The pasemi MSI code is currently always built when MPIC=y && PCI_MSI=y.
It should not have any effect on other platforms, because it immediately
checks the MPIC's compatible property for "pasemi,pwrficient-openpic".
However it's odd that it's still built even when PASEMI=n. It also
needn't be in sysdev, as it's only used by pasemi. So move it into
platforms/pasemi, whereby it will only be built for PASEMI=y.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o dma_lib.o misc.o
obj-$(CONFIG_PPC_PASEMI_MDIO) += gpio_mdio.o
+obj-$(CONFIG_PCI_MSI) += msi.o
--- /dev/null
+/*
+ * Copyright 2007, Olof Johansson, PA Semi
+ *
+ * Based on arch/powerpc/sysdev/mpic_u3msi.c:
+ *
+ * Copyright 2006, Segher Boessenkool, IBM Corporation.
+ * Copyright 2006-2007, Michael Ellerman, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#include <linux/irq.h>
+#include <linux/msi.h>
+#include <asm/mpic.h>
+#include <asm/prom.h>
+#include <asm/hw_irq.h>
+#include <asm/ppc-pci.h>
+#include <asm/msi_bitmap.h>
+
+#include <sysdev/mpic.h>
+
+/* Allocate 16 interrupts per device, to give an alignment of 16,
+ * since that's the size of the grouping w.r.t. affinity. If someone
+ * needs more than 32 MSI's down the road we'll have to rethink this,
+ * but it should be OK for now.
+ */
+#define ALLOC_CHUNK 16
+
+#define PASEMI_MSI_ADDR 0xfc080000
+
+/* A bit ugly, can we get this from the pci_dev somehow? */
+static struct mpic *msi_mpic;
+
+
+static void mpic_pasemi_msi_mask_irq(struct irq_data *data)
+{
+ pr_debug("mpic_pasemi_msi_mask_irq %d\n", data->irq);
+ pci_msi_mask_irq(data);
+ mpic_mask_irq(data);
+}
+
+static void mpic_pasemi_msi_unmask_irq(struct irq_data *data)
+{
+ pr_debug("mpic_pasemi_msi_unmask_irq %d\n", data->irq);
+ mpic_unmask_irq(data);
+ pci_msi_unmask_irq(data);
+}
+
+static struct irq_chip mpic_pasemi_msi_chip = {
+ .irq_shutdown = mpic_pasemi_msi_mask_irq,
+ .irq_mask = mpic_pasemi_msi_mask_irq,
+ .irq_unmask = mpic_pasemi_msi_unmask_irq,
+ .irq_eoi = mpic_end_irq,
+ .irq_set_type = mpic_set_irq_type,
+ .irq_set_affinity = mpic_set_affinity,
+ .name = "PASEMI-MSI",
+};
+
+static void pasemi_msi_teardown_msi_irqs(struct pci_dev *pdev)
+{
+ struct msi_desc *entry;
+
+ pr_debug("pasemi_msi_teardown_msi_irqs, pdev %p\n", pdev);
+
+ list_for_each_entry(entry, &pdev->msi_list, list) {
+ if (entry->irq == NO_IRQ)
+ continue;
+
+ irq_set_msi_desc(entry->irq, NULL);
+ msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap,
+ virq_to_hw(entry->irq), ALLOC_CHUNK);
+ irq_dispose_mapping(entry->irq);
+ }
+
+ return;
+}
+
+static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+{
+ unsigned int virq;
+ struct msi_desc *entry;
+ struct msi_msg msg;
+ int hwirq;
+
+ if (type == PCI_CAP_ID_MSIX)
+ pr_debug("pasemi_msi: MSI-X untested, trying anyway\n");
+ pr_debug("pasemi_msi_setup_msi_irqs, pdev %p nvec %d type %d\n",
+ pdev, nvec, type);
+
+ msg.address_hi = 0;
+ msg.address_lo = PASEMI_MSI_ADDR;
+
+ list_for_each_entry(entry, &pdev->msi_list, list) {
+ /* Allocate 16 interrupts for now, since that's the grouping for
+ * affinity. This can be changed later if it turns out 32 is too
+ * few MSIs for someone, but restrictions will apply to how the
+ * sources can be changed independently.
+ */
+ hwirq = msi_bitmap_alloc_hwirqs(&msi_mpic->msi_bitmap,
+ ALLOC_CHUNK);
+ if (hwirq < 0) {
+ pr_debug("pasemi_msi: failed allocating hwirq\n");
+ return hwirq;
+ }
+
+ virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
+ if (virq == NO_IRQ) {
+ pr_debug("pasemi_msi: failed mapping hwirq 0x%x\n",
+ hwirq);
+ msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq,
+ ALLOC_CHUNK);
+ return -ENOSPC;
+ }
+
+ /* Vector on MSI is really an offset, the hardware adds
+ * it to the value written at the magic address. So set
+ * it to 0 to remain sane.
