#include <linux/kthread.h>
#include <linux/kernel.h>
#include <linux/syscalls.h>
+#include <linux/spinlock.h>
+#include <linux/rcupdate.h>
+#include <linux/mutex.h>
+#include <linux/gfp.h>
#include <linux/audit.h>
/* If auditing cannot proceed, audit_failure selects what happens. */
static u32 audit_failure = AUDIT_FAIL_PRINTK;
-/*
- * If audit records are to be written to the netlink socket, audit_pid
- * contains the pid of the auditd process and audit_nlk_portid contains
- * the portid to use to send netlink messages to that process.
+/* private audit network namespace index */
+static unsigned int audit_net_id;
+
+/**
+ * struct audit_net - audit private network namespace data
+ * @sk: communication socket
+ */
+struct audit_net {
+ struct sock *sk;
+};
+
+/**
+ * struct auditd_connection - kernel/auditd connection state
+ * @pid: auditd PID
+ * @portid: netlink portid
+ * @net: the associated network namespace
+ * @lock: spinlock to protect write access
+ *
+ * Description:
+ * This struct is RCU protected; you must either hold the RCU lock for reading
+ * or the included spinlock for writing.
*/
-int audit_pid;
-static __u32 audit_nlk_portid;
+static struct auditd_connection {
+ int pid;
+ u32 portid;
+ struct net *net;
+ spinlock_t lock;
+} auditd_conn;
/* If audit_rate_limit is non-zero, limit the rate of sending audit records
* to that number per second. This prevents DoS attacks, but results in
*/
static atomic_t audit_lost = ATOMIC_INIT(0);
-/* The netlink socket. */
-static struct sock *audit_sock;
-static unsigned int audit_net_id;
-
/* Hash for inode-based rules */
struct list_head audit_inode_hash[AUDIT_INODE_BUCKETS];
/* queue msgs to send via kauditd_task */
static struct sk_buff_head audit_queue;
+static void kauditd_hold_skb(struct sk_buff *skb);
/* queue msgs due to temporary unicast send problems */
static struct sk_buff_head audit_retry_queue;
/* queue msgs waiting for new auditd connection */
struct sk_buff *skb;
};
+/**
+ * auditd_test_task - Check to see if a given task is an audit daemon
+ * @task: the task to check
+ *
+ * Description:
+ * Return 1 if the task is a registered audit daemon, 0 otherwise.
+ */
+int auditd_test_task(const struct task_struct *task)
+{
+ int rc;
+
+ rcu_read_lock();
+ rc = (auditd_conn.pid && task->tgid == auditd_conn.pid ? 1 : 0);
+ rcu_read_unlock();
+
+ return rc;
+}
+
+/**
+ * audit_get_sk - Return the audit socket for the given network namespace
+ * @net: the destination network namespace
+ *
+ * Description:
+ * Returns the sock pointer if valid, NULL otherwise. The caller must ensure
+ * that a reference is held for the network namespace while the sock is in use.
+ */
+static struct sock *audit_get_sk(const struct net *net)
+{
+ struct audit_net *aunet;
+
+ if (!net)
+ return NULL;
+
+ aunet = net_generic(net, audit_net_id);
+ return aunet->sk;
+}
+
static void audit_set_portid(struct audit_buffer *ab, __u32 portid)
{
if (ab) {
pr_err("%s\n", message);
break;
case AUDIT_FAIL_PANIC:
- /* test audit_pid since printk is always losey, why bother? */
- if (audit_pid)
- panic("audit: %s\n", message);
+ panic("audit: %s\n", message);
break;
}
}
return audit_do_config_change("audit_failure", &audit_failure, state);
}
-/*
- * For one reason or another this nlh isn't getting delivered to the userspace
- * audit daemon, just send it to printk.
+/**
+ * auditd_set - Set/Reset the auditd connection state
+ * @pid: auditd PID
+ * @portid: auditd netlink portid
+ * @net: auditd network namespace pointer
+ *
+ * Description:
+ * This function will obtain and drop network namespace references as
+ * necessary.
