-LINUX_VERSION-6.6 = .23
-LINUX_KERNEL_HASH-6.6.23 = 200fd119cb9ef06bcedcdb52be00ba443163eab154295c5831fed9a12211a8b9
+LINUX_VERSION-6.6 = .24
+LINUX_KERNEL_HASH-6.6.24 = 3e9ef879dae8319338eb0dc2d2c2025c13257fdeddf6245c000cb5a85a8af6f5
imx_ocotp_nvmem_config.priv = priv;
--- a/drivers/nvmem/meson-efuse.c
+++ b/drivers/nvmem/meson-efuse.c
-@@ -93,6 +93,7 @@ static int meson_efuse_probe(struct plat
+@@ -74,6 +74,7 @@ static int meson_efuse_probe(struct plat
econfig->dev = dev;
econfig->name = dev_name(dev);
+++ /dev/null
-From 12ce20e02e532f101b725d71c52a36c5cc8ad1e6 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Sun, 4 Feb 2024 00:54:01 +0100
-Subject: [PATCH] leds: trigger: netdev: Fix kernel panic on interface rename
- trig notify
-
-Commit d5e01266e7f5 ("leds: trigger: netdev: add additional specific link
-speed mode") in the various changes, reworked the way to set the LINKUP
-mode in commit cee4bd16c319 ("leds: trigger: netdev: Recheck
-NETDEV_LED_MODE_LINKUP on dev rename") and moved it to a generic function.
-
-This changed the logic where, in the previous implementation the dev
-from the trigger event was used to check if the carrier was ok, but in
-the new implementation with the generic function, the dev in
-trigger_data is used instead.
-
-This is problematic and cause a possible kernel panic due to the fact
-that the dev in the trigger_data still reference the old one as the
-new one (passed from the trigger event) still has to be hold and saved
-in the trigger_data struct (done in the NETDEV_REGISTER case).
-
-On calling of get_device_state(), an invalid net_dev is used and this
-cause a kernel panic.
-
-To handle this correctly, move the call to get_device_state() after the
-new net_dev is correctly set in trigger_data (in the NETDEV_REGISTER
-case) and correctly parse the new dev.
-
-Fixes: d5e01266e7f5 ("leds: trigger: netdev: add additional specific link speed mode")
-Cc: stable@vger.kernel.org
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20240203235413.1146-1-ansuelsmth@gmail.com
-Signed-off-by: Lee Jones <lee@kernel.org>
----
- drivers/leds/trigger/ledtrig-netdev.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -489,12 +489,12 @@ static int netdev_trig_notify(struct not
- trigger_data->duplex = DUPLEX_UNKNOWN;
- switch (evt) {
- case NETDEV_CHANGENAME:
-- get_device_state(trigger_data);
-- fallthrough;
- case NETDEV_REGISTER:
- dev_put(trigger_data->net_dev);
- dev_hold(dev);
- trigger_data->net_dev = dev;
-+ if (evt == NETDEV_CHANGENAME)
-+ get_device_state(trigger_data);
- break;
- case NETDEV_UNREGISTER:
- dev_put(trigger_data->net_dev);
+++ /dev/null
-From: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
-
-E.g. ESMT chips will return an identification code with a length of 5
-bytes. In order to prevent ambiguity, flash chips would actually need to
-return IDs that are up to 17 or more bytes long due to JEDEC's
-continuation scheme. I understand that if a manufacturer ID is located
-in bank N of JEDEC's database (there are currently 16 banks), N - 1
-continuation codes (7Fh) need to be added to the identification code
-(comprising of manufacturer ID and device ID). However, most flash chip
-manufacturers don't seem to implement this (correctly).
-
-Signed-off-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
----
- include/linux/mtd/spinand.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/linux/mtd/spinand.h
-+++ b/include/linux/mtd/spinand.h
-@@ -169,7 +169,7 @@
- struct spinand_op;
- struct spinand_device;
-
--#define SPINAND_MAX_ID_LEN 4
-+#define SPINAND_MAX_ID_LEN 5
- /*
- * For erase, write and read operation, we got the following timings :
- * tBERS (erase) 1ms to 4ms
#define QUECTEL_VENDOR_ID 0x2c7c
/* These Quectel products use Quectel's vendor ID */
-@@ -1147,6 +1152,11 @@ static const struct usb_device_id option
+@@ -1152,6 +1157,11 @@ static const struct usb_device_id option
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000), /* SIMCom SIM5218 */
.driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) | NCTRL(3) | RSVD(4) },
/* Quectel products using Qualcomm vendor ID */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC15)},
{ USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC20),
-@@ -1188,6 +1198,11 @@ static const struct usb_device_id option
+@@ -1193,6 +1203,11 @@ static const struct usb_device_id option
.driver_info = ZLP },
{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
.driver_info = RSVD(4) },
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
-@@ -556,5 +556,8 @@ static __net_initdata struct pernet_oper
+@@ -557,5 +557,8 @@ static __net_initdata struct pernet_oper
int __init ip_misc_proc_init(void)
{
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
-@@ -2461,6 +2461,8 @@ static struct mmc_blk_data *mmc_blk_allo
+@@ -2463,6 +2463,8 @@ static struct mmc_blk_data *mmc_blk_allo
int area_type,
unsigned int part_type)
{
struct mmc_blk_data *md;
int devidx, ret;
char cap_str[10];
-@@ -2557,6 +2559,13 @@ static struct mmc_blk_data *mmc_blk_allo
+@@ -2559,6 +2561,13 @@ static struct mmc_blk_data *mmc_blk_allo
blk_queue_write_cache(md->queue.queue, cache_enabled, fua_enabled);
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
-@@ -2515,6 +2515,7 @@ static struct mmc_blk_data *mmc_blk_allo
+@@ -2517,6 +2517,7 @@ static struct mmc_blk_data *mmc_blk_allo
md->disk->major = MMC_BLOCK_MAJOR;
md->disk->minors = perdev_minors;
md->disk->first_minor = devidx * perdev_minors;
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
-@@ -8214,7 +8214,7 @@ static int nft_register_flowtable_net_ho
+@@ -8221,7 +8221,7 @@ static int nft_register_flowtable_net_ho
err = flowtable->data.type->setup(&flowtable->data,
hook->ops.dev,
FLOW_BLOCK_BIND);
/*
* Define if arch has non-standard setup. This is a _PCI_ standard
-@@ -874,6 +877,12 @@ struct ata_port {
+@@ -875,6 +878,12 @@ struct ata_port {
#ifdef CONFIG_ATA_ACPI
struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */
#endif
+#endif
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
-@@ -4627,6 +4627,9 @@ enum skb_ext_id {
+@@ -4637,6 +4637,9 @@ enum skb_ext_id {
#if IS_ENABLED(CONFIG_MCTP_FLOWS)
SKB_EXT_MCTP,
#endif
},
[PORT_NPCM] = {
.name = "Nuvoton 16550",
-@@ -2780,6 +2780,11 @@ serial8250_do_set_termios(struct uart_po
+@@ -2774,6 +2774,11 @@ serial8250_do_set_termios(struct uart_po
unsigned long flags;
unsigned int baud, quot, frac = 0;
+++ /dev/null
-From patchwork Thu Sep 7 11:20:18 2023
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Frank Wunderlich <linux@fw-web.de>
-X-Patchwork-Id: 13376356
-From: Frank Wunderlich <linux@fw-web.de>
-To: linux-mediatek@lists.infradead.org
-Subject: [PATCH] thermal/drivers/mediatek: Fix control buffer enablement on
- MT7896
-Date: Thu, 7 Sep 2023 13:20:18 +0200
-Message-Id: <20230907112018.52811-1-linux@fw-web.de>
-X-Mailer: git-send-email 2.34.1
-MIME-Version: 1.0
-X-Mail-ID: e7eeb8e1-00de-41f6-a5df-ce2e9164136e
-X-BeenThere: linux-mediatek@lists.infradead.org
-X-Mailman-Version: 2.1.34
-Precedence: list
-List-Id: <linux-mediatek.lists.infradead.org>
-Cc: Daniel Lezcano <daniel.lezcano@linaro.org>,
- "Rafael J. Wysocki" <rafael@kernel.org>, linux-pm@vger.kernel.org,
- Amit Kucheria <amitk@kernel.org>, Daniel Golle <daniel@makrotopia.org>,
- stable@vger.kernel.org, linux-kernel@vger.kernel.org,
- Matthias Brugger <matthias.bgg@gmail.com>, Zhang Rui <rui.zhang@intel.com>,
- linux-arm-kernel@lists.infradead.org,
- AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Sender: "Linux-mediatek" <linux-mediatek-bounces@lists.infradead.org>
-
-From: Frank Wunderlich <frank-w@public-files.de>
-
-Reading thermal sensor on mt7986 devices returns invalid temperature:
-
-bpi-r3 ~ # cat /sys/class/thermal/thermal_zone0/temp
- -274000
-
-Fix this by adding missing members in mtk_thermal_data struct which were
-used in mtk_thermal_turn_on_buffer after commit 33140e668b10.
