treewide: move calibration data extraction function to library

This moves the almost identical calibration data extraction
functions present multiple times in several targets to a single
library file /lib/functions/caldata.sh.

Functions are renamed with more generic names to merge different
variants that only differ in their names.

Most of the targets used find_mtd_chardev, while some used
find_mtd_part inside the extraction code. To merge them, the more
abundant version with find_mtd_chardev is used in the common code.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[rebase on latest master; add mpc85xx]
Signed-off-by: David Bauer <mail@david-bauer.net>

diff --git a/package/base-files/files/lib/functions/caldata.sh b/package/base-files/files/lib/functions/caldata.sh
new file mode 100644 (file)
index 0000000..f2a3066
--- /dev/null
+++ b/package/base-files/files/lib/functions/caldata.sh
@@ -0,0 +1,75 @@
+# Copyright (C) 2019 OpenWrt.org
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+caldata_die() {
+       echo "caldata: " "$*"
+       exit 1
+}
+
+caldata_extract() {
+       local part=$1
+       local offset=$(($2))
+       local count=$(($3))
+       local mtd
+
+       mtd=$(find_mtd_chardev $part)
+       [ -n "$mtd" ] || caldata_die "no mtd device found for partition $part"
+
+       dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
+               caldata_die "failed to extract calibration data from $mtd"
+}
+
+caldata_extract_ubi() {
+       local part=$1
+       local offset=$(($2))
+       local count=$(($3))
+       local ubidev
+       local ubi
+
+       . /lib/upgrade/nand.sh
+
+       ubidev=$(nand_find_ubi $CI_UBIPART)
+       ubi=$(nand_find_volume $ubidev $part)
+       [ -n "$ubi" ] || caldata_die "no UBI volume found for $part"
+
+       dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
+               caldata_die "failed to extract calibration data from $ubi"
+}
+
+caldata_extract_reverse() {
+       local part=$1
+       local offset=$2
+       local count=$(($3))
+       local mtd
+       local reversed
+       local caldata
+
+       mtd=$(find_mtd_chardev "$part")
+       reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
+
+       for byte in $reversed; do
+               caldata="\x${byte}${caldata}"
+       done
+
+       printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
+}
+
+caldata_from_file() {
+       local source=$1
+       local offset=$(($2))
+       local count=$(($3))
+
+       dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
+               caldata_die "failed to extract calibration data from $source"
+}
+
+caldata_valid() {
+       local expected="$1"
+
+       magic=$(hexdump -v -n 2 -e '1/1 "%02x"' /lib/firmware/$FIRMWARE)
+       [[ "$magic" == "$expected" ]]
+       return $?
+}
+

diff --git a/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 272c084c997e4b7750e8cb4611a21ca8c86ba670..07100b1856c042317c990eb1718d1dc93c56fcb5 100644 (file)
--- a/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -2,42 +2,7 @@
 
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-ath9k_eeprom_die() {
-       echo "ath9k eeprom: " "$*"
-       exit 1
-}
-
-ath9k_eeprom_extract() {
-       local part=$1
-       local offset=$(($2))
-       local count=$(($3))
-       local mtd
-
-       mtd=$(find_mtd_chardev $part)
-       [ -n "$mtd" ] || \
-               ath9k_eeprom_die "no mtd device found for partition $part"
-
-       dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
-               ath9k_eeprom_die "failed to extract from $mtd"
-}
-
-ath9k_ubi_eeprom_extract() {
-       local part=$1
-       local offset=$(($2))
-       local count=$(($3))
-       local ubidev=$(nand_find_ubi $CI_UBIPART)
-       local ubi
-
-       ubi=$(nand_find_volume $ubidev $part)
-       [ -n "$ubi" ] || \
-               ath9k_eeprom_die "no UBI volume found for $part"
-
-       dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
-               ath9k_eeprom_die "failed to extract from $ubi"
-}
+. /lib/functions/caldata.sh
 
 ath9k_patch_firmware_mac() {
        local mac=$1
@@ -56,14 +21,14 @@ case "$FIRMWARE" in
                . /lib/upgrade/nand.sh
 
                if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
-                       ath9k_ubi_eeprom_extract "caldata" 0x5000 0x1000
+                       caldata_extract_ubi "caldata" 0x5000 0x1000
                else
-                       ath9k_eeprom_extract "wifi_data" 0x5000 0x1000
+                       caldata_extract "wifi_data" 0x5000 0x1000
                        ath9k_patch_firmware_mac $(mtd_get_mac_binary wifi_data 0xc)
                fi
                ;;
        *)
-               ath9k_eeprom_die "board $board is not supported yet"
+               caldata_die "board $board is not supported yet"
                ;;
        esac
        ;;
@@ -74,14 +39,14 @@ case "$FIRMWARE" in
                . /lib/upgrade/nand.sh
 
                if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
-                       ath9k_ubi_eeprom_extract "caldata" 0x1000 0x1000
+                       caldata_extract_ubi "caldata" 0x1000 0x1000
                else
-                       ath9k_eeprom_extract "wifi_data" 0x1000 0x1000
+                       caldata_extract "wifi_data" 0x1000 0x1000
                        ath9k_patch_firmware_mac $(mtd_get_mac_binary wifi_data 0x0)
                fi
                ;;
        *)
-               ath9k_eeprom_die "board $board is not supported yet"
+               caldata_die "board $board is not supported yet"
                ;;
        esac
        ;;

diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 0cdd78331551826871b6f6e365f033c127fa7eb4..5ec13efd3fcd7badf0586c4313cfa7b909e93b6d 100644 (file)
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -2,45 +2,7 @@
 
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-ath9k_eeprom_die() {
-       echo "ath9k eeprom: " "$*"
-       exit 1
-}
-
-ath9k_eeprom_extract() {
-       local part=$1
-       local offset=$(($2))
-       local count=$(($3))
-       local mtd
-
-       mtd=$(find_mtd_chardev $part)
-       [ -n "$mtd" ] || \
-               ath9k_eeprom_die "no mtd device found for partition $part"
-
-       dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
-               ath9k_eeprom_die "failed to extract from $mtd"
-}
-
-ath9k_eeprom_extract_reverse() {
-       local part=$1
-       local offset=$2
-       local count=$(($3))
-       local mtd
-       local reversed
-       local caldata
-
-       mtd=$(find_mtd_chardev "$part")
-       reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
-
-       for byte in $reversed; do
-               caldata="\x${byte}${caldata}"
-       done
-
-       printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
-}
+. /lib/functions/caldata.sh
 
 ath9k_patch_fw_mac() {
        local mac=$1
@@ -83,11 +45,11 @@ case "$FIRMWARE" in
 "ath9k-eeprom-ahb-18100000.wmac.bin")
        case $board in
        avm,fritz4020)
-               ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440
+               caldata_extract_reverse "urlader" 0x1541 0x440
                ;;
        dlink,dir-825-c1|\
        dlink,dir-835-a1)
-               ath9k_eeprom_extract "art" 0x1000 0x440
+               caldata_extract "art" 0x1000 0x440
                ath9k_patch_fw_mac $(mtd_get_mac_text "mac" 0x4) 0x2
                ;;
        dlink,dir-842-c1|\
@@ -96,11 +58,11 @@ case "$FIRMWARE" in
        dlink,dir-859-a1|\
        nec,wg1200cr|\
        wd,mynet-n750)
-               ath9k_eeprom_extract "art" 0x1000 0x440
+               caldata_extract "art" 0x1000 0x440
                ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2
                ;;
        engenius,ecb1750)
-               ath9k_eeprom_extract "art" 0x1000 0x440
+               caldata_extract "art" 0x1000 0x440
                ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) 0x2
                ;;
        engenius,epg5000|\
@@ -108,39 +70,39 @@ case "$FIRMWARE" in
        iodata,wn-ac1600dgr|\
        iodata,wn-ac1600dgr2|\
        iodata,wn-ag300dgr)
-               ath9k_eeprom_extract "art" 0x1000 0x440
+               caldata_extract "art" 0x1000 0x440
                ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 0x2
                ;;
        nec,wg800hp)
-               ath9k_eeprom_extract "art" 0x1000 0x440
+               caldata_extract "art" 0x1000 0x440
                ath9k_patch_fw_mac $(mtd_get_mac_text board_data 0x680) 0x2
                ;;
        qihoo,c301)
-               ath9k_eeprom_extract "radiocfg" 0x1000 0x440
+               caldata_extract "radiocfg" 0x1000 0x440
                ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2
                ;;
        *)
-               ath9k_eeprom_die "board $board is not supported yet"
+               caldata_die "board $board is not supported yet"
                ;;
        esac
        ;;
 "ath9k-eeprom-pci-0000:00:00.0.bin")
        case $board in
        avm,fritz300e)
-               ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440
+               caldata_extract_reverse "urloader" 0x1541 0x440
                ;;
        buffalo,whr-g301n|\
        buffalo,wzr-hp-g302h-a1a0|\
        tplink,tl-wr841-v5|\
        tplink,tl-wr941-v4)
-               ath9k_eeprom_extract "art" 0x1000 0xeb8
+               caldata_extract "art" 0x1000 0xeb8
                ;;
        buffalo,wzr-hp-g450h)
-               ath9k_eeprom_extract "art" 0x1000 0x440
+               caldata_extract "art" 0x1000 0x440
                ;;
        dlink,dir-825-c1|\
        dlink,dir-835-a1)
-               ath9k_eeprom_extract "art" 0x5000 0x440
+               caldata_extract "art" 0x5000 0x440
                ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) 0x2
                ;;
        ocedo,raccoon|\
@@ -149,7 +111,7 @@ case "$FIRMWARE" in
        tplink,tl-wdr4300-v1|\
        tplink,tl-wdr4900-v2|\
        winchannel,wb2000)
-               ath9k_eeprom_extract "art" 0x5000 0x440
+               caldata_extract "art" 0x5000 0x440
                ;;
        netgear,wnr612-v2|\
        on,n150r|\
@@ -167,24 +129,24 @@ case "$FIRMWARE" in
        ubnt,bullet-m|\
        ubnt,nano-m|\
        ubnt,rocket-m)
-               ath9k_eeprom_extract "art" 0x1000 0x1000
+               caldata_extract "art" 0x1000 0x1000
                ;;
        pqi,air-pen)
-               ath9k_eeprom_extract "art" 0x1000 0x7d2
+               caldata_extract "art" 0x1000 0x7d2
                ;;
        ubnt,unifi)
-               ath9k_eeprom_extract "art" 0x1000 0x800
+               caldata_extract "art" 0x1000 0x800
                ;;
        wd,mynet-n750)
-               ath9k_eeprom_extract "art" 0x5000 0x440
+               caldata_extract "art" 0x5000 0x440
                ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan5mac") 0x2
                ;;
        wd,mynet-wifi-rangeextender)
-               ath9k_eeprom_extract "art" 0x1000 0x1000
+               caldata_extract "art" 0x1000 0x1000
                ath9k_patch_fw_mac $(nvram get wl0_hwaddr) "$mac" 0x2
                ;;
        *)
-               ath9k_eeprom_die "board $board is not supported yet"
+               caldata_die "board $board is not supported yet"
                ;;
        esac
        ;;
@@ -195,14 +157,14 @@ case "$FIRMWARE" in
        netgear,wndr3700v2|\
        netgear,wndr3800|\
        netgear,wndr3800ch)
-               ath9k_eeprom_extract "art" 0x1000 0xeb8
+               caldata_extract "art" 0x1000 0xeb8
                ;;
        dlink,dir-825-b1)
-               ath9k_eeprom_extract "caldata" 0x1000 0xeb8
+               caldata_extract "caldata" 0x1000 0xeb8
                ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c
                ;;
        *)
-               ath9k_eeprom_die "board $board is not supported yet"
+               caldata_die "board $board is not supported yet"
                ;;
        esac
        ;;
@@ -213,14 +175,14 @@ case "$FIRMWARE" in
        netgear,wndr3700v2|\
        netgear,wndr3800|\
        netgear,wndr3800ch)
-               ath9k_eeprom_extract "art" 0x5000 0xeb8
+               caldata_extract "art" 0x5000 0xeb8
                ;;
        dlink,dir-825-b1)
-               ath9k_eeprom_extract "caldata" 0x5000 0xeb8
+               caldata_extract "caldata" 0x5000 0xeb8
                ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c
                ;;
        *)
-               ath9k_eeprom_die "board $board is not supported yet"
+               caldata_die "board $board is not supported yet"
                ;;
        esac
        ;;

diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 3844481f5aaa990f4bbb9ddf753a6d5cb6192db1..878f6443abd7f7954df61e54f016f02cdf7461fc 100644 (file)
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -1,35 +1,9 @@
 #!/bin/sh
 
-. /lib/functions.sh
-. /lib/functions/k2t.sh
-
-ath10kcal_die() {
-       echo "ath10cal: " "$*"
-       exit 1
-}
-
-ath10kcal_from_file() {
-       local source=$1
-       local offset=$(($2))
-       local count=$(($3))
-
-       dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
-               ath10kcal_die "failed to extract calibration data from $source"
-}
-
-ath10kcal_extract() {
-       local part=$1
-       local offset=$(($2))
-       local count=$(($3))
-       local mtd
-
-       mtd=$(find_mtd_chardev $part)
-       [ -n "$mtd" ] || \
-               ath10kcal_die "no mtd device found for partition $part"
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-       dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
-               ath10kcal_die "failed to extract calibration data from $mtd"
-}
+. /lib/functions/caldata.sh
+. /lib/functions/k2t.sh
 
 ath10kcal_patch_mac() {
        local mac=$1
@@ -62,10 +36,6 @@ ath10kcal_patch_mac_crc() {
        }
 }
 
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/system.sh
-
 board=$(board_name)
 
