--- /dev/null
+config interface loopback
+ option ifname lo
+ option proto static
+ option ipaddr 127.0.0.1
+ option netmask 255.0.0.0
+
+config interface lan
+ option ifname eth0
+ option type bridge
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
+
+config interface wan
+ option ifname eth1
+ option proto dhcp
+
+config switch eth0
+ option enable_vlan 1
+
+config switch_vlan
+ option device eth0
+ option vlan 1
+ option ports "0 1 2 3 4"
tew-632brp)
status_led="tew-632brp:green:status"
;;
- tl-mr3420)
- status_led="tl-mr3420:green:system"
+ tl-mr3220 | tl-mr3420)
+ status_led="tl-mr3x20:green:system"
;;
tl-wa901nd)
status_led="tl-wa901nd:green:system"
*"DIR-615 rev. C1")
name="dir-615-c1"
;;
+ *TL-MR3220)
+ name="tl-mr3220"
+ ;;
*TL-MR3420)
name="tl-mr3420"
;;
}
return 0
;;
- tl-mr3420 | tl-wa901nd | tl-wr741nd | tl-wr841n-v1 | tl-wr941nd | tl-wr1043nd)
+ tl-mr3220 | tl-mr3420 | tl-wa901nd | tl-wr741nd | tl-wr841n-v1 | tl-wr941nd | tl-wr1043nd)
[ "$magic" != "0100" ] && {
echo "Invalid image type."
return 1
CONFIG_AR71XX_MACH_RB4XX=y
CONFIG_AR71XX_MACH_RB750=y
CONFIG_AR71XX_MACH_TEW_632BRP=y
-CONFIG_AR71XX_MACH_TL_MR3420=y
+CONFIG_AR71XX_MACH_TL_MR3X20=y
CONFIG_AR71XX_MACH_TL_WA901ND=y
CONFIG_AR71XX_MACH_TL_WR1043ND=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
CONFIG_AR71XX_MACH_RB4XX=y
CONFIG_AR71XX_MACH_RB750=y
CONFIG_AR71XX_MACH_TEW_632BRP=y
-CONFIG_AR71XX_MACH_TL_MR3420=y
+CONFIG_AR71XX_MACH_TL_MR3X20=y
CONFIG_AR71XX_MACH_TL_WA901ND=y
CONFIG_AR71XX_MACH_TL_WR1043ND=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
CONFIG_AR71XX_MACH_RB4XX=y
CONFIG_AR71XX_MACH_RB750=y
CONFIG_AR71XX_MACH_TEW_632BRP=y
-CONFIG_AR71XX_MACH_TL_MR3420=y
+CONFIG_AR71XX_MACH_TL_MR3X20=y
CONFIG_AR71XX_MACH_TL_WA901ND=y
CONFIG_AR71XX_MACH_TL_WR1043ND=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
select AR71XX_DEV_LEDS_GPIO
default n
-config AR71XX_MACH_TL_MR3420
- bool "TP-LINK TL-MR3420 support"
+config AR71XX_MACH_TL_MR3X20
+ bool "TP-LINK TL-MR3220/3420 support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_AP91_PCI if PCI
select AR71XX_DEV_GPIO_BUTTONS
obj-$(CONFIG_AR71XX_MACH_RB4XX) += mach-rb4xx.o
obj-$(CONFIG_AR71XX_MACH_RB750) += mach-rb750.o
obj-$(CONFIG_AR71XX_MACH_TEW_632BRP) += mach-tew-632brp.o
-obj-$(CONFIG_AR71XX_MACH_TL_MR3420) += mach-tl-mr3420.o
+obj-$(CONFIG_AR71XX_MACH_TL_MR3X20) += mach-tl-mr3x20.o
obj-$(CONFIG_AR71XX_MACH_TL_WA901ND) += mach-tl-wa901nd.o
obj-$(CONFIG_AR71XX_MACH_TL_WR741ND) += mach-tl-wr741nd.o
obj-$(CONFIG_AR71XX_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
+++ /dev/null
-/*
- * TP-LINK TL-MR3420 board support
- *
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ar71xx/ar71xx.h>
-
-#include "machtype.h"
-#include "devices.h"
-#include "dev-m25p80.h"
-#include "dev-ap91-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-usb.h"
-
-#define TL_MR3420_GPIO_LED_QSS 0
-#define TL_MR3420_GPIO_LED_SYSTEM 1
-#define TL_MR3420_GPIO_LED_3G 8
-
-#define TL_MR3420_GPIO_BTN_RESET 11
-#define TL_MR3420_GPIO_BTN_QSS 12
-
-#define TL_MR3420_GPIO_USB_POWER 6
-
-#define TL_MR3420_BUTTONS_POLL_INTERVAL 20
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition tl_mr3420_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = 0x020000,
- .size = 0x140000,
- }, {
- .name = "rootfs",
- .offset = 0x160000,
- .size = 0x290000,
- }, {
- .name = "art",
- .offset = 0x3f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x020000,
- .size = 0x3d0000,
- }
-};
-#define tl_mr3420_num_partitions ARRAY_SIZE(tl_mr3420_partitions)
-#else
-#define tl_mr3420_partitions NULL
-#define tl_mr3420_num_partitions 0
-#endif /* CONFIG_MTD_PARTITIONS */
-
-static struct flash_platform_data tl_mr3420_flash_data = {
- .parts = tl_mr3420_partitions,
- .nr_parts = tl_mr3420_num_partitions,
-};
-
-static struct gpio_led tl_mr3420_leds_gpio[] __initdata = {
- {
- .name = "tl-mr3420:green:system",
- .gpio = TL_MR3420_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tl-mr3420:green:qss",
- .gpio = TL_MR3420_GPIO_LED_QSS,
- .active_low = 1,
- }, {
- .name = "tl-mr3420:green:3g",
- .gpio = TL_MR3420_GPIO_LED_3G,
- .active_low = 1,
- }
-};
-
-static struct gpio_button tl_mr3420_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .threshold = 3,
- .gpio = TL_MR3420_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "qss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .threshold = 3,
- .gpio = TL_MR3420_GPIO_BTN_QSS,
- .active_low = 1,
- }
-};
-
-static void __init tl_mr3420_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- /* enable power for the USB port */
- gpio_request(TL_MR3420_GPIO_USB_POWER, "USB power");
- gpio_direction_output(TL_MR3420_GPIO_USB_POWER, 1);
-
- ar71xx_add_device_m25p80(&tl_mr3420_flash_data);
-
- ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr3420_leds_gpio),
- tl_mr3420_leds_gpio);
-
- ar71xx_add_device_gpio_buttons(-1, TL_MR3420_BUTTONS_POLL_INTERVAL,
- ARRAY_SIZE(tl_mr3420_gpio_buttons),
- tl_mr3420_gpio_buttons);
-
- ar71xx_eth1_data.has_ar7240_switch = 1;
- ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
- ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
-
- /* WAN port */
- ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ar71xx_eth0_data.speed = SPEED_100;
- ar71xx_eth0_data.duplex = DUPLEX_FULL;
-
- /* LAN ports */
- ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ar71xx_eth1_data.speed = SPEED_1000;
- ar71xx_eth1_data.duplex = DUPLEX_FULL;
-
- ar71xx_add_device_mdio(0x0);
- ar71xx_add_device_eth(1);
- ar71xx_add_device_eth(0);
-
- ar71xx_add_device_usb();
-
- ap91_pci_init(ee, mac);
-}
-MIPS_MACHINE(AR71XX_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420",
- tl_mr3420_setup);
--- /dev/null
+/*
+ * TP-LINK TL-MR3220/3420 board support
+ *
+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+
+#define TL_MR3X20_GPIO_LED_QSS 0
+#define TL_MR3X20_GPIO_LED_SYSTEM 1
+#define TL_MR3X20_GPIO_LED_3G 8
+
+#define TL_MR3X20_GPIO_BTN_RESET 11
+#define TL_MR3X20_GPIO_BTN_QSS 12
+
+#define TL_MR3X20_GPIO_USB_POWER 6
+
+#define TL_MR3X20_BUTTONS_POLL_INTERVAL 20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition tl_mr3x20_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = 0x020000,
+ .size = 0x140000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x160000,
+ .size = 0x290000,
+ }, {
+ .name = "art",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x020000,
+ .size = 0x3d0000,
+ }
+};
+#define tl_mr3x20_num_partitions ARRAY_SIZE(tl_mr3x20_partitions)
+#else
+#define tl_mr3x20_partitions NULL
+#define tl_mr3x20_num_partitions 0
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data tl_mr3x20_flash_data = {
+ .parts = tl_mr3x20_partitions,
+ .nr_parts = tl_mr3x20_num_partitions,
+};
+
+static struct gpio_led tl_mr3x20_leds_gpio[] __initdata = {
