--- /dev/null
+/*
+ * TP-LINK TL-WDR3500 board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 Gui Iribarren <gui@altermundi.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define WDR3500_GPIO_LED_USB1 11
+#define WDR3500_GPIO_LED_WLAN2G 13
+#define WDR3500_GPIO_LED_SYSTEM 14
+#define WDR3500_GPIO_LED_QSS 15
+
+#define WDR3500_GPIO_BTN_WPS 16
+#define WDR3500_GPIO_BTN_RFKILL 17
+
+#define WDR3500_GPIO_USB1_POWER 22
+
+#define WDR3500_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WDR3500_KEYS_DEBOUNCE_INTERVAL (3 * WDR3500_KEYS_POLL_INTERVAL)
+
+#define WDR3500_MAC0_OFFSET 0
+#define WDR3500_MAC1_OFFSET 6
+#define WDR3500_WMAC_CALDATA_OFFSET 0x1000
+#define WDR3500_PCIE_CALDATA_OFFSET 0x5000
+
+static const char *wdr3500_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data wdr3500_flash_data = {
+ .part_probes = wdr3500_part_probes,
+};
+
+static struct gpio_led wdr3500_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:qss",
+ .gpio = WDR3500_GPIO_LED_QSS,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:system",
+ .gpio = WDR3500_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:usb1",
+ .gpio = WDR3500_GPIO_LED_USB1,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:wlan2g",
+ .gpio = WDR3500_GPIO_LED_WLAN2G,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button wdr3500_gpio_keys[] __initdata = {
+ {
+ .desc = "QSS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WDR3500_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WDR3500_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+ {
+ .desc = "RFKILL switch",
+ .type = EV_SW,
+ .code = KEY_RFKILL,
+ .debounce_interval = WDR3500_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WDR3500_GPIO_BTN_RFKILL,
+ },
+};
+
+
+static void __init wdr3500_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 tmpmac[ETH_ALEN];
+
+ ath79_register_m25p80(&wdr3500_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr3500_leds_gpio),
+ wdr3500_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, WDR3500_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wdr3500_gpio_keys),
+ wdr3500_gpio_keys);
+
+ ath79_init_mac(tmpmac, mac, 0);
+ ath79_register_wmac(art + WDR3500_WMAC_CALDATA_OFFSET, tmpmac);
+
+ ath79_init_mac(tmpmac, mac, 1);
+ ap9x_pci_setup_wmac_led_pin(0, 0);
+ ap91_pci_init(art + WDR3500_PCIE_CALDATA_OFFSET, tmpmac);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(1, 0x0);
+
+ /* LAN */
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ /* GMAC1 is connected to the internal switch */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+
+ ath79_register_eth(1);
+
+ /* WAN */
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 2);
+
+ /* GMAC0 is connected to the PHY4 of the internal switch */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(4);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+
+ ath79_register_eth(0);
+
+ gpio_request_one(WDR3500_GPIO_USB1_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB1 power");
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WDR3500, "TL-WDR3500",
+ "TP-LINK TL-WDR3500",
+ wdr3500_setup);
--- /dev/null
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -84,6 +84,7 @@ enum ath79_mach_type {
+ ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/
+ ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
+ ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
++ ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */
+ ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */
+ ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
+ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -514,6 +514,17 @@ config ATH79_MACH_TL_WA901ND_V2
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_TL_WDR3500
++ bool "TP-LINK TL-WDR3500 board support"
++ select SOC_AR934X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_TL_WDR4300
+ bool "TP-LINK TL-WDR3600/4300/4310 board support"
+ select SOC_AR934X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -81,6 +81,7 @@ obj-$(CONFIG_ATH79_MACH_TL_MR3020) += ma
+ obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o
+ obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o
+ obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o
+ obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o
+ obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o
+ obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o
projects / openwrt / staging / neocturne.git / commitdiff