+ */
+static void auditd_set(int pid, u32 portid, struct net *net)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&auditd_conn.lock, flags);
+ auditd_conn.pid = pid;
+ auditd_conn.portid = portid;
+ if (auditd_conn.net)
+ put_net(auditd_conn.net);
+ if (net)
+ auditd_conn.net = get_net(net);
+ else
+ auditd_conn.net = NULL;
+ spin_unlock_irqrestore(&auditd_conn.lock, flags);
+}
+
+/**
+ * auditd_reset - Disconnect the auditd connection
+ *
+ * Description:
+ * Break the auditd/kauditd connection and move all the queued records into the
+ * hold queue in case auditd reconnects.
+ */
+static void auditd_reset(void)
+{
+ struct sk_buff *skb;
+
+ /* if it isn't already broken, break the connection */
+ rcu_read_lock();
+ if (auditd_conn.pid)
+ auditd_set(0, 0, NULL);
+ rcu_read_unlock();
+
+ /* flush all of the main and retry queues to the hold queue */
+ while ((skb = skb_dequeue(&audit_retry_queue)))
+ kauditd_hold_skb(skb);
+ while ((skb = skb_dequeue(&audit_queue)))
+ kauditd_hold_skb(skb);
+}
+
+/**
+ * kauditd_print_skb - Print the audit record to the ring buffer
+ * @skb: audit record
+ *
+ * Whatever the reason, this packet may not make it to the auditd connection
+ * so write it via printk so the information isn't completely lost.
*/
static void kauditd_printk_skb(struct sk_buff *skb)
{
struct nlmsghdr *nlh = nlmsg_hdr(skb);
char *data = nlmsg_data(nlh);
- if (nlh->nlmsg_type != AUDIT_EOE) {
- if (printk_ratelimit())
- pr_notice("type=%d %s\n", nlh->nlmsg_type, data);
- else
- audit_log_lost("printk limit exceeded");
- }
+ if (nlh->nlmsg_type != AUDIT_EOE && printk_ratelimit())
+ pr_notice("type=%d %s\n", nlh->nlmsg_type, data);
+}
+
+/**
+ * kauditd_rehold_skb - Handle a audit record send failure in the hold queue
+ * @skb: audit record
+ *
+ * Description:
+ * This should only be used by the kauditd_thread when it fails to flush the
+ * hold queue.
+ */
+static void kauditd_rehold_skb(struct sk_buff *skb)
+{
+ /* put the record back in the queue at the same place */
+ skb_queue_head(&audit_hold_queue, skb);
+
+ /* fail the auditd connection */
+ auditd_reset();
}
/**
/* we have no other options - drop the message */
audit_log_lost("kauditd hold queue overflow");
kfree_skb(skb);
+
+ /* fail the auditd connection */
+ auditd_reset();
}
/**
}
/**
- * auditd_reset - Disconnect the auditd connection
+ * auditd_send_unicast_skb - Send a record via unicast to auditd
+ * @skb: audit record
*
* Description:
- * Break the auditd/kauditd connection and move all the records in the retry
- * queue into the hold queue in case auditd reconnects. The audit_cmd_mutex
- * must be held when calling this function.
+ * Send a skb to the audit daemon, returns positive/zero values on success and
+ * negative values on failure; in all cases the skb will be consumed by this
+ * function. If the send results in -ECONNREFUSED the connection with auditd
+ * will be reset. This function may sleep so callers should not hold any locks
+ * where this would cause a problem.
*/
-static void auditd_reset(void)
+static int auditd_send_unicast_skb(struct sk_buff *skb)
{
- struct sk_buff *skb;
-
- /* break the connection */
- if (audit_sock) {
- sock_put(audit_sock);
- audit_sock = NULL;
+ int rc;
+ u32 portid;
+ struct net *net;
+ struct sock *sk;
+
+ /* NOTE: we can't call netlink_unicast while in the RCU section so
+ * take a reference to the network namespace and grab local
+ * copies of the namespace, the sock, and the portid; the
+ * namespace and sock aren't going to go away while we hold a
+ * reference and if the portid does become invalid after the RCU
+ * section netlink_unicast() should safely return an error */
+
+ rcu_read_lock();
+ if (!auditd_conn.pid) {
+ rcu_read_unlock();
+ rc = -ECONNREFUSED;
+ goto err;
}
- audit_pid = 0;
- audit_nlk_portid = 0;
+ net = auditd_conn.net;
+ get_net(net);
+ sk = audit_get_sk(net);
+ portid = auditd_conn.portid;
+ rcu_read_unlock();
- /* flush all of the retry queue to the hold queue */
- while ((skb = skb_dequeue(&audit_retry_queue)))
- kauditd_hold_skb(skb);
+ rc = netlink_unicast(sk, skb, portid, 0);
+ put_net(net);
+ if (rc < 0)
+ goto err;
+
+ return rc;
+
+err:
+ if (rc == -ECONNREFUSED)
+ auditd_reset();
+ return rc;
}
/**
- * kauditd_send_unicast_skb - Send a record via unicast to auditd
- * @skb: audit record
+ * kauditd_send_queue - Helper for kauditd_thread to flush skb queues
+ * @sk: the sending sock
+ * @portid: the netlink destination
+ * @queue: the skb queue to process
+ * @retry_limit: limit on number of netlink unicast failures
+ * @skb_hook: per-skb hook for additional processing
+ * @err_hook: hook called if the skb fails the netlink unicast send
+ *
+ * Description:
+ * Run through the given queue and attempt to send the audit records to auditd,
+ * returns zero on success, negative values on failure. It is up to the caller
+ * to ensure that the @sk is valid for the duration of this function.