+ {
+ .name = "tl-mr3x20:green:system",
+ .gpio = TL_MR3X20_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tl-mr3x20:green:qss",
+ .gpio = TL_MR3X20_GPIO_LED_QSS,
+ .active_low = 1,
+ }, {
+ .name = "tl-mr3x20:green:3g",
+ .gpio = TL_MR3X20_GPIO_LED_3G,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_button tl_mr3x20_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .threshold = 3,
+ .gpio = TL_MR3X20_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .threshold = 3,
+ .gpio = TL_MR3X20_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static void __init tl_mr3x20_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* enable power for the USB port */
+ gpio_request(TL_MR3X20_GPIO_USB_POWER, "USB power");
+ gpio_direction_output(TL_MR3X20_GPIO_USB_POWER, 1);
+
+ ar71xx_add_device_m25p80(&tl_mr3x20_flash_data);
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio),
+ tl_mr3x20_leds_gpio);
+
+ ar71xx_add_device_gpio_buttons(-1, TL_MR3X20_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_mr3x20_gpio_buttons),
+ tl_mr3x20_gpio_buttons);
+
+ ar71xx_eth1_data.has_ar7240_switch = 1;
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
+
+ /* WAN port */
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth0_data.speed = SPEED_100;
+ ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+ /* LAN ports */
+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth1_data.speed = SPEED_1000;
+ ar71xx_eth1_data.duplex = DUPLEX_FULL;
+
+ ar71xx_add_device_mdio(0x0);
+ ar71xx_add_device_eth(1);
+ ar71xx_add_device_eth(0);
+
+ ar71xx_add_device_usb();
+
+ ap91_pci_init(ee, mac);
+}
+MIPS_MACHINE(AR71XX_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420",
+ tl_mr3x20_setup);
+
+MIPS_MACHINE(AR71XX_MACH_TL_MR3220, "TL-MR3220", "TP-LINK TL-MR3220",
+ tl_mr3x20_setup);
AR71XX_MACH_MZK_W300NH, /* Planex MZK-W300NH */
AR71XX_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
AR71XX_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
+ AR71XX_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */
AR71XX_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */
AR71XX_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
AR71XX_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */
# See /LICENSE for more information.
#
+define Profile/TLMR3220V1
+ NAME:=TP-LINK TL-MR3220 v1
+ PACKAGES:=kmod-ath9k wpad-mini kmod-usb-core kmod-usb2
+endef
+
+define Profile/TLMR3220V1/Description
+ Package set optimized for the TP-LINK TL-MR3220 v1.
+endef
+
+$(eval $(call Profile,TLMR3220V1))
+
define Profile/TLMR3420V1
NAME:=TP-LINK TL-MR3420 v1
PACKAGES:=kmod-ath9k wpad-mini kmod-usb-core kmod-usb2
$(call Image/Build/Template/$(fs_64k)/$(1),ZyXEL,nbg460n_550n_550nh,board=NBG460N,NBG-460N)
endef
+define Image/Build/Profile/TLMR3220V1
+ $(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-mr3220-v1,board=TL-MR3220,TL-MR3220v1)
+endef
+
define Image/Build/Profile/TLMR3420V1
$(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-mr3420-v1,board=TL-MR3420,TL-MR3420v1)
endef
$(call Image/Build/Profile/PB92,$(1))
$(call Image/Build/Profile/TEW632BRP,$(1))
$(call Image/Build/Profile/TEW652BRP,$(1))
+ $(call Image/Build/Profile/TLMR3220V1,$(1))
$(call Image/Build/Profile/TLMR3420V1,$(1))
$(call Image/Build/Profile/TLWA901NDV1,$(1))
$(call Image/Build/Profile/TLWR741NDV1,$(1))
projects / openwrt / staging / nbd.git / commitdiff