davinci: da850: move da850_evm specific mmcsd pinmux array to board file.

The da850_mmcsd0_pins pinmux array contains pins that are specific to the
da850 evm board (the write protect and card detect GPIO pins).  Move
the array to the board file.

Signed-off-by: Michael Williamson <michael.williamson@criticallink.com>
Tested-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index c4c0b7562d9687471f5d34951de42a37178654b7..11f986bec89d412eb986d5e5a1a58847758da3a3 100644 (file)
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -690,6 +690,13 @@ static struct davinci_mmc_config da850_mmc_config = {
        .version        = MMC_CTLR_VERSION_2,
 };
 
+static const short da850_evm_mmcsd0_pins[] __initconst = {
+       DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
+       DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
+       DA850_GPIO4_0, DA850_GPIO4_1,
+       -1
+};
+
 static void da850_panel_power_ctrl(int val)
 {
        /* lcd backlight */
@@ -1077,7 +1084,7 @@ static __init void da850_evm_init(void)
                                ret);
 
        if (HAS_MMC) {
-               ret = davinci_cfg_reg_list(da850_mmcsd0_pins);
+               ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins);
                if (ret)
                        pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
                                        " %d\n", ret);

diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 9cb769c2890b17156ffcb1dcc4d3f9b8f1c0da27..9fd497afd4a538e663bcbaa93b4c6850d52c5404 100644 (file)
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -606,13 +606,6 @@ const short da850_lcdcntl_pins[] __initdata = {
        -1
 };
 
-const short da850_mmcsd0_pins[] __initdata = {
-       DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
-       DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
-       DA850_GPIO4_0, DA850_GPIO4_1,
-       -1
-};
-
 /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
 static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
        [IRQ_DA8XX_COMMTX]              = 7,

diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 89668b402e23b84c357a75f259d90d0192e31845..18f6c23f6b0118f274cc04ac1b9d5fbd06736564 100644 (file)
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -129,6 +129,5 @@ extern const short da850_uart2_pins[];
 extern const short da850_i2c0_pins[];
 extern const short da850_i2c1_pins[];
 extern const short da850_lcdcntl_pins[];
-extern const short da850_mmcsd0_pins[];
 
 #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */