+++ /dev/null
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_AG71XX=y
-CONFIG_AG71XX_AR8216_SUPPORT=y
-# CONFIG_AG71XX_DEBUG is not set
-# CONFIG_AG71XX_DEBUG_FS is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-CONFIG_AR71XX_DEV_AP91_PCI=y
-CONFIG_AR71XX_DEV_AP94_PCI=y
-CONFIG_AR71XX_DEV_AR913X_WMAC=y
-CONFIG_AR71XX_DEV_DSA=y
-CONFIG_AR71XX_DEV_GPIO_BUTTONS=y
-CONFIG_AR71XX_DEV_LEDS_GPIO=y
-CONFIG_AR71XX_DEV_M25P80=y
-CONFIG_AR71XX_DEV_PB42_PCI=y
-CONFIG_AR71XX_DEV_PB9X_PCI=y
-CONFIG_AR71XX_DEV_USB=y
-CONFIG_AR71XX_MACH_AP81=y
-CONFIG_AR71XX_MACH_AP83=y
-CONFIG_AR71XX_MACH_AP96=y
-CONFIG_AR71XX_MACH_AW_NR580=y
-CONFIG_AR71XX_MACH_DIR_600_A1=y
-CONFIG_AR71XX_MACH_DIR_615_C1=y
-CONFIG_AR71XX_MACH_DIR_825_B1=y
-CONFIG_AR71XX_MACH_EAP7660D=y
-CONFIG_AR71XX_MACH_JA76PF=y
-CONFIG_AR71XX_MACH_JWAP003=y
-CONFIG_AR71XX_MACH_MZK_W04NU=y
-CONFIG_AR71XX_MACH_MZK_W300NH=y
-CONFIG_AR71XX_MACH_NBG460N=y
-CONFIG_AR71XX_MACH_PB42=y
-CONFIG_AR71XX_MACH_PB44=y
-CONFIG_AR71XX_MACH_PB92=y
-CONFIG_AR71XX_MACH_RB4XX=y
-CONFIG_AR71XX_MACH_RB750=y
-CONFIG_AR71XX_MACH_TEW_632BRP=y
-CONFIG_AR71XX_MACH_TL_MR3X20=y
-CONFIG_AR71XX_MACH_TL_WA901ND=y
-CONFIG_AR71XX_MACH_TL_WA901ND_V2=y
-CONFIG_AR71XX_MACH_TL_WR1043ND=y
-CONFIG_AR71XX_MACH_TL_WR741ND=y
-CONFIG_AR71XX_MACH_TL_WR841N_V1=y
-CONFIG_AR71XX_MACH_TL_WR941ND=y
-CONFIG_AR71XX_MACH_UBNT=y
-CONFIG_AR71XX_MACH_WNDR3700=y
-CONFIG_AR71XX_MACH_WNR2000=y
-CONFIG_AR71XX_MACH_WP543=y
-CONFIG_AR71XX_MACH_WRT160NL=y
-CONFIG_AR71XX_MACH_WRT400N=y
-CONFIG_AR71XX_MACH_WZR_HP_G300NH=y
-CONFIG_AR71XX_MACH_ZCN_1523H=y
-CONFIG_AR71XX_NVRAM=y
-CONFIG_AR71XX_PCI_ATH9K_FIXUP=y
-CONFIG_AR71XX_WDT=y
-CONFIG_AR8216_PHY=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ATHEROS_AR71XX=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2E is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR2=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_NXP_74HC153=y
-CONFIG_GPIO_PCF857X=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_HAS_PCI=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_GPIO=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-# CONFIG_INITRAMFS_COMPRESSION_LZO is not set
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_SOURCE="../../root"
-CONFIG_IRQ_CPU=y
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_RB750 is not set
-# CONFIG_LEDS_WNDR3700_USB is not set
-# CONFIG_M25PXX_USE_FAST_READ is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_MICREL_PHY=y
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_AR91XX_FLASH=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_WRT160NL_PARTS=y
-CONFIG_MYLOADER=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6060=y
-CONFIG_NET_DSA_MV88E6063=y
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_TAG_DSA is not set
-# CONFIG_NET_DSA_TAG_EDSA is not set
-CONFIG_NET_DSA_TAG_TRAILER=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-CONFIG_MARVELL_PHY=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-CONFIG_RTL8306_PHY=y
-CONFIG_RTL8366RB_PHY=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SPI=y
-CONFIG_SPI_AP83=y
-CONFIG_SPI_AR71XX=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_PB44=y
-# CONFIG_SPI_RB4XX is not set
-# CONFIG_SPI_RB4XX_CPLD is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_VSC7385 is not set
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-CONFIG_TREE_RCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -156,6 +156,13 @@ ifeq (,$(findstring march=octeon, $(cfla
- cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
- endif
-
-+#
-+# Atheros AR71xx
-+#
-+core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/
-+cflags-$(CONFIG_ATHEROS_AR71XX) += -I$(srctree)/arch/mips/include/asm/mach-ar71xx
-+load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000
-+
- cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,)
- cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,)
- cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,)
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -43,6 +43,23 @@ config AR7
- Support for the Texas Instruments AR7 System-on-a-Chip
- family: TNETD7100, 7200 and 7300.
-
-+config ATHEROS_AR71XX
-+ bool "Atheros AR71xx based boards"
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select ARCH_REQUIRE_GPIOLIB
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_HAS_CPU_MIPS32_R2
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_HAS_EARLY_PRINTK
-+ select MIPS_MACHINE
-+ help
-+ Support for Atheros AR71xx based boards.
-+
- config BASLER_EXCITE
- bool "Basler eXcite smart camera"
- select CEVT_R4K
-@@ -674,6 +691,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
- endchoice
-
- source "arch/mips/alchemy/Kconfig"
-+source "arch/mips/ar71xx/Kconfig"
- source "arch/mips/basler/excite/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
+++ /dev/null
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
- obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
- obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
- ops-bcm63xx.o
-+obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o pci-ar724x.o
-
- #
- # These are still pretty much in the old state, watch, go blind.
+++ /dev/null
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -98,6 +98,13 @@ config USB_EHCI_BIG_ENDIAN_DESC
- depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
- default y
-
-+config USB_EHCI_AR71XX
-+ bool "USB EHCI support for AR71xx"
-+ depends on USB_EHCI_HCD && ATHEROS_AR71XX
-+ default y
-+ help
-+ Support for Atheros AR71xx built-in EHCI controller
-+
- config USB_EHCI_FSL
- bool "Support for Freescale on-chip EHCI USB controller"
- depends on USB_EHCI_HCD && FSL_SOC
-@@ -189,6 +196,13 @@ config USB_OHCI_HCD
- To compile this driver as a module, choose M here: the
- module will be called ohci-hcd.
-
-+config USB_OHCI_AR71XX
-+ bool "USB OHCI support for Atheros AR71xx"
-+ depends on USB_OHCI_HCD && ATHEROS_AR71XX
-+ default y
-+ help
-+ Support for Atheros AR71xx built-in OHCI controller
-+
- config USB_OHCI_HCD_PPC_SOC
- bool "OHCI support for on-chip PPC USB controller"
- depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1142,6 +1142,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ehci_atmel_driver
- #endif
-
-+#ifdef CONFIG_USB_EHCI_AR71XX
-+#include "ehci-ar71xx.c"
-+#define PLATFORM_DRIVER ehci_ar71xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
- #error "missing bus glue for ehci-hcd"
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1085,6 +1085,11 @@ MODULE_LICENSE ("GPL");
- #define TMIO_OHCI_DRIVER ohci_hcd_tmio_driver
- #endif
-
-+#ifdef CONFIG_USB_OHCI_AR71XX
-+#include "ohci-ar71xx.c"
-+#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && \
- !defined(PLATFORM_DRIVER) && \
- !defined(OF_PLATFORM_DRIVER) && \
+++ /dev/null
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -53,6 +53,13 @@ if SPI_MASTER
-
- comment "SPI Master Controller Drivers"
-
-+config SPI_AR71XX
-+ tristate "Atheros AR71xx SPI Controller"
-+ depends on SPI_MASTER && ATHEROS_AR71XX
-+ select SPI_BITBANG
-+ help
-+ This is the SPI contoller driver for Atheros AR71xx.
-+
- config SPI_ATMEL
- tristate "Atmel SPI Controller"
- depends on (ARCH_AT91 || AVR32)
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -11,6 +11,7 @@ endif
- obj-$(CONFIG_SPI_MASTER) += spi.o
-
- # SPI master controller drivers (bus)
-+obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o
- obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
- obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
- obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
+++ /dev/null
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -2126,6 +2126,8 @@ config ACENIC_OMIT_TIGON_I
-
- The safe and default value for this is N.
-
-+source drivers/net/ag71xx/Kconfig
-+
- config DL2K
- tristate "DL2000/TC902x-based Gigabit Ethernet support"
- depends on PCI
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -106,6 +106,7 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac/
- # end link order section
- #
-
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_SUNDANCE) += sundance.o
- obj-$(CONFIG_HAMACHI) += hamachi.o
- obj-$(CONFIG_NET) += Space.o loopback.o
+++ /dev/null
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -850,6 +850,13 @@ config TXX9_WDT
- help
- Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
-
-+config AR71XX_WDT
-+ tristate "Atheros AR71xx Watchdog Timer"
-+ depends on ATHEROS_AR71XX
-+ help
-+ Hardware driver for the built-in watchdog timer on the Atheros
-+ AR71xx SoCs.
-+
- # PARISC Architecture
-
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -113,6 +113,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
-
- # PARISC Architecture
-
+++ /dev/null
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -259,6 +259,13 @@ config MTD_ALCHEMY
- help
- Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
-
-+config MTD_AR91XX_FLASH
-+ tristate "Atheros AR91xx parallel flash support"
-+ depends on ATHEROS_AR71XX
-+ select MTD_COMPLEX_MAPPINGS
-+ help
-+ Parallel flash driver for the Atheros AR91xx based boards.
-+
- config MTD_DILNETPC
- tristate "CFI Flash device mapped on DIL/Net PC"
- depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -41,6 +41,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI) += pci.o
- obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
-+obj-$(CONFIG_MTD_AR91XX_FLASH) += ar91xx_flash.o
- obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312) += edb7312.o
- obj-$(CONFIG_MTD_IMPA7) += impa7.o
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -114,6 +114,11 @@ config RTL8306_PHY
- tristate "Driver for Realtek RTL8306S switches"
- select SWCONFIG
-
-+config MICREL_PHY
-+ tristate "Drivers for Micrel/Kendin PHYs"
-+ ---help---
-+ Currently has a driver for the KSZ8041
-+
- config FIXED_PHY
- bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- depends on PHYLIB=y
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi
- obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
- obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
- obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
-+obj-$(CONFIG_MICREL_PHY) += micrel.o
- obj-$(CONFIG_FIXED_PHY) += fixed.o
- obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
- obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
+++ /dev/null
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -873,6 +873,16 @@ static int __devinit m25p_probe(struct s
- part_probes, &parts, 0);
- }
-
-+#ifdef CONFIG_MTD_MYLOADER_PARTS
-+ if (nr_parts <= 0) {
-+ static const char *part_probes[]
-+ = { "MyLoader", NULL, };
-+
-+ nr_parts = parse_mtd_partitions(&flash->mtd,
-+ part_probes, &parts, 0);
-+ }
-+#endif
-+
- if (nr_parts <= 0 && data && data->parts) {
- parts = data->parts;
- nr_parts = data->nr_parts;
+++ /dev/null
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -883,6 +883,15 @@ static int __devinit m25p_probe(struct s
- }
- #endif
-
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+ if (nr_parts <= 0) {
-+ static const char *part_probes[]
-+ = { "RedBoot", NULL, };
-+
-+ nr_parts = parse_mtd_partitions(&flash->mtd,
-+ part_probes, &parts, 0);
-+ }
-+#endif
- if (nr_parts <= 0 && data && data->parts) {
- parts = data->parts;
- nr_parts = data->nr_parts;
+++ /dev/null
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -166,6 +166,7 @@
- #define SST39LF160 0x2782
- #define SST39VF1601 0x234b
- #define SST39VF3201 0x235b
-+#define SST39VF6401B 0x236d
- #define SST39LF512 0x00D4
- #define SST39LF010 0x00D5
- #define SST39LF020 0x00D6
-@@ -1556,6 +1557,18 @@ static const struct amd_flash_info jedec
- ERASEINFO(0x10000,64),
- }
- }, {
-+ .mfr_id = MANUFACTURER_SST,
-+ .dev_id = SST39VF6401B,
-+ .name = "SST 39VF6401B",
-+ .devtypes = CFI_DEVICETYPE_X16,
-+ .uaddr = MTD_UADDR_0xAAAA_0x5555,
-+ .dev_size = SIZE_8MiB,
-+ .cmd_set = P_ID_AMD_STD,