+ *
*/
-static int kauditd_send_unicast_skb(struct sk_buff *skb)
+static int kauditd_send_queue(struct sock *sk, u32 portid,
+ struct sk_buff_head *queue,
+ unsigned int retry_limit,
+ void (*skb_hook)(struct sk_buff *skb),
+ void (*err_hook)(struct sk_buff *skb))
{
- int rc;
+ int rc = 0;
+ struct sk_buff *skb;
+ static unsigned int failed = 0;
- /* if we know nothing is connected, don't even try the netlink call */
- if (!audit_pid)
- return -ECONNREFUSED;
+ /* NOTE: kauditd_thread takes care of all our locking, we just use
+ * the netlink info passed to us (e.g. sk and portid) */
+
+ while ((skb = skb_dequeue(queue))) {
+ /* call the skb_hook for each skb we touch */
+ if (skb_hook)
+ (*skb_hook)(skb);
+
+ /* can we send to anyone via unicast? */
+ if (!sk) {
+ if (err_hook)
+ (*err_hook)(skb);
+ continue;
+ }
- /* get an extra skb reference in case we fail to send */
- skb_get(skb);
- rc = netlink_unicast(audit_sock, skb, audit_nlk_portid, 0);
- if (rc >= 0) {
- consume_skb(skb);
- rc = 0;
+ /* grab an extra skb reference in case of error */
+ skb_get(skb);
+ rc = netlink_unicast(sk, skb, portid, 0);
+ if (rc < 0) {
+ /* fatal failure for our queue flush attempt? */
+ if (++failed >= retry_limit ||
+ rc == -ECONNREFUSED || rc == -EPERM) {
+ /* yes - error processing for the queue */
+ sk = NULL;
+ if (err_hook)
+ (*err_hook)(skb);
+ if (!skb_hook)
+ goto out;
+ /* keep processing with the skb_hook */
+ continue;
+ } else
+ /* no - requeue to preserve ordering */
+ skb_queue_head(queue, skb);
+ } else {
+ /* it worked - drop the extra reference and continue */
+ consume_skb(skb);
+ failed = 0;
+ }
}
- return rc;
+out:
+ return (rc >= 0 ? 0 : rc);
}
/*
* @skb: audit record
*
* Description:
- * This function doesn't consume an skb as might be expected since it has to
- * copy it anyways.
+ * Write a multicast message to anyone listening in the initial network
+ * namespace. This function doesn't consume an skb as might be expected since
+ * it has to copy it anyways.
*/
static void kauditd_send_multicast_skb(struct sk_buff *skb)
{
struct sk_buff *copy;
- struct audit_net *aunet = net_generic(&init_net, audit_net_id);
- struct sock *sock = aunet->nlsk;
+ struct sock *sock = audit_get_sk(&init_net);
struct nlmsghdr *nlh;
+ /* NOTE: we are not taking an additional reference for init_net since
+ * we don't have to worry about it going away */
+
if (!netlink_has_listeners(sock, AUDIT_NLGRP_READLOG))
return;
}
/**
- * kauditd_wake_condition - Return true when it is time to wake kauditd_thread
- *
- * Description:
- * This function is for use by the wait_event_freezable() call in
- * kauditd_thread().
+ * kauditd_thread - Worker thread to send audit records to userspace
+ * @dummy: unused
*/
-static int kauditd_wake_condition(void)
-{
- static int pid_last = 0;
- int rc;
- int pid = audit_pid;
-
- /* wake on new messages or a change in the connected auditd */
- rc = skb_queue_len(&audit_queue) || (pid && pid != pid_last);
- if (rc)
- pid_last = pid;
-
- return rc;
-}
-
static int kauditd_thread(void *dummy)
{
int rc;
- int auditd = 0;
- int reschedule = 0;
- struct sk_buff *skb;
- struct nlmsghdr *nlh;
+ u32 portid = 0;
+ struct net *net = NULL;
+ struct sock *sk = NULL;
#define UNICAST_RETRIES 5
-#define AUDITD_BAD(x,y) \
- ((x) == -ECONNREFUSED || (x) == -EPERM || ++(y) >= UNICAST_RETRIES)
-
- /* NOTE: we do invalidate the auditd connection flag on any sending
- * errors, but we only "restore" the connection flag at specific places
- * in the loop in order to help ensure proper ordering of audit
- * records */
set_freezable();
while (!kthread_should_stop()) {
- /* NOTE: possible area for future improvement is to look at
- * the hold and retry queues, since only this thread
- * has access to these queues we might be able to do
- * our own queuing and skip some/all of the locking */
-
- /* NOTE: it might be a fun experiment to split the hold and
- * retry queue handling to another thread, but the
- * synchronization issues and other overhead might kill
- * any performance gains */
+ /* NOTE: see the lock comments in auditd_send_unicast_skb() */
+ rcu_read_lock();
+ if (!auditd_conn.pid) {
+ rcu_read_unlock();
+ goto main_queue;
+ }
+ net = auditd_conn.net;
+ get_net(net);
+ sk = audit_get_sk(net);
+ portid = auditd_conn.portid;
+ rcu_read_unlock();
/* attempt to flush the hold queue */
- while (auditd && (skb = skb_dequeue(&audit_hold_queue))) {
- rc = kauditd_send_unicast_skb(skb);
- if (rc) {
- /* requeue to the same spot */
- skb_queue_head(&audit_hold_queue, skb);
-
- auditd = 0;
- if (AUDITD_BAD(rc, reschedule)) {
- mutex_lock(&audit_cmd_mutex);
- auditd_reset();
- mutex_unlock(&audit_cmd_mutex);
- reschedule = 0;
- }
- } else
- /* we were able to send successfully */
- reschedule = 0;
+ rc = kauditd_send_queue(sk, portid,
+ &audit_hold_queue, UNICAST_RETRIES,
+ NULL, kauditd_rehold_skb);
+ if (rc < 0) {
+ sk = NULL;
+ goto main_queue;
}
/* attempt to flush the retry queue */
- while (auditd && (skb = skb_dequeue(&audit_retry_queue))) {
- rc = kauditd_send_unicast_skb(skb);
- if (rc) {
- auditd = 0;
- if (AUDITD_BAD(rc, reschedule)) {
- kauditd_hold_skb(skb);
- mutex_lock(&audit_cmd_mutex);
- auditd_reset();
- mutex_unlock(&audit_cmd_mutex);
- reschedule = 0;
- } else
- /* temporary problem (we hope), queue
- * to the same spot and retry */
- skb_queue_head(&audit_retry_queue, skb);
- } else
- /* we were able to send successfully */
- reschedule = 0;
+ rc = kauditd_send_queue(sk, portid,
+ &audit_retry_queue, UNICAST_RETRIES,
+ NULL, kauditd_hold_skb);
+ if (rc < 0) {
+ sk = NULL;
+ goto main_queue;
}
- /* standard queue processing, try to be as quick as possible */
-quick_loop:
- skb = skb_dequeue(&audit_queue);
- if (skb) {
- /* setup the netlink header, see the comments in
- * kauditd_send_multicast_skb() for length quirks */
- nlh = nlmsg_hdr(skb);
- nlh->nlmsg_len = skb->len - NLMSG_HDRLEN;
-
- /* attempt to send to any multicast listeners */
- kauditd_send_multicast_skb(skb);
-
- /* attempt to send to auditd, queue on failure */
- if (auditd) {