 case "$FIRMWARE" in
@@ -74,7 +44,7 @@ case "$FIRMWARE" in
        comfast,cf-wr650ac-v1|\
        comfast,cf-wr650ac-v2|\
        yuncore,a770)
-               ath10kcal_extract "art" 0x5000 0x844
+               caldata_extract "art" 0x5000 0x844
                ;;
        devolo,dvl1200e|\
        devolo,dvl1200i|\
@@ -82,54 +52,54 @@ case "$FIRMWARE" in
        devolo,dvl1750e|\
        devolo,dvl1750i|\
        devolo,dvl1750x)
-               ath10kcal_extract "art" 0x5000 0x844
+               caldata_extract "art" 0x5000 0x844
                ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
                ;;
        dlink,dir-859-a1)
-               ath10kcal_extract "art" 0x5000 0x844
+               caldata_extract "art" 0x5000 0x844
                ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
                ;;
        elecom,wrc-1750ghbk2-i)
-               ath10kcal_extract "art" 0x5000 0x844
+               caldata_extract "art" 0x5000 0x844
                ;;
        engenius,ecb1750)
-               ath10kcal_extract "art" 0x5000 0x844
+               caldata_extract "art" 0x5000 0x844
                ath10kcal_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
                ;;
        engenius,epg5000|\
        iodata,wn-ac1167dgr|\
        iodata,wn-ac1600dgr2)
-               ath10kcal_extract "art" 0x5000 0x844
+               caldata_extract "art" 0x5000 0x844
                ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
                ;;
        engenius,ews511ap)
-               ath10kcal_extract "art" 0x5000 0x844
+               caldata_extract "art" 0x5000 0x844
                ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
                ;;
        glinet,gl-ar750|\
        glinet,gl-ar750s)
-               ath10kcal_extract "art" 0x5000 0x844
+               caldata_extract "art" 0x5000 0x844
                ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
                ;;
        glinet,gl-x750)
-               ath10kcal_extract "art" 0x5000 0x844
+               caldata_extract "art" 0x5000 0x844
                ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
                ;;
        nec,wg800hp)
-               ath10kcal_extract "art" 0x5000 0x844
+               caldata_extract "art" 0x5000 0x844
                ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 0x880)
                ;;
        ocedo,koala|\
        ocedo,ursus)
-               ath10kcal_extract "art" 0x5000 0x844
+               caldata_extract "art" 0x5000 0x844
                ath10kcal_patch_mac $(mtd_get_mac_binary art 0xc)
                ;;
        openmesh,om5p-ac-v2)
-               ath10kcal_extract "art" 0x5000 0x844
+               caldata_extract "art" 0x5000 0x844
                ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
                ;;
        qihoo,c301)
-               ath10kcal_extract "radiocfg" 0x5000 0x844
+               caldata_extract "radiocfg" 0x5000 0x844
                ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac)
                ;;
        tplink,archer-a7-v5|\
@@ -137,29 +107,29 @@ case "$FIRMWARE" in
        tplink,archer-c7-v4|\
        tplink,archer-c7-v5|\
        tplink,archer-c25-v1)
-               ath10kcal_extract "art" 0x5000 0x844
+               caldata_extract "art" 0x5000 0x844
                ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
                ;;
        tplink,archer-c5-v1|\
        tplink,archer-c7-v2)
-               ath10kcal_extract "art" 0x5000 0x844
+               caldata_extract "art" 0x5000 0x844
                ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1)
                ;;
        tplink,archer-d50-v1)
-               ath10kcal_extract "art" 0x5000 0x844
+               caldata_extract "art" 0x5000 0x844
                ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
                ;;
        tplink,re350k-v1)
-               ath10kcal_extract "art" 0x5000 0x844
+               caldata_extract "art" 0x5000 0x844
                ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2)
                ;;
        tplink,re355-v1|\
        tplink,re450-v1)
-               ath10kcal_extract "art" 0x5000 0x844
+               caldata_extract "art" 0x5000 0x844
                ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
                ;;
        tplink,re450-v2)
-               ath10kcal_extract "art" 0x5000 0x844
+               caldata_extract "art" 0x5000 0x844
                ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
                ;;
        ubnt,unifiac-lite|\
@@ -170,14 +140,14 @@ case "$FIRMWARE" in
        ubnt,nanostation-ac|\
        ubnt,nanostation-ac-loco|\
        ubnt,unifiac-pro)
-               ath10kcal_extract "EEPROM" 0x5000 0x844
+               caldata_extract "EEPROM" 0x5000 0x844
                ;;
        esac
        ;;
 "ath10k/pre-cal-pci-0000:00:00.0.bin")
        case $board in
        comfast,cf-e313ac)
-               ath10kcal_extract "art" 0x5000 0x2f20
+               caldata_extract "art" 0x5000 0x2f20
                ath10kcal_patch_mac_crc $(mtd_get_mac_binary art 0x6)
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
@@ -187,18 +157,18 @@ case "$FIRMWARE" in
        dlink,dir-842-c2|\
        dlink,dir-842-c3|\
        nec,wg1200cr)
-               ath10kcal_extract "art" 0x5000 0x2f20
+               caldata_extract "art" 0x5000 0x2f20
                ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac)
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                ;;
        netgear,ex6400|\
        netgear,ex7300)
-               ath10kcal_extract "caldata" 0x5000 0x2f20
+               caldata_extract "caldata" 0x5000 0x2f20
                ath10kcal_patch_mac $(mtd_get_mac_binary caldata 0xc)
                ;;
        phicomm,k2t)
-               ath10kcal_extract "art" 0x5000 0x2f20
+               caldata_extract "art" 0x5000 0x2f20
                ath10kcal_patch_mac_crc $(k2t_get_mac "5g_mac")
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
@@ -209,7 +179,7 @@ case "$FIRMWARE" in
        tplink,archer-c60-v1|\
        tplink,archer-c60-v2|\
        tplink,archer-c6-v2)
-               ath10kcal_extract "art" 0x5000 0x2f20
+               caldata_extract "art" 0x5000 0x2f20
                ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1)
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin

diff --git a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 305d5feda5e07c4bcd46a364d67f1cd326cc5338..2400eb998a4084a8303ee83d4d1b81d525121001 100644 (file)
--- a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -1,28 +1,9 @@
 #!/bin/sh
 # Based on gabors ralink wisoc implementation.
 
-rt2x00_eeprom_die() {
-       echo "rt2x00 eeprom: " "$*"
-       exit 1
-}
-
-rt2x00_eeprom_extract() {
-       local part=$1
-       local offset=$(($2))
-       local count=$(($3))
-       local mtd
-
-       mtd=$(find_mtd_part $part)
-       [ -n "$mtd" ] || \
-               rt2x00_eeprom_die "no mtd device found for partition $part"
-
-       dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count || \
-               rt2x00_eeprom_die "failed to extract from $mtd"
-}
-
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-. /lib/functions.sh
+. /lib/functions/caldata.sh
 
 board=$(board_name)
 
@@ -30,14 +11,14 @@ case "$FIRMWARE" in
 "rt2x00.eeprom" )
        case $board in
        hg556a_c)
-               rt2x00_eeprom_extract "cal_data" 0x1fe00 0x200
+               caldata_extract "cal_data" 0x1fe00 0x200
                ;;
        hg622 |\
        hg655b)
-               rt2x00_eeprom_extract "cal_data" 0x0 0x200
+               caldata_extract "cal_data" 0x0 0x200
                ;;
        *)
-               rt2x00_eeprom_die "board $board is not supported yet"
+               caldata_die "board $board is not supported yet"
                ;;
        esac
        ;;

diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index dfb0a0cf766f6ded237dd7452615cd71d848df56..61597ea6690b8a85cee733f8b7c9042db895476b 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -1,43 +1,8 @@
 #!/bin/sh
 
-. /lib/functions.sh
-
-ath10kcal_die() {
-       echo "ath10cal: " "$*"
-       exit 1
-}
-
-ath10kcal_extract() {
-       local part=$1
-       local offset=$(($2))
-       local count=$(($3))
-       local mtd
-
-       mtd=$(find_mtd_chardev $part)
-       [ -n "$mtd" ] || \
-               ath10kcal_die "no mtd device found for partition $part"
-
-       dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
-               ath10kcal_die "failed to extract calibration data from $mtd"
-}
-
-ath10kcal_ubi_extract() {
-       local part=$1
-       local offset=$(($2))
-       local count=$(($3))
-       local ubidev
-       local ubi
-
-       . /lib/upgrade/nand.sh
-
-       ubidev=$(nand_find_ubi $CI_UBIPART)
-       ubi=$(nand_find_volume $ubidev $part)
-       [ -n "$ubi" ] || \
-               ath10kcal_die "no UBI volume found for $part"
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-       dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
-               ath10kcal_die "failed to extract from $ubi"
-}
+. /lib/functions/caldata.sh
 
 ath10kcal_patch_mac_crc() {
        local mac=$1
@@ -64,26 +29,14 @@ ath10kcal_patch_mac_crc() {
                dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
 }
 
-ath10kcal_is_caldata_valid() {
-       local expected="$1"
-
-       magic=$(hexdump -v -n 2 -e '1/1 "%02x"' /lib/firmware/$FIRMWARE)
-       [[ "$magic" == "$expected" ]]
-       return $?
-}
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/system.sh
-
 board=$(board_name)
 
 case "$FIRMWARE" in
 "ath10k/cal-pci-0000:01:00.0.bin")
        case "$board" in
        meraki,mr33)
-               ath10kcal_ubi_extract "ART" 0x9000 0x844
-               ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 0x9000 0x844
+               caldata_extract_ubi "ART" 0x9000 0x844
+               caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
                ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1)
                ;;
        esac
@@ -91,7 +44,7 @@ case "$FIRMWARE" in
 "ath10k/pre-cal-pci-0000:01:00.0.bin")
        case "$board" in
        asus,map-ac2200)
-               ath10kcal_ubi_extract "Factory" 0x9000 0x2f20
+               caldata_extract_ubi "Factory" 0x9000 0x2f20
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                ;;
@@ -104,12 +57,12 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
                ;;
        linksys,ea8300)
-               ath10kcal_extract "ART" 0x9000 0x2f20
+               caldata_extract "ART" 0x9000 0x2f20
                # OEM assigns 4 sequential MACs
                ath10kcal_patch_mac_crc $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
                ;;
        openmesh,a62)
-               ath10kcal_extract "0:ART" 0x9000 0x2f20
+               caldata_extract "0:ART" 0x9000 0x2f20
                ;;
        esac
        ;;
@@ -120,14 +73,14 @@ case "$FIRMWARE" in
        glinet,gl-b1300 |\
        linksys,ea6350v3 |\
        qcom,ap-dk01.1-c1)
-               ath10kcal_extract "ART" 0x1000 0x2f20
+               caldata_extract "ART" 0x1000 0x2f20
                ;;
        asus,map-ac2200)
-               ath10kcal_ubi_extract "Factory" 0x1000 0x2f20
+               caldata_extract_ubi "Factory" 0x1000 0x2f20
                ;;
        asus,rt-ac58u)
                CI_UBIPART=UBI_DEV
-               ath10kcal_ubi_extract "Factory" 0x1000 0x2f20
+               caldata_extract_ubi "Factory" 0x1000 0x2f20
                ;;
        avm,fritzbox-4040)
                /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
@@ -147,29 +100,29 @@ case "$FIRMWARE" in
        openmesh,a62 |\
        qxwlan,e2600ac-c1 |\
        qxwlan,e2600ac-c2)
-               ath10kcal_extract "0:ART" 0x1000 0x2f20
+               caldata_extract "0:ART" 0x1000 0x2f20
                ;;
        engenius,ens620ext)
-               ath10kcal_extract "ART" 0x1000 0x2f20
+               caldata_extract "ART" 0x1000 0x2f20
                ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
                ;;
        linksys,ea8300)
-               ath10kcal_extract "ART" 0x1000 0x2f20
+               caldata_extract "ART" 0x1000 0x2f20
                ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
                ;;
        meraki,mr33)
-               ath10kcal_ubi_extract "ART" 0x1000 0x2f20
-               ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 0x1000 0x2f20
+               caldata_extract_ubi "ART" 0x1000 0x2f20
+               caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
                ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
                ;;
        netgear,ex6100v2 |\
        netgear,ex6150v2)
-               ath10kcal_extract "ART" 0x1000 0x2f20
+               caldata_extract "ART" 0x1000 0x2f20
                ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0x0)
                ;;
        zyxel,nbg6617 |\
        zyxel,wre6606)
-               ath10kcal_extract "ART" 0x1000 0x2f20
+               caldata_extract "ART" 0x1000 0x2f20
                ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
                ;;
        esac
@@ -181,14 +134,14 @@ case "$FIRMWARE" in
        glinet,gl-b1300 |\
        linksys,ea6350v3 |\
        qcom,ap-dk01.1-c1)
-               ath10kcal_extract "ART" 0x5000 0x2f20
+               caldata_extract "ART" 0x5000 0x2f20
                ;;
        asus,map-ac2200)
-               ath10kcal_ubi_extract "Factory" 0x5000 0x2f20
+               caldata_extract_ubi "Factory" 0x5000 0x2f20
                ;;
        asus,rt-ac58u)
                CI_UBIPART=UBI_DEV
-               ath10kcal_ubi_extract "Factory" 0x5000 0x2f20
+               caldata_extract_ubi "Factory" 0x5000 0x2f20
                ;;
        avm,fritzbox-4040)
                /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
@@ -208,29 +161,29 @@ case "$FIRMWARE" in
        openmesh,a62 |\
        qxwlan,e2600ac-c1 |\
        qxwlan,e2600ac-c2)
-               ath10kcal_extract "0:ART" 0x5000 0x2f20
+               caldata_extract "0:ART" 0x5000 0x2f20
                ;;
        engenius,ens620ext)
-               ath10kcal_extract "ART" 0x5000 0x2f20
+               caldata_extract "ART" 0x5000 0x2f20
                ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
                ;;
        linksys,ea8300)
-               ath10kcal_extract "ART" 0x5000 0x2f20
+               caldata_extract "ART" 0x5000 0x2f20
                ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
                ;;
        meraki,mr33)
-               ath10kcal_ubi_extract "ART" 0x5000 0x2f20
-               ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 0x5000 0x2f20
+               caldata_extract_ubi "ART" 0x5000 0x2f20
+               caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
                ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
                ;;
        netgear,ex6100v2 |\
        netgear,ex6150v2)
-               ath10kcal_extract "ART" 0x5000 0x2f20
+               caldata_extract "ART" 0x5000 0x2f20
                ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0xc)
                ;;
        zyxel,nbg6617 |\
        zyxel,wre6606)
-               ath10kcal_extract "ART" 0x5000 0x2f20
+               caldata_extract "ART" 0x5000 0x2f20
                ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
                ;;
        esac

diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index c0fb1db16d8791fd9762e54eec996e307b24821f..12b76ec33fb4fdc2e24e70e97833da49c3438344 100644 (file)
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -1,34 +1,8 @@
 #!/bin/sh
 
-. /lib/functions.sh
-
-ath10kcal_die() {
-       echo "ath10cal: " "$*"
-       exit 1
-}
-
-ath10kcal_from_file() {
-       local source=$1
-       local offset=$(($2))
-       local count=$(($3))
-
-       dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
-               ath10kcal_die "failed to extract calibration data from $source"
-}
-
-ath10kcal_extract() {
-       local part=$1
-       local offset=$(($2))
-       local count=$(($3))
-       local mtd
-
-       mtd=$(find_mtd_chardev $part)
-       [ -n "$mtd" ] || \
-               ath10kcal_die "no mtd device found for partition $part"
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-       dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
-               ath10kcal_die "failed to extract calibration data from $mtd"
-}
+. /lib/functions/caldata.sh
 
 ath10kcal_patch_mac_crc() {
        local mac=$1
@@ -55,43 +29,39 @@ ath10kcal_patch_mac_crc() {
                dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
 }
 
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/system.sh
-
 board=$(board_name)
 
 case "$FIRMWARE" in
 "ath10k/pre-cal-pci-0000:01:00.0.bin")
        case $board in
        buffalo,wxr-2533dhp)
-               ath10kcal_extract "ART" 0x1000 0x2f20
+               caldata_extract "ART" 0x1000 0x2f20
                ath10kcal_patch_mac_crc $(mtd_get_mac_binary ART 0x1e)
                ;;
        linksys,ea8500)
-               ath10kcal_extract "art" 0x1000 0x2f20
+               caldata_extract "art" 0x1000 0x2f20
                ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +1)
                ;;
        nec,wg2600hp)
-               ath10kcal_extract "ART" 0x1000 0x2f20
+               caldata_extract "ART" 0x1000 0x2f20
                ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary PRODUCTDATA 0xc) +1)
                ;;
        netgear,d7800 |\
        netgear,r7500v2 |\
        netgear,r7800)
-               ath10kcal_extract "art" 0x1000 0x2f20
+               caldata_extract "art" 0x1000 0x2f20
                ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x6) +1)
                ;;
        tplink,c2600)
-               ath10kcal_extract "radio" 0x1000 0x2f20
+               caldata_extract "radio" 0x1000 0x2f20
                ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary default-mac 0x8) -1)
                ;;
        tplink,vr2600v)
-               ath10kcal_extract "ART" 0x1000 0x2f20
+               caldata_extract "ART" 0x1000 0x2f20
                ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary default-mac 0x0) -1)
                ;;
        zyxel,nbg6817)
-               ath10kcal_extract "0:ART" 0x1000 0x2f20
+               caldata_extract "0:ART" 0x1000 0x2f20
                ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1)
                ;;
        esac
@@ -99,33 +69,33 @@ case "$FIRMWARE" in
 "ath10k/pre-cal-pci-0001:01:00.0.bin")
        case $board in
        buffalo,wxr-2533dhp)
-               ath10kcal_extract "ART" 0x5000 0x2f20
+               caldata_extract "ART" 0x5000 0x2f20
                ath10kcal_patch_mac_crc $(mtd_get_mac_binary ART 0x18)
                ;;
        linksys,ea8500)
-               ath10kcal_extract "art" 0x5000 0x2f20
+               caldata_extract "art" 0x5000 0x2f20
                ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +2)
                ;;
        nec,wg2600hp)
-               ath10kcal_extract "ART" 0x5000 0x2f20
+               caldata_extract "ART" 0x5000 0x2f20
                ath10kcal_patch_mac_crc $(mtd_get_mac_binary PRODUCTDATA 0xc)
                ;;
        netgear,d7800 |\
        netgear,r7500v2 |\
        netgear,r7800)
-               ath10kcal_extract "art" 0x5000 0x2f20
+               caldata_extract "art" 0x5000 0x2f20
                ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x6) +2)
                ;;
        tplink,c2600)
-               ath10kcal_extract "radio" 0x5000 0x2f20
+               caldata_extract "radio" 0x5000 0x2f20
                ath10kcal_patch_mac_crc $(mtd_get_mac_binary default-mac 0x8)
                ;;
        tplink,vr2600v)
-               ath10kcal_extract "ART" 0x5000 0x2f20
+               caldata_extract "ART" 0x5000 0x2f20
                ath10kcal_patch_mac_crc $(mtd_get_mac_binary default-mac 0x0)
                ;;
        zyxel,nbg6817)
-               ath10kcal_extract "0:ART" 0x5000 0x2f20
+               caldata_extract "0:ART" 0x5000 0x2f20
                ath10kcal_patch_mac_crc $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
                ;;
        esac

diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 6d7682a7f30247167ef79f4bd07dcb97ee2bec19..5b03fb0e01f21f7dcc764ad88b34707f63522ce7 100644 (file)
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -3,29 +3,7 @@
 
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-. /lib/functions.sh
-. /lib/functions/system.sh
-. /lib/upgrade/nand.sh
-
-ath10k_caldata_die() {
-       echo "ath10k caldata: " "$*"
-       exit 1
-}
-
-ath10k_caldata_extract_ubi() {
-       local part=$1
-       local offset=$2
-       local count=$3
-       local ubidev=$(nand_find_ubi $CI_UBIPART)
-       local ubi
-
-       ubi=$(nand_find_volume $ubidev $part)
-       [ -n "$ubi" ] || \
-               ath10k_caldata_die "no UBI volume found for $part"
-
-       dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
-               ath10k_caldata_die "failed to extract from $ubi"
-}
+. /lib/functions/caldata.sh
 
 ath10k_caldata_set_macaddr() {
        local macaddr=$1
@@ -39,11 +17,11 @@ case "$FIRMWARE" in
        board=$(board_name)
        case $board in
                bt,homehub-v5a)
-                       ath10k_caldata_extract_ubi "caldata" 20480 2116
+                       caldata_extract_ubi "caldata" 0x5000 0x844
                        ath10k_caldata_set_macaddr $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +3)
                        ;;
                *)
-                       ath10k_caldata_die "board $board is not supported yet"
+                       caldata_die "board $board is not supported yet"
                        ;;
        esac
        ;;

diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
index 2c4a5a17993abe9da15e691e7b69d66c411aae84..20160cb32b1b604e628d81b926b71a1bae860819 100644 (file)
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
@@ -3,15 +3,9 @@
 
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-. /lib/functions.sh
-. /lib/functions/system.sh
+. /lib/functions/caldata.sh
 . /lib/upgrade/nand.sh
 
-ath9k_eeprom_die() {
-       echo "ath9k eeprom: $*"
-       exit 1
-}
-
 ath9k_eeprom_extract_raw() {
        local source=$1
        local offset=$(($2))
@@ -28,25 +22,7 @@ ath9k_eeprom_extract_raw() {
        fi
 
        dd if=$source of=/lib/firmware/$FIRMWARE bs=$bs skip=$offset count=$size $conv 2>/dev/null || \
-                       ath9k_eeprom_die "failed to extract from $mtd"
-}
-
-ath9k_eeprom_extract_reverse() {
-       local part=$1
-       local offset=$2
-       local count=$(($3))
-       local mtd
-       local reversed
-       local caldata
-
-       mtd=$(find_mtd_chardev "$part")
-       reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
-
-       for byte in $reversed; do
-               caldata="\x${byte}${caldata}"
-       done
-
-       printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
+                       caldata_die "failed to extract from $mtd"
 }
 
 ath9k_eeprom_extract() {
@@ -57,7 +33,7 @@ ath9k_eeprom_extract() {
 
        mtd=$(find_mtd_chardev $part)
        [ -n "$mtd" ] || \
-               ath9k_eeprom_die "no mtd device found for partition $part"
+               caldata_die "no mtd device found for partition $part"
 
        ath9k_eeprom_extract_raw $mtd $offset $swap
 }
@@ -71,7 +47,7 @@ ath9k_ubi_eeprom_extract() {
 
        ubi=$(nand_find_volume $ubidev $part)
        [ -n "$ubi" ] || \
-               ath9k_eeprom_die "no UBI volume found for $part"
+               caldata_die "no UBI volume found for $part"
 
        ath9k_eeprom_extract_raw /dev/$ubi $offset $swap
 }
@@ -143,7 +119,7 @@ case "$FIRMWARE" in
                        avm,fritz3370-rev2-hynix|\
                        avm,fritz3370-rev2-micron|\
                        avm,fritz7362sl)
-                               ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440
+                               caldata_extract_reverse "urlader" 0x1541 0x440
                                ;;
                        avm,fritz7312|avm,fritz7320|avm,fritz7360sl)
                                ath9k_eeprom_extract "urlader" 0x985 0
@@ -155,7 +131,7 @@ case "$FIRMWARE" in
                                ath9k_eeprom_extract "boardconfig" 0x21000 0
                                ;;
                        *)
-                               ath9k_eeprom_die "board $board is not supported yet"
+                               caldata_die "board $board is not supported yet"
                                ;;
                esac
                ;;

diff --git a/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index dc66226d7bfb7ac5b8e38947e2db2d659da25682..bcde02593a14830a944339363f5777538bc91477 100644 (file)
--- a/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -1,25 +1,8 @@
 #!/bin/sh
 