-+ .nr_regions = 1,
-+ .regions = {
-+ ERASEINFO(0x10000,128)
-+ }
-+ }, {
- .mfr_id = MANUFACTURER_ST,
- .dev_id = M29F800AB,
- .name = "ST M29F800AB",
+++ /dev/null
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1169,8 +1169,8 @@ static int __xipram do_write_oneword(str
- break;
- }
-
-- if (chip_ready(map, adr))
-- break;
-+ if (chip_good(map, adr, datum))
-+ goto enable_xip;
-
- /* Latency issues. Drop the lock, wait a while and retry */
- UDELAY(map, chip, adr, 1);
-@@ -1186,6 +1186,8 @@ static int __xipram do_write_oneword(str
-
- ret = -EIO;
- }
-+
-+ enable_xip:
- xip_enable(map, chip, adr);
- op_done:
- chip->state = FL_READY;
-@@ -1532,7 +1534,6 @@ static int cfi_amdstd_write_buffers(stru
- return 0;
- }
-
--
- /*
- * Handle devices with one erase region, that only implement
- * the chip erase command.
-@@ -1596,8 +1597,8 @@ static int __xipram do_erase_chip(struct
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr))
-- break;
-+ if (chip_good(map, adr, map_word_ff(map)))
-+ goto op_done;
-
- if (time_after(jiffies, timeo)) {
- printk(KERN_WARNING "MTD %s(): software timeout\n",
-@@ -1617,6 +1618,7 @@ static int __xipram do_erase_chip(struct
- ret = -EIO;
- }
-
-+ op_done:
- chip->state = FL_READY;
- xip_enable(map, chip, adr);
- put_chip(map, chip, adr);
-@@ -1684,9 +1686,9 @@ static int __xipram do_erase_oneblock(st
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr)) {
-+ if (chip_good(map, adr, map_word_ff(map))) {
- xip_enable(map, chip, adr);
-- break;
-+ goto op_done;
- }
-
- if (time_after(jiffies, timeo)) {
-@@ -1708,6 +1710,7 @@ static int __xipram do_erase_oneblock(st
- ret = -EIO;
- }
-
-+ op_done:
- chip->state = FL_READY;
- put_chip(map, chip, adr);
- spin_unlock(chip->mutex);
+++ /dev/null
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -892,6 +892,16 @@ static int __devinit m25p_probe(struct s
- part_probes, &parts, 0);
- }
- #endif
-+
-+#ifdef CONFIG_MTD_WRT160NL_PARTS
-+ if (nr_parts <= 0) {
-+ static const char *part_probes[]
-+ = { "wrt160nl", NULL, };
-+
-+ nr_parts = parse_mtd_partitions(&flash->mtd,
-+ part_probes, &parts, 0);
-+ }
-+#endif
- if (nr_parts <= 0 && data && data->parts) {
- parts = data->parts;
- nr_parts = data->nr_parts;
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -181,6 +181,12 @@ config MTD_AR7_PARTS
- ---help---
- TI AR7 partitioning support
-
-+config MTD_WRT160NL_PARTS
-+ tristate "Linksys WRT160NL partitioning support"
-+ depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL
-+ ---help---
-+ Linksys WRT160NL partitioning support
-+
- config MTD_MYLOADER_PARTS
- tristate "MyLoader partition parsing"
- depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX)
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
- obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
-+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
- obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-
+++ /dev/null
---- a/drivers/usb/host/ehci-q.c
-+++ b/drivers/usb/host/ehci-q.c
-@@ -1172,6 +1172,9 @@ static void end_unlink_async (struct ehc
- ehci->reclaim = NULL;
- start_unlink_async (ehci, next);
- }
-+
-+ if (ehci->has_synopsys_hc_bug)
-+ writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
- }
-
- /* makes sure the async qh will become idle */
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -131,6 +131,7 @@ struct ehci_hcd { /* one per controlle
- unsigned need_io_watchdog:1;
- unsigned broken_periodic:1;
- unsigned amd_l1_fix:1;
-+ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */
-
- /* required for usb32 quirk */
- #define OHCI_CTRL_HCFS (3 << 6)
+++ /dev/null
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -39,7 +39,7 @@
- #include <linux/mtd/xip.h>
-
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
-
- #define MAX_WORD_RETRIES 3
-
-@@ -54,7 +54,9 @@
-
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#if !FORCE_WORD_WRITE
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#endif
- static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
- static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
- static void cfi_amdstd_sync (struct mtd_info *);
-@@ -189,6 +191,7 @@ static void fixup_amd_bootblock(struct m
- }
- #endif
-
-+#if !FORCE_WORD_WRITE
- static void fixup_use_write_buffers(struct mtd_info *mtd, void *param)
- {
- struct map_info *map = mtd->priv;
-@@ -198,6 +201,7 @@ static void fixup_use_write_buffers(stru
- mtd->write = cfi_amdstd_write_buffers;
- }
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /* Atmel chips don't use the same PRI format as AMD chips */
- static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
-@@ -1343,6 +1347,7 @@ static int cfi_amdstd_write_words(struct
- /*
- * FIXME: interleaved mode not tested, and probably not supported!
- */
-+#if !FORCE_WORD_WRITE
- static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
- unsigned long adr, const u_char *buf,
- int len)
-@@ -1454,7 +1459,6 @@ static int __xipram do_write_buffer(stru
- return ret;
- }
-
--
- static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
- {
-@@ -1533,6 +1537,7 @@ static int cfi_amdstd_write_buffers(stru
-
- return 0;
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /*
- * Handle devices with one erase region, that only implement
+++ /dev/null
---- a/net/dsa/tag_trailer.c
-+++ b/net/dsa/tag_trailer.c
-@@ -86,7 +86,7 @@ static int trailer_rcv(struct sk_buff *s
-
- trailer = skb_tail_pointer(skb) - 4;
- if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
-- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
-+ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
- goto out_drop;
-
- source_port = trailer[1] & 7;
+++ /dev/null
---- a/net/dsa/Kconfig
-+++ b/net/dsa/Kconfig
-@@ -36,6 +36,13 @@ config NET_DSA_MV88E6060
- This enables support for the Marvell 88E6060 ethernet switch
- chip.
-
-+config NET_DSA_MV88E6063
-+ bool "Marvell 88E6063 ethernet switch chip support"
-+ select NET_DSA_TAG_TRAILER
-+ ---help---
-+ This enables support for the Marvell 88E6063 ethernet switch
-+ chip
-+
- config NET_DSA_MV88E6XXX_NEED_PPU
- bool
- default n
---- a/net/dsa/Makefile
-+++ b/net/dsa/Makefile
-@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag
- # switch drivers
- obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
- obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
-+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
- obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o
- obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o
-
+++ /dev/null
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
- static char nullstring[] = "unallocated";
- #endif
-
-+ buf = vmalloc(master->erasesize);
-+ if (!buf)
-+ return -ENOMEM;
-+
-+ restart:
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
-- while (master->block_isbad &&
-+ while (master->block_isbad &&
- master->block_isbad(master, offset)) {
- if (!offset) {
- nogood:
- printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+ vfree(buf);
- return -EIO;
- }
- offset -= master->erasesize;
- }
- } else {
- offset = directory * master->erasesize;
-- while (master->block_isbad &&
-+ while (master->block_isbad &&
- master->block_isbad(master, offset)) {
- offset += master->erasesize;
- if (offset == master->size)
- goto nogood;
- }
- }
-- buf = vmalloc(master->erasesize);
--
-- if (!buf)
-- return -ENOMEM;
--
- printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- master->name, offset);
-
-@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
- }
- if (i == numslots) {
- /* Didn't find it */
-+ if (offset + master->erasesize < master->size) {
-+ /* not at the end of the flash yet, maybe next block :) */
-+ directory++;
-+ goto restart;
-+ }
- printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- master->name);
- ret = 0;
+++ /dev/null
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -44,8 +44,8 @@ obj-y += macintosh/
- obj-$(CONFIG_IDE) += ide/
- obj-$(CONFIG_SCSI) += scsi/
- obj-$(CONFIG_ATA) += ata/
--obj-$(CONFIG_MTD) += mtd/
- obj-$(CONFIG_SPI) += spi/
-+obj-$(CONFIG_MTD) += mtd/
- obj-y += net/
- obj-$(CONFIG_ATM) += atm/
- obj-$(CONFIG_FUSION) += message/
+++ /dev/null
---- a/include/linux/spi/spi.h
-+++ b/include/linux/spi/spi.h
-@@ -434,6 +434,8 @@ struct spi_transfer {
- dma_addr_t rx_dma;
-
- unsigned cs_change:1;
-+ unsigned verify:1;
-+ unsigned fast_write:1;
- u8 bits_per_word;
- u16 delay_usecs;
- u32 speed_hz;
-@@ -475,6 +477,7 @@ struct spi_message {
- struct spi_device *spi;
-
- unsigned is_dma_mapped:1;
-+ unsigned fast_read:1;
-
- /* REVISIT: we might want a flag affecting the behavior of the
- * last transfer ... allowing things like "read 16 bit length L"
+++ /dev/null
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -214,6 +214,12 @@ config SPI_PXA2XX
- The driver can be configured to use any SSP port and additional
- documentation can be found a Documentation/spi/pxa2xx.
-
-+config SPI_RB4XX
-+ tristate "Mikrotik RB4XX SPI master"
-+ depends on SPI_MASTER && AR71XX_MACH_RB4XX
-+ help
-+ SPI controller driver for the Mikrotik RB4xx series boards.
-+
- config SPI_S3C24XX
- tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C2410 && EXPERIMENTAL
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -33,6 +33,7 @@ obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s
- obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
- obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
- obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
-+obj-$(CONFIG_SPI_RB4XX) += rb4xx_spi.o
- obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
- obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o
- # ... add above this line ...
+++ /dev/null
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -294,6 +294,13 @@ config SPI_TLE62X0
- sysfs interface, with each line presented as a kind of GPIO
- exposing both switch control and diagnostic feedback.
-
-+config SPI_RB4XX_CPLD
-+ tristate "MikroTik RB4XX CPLD driver"
-+ depends on AR71XX_MACH_RB4XX
-+ help
-+ SPI driver for the Xilinx CPLD chip present on the
-+ MikroTik RB4xx boards.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -39,6 +39,7 @@ obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.
- # ... add above this line ...
-
- # SPI protocol drivers (device/link on bus)
-+obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o
- obj-$(CONFIG_SPI_SPIDEV) += spidev.o
- obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o
- # ... add above this line ...
+++ /dev/null
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -482,4 +482,8 @@ config MTD_NAND_W90P910
- This enables the driver for the NAND Flash on evaluation board based
- on w90p910.
-
-+config MTD_NAND_RB4XX
-+ tristate "NAND flash driver for RouterBoard 4xx series"
-+ depends on MTD_NAND && AR71XX_MACH_RB4XX
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) +=
- obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
- obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
- obj-$(CONFIG_MTD_ALAUDA) += alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
+++ /dev/null
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -11,6 +11,7 @@ endif
- obj-$(CONFIG_SPI_MASTER) += spi.o
-
- # SPI master controller drivers (bus)
-+obj-$(CONFIG_SPI_AP83) += ap83_spi.o
- obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o
- obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
- obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -53,6 +53,14 @@ if SPI_MASTER
-
- comment "SPI Master Controller Drivers"
-
-+config SPI_AP83
-+ tristate "Atheros AP83 specific SPI Controller"
-+ depends on SPI_MASTER && AR71XX_MACH_AP83
-+ select SPI_BITBANG
-+ help
-+ This is a specific SPI controller driver for the Atheros AP83
-+ reference board.
-+
- config SPI_AR71XX
- tristate "Atheros AR71xx SPI Controller"
- depends on SPI_MASTER && ATHEROS_AR71XX
+++ /dev/null
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -309,6 +309,11 @@ config SPI_RB4XX_CPLD
- SPI driver for the Xilinx CPLD chip present on the
- MikroTik RB4xx boards.
-
-+config SPI_VSC7385
-+ tristate "Vitesse VSC7385 ethernet switch driver"
-+ help
-+ SPI driver for the Vitesse VSC7385 ethernet switch.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.
- # SPI protocol drivers (device/link on bus)
- obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o
- obj-$(CONFIG_SPI_SPIDEV) += spidev.o
-+obj-$(CONFIG_SPI_VSC7385) += spi_vsc7385.o
- obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o
- # ... add above this line ...
-
+++ /dev/null
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -68,6 +68,14 @@ config SPI_AR71XX
- help
- This is the SPI contoller driver for Atheros AR71xx.
-
-+config SPI_PB44
-+ tristate "Atheros PB44 board specific SPI controller"
-+ depends on SPI_MASTER && AR71XX_MACH_PB44
-+ select SPI_BITBANG
-+ help
-+ This is a specific SPI controller driver for the Atheros PB44
-+ reference board.
-+
- config SPI_ATMEL
- tristate "Atmel SPI Controller"
- depends on (ARCH_AT91 || AVR32)
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
- obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o
- obj-$(CONFIG_SPI_IMX) += spi_imx.o
- obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
-+obj-$(CONFIG_SPI_PB44) += pb44_spi.o
- obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
- obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
- obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o
+++ /dev/null
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -236,6 +236,13 @@ config LEDS_BD2802
- This option enables support for BD2802GU RGB LED driver chips
- accessed via the I2C bus.
-
-+config LEDS_WNDR3700_USB
-+ tristate "NETGEAR WNDR3700 USB LED driver"
-+ depends on LEDS_CLASS && AR71XX_MACH_WNDR3700
-+ help
-+ This option enables support for the USB LED found on the
-+ NETGEAR WNDR3700 board.
-+
- comment "LED Triggers"
-
- config LEDS_TRIGGERS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903
- obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
- obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
- obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
-+obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o
-
- # LED SPI Drivers
- obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
+++ /dev/null
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -230,4 +230,12 @@ config GPIO_UCB1400
- To compile this driver as a module, choose M here: the
- module will be called ucb1400_gpio.
-
-+comment "Other GPIO expanders"
-+
-+config GPIO_NXP_74HC153
-+ tristate "NXP 74HC153 Dual 4-input multiplexer"
-+ help
-+ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
-+ provides a GPIO interface supporting inputs.
-+
- endif
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_GPIO_MAX7301) += max7301.o
- obj-$(CONFIG_GPIO_MAX732X) += max732x.o
- obj-$(CONFIG_GPIO_MC33880) += mc33880.o
- obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o
-+obj-$(CONFIG_GPIO_NXP_74HC153) += nxp_74hc153.o
- obj-$(CONFIG_GPIO_PCA953X) += pca953x.o
- obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o
- obj-$(CONFIG_GPIO_PL061) += pl061.o
+++ /dev/null
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -243,6 +243,10 @@ config LEDS_WNDR3700_USB
- This option enables support for the USB LED found on the
- NETGEAR WNDR3700 board.
-
-+config LEDS_RB750
-+ tristate "LED driver for the Mikrotik RouterBOARD 750"
-+ depends on LEDS_CLASS && AR71XX_MACH_RB750
-+
- comment "LED Triggers"
-
- config LEDS_TRIGGERS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -30,6 +30,7 @@ obj-$(CONFIG_LEDS_WM831X_STATUS) += leds
- obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
- obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
- obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o
-+obj-${CONFIG_LEDS_RB750} += leds-rb750.o
-
- # LED SPI Drivers
- obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
+++ /dev/null
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -486,4 +486,8 @@ config MTD_NAND_RB4XX
- tristate "NAND flash driver for RouterBoard 4xx series"
- depends on MTD_NAND && AR71XX_MACH_RB4XX
-
-+config MTD_NAND_RB750
-+ tristate "NAND flash driver for the RouterBoard 750"
-+ depends on MTD_NAND && AR71XX_MACH_RB750
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx
- obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
- obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
-+obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o