- rc = kauditd_send_unicast_skb(skb);
- if (rc) {
- auditd = 0;
- if (AUDITD_BAD(rc, reschedule)) {
- mutex_lock(&audit_cmd_mutex);
- auditd_reset();
- mutex_unlock(&audit_cmd_mutex);
- reschedule = 0;
- }
-
- /* move to the retry queue */
- kauditd_retry_skb(skb);
- } else
- /* everything is working so go fast! */
- goto quick_loop;
- } else if (reschedule)
- /* we are currently having problems, move to
- * the retry queue */
- kauditd_retry_skb(skb);
- else
- /* dump the message via printk and hold it */
- kauditd_hold_skb(skb);
- } else {
- /* we have flushed the backlog so wake everyone */
- wake_up(&audit_backlog_wait);
-
- /* if everything is okay with auditd (if present), go
- * to sleep until there is something new in the queue
- * or we have a change in the connected auditd;
- * otherwise simply reschedule to give things a chance
- * to recover */
- if (reschedule) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule();
- } else
- wait_event_freezable(kauditd_wait,
- kauditd_wake_condition());
-
- /* update the auditd connection status */
- auditd = (audit_pid ? 1 : 0);
+main_queue:
+ /* process the main queue - do the multicast send and attempt
+ * unicast, dump failed record sends to the retry queue; if
+ * sk == NULL due to previous failures we will just do the
+ * multicast send and move the record to the retry queue */
+ kauditd_send_queue(sk, portid, &audit_queue, 1,
+ kauditd_send_multicast_skb,
+ kauditd_retry_skb);
+
+ /* drop our netns reference, no auditd sends past this line */
+ if (net) {
+ put_net(net);
+ net = NULL;
}
+ sk = NULL;
+
+ /* we have processed all the queues so wake everyone */
+ wake_up(&audit_backlog_wait);
+
+ /* NOTE: we want to wake up if there is anything on the queue,
+ * regardless of if an auditd is connected, as we need to
+ * do the multicast send and rotate records from the
+ * main queue to the retry/hold queues */
+ wait_event_freezable(kauditd_wait,
+ (skb_queue_len(&audit_queue) ? 1 : 0));
}
return 0;
{
struct audit_netlink_list *dest = _dest;
struct sk_buff *skb;
- struct net *net = dest->net;
- struct audit_net *aunet = net_generic(net, audit_net_id);
+ struct sock *sk = audit_get_sk(dest->net);
/* wait for parent to finish and send an ACK */
mutex_lock(&audit_cmd_mutex);
mutex_unlock(&audit_cmd_mutex);
while ((skb = __skb_dequeue(&dest->q)) != NULL)
- netlink_unicast(aunet->nlsk, skb, dest->portid, 0);
+ netlink_unicast(sk, skb, dest->portid, 0);
- put_net(net);
+ put_net(dest->net);
kfree(dest);
return 0;
static int audit_send_reply_thread(void *arg)
{
struct audit_reply *reply = (struct audit_reply *)arg;
- struct net *net = reply->net;
- struct audit_net *aunet = net_generic(net, audit_net_id);
+ struct sock *sk = audit_get_sk(reply->net);
mutex_lock(&audit_cmd_mutex);
mutex_unlock(&audit_cmd_mutex);
/* Ignore failure. It'll only happen if the sender goes away,
because our timeout is set to infinite. */
- netlink_unicast(aunet->nlsk , reply->skb, reply->portid, 0);
- put_net(net);
+ netlink_unicast(sk, reply->skb, reply->portid, 0);
+ put_net(reply->net);
kfree(reply);
return 0;
}
static int audit_replace(pid_t pid)
{
- struct sk_buff *skb = audit_make_reply(0, 0, AUDIT_REPLACE, 0, 0,
- &pid, sizeof(pid));
+ struct sk_buff *skb;
+ skb = audit_make_reply(0, 0, AUDIT_REPLACE, 0, 0, &pid, sizeof(pid));
if (!skb)
return -ENOMEM;
- return netlink_unicast(audit_sock, skb, audit_nlk_portid, 0);
