--- /dev/null
+/*
+ * Copyright (C) 2004 Manuel Novoa III <mjn3@codepoet.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* July 29, 2004
+ *
+ * This is a hacked replacement for the 'addpattern' utility used to
+ * create wrt54g .bin firmware files. It isn't pretty, but it does
+ * the job for me.
+ *
+ * Extensions:
+ * -v allows setting the version string on the command line.
+ * -{0|1} sets the (currently ignored) hw_ver flag in the header
+ * to 0 or 1 respectively.
+ */
+
+/* January 12, 2005
+ *
+ * Modified by rodent at rodent dot za dot net
+ * Support added for the new WRT54G v2.2 and WRT54GS v1.1 "flags"
+ * Without the flags set to 0x7, the above units will refuse to flash.
+ *
+ * Extensions:
+ * -{0|1|2} sets {0|1} sets hw_ver flag to 0/1. {2} sets hw_ver to 1
+ * and adds the new hardware "flags" for the v2.2/v1.1 units
+*/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <unistd.h>
+#include <sys/stat.h>
+
+/**********************************************************************/
+
+#define CODE_ID "U2ND" /* from code_pattern.h */
+#define CODE_PATTERN "W54S" /* from code_pattern.h */
+
+#define CYBERTAN_VERSION "v3.37.2" /* from cyutils.h */
+
+/* WRT54G v2.2 and WRT54GS v1.1 "flags" (from 3.37.32 firmware cyutils.h) */
+#define SUPPORT_4712_CHIP 0x0001
+#define SUPPORT_INTEL_FLASH 0x0002
+#define SUPPORT_5325E_SWITCH 0x0004
+
+struct code_header { /* from cyutils.h */
+ char magic[4];
+ char res1[4]; /* for extra magic */
+ char fwdate[3];
+ char fwvern[3];
+ char id[4]; /* U2ND */
+ char hw_ver; /* 0: for 4702, 1: for 4712 -- new in 2.04.3 */
+ unsigned short flags; /* SUPPORT_ flags new for 3.37.2 (WRT54G v2.2 and WRT54GS v1.1) */
+ unsigned char res2[10];
+} ;
+
+/**********************************************************************/
+
+void usage(void) __attribute__ (( __noreturn__ ));
+
+void usage(void)
+{
+ fprintf(stderr, "Usage: addpattern [-i trxfile] [-o binfile] [-p pattern] [-g] [-v v#.#.#] [-{0|1|2}]\n");
+ exit(EXIT_FAILURE);
+}
+
+int main(int argc, char **argv)
+{
+ char buf[1024]; /* keep this at 1k or adjust garbage calc below */
+ struct code_header *hdr;
+ FILE *in = stdin;
+ FILE *out = stdout;
+ char *ifn = NULL;
+ char *ofn = NULL;
+ char *pattern = CODE_PATTERN;
+ char *version = CYBERTAN_VERSION;
+ int gflag = 0;
+ int c;
+ int v0, v1, v2;
+ size_t off, n;
+ time_t t;
+ struct tm *ptm;
+
+ fprintf(stderr, "mjn3's addpattern replacement - v0.81\n");
+
+ hdr = (struct code_header *) buf;
+ memset(hdr, 0, sizeof(struct code_header));
+
+ while ((c = getopt(argc, argv, "i:o:p:gv:012")) != -1) {
+ switch (c) {
+ case 'i':
+ ifn = optarg;
+ break;
+ case 'o':
+ ofn = optarg;
+ break;
+ case 'p':
+ pattern = optarg;
+ break;
+ case 'g':
+ gflag = 1;
+ break;
+ case 'v': /* extension to allow setting version */
+ version = optarg;
+ break;
+ case '0':
+ hdr->hw_ver = 0;
+ break;
+ case '1':
+ hdr->hw_ver = 1;
+ break;
+ case '2': /* new 54G v2.2 and 54GS v1.1 flags */
+ hdr->hw_ver = 1;
+ hdr->flags |= SUPPORT_4712_CHIP;
+ hdr->flags |= SUPPORT_INTEL_FLASH;
+ hdr->flags |= SUPPORT_5325E_SWITCH;
+ break;
+
+ default:
+ usage();
+ }
+ }
+
+ if (optind != argc) {
+ fprintf(stderr, "illegal arg \"%s\"\n", argv[optind]);
+ usage();
+ }
+
+ if (strlen(pattern) != 4) {
+ fprintf(stderr, "illegal pattern \"%s\": length != 4\n", pattern);
+ usage();
+ }
+
+ if (ifn && !(in = fopen(ifn, "r"))) {
+ fprintf(stderr, "can not open \"%s\" for reading\n", ifn);
+ usage();
+ }
+
+ if (ofn && !(out = fopen(ofn, "w"))) {
+ fprintf(stderr, "can not open \"%s\" for writing\n", ofn);
+ usage();
+ }
+
+ if (time(&t) == (time_t)(-1)) {
+ fprintf(stderr, "time call failed\n");
+ return EXIT_FAILURE;
+ }
+
+ ptm = localtime(&t);
+
+ if (3 != sscanf(version, "v%d.%d.%d", &v0, &v1, &v2)) {
+ fprintf(stderr, "bad version string \"%s\"\n", version);
+ return EXIT_FAILURE;
+ }
+
+ memcpy(&hdr->magic, pattern, 4);
+ hdr->fwdate[0] = ptm->tm_year % 100;
+ hdr->fwdate[1] = ptm->tm_mon + 1;
+ hdr->fwdate[2] = ptm->tm_mday;
+ hdr->fwvern[0] = v0;
+ hdr->fwvern[1] = v1;
+ hdr->fwvern[2] = v2;
+ memcpy(&hdr->id, CODE_ID, strlen(CODE_ID));
+
+ off = sizeof(struct code_header);
+
+ fprintf(stderr, "writing firmware v%d.%d.%d on %d/%d/%d (y/m/d)\n",
+ v0, v1, v2,
+ hdr->fwdate[0], hdr->fwdate[1], hdr->fwdate[2]);
+
+
+ while ((n = fread(buf + off, 1, sizeof(buf)-off, in) + off) > 0) {
+ off = 0;
+ if (n < sizeof(buf)) {
+ if (ferror(in)) {
+ FREAD_ERROR:
+ fprintf(stderr, "fread error\n");
+ return EXIT_FAILURE;
+ }
+ if (gflag) {
+ gflag = sizeof(buf) - n;
+ memset(buf + n, 0xff, gflag);
+ fprintf(stderr, "adding %d bytes of garbage\n", gflag);
+ n = sizeof(buf);
+ }
+ }
+ if (!fwrite(buf, n, 1, out)) {
+ FWRITE_ERROR:
+ fprintf(stderr, "fwrite error\n");
+ return EXIT_FAILURE;
+ }
+ }
+
+ if (ferror(in)) {
+ goto FREAD_ERROR;
+ }
+
+ if (fflush(out)) {
+ goto FWRITE_ERROR;
+ }
+
+ fclose(in);
+ fclose(out);
+
+ return EXIT_SUCCESS;
+}
#############################################################
#
-# openwrt tools
+# linksys and openwrt tools
#
#############################################################
-OPENWRT_SITE=http://openwrt.openbsd-geek.de
+LINKSYS_KERNEL_INCLUDE=$(BUILD_DIR)/linksys-kernel
-# shared library
-OPENWRT_SHARED_SOURCE=openwrt-shared.tar.gz
-OPENWRT_SHARED_DIR=$(BUILD_DIR)/openwrt-shared
-OPENWRT_SHARED_TARGET_BINARY:=usr/lib/libshared.so
+# shared library stuff extracted from linksys firmware GPL sourcetree
+# WRT54GS_3_37_2_1109_US
+LINKSYS_SHARED_TGZ=linksys-shared.tar.gz
+LINKSYS_SHARED_DIR=$(BUILD_DIR)/linksys-shared
+LINKSYS_SHARED_TARGET_BINARY:=usr/lib/libshared.so
-$(DL_DIR)/$(OPENWRT_SHARED_SOURCE):
- $(WGET) -P $(DL_DIR) $(OPENWRT_SITE)/$(OPENWRT_SHARED_SOURCE)
+$(DL_DIR)/$(LINKSYS_SHARED_TGZ):
+ $(WGET) -P $(DL_DIR) $(LINKSYS_TGZ_SITE)/$(LINKSYS_SHARED_TGZ)
-$(OPENWRT_SHARED_DIR)/.source: $(DL_DIR)/$(OPENWRT_SHARED_SOURCE)
- zcat $(DL_DIR)/$(OPENWRT_SHARED_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- touch $(OPENWRT_SHARED_DIR)/.source
+$(LINKSYS_SHARED_DIR)/.source: $(DL_DIR)/$(LINKSYS_SHARED_TGZ)
+ zcat $(DL_DIR)/$(LINKSYS_SHARED_TGZ) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
+ touch $(LINKSYS_SHARED_DIR)/.source
-$(TARGET_DIR)/$(OPENWRT_SHARED_TARGET_BINARY): $(OPENWRT_SHARED_DIR)/.source
- $(MAKE) -C $(OPENWRT_SHARED_DIR) -f Makefile-openwrt \
+$(TARGET_DIR)/$(LINKSYS_SHARED_TARGET_BINARY): $(LINKSYS_SHARED_DIR)/.source
+ $(SED) 's/#include.*/#include <cy_conf.h>/g;' $(LINKSYS_SHARED_DIR)/utils.h
+ $(MAKE) -C $(LINKSYS_SHARED_DIR) -f Makefile-openwrt \
INSTALLDIR=$(TARGET_DIR) \
CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
- CFLAGS="$(TARGET_CFLAGS) -I. -I../binary/include -Wall -I$(OPENWRT_SRCBASE)/" \
+ CFLAGS="$(TARGET_CFLAGS) -I$(LINKSYS_KERNEL_INCLUDE)/include \
+ -I$(LINKSYS_KERNEL_INCLUDE) -Wall -I." \
install
-openwrt-shared: $(TARGET_DIR)/$(OPENWRT_SHARED_TARGET_BINARY)
+linksys-shared: $(TARGET_DIR)/$(LINKSYS_SHARED_TARGET_BINARY)
-openwrt-shared-clean:
- -$(MAKE) -C $(OPENWRT_SHARED_DIR) clean
+linksys-shared-clean:
+ -$(MAKE) -C $(LINKSYS_SHARED_DIR) clean
-# nvram tool
-OPENWRT_NVRAM_SOURCE=openwrt-nvram.tar.gz
-OPENWRT_NVRAM_DIR=$(BUILD_DIR)/openwrt-nvram
-OPENWRT_NVRAM_TARGET_BINARY:=usr/sbin/nvram
+# nvram tool extracted from linksys firmware GPL sourcetree
+# WRT54GS_3_37_2_1109_US
+LINKSYS_NVRAM_TGZ=linksys-nvram.tar.gz
+LINKSYS_NVRAM_DIR=$(BUILD_DIR)/linksys-nvram
+LINKSYS_NVRAM_TARGET_BINARY:=usr/sbin/nvram
-$(DL_DIR)/$(OPENWRT_NVRAM_SOURCE):
- $(WGET) -P $(DL_DIR) $(OPENWRT_SITE)/$(OPENWRT_NVRAM_SOURCE)
+$(DL_DIR)/$(LINKSYS_NVRAM_TGZ):
+ $(WGET) -P $(DL_DIR) $(LINKSYS_TGZ_SITE)/$(LINKSYS_NVRAM_TGZ)
-$(OPENWRT_NVRAM_DIR)/.source: $(DL_DIR)/$(OPENWRT_NVRAM_SOURCE)
- zcat $(DL_DIR)/$(OPENWRT_NVRAM_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- touch $(OPENWRT_NVRAM_DIR)/.source
+$(LINKSYS_NVRAM_DIR)/.source: $(DL_DIR)/$(LINKSYS_NVRAM_TGZ)
+ zcat $(DL_DIR)/$(LINKSYS_NVRAM_TGZ) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
+ touch $(LINKSYS_NVRAM_DIR)/.source
-$(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY): $(OPENWRT_NVRAM_DIR)/.source
- $(MAKE) -C $(OPENWRT_NVRAM_DIR) INSTALLDIR=$(TARGET_DIR) \
+$(TARGET_DIR)/$(LINKSYS_NVRAM_TARGET_BINARY): $(LINKSYS_NVRAM_DIR)/.source
+ $(MAKE) -C $(LINKSYS_NVRAM_DIR) INSTALLDIR=$(TARGET_DIR) \
CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
- CFLAGS="$(TARGET_CFLAGS) -I. -I../binary/include -Wall -DOPENWRT_NVRAM" \
+ CFLAGS="$(TARGET_CFLAGS) -I. -I$(LINKSYS_KERNEL_INCLUDE)/include \
+ -I$(LINKSYS_KERNEL_INCLUDE) -I$(LINKSYS_SHARED_DIR) -Wall" install
+
+linksys-nvram: $(TARGET_DIR)/$(LINKSYS_NVRAM_TARGET_BINARY)
+
+linksys-nvram-clean:
+ -$(MAKE) -C $(LINKSYS_NVRAM_BUILD_DIR) clean
+
+# wlconf tool extracted from linksys firmware GPL sourcetree
+# WRT54GS_3_37_2_1109_US
+LINKSYS_WLCONF_TGZ=linksys-wlconf.tar.gz
+LINKSYS_WLCONF_DIR=$(BUILD_DIR)/linksys-wlconf
+LINKSYS_WLCONF_TARGET_BINARY:=usr/sbin/wlconf
+
+$(DL_DIR)/$(LINKSYS_WLCONF_TGZ):
+ $(WGET) -P $(DL_DIR) $(LINKSYS_TGZ_SITE)/$(LINKSYS_WLCONF_TGZ)
+
+$(LINKSYS_WLCONF_DIR)/.source: $(DL_DIR)/$(LINKSYS_WLCONF_TGZ)
+ zcat $(DL_DIR)/$(LINKSYS_WLCONF_TGZ) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
+ touch $(LINKSYS_WLCONF_DIR)/.source
+
+$(TARGET_DIR)/$(LINKSYS_WLCONF_TARGET_BINARY): $(LINKSYS_WLCONF_DIR)/.source
+ $(MAKE) -C $(LINKSYS_WLCONF_DIR) INSTALLDIR=$(TARGET_DIR) \
+ CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
+ CFLAGS="$(TARGET_CFLAGS) -I. -I$(LINKSYS_KERNEL_INCLUDE)/include \
+ -I$(LINKSYS_KERNEL_INCLUDE) \
+ -I$(LINKSYS_SHARED_DIR) \
+ -I$(LINKSYS_NVRAM_DIR) \
+ -Wall -DOPENWRT_WLCONF" \
+ LDFLAGS="-lnvram -lshared -L$(BUILD_DIR)/linksys-shared -L$(BUILD_DIR)/linksys-nvram" \
install
-openwrt-nvram: $(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY)
+linksys-wlconf: $(TARGET_DIR)/$(LINKSYS_WLCONF_TARGET_BINARY)
+
+linksys-wlconf-clean:
+ -$(MAKE) -C $(LINKSYS_WLCONF_BUILD_DIR) clean
-openwrt-nvram-clean:
- -$(MAKE) -C $(OPENWRT_NVRAM_BUILD_DIR) clean
# mtd tool
OPENWRT_MTD_SOURCE=package/openwrt/mtd.c
openwrt-mtd: $(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY)
-# wlconf tool
-OPENWRT_WLCONF_SOURCE=openwrt-wlconf.tar.gz
-OPENWRT_WLCONF_DIR=$(BUILD_DIR)/openwrt-wlconf
-OPENWRT_WLCONF_TARGET_BINARY:=usr/sbin/wlconf
-
-$(DL_DIR)/$(OPENWRT_WLCONF_SOURCE):
- $(WGET) -P $(DL_DIR) $(OPENWRT_SITE)/$(OPENWRT_WLCONF_SOURCE)
+# trx tool
+OPENWRT_TRX_SOURCE=package/openwrt/trx.c
+OPENWRT_TRX_TARGET=$(BUILD_DIR)/trx
-$(OPENWRT_WLCONF_DIR)/.source: $(DL_DIR)/$(OPENWRT_WLCONF_SOURCE)
- zcat $(DL_DIR)/$(OPENWRT_WLCONF_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- touch $(OPENWRT_WLCONF_DIR)/.source
+$(OPENWRT_TRX_TARGET):
+ $(CC) -o $(OPENWRT_TRX_TARGET) $(OPENWRT_TRX_SOURCE)
-$(TARGET_DIR)/$(OPENWRT_WLCONF_TARGET_BINARY): $(OPENWRT_WLCONF_DIR)/.source
- $(MAKE) -C $(OPENWRT_WLCONF_DIR) INSTALLDIR=$(TARGET_DIR) \
- CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
- CFLAGS="$(TARGET_CFLAGS) -I. -I../binary/include -I$(BUILD_DIR)/openwrt-shared \
- -I$(BUILD_DIR)/openwrt-nvram -Wall -DOPENWRT_WLCONF" \
- LDFLAGS="-lnvram -lshared -L$(BUILD_DIR)/openwrt-shared -L$(BUILD_DIR)/openwrt-nvram" \
- install
+openwrt-trx: $(OPENWRT_TRX_TARGET)
-openwrt-wlconf: $(TARGET_DIR)/$(OPENWRT_WLCONF_TARGET_BINARY)
+# addpattern tool
+OPENWRT_ADDPATTERN_SOURCE=package/openwrt/addpattern.c
+OPENWRT_ADDPATTERN_TARGET=$(BUILD_DIR)/addpattern
-openwrt-wlconf-clean:
- -$(MAKE) -C $(OPENWRT_WLCONF_BUILD_DIR) clean
+$(OPENWRT_ADDPATTERN_TARGET):
+ $(CC) -o $(OPENWRT_ADDPATTERN_TARGET) $(OPENWRT_ADDPATTERN_SOURCE)