- obj-$(CONFIG_MTD_ALAUDA) += alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
+++ /dev/null
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -178,6 +178,7 @@ endif
- #
- libs-$(CONFIG_ARC) += arch/mips/fw/arc/
- libs-$(CONFIG_CFE) += arch/mips/fw/cfe/
-+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/
- libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/
- libs-y += arch/mips/fw/lib/
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -880,6 +880,9 @@ config MIPS_NILE4
- config MIPS_DISABLE_OBSOLETE_IDE
- bool
-
-+config MYLOADER
-+ bool
-+
- config SYNC_R4K
- bool
-
+++ /dev/null
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -48,6 +48,7 @@
- #include <asm/types.h>
- #include <asm/stacktrace.h>
- #include <asm/irq.h>
-+#include <asm/time.h>
-
- extern void check_wait(void);
- extern asmlinkage void r4k_wait(void);
-@@ -1537,6 +1538,8 @@ void __cpuinit per_cpu_trap_init(void)
- */
- if (cpu_has_mips_r2) {
- cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
-+ if (get_c0_compare_irq)
-+ cp0_compare_irq = get_c0_compare_irq();
- cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
- if (cp0_perfcount_irq == cp0_compare_irq)
- cp0_perfcount_irq = -1;
---- a/arch/mips/include/asm/time.h
-+++ b/arch/mips/include/asm/time.h
-@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
- */
- #ifdef CONFIG_CEVT_R4K_LIB
- extern unsigned int __weak get_c0_compare_int(void);
-+extern unsigned int __weak get_c0_compare_irq(void);
- extern int r4k_clockevent_init(void);
- #endif
-
+++ /dev/null
---- a/drivers/net/ag71xx/ag71xx_main.c
-+++ b/drivers/net/ag71xx/ag71xx_main.c
-@@ -686,6 +686,7 @@ err_drop:
-
- static int ag71xx_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
- {
-+ struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
- struct ag71xx *ag = netdev_priv(dev);
- int ret;
-
-@@ -717,7 +718,7 @@ static int ag71xx_do_ioctl(struct net_de
- if (ag->phy_dev == NULL)
- break;
-
-- return phy_mii_ioctl(ag->phy_dev, ifr, cmd);
-+ return phy_mii_ioctl(ag->phy_dev, data, cmd);
-
- default:
- break;
---- a/drivers/spi/ap83_spi.c
-+++ b/drivers/spi/ap83_spi.c
-@@ -127,34 +127,33 @@ static void ap83_spi_chipselect(struct s
-
- #define EXPAND_BITBANG_TXRX
- #include <linux/spi/spi_bitbang.h>
--#include "spi_bitbang_txrx.h"
-
- static u32 ap83_spi_txrx_mode0(struct spi_device *spi,
- unsigned nsecs, u32 word, u8 bits)
- {
- dev_dbg(&spi->dev, "TXRX0 word=%08x, bits=%u\n", word, bits);
-- return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
-+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
- }
-
- static u32 ap83_spi_txrx_mode1(struct spi_device *spi,
- unsigned nsecs, u32 word, u8 bits)
- {
- dev_dbg(&spi->dev, "TXRX1 word=%08x, bits=%u\n", word, bits);
-- return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
-+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
- }
-
- static u32 ap83_spi_txrx_mode2(struct spi_device *spi,
- unsigned nsecs, u32 word, u8 bits)
- {
- dev_dbg(&spi->dev, "TXRX2 word=%08x, bits=%u\n", word, bits);
-- return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
-+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
- }
-
- static u32 ap83_spi_txrx_mode3(struct spi_device *spi,
- unsigned nsecs, u32 word, u8 bits)
- {
- dev_dbg(&spi->dev, "TXRX3 word=%08x, bits=%u\n", word, bits);
-- return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
-+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
- }
-
- static int ap83_spi_probe(struct platform_device *pdev)
---- a/drivers/watchdog/ar71xx_wdt.c
-+++ b/drivers/watchdog/ar71xx_wdt.c
-@@ -146,7 +146,7 @@ static struct watchdog_info ar71xx_wdt_i
- .identity = "AR71XX watchdog",
- };
-
--static long ar71xx_wdt_ioctl(struct file *file,
-+static int ar71xx_wdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
- {
- int t;
-@@ -197,7 +197,7 @@ static long ar71xx_wdt_ioctl(struct file
- static const struct file_operations ar71xx_wdt_fops = {
- .owner = THIS_MODULE,
- .write = ar71xx_wdt_write,
-- .unlocked_ioctl = ar71xx_wdt_ioctl,
-+ .ioctl = ar71xx_wdt_ioctl,
- .open = ar71xx_wdt_open,
- .release = ar71xx_wdt_release,
- };
projects / openwrt / staging / xback.git / commitdiff