+ return auditd_send_unicast_skb(skb);
}
static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
memset(&s, 0, sizeof(s));
s.enabled = audit_enabled;
s.failure = audit_failure;
- s.pid = audit_pid;
+ rcu_read_lock();
+ s.pid = auditd_conn.pid;
+ rcu_read_unlock();
s.rate_limit = audit_rate_limit;
s.backlog_limit = audit_backlog_limit;
s.lost = atomic_read(&audit_lost);
* from the initial pid namespace, but something
* to keep in mind if this changes */
int new_pid = s.pid;
+ pid_t auditd_pid;
pid_t requesting_pid = task_tgid_vnr(current);
- if ((!new_pid) && (requesting_pid != audit_pid)) {
- audit_log_config_change("audit_pid", new_pid, audit_pid, 0);
+ /* test the auditd connection */
+ audit_replace(requesting_pid);
+
+ rcu_read_lock();
+ auditd_pid = auditd_conn.pid;
+ /* only the current auditd can unregister itself */
+ if ((!new_pid) && (requesting_pid != auditd_pid)) {
+ rcu_read_unlock();
+ audit_log_config_change("audit_pid", new_pid,
+ auditd_pid, 0);
return -EACCES;
}
- if (audit_pid && new_pid &&
- audit_replace(requesting_pid) != -ECONNREFUSED) {
- audit_log_config_change("audit_pid", new_pid, audit_pid, 0);
+ /* replacing a healthy auditd is not allowed */
+ if (auditd_pid && new_pid) {
+ rcu_read_unlock();
+ audit_log_config_change("audit_pid", new_pid,
+ auditd_pid, 0);
return -EEXIST;
}
+ rcu_read_unlock();
+
if (audit_enabled != AUDIT_OFF)
- audit_log_config_change("audit_pid", new_pid, audit_pid, 1);
+ audit_log_config_change("audit_pid", new_pid,
+ auditd_pid, 1);
+
if (new_pid) {
- if (audit_sock)
- sock_put(audit_sock);
- audit_pid = new_pid;
- audit_nlk_portid = NETLINK_CB(skb).portid;
- sock_hold(skb->sk);
- audit_sock = skb->sk;
- } else {
+ /* register a new auditd connection */
+ auditd_set(new_pid,
+ NETLINK_CB(skb).portid,
+ sock_net(NETLINK_CB(skb).sk));
+ /* try to process any backlog */
+ wake_up_interruptible(&kauditd_wait);
+ } else
+ /* unregister the auditd connection */
auditd_reset();
- }
- wake_up_interruptible(&kauditd_wait);
}
if (s.mask & AUDIT_STATUS_RATE_LIMIT) {
err = audit_set_rate_limit(s.rate_limit);
if (err)
break;
}
- mutex_unlock(&audit_cmd_mutex);
audit_log_common_recv_msg(&ab, msg_type);
if (msg_type != AUDIT_USER_TTY)
audit_log_format(ab, " msg='%.*s'",
}
audit_set_portid(ab, NETLINK_CB(skb).portid);
audit_log_end(ab);
- mutex_lock(&audit_cmd_mutex);
}
break;
case AUDIT_ADD_RULE:
struct audit_net *aunet = net_generic(net, audit_net_id);
- aunet->nlsk = netlink_kernel_create(net, NETLINK_AUDIT, &cfg);
- if (aunet->nlsk == NULL) {
+ aunet->sk = netlink_kernel_create(net, NETLINK_AUDIT, &cfg);
+ if (aunet->sk == NULL) {
audit_panic("cannot initialize netlink socket in namespace");
return -ENOMEM;
}
- aunet->nlsk->sk_sndtimeo = MAX_SCHEDULE_TIMEOUT;
+ aunet->sk->sk_sndtimeo = MAX_SCHEDULE_TIMEOUT;
+
return 0;
}
static void __net_exit audit_net_exit(struct net *net)
{
struct audit_net *aunet = net_generic(net, audit_net_id);
- struct sock *sock = aunet->nlsk;
- mutex_lock(&audit_cmd_mutex);
- if (sock == audit_sock)
+
+ rcu_read_lock();
+ if (net == auditd_conn.net)
auditd_reset();
- mutex_unlock(&audit_cmd_mutex);
+ rcu_read_unlock();
- netlink_kernel_release(sock);
- aunet->nlsk = NULL;
+ netlink_kernel_release(aunet->sk);
}
static struct pernet_operations audit_net_ops __net_initdata = {
if (audit_initialized == AUDIT_DISABLED)
return 0;
- pr_info("initializing netlink subsys (%s)\n",
- audit_default ? "enabled" : "disabled");