-
-Cc: stable@vger.kernel.org
-Fixes: 33140e668b10 ("thermal/drivers/mediatek: Control buffer enablement tweaks")
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
----
- drivers/thermal/mediatek/auxadc_thermal.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -690,6 +690,9 @@ static const struct mtk_thermal_data mt7
- .adcpnp = mt7986_adcpnp,
- .sensor_mux_values = mt7986_mux_values,
- .version = MTK_THERMAL_V3,
-+ .apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1,
-+ .apmixed_buffer_ctl_mask = GENMASK(31, 6) | BIT(3),
-+ .apmixed_buffer_ctl_set = BIT(0),
- };
-
- static bool mtk_thermal_temp_is_valid(int temp)
--- a/drivers/clk/qcom/gcc-ipq6018.c
+++ b/drivers/clk/qcom/gcc-ipq6018.c
-@@ -2119,6 +2119,26 @@ static struct clk_branch gcc_blsp1_qup5_
+@@ -2121,6 +2121,26 @@ static struct clk_branch gcc_blsp1_qup5_
},
};
static struct clk_branch gcc_blsp1_qup6_spi_apps_clk = {
.halt_reg = 0x0700c,
.clkr = {
-@@ -4275,6 +4295,7 @@ static struct clk_regmap *gcc_ipq6018_cl
+@@ -4277,6 +4297,7 @@ static struct clk_regmap *gcc_ipq6018_cl
[GCC_BLSP1_QUP4_SPI_APPS_CLK] = &gcc_blsp1_qup4_spi_apps_clk.clkr,
[GCC_BLSP1_QUP5_I2C_APPS_CLK] = &gcc_blsp1_qup5_i2c_apps_clk.clkr,
[GCC_BLSP1_QUP5_SPI_APPS_CLK] = &gcc_blsp1_qup5_spi_apps_clk.clkr,
--- a/drivers/clk/qcom/gcc-ipq6018.c
+++ b/drivers/clk/qcom/gcc-ipq6018.c
-@@ -3522,6 +3522,22 @@ static struct clk_branch gcc_prng_ahb_cl
+@@ -3524,6 +3524,22 @@ static struct clk_branch gcc_prng_ahb_cl
},
};
static struct clk_branch gcc_qdss_dap_clk = {
.halt_reg = 0x29084,
.clkr = {
-@@ -4361,6 +4377,7 @@ static struct clk_regmap *gcc_ipq6018_cl
+@@ -4363,6 +4379,7 @@ static struct clk_regmap *gcc_ipq6018_cl
[GCC_SYS_NOC_PCIE0_AXI_CLK] = &gcc_sys_noc_pcie0_axi_clk.clkr,
[GCC_PCIE0_PIPE_CLK] = &gcc_pcie0_pipe_clk.clkr,
[GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr,
--- a/drivers/clk/qcom/gcc-ipq8074.c
+++ b/drivers/clk/qcom/gcc-ipq8074.c
-@@ -1675,13 +1675,21 @@ static struct clk_regmap_div nss_port4_t
+@@ -1677,13 +1677,21 @@ static struct clk_regmap_div nss_port4_t
},
};
F(156250000, P_UNIPHY1_RX, 2, 0, 0),
F(312500000, P_UNIPHY1_RX, 1, 0, 0),
{ }
-@@ -1737,13 +1745,21 @@ static struct clk_regmap_div nss_port5_r
+@@ -1739,13 +1747,21 @@ static struct clk_regmap_div nss_port5_r
},
};
F(156250000, P_UNIPHY1_TX, 2, 0, 0),
F(312500000, P_UNIPHY1_TX, 1, 0, 0),
{ }
-@@ -1799,13 +1815,21 @@ static struct clk_regmap_div nss_port5_t
+@@ -1801,13 +1817,21 @@ static struct clk_regmap_div nss_port5_t
},
};
F(156250000, P_UNIPHY2_RX, 2, 0, 0),
F(312500000, P_UNIPHY2_RX, 1, 0, 0),
{ }
-@@ -1856,13 +1880,21 @@ static struct clk_regmap_div nss_port6_r
+@@ -1858,13 +1882,21 @@ static struct clk_regmap_div nss_port6_r
},
};
--- a/drivers/clk/qcom/gcc-ipq8074.c
+++ b/drivers/clk/qcom/gcc-ipq8074.c
-@@ -4710,6 +4710,7 @@ static const struct qcom_reset_map gcc_i
+@@ -4712,6 +4712,7 @@ static const struct qcom_reset_map gcc_i
[GCC_NSSPORT4_RESET] = { .reg = 0x68014, .bitmask = BIT(27) | GENMASK(9, 8) },
[GCC_NSSPORT5_RESET] = { .reg = 0x68014, .bitmask = BIT(28) | GENMASK(11, 10) },
[GCC_NSSPORT6_RESET] = { .reg = 0x68014, .bitmask = BIT(29) | GENMASK(13, 12) },
};
static const struct parent_map gcc_xo_uniphy0_tx_rx_ubi32_bias_map[] = {
-@@ -1897,12 +1897,11 @@ static const struct freq_tbl ftbl_ubi32_
+@@ -1899,12 +1899,11 @@ static const struct freq_tbl ftbl_ubi32_
{ }
};
projects / openwrt / staging / thess.git / commitdiff