#include <asm/io.h>
#include <dm.h>
#include "ehci.h"
+#include <power/regulator.h>
/*
* Even though here we don't explicitly use "struct ehci_ctrl"
struct clk *clocks;
struct reset_ctl *resets;
struct phy phy;
+#ifdef CONFIG_DM_REGULATOR
+ struct udevice *vbus_supply;
+#endif
int clock_count;
int reset_count;
};
+#ifdef CONFIG_DM_REGULATOR
+static int ehci_enable_vbus_supply(struct udevice *dev)
+{
+ struct generic_ehci *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = device_get_supply_regulator(dev, "vbus-supply",
+ &priv->vbus_supply);
+ if (ret && ret != -ENOENT)
+ return ret;
+
+ if (priv->vbus_supply) {
+ ret = regulator_set_enable(priv->vbus_supply, true);
+ if (ret) {
+ dev_err(dev, "Error enabling VBUS supply\n");
+ return ret;
+ }
+ } else {
+ dev_dbg(dev, "No vbus supply\n");
+ }
+
+ return 0;
+}
+
+static int ehci_disable_vbus_supply(struct generic_ehci *priv)
+{
+ if (priv->vbus_supply)
+ return regulator_set_enable(priv->vbus_supply, false);
+ else
+ return 0;
+}
+#else
+static int ehci_enable_vbus_supply(struct udevice *dev)
+{
+ return 0;
+}
+
+static int ehci_disable_vbus_supply(struct generic_ehci *priv)
+{
+ return 0;
+}
+#endif
+
static int ehci_usb_probe(struct udevice *dev)
{
struct generic_ehci *priv = dev_get_priv(dev);
}
}
- err = ehci_setup_phy(dev, &priv->phy, 0);
+ err = ehci_enable_vbus_supply(dev);
if (err)
goto reset_err;
+ err = ehci_setup_phy(dev, &priv->phy, 0);
+ if (err)
+ goto regulator_err;
+
hccr = map_physmem(dev_read_addr(dev), 0x100, MAP_NOCACHE);
hcor = (struct ehci_hcor *)((uintptr_t)hccr +
HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
if (ret)
dev_err(dev, "failed to shutdown usb phy\n");
+regulator_err:
+ ret = ehci_disable_vbus_supply(priv);
+ if (ret)
+ dev_err(dev, "failed to disable VBUS supply\n");
+
reset_err:
ret = reset_release_all(priv->resets, priv->reset_count);
if (ret)
if (ret)
return ret;
+ ret = ehci_disable_vbus_supply(priv);
+ if (ret)
+ return ret;
+
ret = reset_release_all(priv->resets, priv->reset_count);
if (ret)
return ret;