+openwrt-addpattern: $(OPENWRT_ADDPATTERN_TARGET)
-openwrt: openwrt-shared openwrt-nvram openwrt-mtd openwrt-wlconf
+openwrt: linksys-shared linksys-nvram linksys-wlconf openwrt-mtd openwrt-trx openwrt-addpattern
--- /dev/null
+/*
+ * Copyright (C) 2004 Manuel Novoa III <mjn3@codepoet.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* July 29, 2004
+ *
+ * This is a hacked replacement for the 'trx' utility used to create
+ * wrt54g .trx firmware files. It isn't pretty, but it does the job
+ * for me.
+ *
+ * As an extension, you can specify a larger maximum length for the
+ * .trx file using '-m'. It will be rounded up to be a multiple of 4K.
+ * NOTE: This space will be malloc()'d.
+ *
+ * August 16, 2004
+ *
+ * Sigh... Make it endian-neutral.
+ *
+ * TODO: Support '-b' option to specify offsets for each file.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stddef.h>
+#include <stdint.h>
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+#include <endian.h>
+#include <byteswap.h>
+
+#if __BYTE_ORDER == __BIG_ENDIAN
+#define STORE32_LE(X) bswap_32(X)
+#elif __BYTE_ORDER == __LITTLE_ENDIAN
+#define STORE32_LE(X) (X)
+#else
+#error unkown endianness!
+#endif
+
+uint32_t crc32buf(char *buf, size_t len);
+
+/**********************************************************************/
+/* from trxhdr.h */
+
+#define TRX_MAGIC 0x30524448 /* "HDR0" */
+#define TRX_VERSION 1
+#define TRX_MAX_LEN 0x3A0000
+#define TRX_NO_HEADER 1 /* Do not write TRX header */
+
+struct trx_header {
+ uint32_t magic; /* "HDR0" */
+ uint32_t len; /* Length of file including header */
+ uint32_t crc32; /* 32-bit CRC from flag_version to end of file */
+ uint32_t flag_version; /* 0:15 flags, 16:31 version */
+ uint32_t offsets[3]; /* Offsets of partitions from start of header */
+};
+
+/**********************************************************************/
+
+void usage(void) __attribute__ (( __noreturn__ ));
+
+void usage(void)
+{
+ fprintf(stderr, "Usage: trx [-o outfile] [-m maxlen] file [file [file]]\n");
+ exit(EXIT_FAILURE);
+}
+
+int main(int argc, char **argv)
+{
+ FILE *out = stdout;
+ FILE *in;
+ char *ofn = NULL;
+ char *buf;
+ char *e;
+ int c, i;
+ size_t n;
+ uint32_t cur_len;
+ unsigned long maxlen = TRX_MAX_LEN;
+ struct trx_header *p;
+
+ fprintf(stderr, "mjn3's trx replacement - v0.81\n");
+
+ while ((c = getopt(argc, argv, "o:m:")) != -1) {
+ switch (c) {
+ case 'o':
+ ofn = optarg;
+ break;
+ case 'm':
+ errno = 0;
+ maxlen = strtoul(optarg, &e, 0);
+ if (errno || (e == optarg) || *e) {
+ fprintf(stderr, "illegal numeric string\n");
+ usage();
+ }
+#undef ROUND
+#define ROUND 0x1000
+ if (maxlen & (ROUND-1)) {
+ maxlen += (ROUND - (maxlen & (ROUND-1)));
+ }
+ if (maxlen < ROUND) {
+ fprintf(stderr, "maxlen too small (or wrapped)\n");
+ usage();
+ }
+ break;
+ default:
+ usage();
+ }
+ }
+
+ if (ofn && !(out = fopen(ofn, "w"))) {
+ fprintf(stderr, "can not open \"%s\" for writing\n", ofn);
