LINUX_VERSION-3.18 = .71
LINUX_VERSION-4.4 = .112
-LINUX_VERSION-4.9 = .82
+LINUX_VERSION-4.9 = .85
LINUX_VERSION-4.14 = .23
LINUX_KERNEL_HASH-3.18.71 = 5abc9778ad44ce02ed6c8ab52ece8a21c6d20d21f6ed8a19287b4a38a50c1240
LINUX_KERNEL_HASH-4.4.112 = 544b42cbeed022896115c76a18fc97b4507d5b41d7ac0ce1dce9afd6ffd11ecd
-LINUX_KERNEL_HASH-4.9.82 = 4b710b2701daafeb8e4db4c06f0ed3e62a6d20d6213a4927769c89ae42a9b180
+LINUX_KERNEL_HASH-4.9.85 = 80fe13eee45bd0d5aee6193281dc85dad14500e27d238dc45ebcbcc77cd965c1
LINUX_KERNEL_HASH-4.14.23 = 9a97b5555a2baaed9aa7711524ae3b9179579efb902d76a814a916aefe5712ca
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -533,6 +533,12 @@ config SPI_QUP
+@@ -534,6 +534,12 @@ config SPI_QUP
This driver can also be built as a module. If so, the module
will be called spi_qup.
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -761,6 +761,13 @@ config SPI_TLE62X0
+@@ -762,6 +762,13 @@ config SPI_TLE62X0
sysfs interface, with each line presented as a kind of GPIO
exposing both switch control and diagnostic feedback.
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -768,6 +768,11 @@ config SPI_RB4XX_CPLD
+@@ -769,6 +769,11 @@ config SPI_RB4XX_CPLD
SPI driver for the Xilinx CPLD chip present on the
MikroTik RB4xx boards.
+module_exit(fsg_cleanup);
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
-@@ -762,6 +762,19 @@ config USB_HWA_HCD
+@@ -754,6 +754,19 @@ config USB_HWA_HCD
To compile this driver a module, choose M here: the module
will be called "hwa-hc".
+
config ARCH_SUNXI
bool "Allwinner sunxi 64-bit SoC Family"
- select GENERIC_IRQ_CHIP
+ select ARCH_HAS_RESET_CONTROLLER
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,6 +1,7 @@
--- a/Makefile
+++ b/Makefile
-@@ -409,8 +409,8 @@ KERNELRELEASE = $(shell cat include/conf
+@@ -411,8 +411,8 @@ KERNELRELEASE = $(shell cat include/conf
KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
return received;
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
-@@ -3186,7 +3186,7 @@ static int gfar_poll_rx_sq(struct napi_s
+@@ -3193,7 +3193,7 @@ static int gfar_poll_rx_sq(struct napi_s
if (work_done < budget) {
u32 imask;
/* Clear the halt bit in RSTAT */
gfar_write(®s->rstat, gfargrp->rstat);
-@@ -3275,7 +3275,7 @@ static int gfar_poll_rx(struct napi_stru
+@@ -3282,7 +3282,7 @@ static int gfar_poll_rx(struct napi_stru
if (!num_act_queues) {
u32 imask;
--- a/Makefile
+++ b/Makefile
-@@ -401,7 +401,7 @@ KBUILD_AFLAGS_KERNEL :=
+@@ -403,7 +403,7 @@ KBUILD_AFLAGS_KERNEL :=
KBUILD_CFLAGS_KERNEL :=
KBUILD_AFLAGS_MODULE := -DMODULE
KBUILD_CFLAGS_MODULE := -DMODULE
--- a/Makefile
+++ b/Makefile
-@@ -1200,7 +1200,6 @@ all: modules
+@@ -1202,7 +1202,6 @@ all: modules
PHONY += modules
modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
@$(kecho) ' Building modules, stage 2.';
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
-@@ -1230,7 +1229,6 @@ _modinst_:
+@@ -1232,7 +1231,6 @@ _modinst_:
rm -f $(MODLIB)/build ; \
ln -s $(CURDIR) $(MODLIB)/build ; \
fi
--- a/Makefile
+++ b/Makefile
-@@ -404,6 +404,11 @@ KBUILD_CFLAGS_MODULE := -DMODULE
+@@ -406,6 +406,11 @@ KBUILD_CFLAGS_MODULE := -DMODULE
KBUILD_LDFLAGS_MODULE = -T $(srctree)/scripts/module-common.lds $(if $(CONFIG_PROFILING),,-s)
GCC_PLUGINS_CFLAGS :=
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
-@@ -634,11 +639,6 @@ KBUILD_CFLAGS += $(call cc-disable-warni
+@@ -636,11 +641,6 @@ KBUILD_CFLAGS += $(call cc-disable-warni
KBUILD_CFLAGS += $(call cc-disable-warning, format-overflow)
KBUILD_CFLAGS += $(call cc-disable-warning, int-in-bool-context)
--- a/Makefile
+++ b/Makefile
-@@ -640,12 +640,12 @@ KBUILD_CFLAGS += $(call cc-option,-fdata
+@@ -642,12 +642,12 @@ KBUILD_CFLAGS += $(call cc-option,-fdata
endif
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
drivers/pci/host/pcie-designware.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
-index bf558df5b7b3..2b5470173196 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -861,7 +861,7 @@ void dw_pcie_setup_rc(struct pcie_port *
{
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
-@@ -397,6 +397,11 @@ config MAGIC_SYSRQ_DEFAULT_ENABLE
+@@ -396,6 +396,11 @@ config MAGIC_SYSRQ_DEFAULT_ENABLE
This may be set to 1 or 0 to enable or disable them all, or
to a bitmask as described in Documentation/sysrq.txt.
};
static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count)
-@@ -100,6 +103,20 @@ static int dwc3_of_simple_probe(struct p
+@@ -102,6 +105,20 @@ static int dwc3_of_simple_probe(struct p
if (ret)
return ret;
ret = of_platform_populate(np, NULL, NULL, dev);
if (ret) {
for (i = 0; i < simple->num_clocks; i++) {
-@@ -128,6 +145,12 @@ static int dwc3_of_simple_remove(struct
+@@ -130,6 +147,12 @@ static int dwc3_of_simple_remove(struct
clk_put(simple->clks[i]);
}
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
-@@ -194,6 +194,17 @@ config USB_MXS_PHY
+@@ -195,6 +195,17 @@ config USB_MXS_PHY
MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
-@@ -197,6 +197,7 @@ static const struct dev_pm_ops dwc3_of_s
+@@ -199,6 +199,7 @@ static const struct dev_pm_ops dwc3_of_s
static const struct of_device_id of_dwc3_simple_match[] = {
{ .compatible = "qcom,dwc3" },
+};
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -403,6 +403,14 @@ config SPI_NUC900
+@@ -404,6 +404,14 @@ config SPI_NUC900
help
SPI driver for Nuvoton NUC900 series ARM SoCs
}
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
-@@ -4642,3 +4642,11 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IN
+@@ -4649,3 +4649,11 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IN
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2031, quirk_no_aersid);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2032, quirk_no_aersid);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2033, quirk_no_aersid);
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
-@@ -2930,6 +2930,7 @@ static irqreturn_t dwc3_interrupt(int ir
+@@ -2932,6 +2932,7 @@ static irqreturn_t dwc3_interrupt(int ir
int dwc3_gadget_init(struct dwc3 *dwc)
{
int ret, irq;
struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
irq = platform_get_irq_byname(dwc3_pdev, "peripheral");
-@@ -3044,6 +3045,12 @@ int dwc3_gadget_init(struct dwc3 *dwc)
+@@ -3046,6 +3047,12 @@ int dwc3_gadget_init(struct dwc3 *dwc)
goto err5;
}
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -533,6 +533,12 @@ config SPI_QUP
+@@ -534,6 +534,12 @@ config SPI_QUP
This driver can also be built as a module. If so, the module
will be called spi_qup.
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -539,6 +539,12 @@ config SPI_RT2880
+@@ -540,6 +540,12 @@ config SPI_RT2880
help
This selects a driver for the Ralink RT288x/RT305x SPI Controller.
+++ /dev/null
-From 900a9020af7a023f9b64c919fddf8a7486108962 Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Tue, 18 Apr 2017 15:55:51 +0200
-Subject: arm64: sunxi: always enable reset controller
-
-The sunxi clk driver causes a link error when the reset controller
-subsystem is disabled:
-
-drivers/clk/built-in.o: In function `sun4i_ve_clk_setup':
-:(.init.text+0xd040): undefined reference to `reset_controller_register'
-drivers/clk/built-in.o: In function `sun4i_a10_display_init':
-:(.init.text+0xe5e0): undefined reference to `reset_controller_register'
-drivers/clk/built-in.o: In function `sunxi_usb_clk_setup':
-:(.init.text+0x10074): undefined reference to `reset_controller_register'
-
-We already force it to be enabled on arm32 and some other arm64 platforms,
-but not on arm64/sunxi. This adds the respective Kconfig statements to
-also select it here.
-
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm64/Kconfig.platforms | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/Kconfig.platforms
-+++ b/arch/arm64/Kconfig.platforms
-@@ -2,9 +2,11 @@ menu "Platform selection"
-
- config ARCH_SUNXI
- bool "Allwinner sunxi 64-bit SoC Family"
-+ select ARCH_HAS_RESET_CONTROLLER
- select GENERIC_IRQ_CHIP
- select PINCTRL
- select PINCTRL_SUN50I_A64
-+ select RESET_CONTROLLER
- help
- This enables support for Allwinner sunxi based SoCs like the A64.
-
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
-@@ -35,17 +35,14 @@ config SUNXI_CCU_NK
+@@ -36,17 +36,14 @@ config SUNXI_CCU_NK
config SUNXI_CCU_NKM
bool
- clocks: phandle to the oscillators feeding the CCU. Two are needed:
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
-@@ -53,6 +53,17 @@ config SUNXI_CCU_MP
+@@ -54,6 +54,17 @@ config SUNXI_CCU_MP
# SoC Drivers