+ */
+ mpic_set_vector(virq, 0);
+
+ irq_set_msi_desc(virq, entry);
+ irq_set_chip(virq, &mpic_pasemi_msi_chip);
+ irq_set_irq_type(virq, IRQ_TYPE_EDGE_RISING);
+
+ pr_debug("pasemi_msi: allocated virq 0x%x (hw 0x%x) " \
+ "addr 0x%x\n", virq, hwirq, msg.address_lo);
+
+ /* Likewise, the device writes [0...511] into the target
+ * register to generate MSI [512...1023]
+ */
+ msg.data = hwirq-0x200;
+ pci_write_msi_msg(virq, &msg);
+ }
+
+ return 0;
+}
+
+int mpic_pasemi_msi_init(struct mpic *mpic)
+{
+ int rc;
+
+ if (!mpic->irqhost->of_node ||
+ !of_device_is_compatible(mpic->irqhost->of_node,
+ "pasemi,pwrficient-openpic"))
+ return -ENODEV;
+
+ rc = mpic_msi_init_allocator(mpic);
+ if (rc) {
+ pr_debug("pasemi_msi: Error allocating bitmap!\n");
+ return rc;
+ }
+
+ pr_debug("pasemi_msi: Registering PA Semi MPIC MSI callbacks\n");
+
+ msi_mpic = mpic;
+ WARN_ON(ppc_md.setup_msi_irqs);
+ ppc_md.setup_msi_irqs = pasemi_msi_setup_msi_irqs;
+ ppc_md.teardown_msi_irqs = pasemi_msi_teardown_msi_irqs;
+
+ return 0;
+}
ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC)
-mpic-msi-obj-$(CONFIG_PCI_MSI) += mpic_msi.o mpic_u3msi.o mpic_pasemi_msi.o
+mpic-msi-obj-$(CONFIG_PCI_MSI) += mpic_msi.o mpic_u3msi.o
obj-$(CONFIG_MPIC) += mpic.o $(mpic-msi-obj-y)
obj-$(CONFIG_MPIC_TIMER) += mpic_timer.o
obj-$(CONFIG_FSL_MPIC_TIMER_WAKEUP) += fsl_mpic_timer_wakeup.o
extern void mpic_msi_reserve_hwirq(struct mpic *mpic, irq_hw_number_t hwirq);
extern int mpic_msi_init_allocator(struct mpic *mpic);
extern int mpic_u3msi_init(struct mpic *mpic);
-extern int mpic_pasemi_msi_init(struct mpic *mpic);
#else
static inline void mpic_msi_reserve_hwirq(struct mpic *mpic,
irq_hw_number_t hwirq)
{
return -1;
}
+#endif
-static inline int mpic_pasemi_msi_init(struct mpic *mpic)
-{
- return -1;
-}
+#if defined(CONFIG_PCI_MSI) && defined(CONFIG_PPC_PASEMI)
+int mpic_pasemi_msi_init(struct mpic *mpic);
+#else
+static inline int mpic_pasemi_msi_init(struct mpic *mpic) { return -1; }
#endif
extern int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type);
+++ /dev/null
-/*
- * Copyright 2007, Olof Johansson, PA Semi
- *
- * Based on arch/powerpc/sysdev/mpic_u3msi.c:
- *
- * Copyright 2006, Segher Boessenkool, IBM Corporation.
- * Copyright 2006-2007, Michael Ellerman, IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2 of the
- * License.
- *
- */
-
-#undef DEBUG
-
-#include <linux/irq.h>
-#include <linux/msi.h>
-#include <asm/mpic.h>
-#include <asm/prom.h>
-#include <asm/hw_irq.h>
-#include <asm/ppc-pci.h>
-#include <asm/msi_bitmap.h>
-
-#include "mpic.h"
-
-/* Allocate 16 interrupts per device, to give an alignment of 16,
- * since that's the size of the grouping w.r.t. affinity. If someone
- * needs more than 32 MSI's down the road we'll have to rethink this,
- * but it should be OK for now.
- */
-#define ALLOC_CHUNK 16
-
-#define PASEMI_MSI_ADDR 0xfc080000
-
-/* A bit ugly, can we get this from the pci_dev somehow? */
-static struct mpic *msi_mpic;
-
-
-static void mpic_pasemi_msi_mask_irq(struct irq_data *data)
-{
- pr_debug("mpic_pasemi_msi_mask_irq %d\n", data->irq);
- pci_msi_mask_irq(data);
- mpic_mask_irq(data);
-}
-
-static void mpic_pasemi_msi_unmask_irq(struct irq_data *data)
-{
- pr_debug("mpic_pasemi_msi_unmask_irq %d\n", data->irq);
- mpic_unmask_irq(data);
- pci_msi_unmask_irq(data);
-}
-
-static struct irq_chip mpic_pasemi_msi_chip = {
- .irq_shutdown = mpic_pasemi_msi_mask_irq,
- .irq_mask = mpic_pasemi_msi_mask_irq,
- .irq_unmask = mpic_pasemi_msi_unmask_irq,
- .irq_eoi = mpic_end_irq,
- .irq_set_type = mpic_set_irq_type,
- .irq_set_affinity = mpic_set_affinity,
- .name = "PASEMI-MSI",
-};
-
-static void pasemi_msi_teardown_msi_irqs(struct pci_dev *pdev)
-{
- struct msi_desc *entry;
-
- pr_debug("pasemi_msi_teardown_msi_irqs, pdev %p\n", pdev);
-
- list_for_each_entry(entry, &pdev->msi_list, list) {
- if (entry->irq == NO_IRQ)
- continue;
-
- irq_set_msi_desc(entry->irq, NULL);
- msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap,
- virq_to_hw(entry->irq), ALLOC_CHUNK);
- irq_dispose_mapping(entry->irq);
- }
-
- return;
-}
-
-static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
-{
- unsigned int virq;
- struct msi_desc *entry;
- struct msi_msg msg;
- int hwirq;
-
- if (type == PCI_CAP_ID_MSIX)
- pr_debug("pasemi_msi: MSI-X untested, trying anyway\n");
- pr_debug("pasemi_msi_setup_msi_irqs, pdev %p nvec %d type %d\n",
- pdev, nvec, type);
-
- msg.address_hi = 0;
- msg.address_lo = PASEMI_MSI_ADDR;
-
- list_for_each_entry(entry, &pdev->msi_list, list) {
- /* Allocate 16 interrupts for now, since that's the grouping for
- * affinity. This can be changed later if it turns out 32 is too
- * few MSIs for someone, but restrictions will apply to how the
- * sources can be changed independently.
- */
- hwirq = msi_bitmap_alloc_hwirqs(&msi_mpic->msi_bitmap,
- ALLOC_CHUNK);
- if (hwirq < 0) {
- pr_debug("pasemi_msi: failed allocating hwirq\n");
- return hwirq;
- }
-
- virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
- if (virq == NO_IRQ) {
- pr_debug("pasemi_msi: failed mapping hwirq 0x%x\n",
- hwirq);
- msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq,
- ALLOC_CHUNK);
- return -ENOSPC;
- }
-
- /* Vector on MSI is really an offset, the hardware adds
- * it to the value written at the magic address. So set
- * it to 0 to remain sane.
- */
- mpic_set_vector(virq, 0);
-
- irq_set_msi_desc(virq, entry);
- irq_set_chip(virq, &mpic_pasemi_msi_chip);
- irq_set_irq_type(virq, IRQ_TYPE_EDGE_RISING);
-
- pr_debug("pasemi_msi: allocated virq 0x%x (hw 0x%x) " \
- "addr 0x%x\n", virq, hwirq, msg.address_lo);
-
- /* Likewise, the device writes [0...511] into the target
- * register to generate MSI [512...1023]
- */
- msg.data = hwirq-0x200;
- pci_write_msi_msg(virq, &msg);
- }
-
- return 0;
-}
-
-int mpic_pasemi_msi_init(struct mpic *mpic)
-{
- int rc;
-
- if (!mpic->irqhost->of_node ||
- !of_device_is_compatible(mpic->irqhost->of_node,
- "pasemi,pwrficient-openpic"))
- return -ENODEV;
-
- rc = mpic_msi_init_allocator(mpic);
- if (rc) {
- pr_debug("pasemi_msi: Error allocating bitmap!\n");
- return rc;
- }
-
- pr_debug("pasemi_msi: Registering PA Semi MPIC MSI callbacks\n");
-
- msi_mpic = mpic;
- WARN_ON(ppc_md.setup_msi_irqs);
- ppc_md.setup_msi_irqs = pasemi_msi_setup_msi_irqs;
- ppc_md.teardown_msi_irqs = pasemi_msi_teardown_msi_irqs;
-
- return 0;
-}
projects / openwrt / staging / blogic.git / commitdiff