init_ctrlq_destroy_locks:
- mutex_destroy(&cq->sq_lock);
- mutex_destroy(&cq->rq_lock);
return ret_code;
}
* ice_init_all_ctrlq - main initialization routine for all control queues
* @hw: pointer to the hardware structure
*
- * Prior to calling this function, drivers *MUST* set the following fields
+ * Prior to calling this function, the driver MUST* set the following fields
* in the cq->structure for all control queues:
* - cq->num_sq_entries
* - cq->num_rq_entries
* - cq->rq_buf_size
* - cq->sq_buf_size
+ *
+ * NOTE: this function does not initialize the controlq locks.
*/
enum ice_status ice_init_all_ctrlq(struct ice_hw *hw)
{
return ice_init_ctrlq(hw, ICE_CTL_Q_MAILBOX);
}
+/**
+ * ice_init_ctrlq_locks - Initialize locks for a control queue
+ * @cq: pointer to the control queue
+ *
+ * Initializes the send and receive queue locks for a given control queue.
+ */
+static void ice_init_ctrlq_locks(struct ice_ctl_q_info *cq)
+{
+ mutex_init(&cq->sq_lock);
+ mutex_init(&cq->rq_lock);
+}
+
+/**
+ * ice_create_all_ctrlq - main initialization routine for all control queues
+ * @hw: pointer to the hardware structure
+ *
+ * Prior to calling this function, the driver *MUST* set the following fields
+ * in the cq->structure for all control queues:
+ * - cq->num_sq_entries
+ * - cq->num_rq_entries
+ * - cq->rq_buf_size
+ * - cq->sq_buf_size
+ *
+ * This function creates all the control queue locks and then calls
+ * ice_init_all_ctrlq. It should be called once during driver load. If the
+ * driver needs to re-initialize control queues at run time it should call
+ * ice_init_all_ctrlq instead.
+ */
+enum ice_status ice_create_all_ctrlq(struct ice_hw *hw)
+{
+ ice_init_ctrlq_locks(&hw->adminq);
+ ice_init_ctrlq_locks(&hw->mailboxq);
+
+ return ice_init_all_ctrlq(hw);
+}
+
/**
* ice_shutdown_ctrlq - shutdown routine for any control queue
* @hw: pointer to the hardware structure
* @q_type: specific Control queue type
+ *
+ * NOTE: this function does not destroy the control queue locks.
*/
static void ice_shutdown_ctrlq(struct ice_hw *hw, enum ice_ctl_q q_type)
{
return;
}
- if (cq->sq.count) {
- ice_shutdown_sq(hw, cq);
- mutex_destroy(&cq->sq_lock);
- }
- if (cq->rq.count) {
- ice_shutdown_rq(hw, cq);
- mutex_destroy(&cq->rq_lock);
- }
+ ice_shutdown_sq(hw, cq);
+ ice_shutdown_rq(hw, cq);
}
/**
* ice_shutdown_all_ctrlq - shutdown routine for all control queues
* @hw: pointer to the hardware structure
+ *
+ * NOTE: this function does not destroy the control queue locks. The driver
+ * may call this at runtime to shutdown and later restart control queues, such
+ * as in response to a reset event.
*/
void ice_shutdown_all_ctrlq(struct ice_hw *hw)
{
ice_shutdown_ctrlq(hw, ICE_CTL_Q_MAILBOX);
}
+/**
+ * ice_destroy_ctrlq_locks - Destroy locks for a control queue
+ * @cq: pointer to the control queue
+ *
+ * Destroys the send and receive queue locks for a given control queue.
+ */
+static void
+ice_destroy_ctrlq_locks(struct ice_ctl_q_info *cq)
+{
+ mutex_destroy(&cq->sq_lock);
+ mutex_destroy(&cq->rq_lock);
+}
+
+/**
+ * ice_destroy_all_ctrlq - exit routine for all control queues
+ * @hw: pointer to the hardware structure
+ *
+ * This function shuts down all the control queues and then destroys the
+ * control queue locks. It should be called once during driver unload. The
+ * driver should call ice_shutdown_all_ctrlq if it needs to shut down and
+ * reinitialize control queues, such as in response to a reset event.
+ */
+void ice_destroy_all_ctrlq(struct ice_hw *hw)
+{
+ /* shut down all the control queues first */
+ ice_shutdown_all_ctrlq(hw);
+
+ ice_destroy_ctrlq_locks(&hw->adminq);
+ ice_destroy_ctrlq_locks(&hw->mailboxq);
+}
+
/**
* ice_clean_sq - cleans Admin send queue (ATQ)
* @hw: pointer to the hardware structure