-FW_FILE="/lib/firmware/$FIRMWARE"
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-ath9k_eeprom_die() {
-       echo "ath9k eeprom: " "$*" >&2
-       exit 1
-}
-
-ath9k_eeprom_extract() {
-       local part=$1
-       local offset=$(($2))
-       local count=$(($3))
-       local mtd
-
-       mtd=$(find_mtd_chardev $part)
-       [ -n "$mtd" ] || \
-               ath9k_eeprom_die "no mtd device found for partition $part"
-
-       dd if=$mtd bs=$offset skip=1 count=1 2>/dev/null | dd of=$FW_FILE bs=$count count=1 2>/dev/null || \
-               ath9k_eeprom_die "failed to extract from $mtd"
-}
+. /lib/functions/caldata.sh
 
 tpl_set_wireless_mac()
 {
@@ -29,25 +12,20 @@ tpl_set_wireless_mac()
        mac=$(mtd_get_mac_binary u-boot 0x4fc00)
        mac=$(macaddr_add $mac $offset)
 
-       macaddr_2bin $mac | dd bs=1 count=6 seek=2 conv=notrunc of=$FW_FILE 2>/dev/null
+       macaddr_2bin $mac | dd bs=1 count=6 seek=2 conv=notrunc of=/lib/firmware/$FIRMWARE 2>/dev/null
 }
 
-[ -e $FW_FILE ] && exit 0
-
-. /lib/functions.sh
-. /lib/functions/system.sh
-
 board=$(board_name)
 
 case "$FIRMWARE" in
 "pci_wmac0.eeprom")
        case $board in
        tplink,tl-wdr4900-v1)
-               ath9k_eeprom_extract "caldata" 0x1000 0x800
+               caldata_extract "caldata" 0x1000 0x800
                tpl_set_wireless_mac 0
                ;;
        *)
-               ath9k_eeprom_die "board $board is not supported yet"
+               caldata_die "board $board is not supported yet"
                ;;
        esac
        ;;
@@ -55,11 +33,11 @@ case "$FIRMWARE" in
 "pci_wmac1.eeprom")
        case $board in
        tplink,tl-wdr4900-v1)
-               ath9k_eeprom_extract "caldata" 0x5000 0x800
+               caldata_extract "caldata" 0x5000 0x800
                tpl_set_wireless_mac -1
                ;;
        *)
-               ath9k_eeprom_die "board $board is not supported yet"
+               caldata_die "board $board is not supported yet"
                ;;
        esac
        ;;

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 7b98936ec3595d04522bb0552857ce12c1a2e7fc..ec70d86dac902cac11bf57ac68295e2dca3359b3 100644 (file)
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -1,23 +1,8 @@
 #!/bin/sh
 
-rt2x00_eeprom_die() {
-       echo "rt2x00 eeprom: " "$*"
-       exit 1
-}
-
-rt2x00_eeprom_extract() {
-       local part=$1
-       local offset=$(($2))
-       local count=$(($3))
-       local mtd
-
-       mtd=$(find_mtd_part $part)
-       [ -n "$mtd" ] || \
-               rt2x00_eeprom_die "no mtd device found for partition $part"
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-       dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
-               rt2x00_eeprom_die "failed to extract from $mtd"
-}
+. /lib/functions/caldata.sh
 
 jboot_eeprom_extract() {
        local part=$1
@@ -26,29 +11,23 @@ jboot_eeprom_extract() {
 
        mtd=$(find_mtd_part $part)
        [ -n "$mtd" ] || \
-               rt2x00_eeprom_die "no mtd device found for partition $part"
+               caldata_die "no mtd device found for partition $part"
 
        jboot_config_read -i $mtd -o $offset -e /lib/firmware/$FIRMWARE  2>/dev/null || \
-               rt2x00_eeprom_die "failed to extract from $mtd"
+               caldata_die "failed to extract from $mtd"
 }
 
 rt2x00_eeprom_set_macaddr() {
        local macaddr=$1
 
        [ -n "$macaddr" ] || \
-               rt2x00_eeprom_die "invalid wlan mac address"
+               caldata_die "invalid wlan mac address"
 
        macaddr_2bin $macaddr | dd of=/lib/firmware/$FIRMWARE \
                                conv=notrunc oflag=seek_bytes bs=6 seek=4 count=1 2>/dev/null || \
-               rt2x00_eeprom_die "failed to write mac address to eeprom file"
+               caldata_die "failed to write mac address to eeprom file"
 }
 
-FW="/lib/firmware/$FIRMWARE"
-[ -e "$FW" ] && exit 0
-
-. /lib/functions.sh
-. /lib/functions/system.sh
-
 board=$(board_name)
 
 case "$FIRMWARE" in
@@ -68,11 +47,11 @@ case "$FIRMWARE" in
                ;;
        dovado,tiny-ac)
                wifi_mac=$(mtd_get_mac_ascii u-boot-env INIC_MAC_ADDR)
-               rt2x00_eeprom_extract "factory" 0x0 0x200
+               caldata_extract "factory" 0x0 0x200
                rt2x00_eeprom_set_macaddr $wifi_mac
                ;;
        *)
-               rt2x00_eeprom_die "Please define mtd-eeprom in $board DTS file!"
+               caldata_die "Please define mtd-eeprom in $board DTS file!"
                ;;
        esac
        ;;