- register_pernet_subsys(&audit_net_ops);
+ memset(&auditd_conn, 0, sizeof(auditd_conn));
+ spin_lock_init(&auditd_conn.lock);
skb_queue_head_init(&audit_queue);
skb_queue_head_init(&audit_retry_queue);
skb_queue_head_init(&audit_hold_queue);
- audit_initialized = AUDIT_INITIALIZED;
- audit_enabled = audit_default;
- audit_ever_enabled |= !!audit_default;
for (i = 0; i < AUDIT_INODE_BUCKETS; i++)
INIT_LIST_HEAD(&audit_inode_hash[i]);
+ pr_info("initializing netlink subsys (%s)\n",
+ audit_default ? "enabled" : "disabled");
+ register_pernet_subsys(&audit_net_ops);
+
+ audit_initialized = AUDIT_INITIALIZED;
+ audit_enabled = audit_default;
+ audit_ever_enabled |= !!audit_default;
+
kauditd_task = kthread_run(kauditd_thread, NULL, "kauditd");
if (IS_ERR(kauditd_task)) {
int err = PTR_ERR(kauditd_task);
if (unlikely(!audit_filter(type, AUDIT_FILTER_TYPE)))
return NULL;
- /* don't ever fail/sleep on these two conditions:
+ /* NOTE: don't ever fail/sleep on these two conditions:
* 1. auditd generated record - since we need auditd to drain the
* queue; also, when we are checking for auditd, compare PIDs using
* task_tgid_vnr() since auditd_pid is set in audit_receive_msg()
* using a PID anchored in the caller's namespace
- * 2. audit command message - record types 1000 through 1099 inclusive
- * are command messages/records used to manage the kernel subsystem
- * and the audit userspace, blocking on these messages could cause
- * problems under load so don't do it (note: not all of these
- * command types are valid as record types, but it is quicker to
- * just check two ints than a series of ints in a if/switch stmt) */
- if (!((audit_pid && audit_pid == task_tgid_vnr(current)) ||
- (type >= 1000 && type <= 1099))) {
- long sleep_time = audit_backlog_wait_time;
+ * 2. generator holding the audit_cmd_mutex - we don't want to block
+ * while holding the mutex */
+ if (!(auditd_test_task(current) ||
+ (current == __mutex_owner(&audit_cmd_mutex)))) {
+ long stime = audit_backlog_wait_time;
while (audit_backlog_limit &&
(skb_queue_len(&audit_queue) > audit_backlog_limit)) {
/* sleep if we are allowed and we haven't exhausted our
* backlog wait limit */
- if ((gfp_mask & __GFP_DIRECT_RECLAIM) &&
- (sleep_time > 0)) {
+ if (gfpflags_allow_blocking(gfp_mask) && (stime > 0)) {
DECLARE_WAITQUEUE(wait, current);
add_wait_queue_exclusive(&audit_backlog_wait,
&wait);
set_current_state(TASK_UNINTERRUPTIBLE);
- sleep_time = schedule_timeout(sleep_time);
+ stime = schedule_timeout(stime);
remove_wait_queue(&audit_backlog_wait, &wait);
} else {
if (audit_rate_check() && printk_ratelimit())
*/
void audit_log_end(struct audit_buffer *ab)
{
+ struct sk_buff *skb;
+ struct nlmsghdr *nlh;
+
if (!ab)
return;
- if (!audit_rate_check()) {
- audit_log_lost("rate limit exceeded");
- } else {
- skb_queue_tail(&audit_queue, ab->skb);
- wake_up_interruptible(&kauditd_wait);
+
+ if (audit_rate_check()) {
+ skb = ab->skb;
ab->skb = NULL;
- }
+
+ /* setup the netlink header, see the comments in
+ * kauditd_send_multicast_skb() for length quirks */
+ nlh = nlmsg_hdr(skb);
+ nlh->nlmsg_len = skb->len - NLMSG_HDRLEN;
+
+ /* queue the netlink packet and poke the kauditd thread */
+ skb_queue_tail(&audit_queue, skb);
+ wake_up_interruptible(&kauditd_wait);
+ } else
+ audit_log_lost("rate limit exceeded");
+
audit_buffer_free(ab);
}
projects / openwrt / staging / blogic.git / commitdiff