+ usage();
+ }
+
+ if (optind == argc) {
+ fprintf(stderr, "we require at least one arg\n");
+ usage();
+ }
+
+ if (argc - optind > 3) {
+ fprintf(stderr, "too many args: %d > 3\n", argc - optind);
+ usage();
+ }
+
+ if (maxlen > TRX_MAX_LEN) {
+ fprintf(stderr, "WARNING: maxlen exceeds default maximum! Beware of overwriting nvram!\n");
+ }
+
+ if (!(buf = malloc(maxlen))) {
+ fprintf(stderr, "malloc failed\n");
+ return EXIT_FAILURE;
+ }
+
+ p = (struct trx_header *) buf;
+
+ p->magic = STORE32_LE(TRX_MAGIC);
+ cur_len = sizeof(struct trx_header);
+ p->flag_version = STORE32_LE((TRX_VERSION << 16));
+
+ i = 0;
+
+ while (optind < argc) {
+ p->offsets[i++] = STORE32_LE(cur_len);
+
+ if (!(in = fopen(argv[optind], "r"))) {
+ fprintf(stderr, "can not open \"%s\" for reading\n", argv[optind]);
+ usage();
+ }
+
+ n = fread(buf + cur_len, 1, maxlen - cur_len, in);
+ if (!feof(in)) {
+ fprintf(stderr, "fread failure or file \"%s\" too large\n",
+ argv[optind]);
+ fclose(in);
+ return EXIT_FAILURE;
+ }
+
+ fclose(in);
+
+ ++optind;
+
+ if (optind < argc) {
+#undef ROUND
+#define ROUND 4
+ if (n & (ROUND-1)) {
+ memset(buf + cur_len + n, 0, ROUND - (n & (ROUND-1)));
+ n += ROUND - (n & (ROUND-1));
+ }
+ }
+
+ cur_len += n;
+ }
+
+#undef ROUND
+#define ROUND 0x1000
+ n = cur_len & (ROUND-1);
+ if (n) {
+ memset(buf + cur_len, 0, ROUND - n);
+ cur_len += ROUND - n;
+ }
+
+ p->crc32 = crc32buf((char *) &p->flag_version,
+ cur_len - offsetof(struct trx_header, flag_version));
+ p->crc32 = STORE32_LE(p->crc32);
+
+ p->len = STORE32_LE(cur_len);
+
+ if (!fwrite(buf, cur_len, 1, out) || fflush(out)) {
+ fprintf(stderr, "fwrite failed\n");
+ return EXIT_FAILURE;
+ }
+
+ fclose(out);
+
+ return EXIT_SUCCESS;
+}
+
+/**********************************************************************/
+/* The following was grabbed and tweaked from the old snippets collection
+ * of public domain C code. */
+
+/**********************************************************************\
+|* Demonstration program to compute the 32-bit CRC used as the frame *|
+|* check sequence in ADCCP (ANSI X3.66, also known as FIPS PUB 71 *|
+|* and FED-STD-1003, the U.S. versions of CCITT's X.25 link-level *|
+|* protocol). The 32-bit FCS was added via the Federal Register, *|
+|* 1 June 1982, p.23798. I presume but don't know for certain that *|
+|* this polynomial is or will be included in CCITT V.41, which *|
+|* defines the 16-bit CRC (often called CRC-CCITT) polynomial. FIPS *|
+|* PUB 78 says that the 32-bit FCS reduces otherwise undetected *|
+|* errors by a factor of 10^-5 over 16-bit FCS. *|
+\**********************************************************************/
+
+/* Copyright (C) 1986 Gary S. Brown. You may use this program, or
+ code or tables extracted from it, as desired without restriction.*/
+
+/* First, the polynomial itself and its table of feedback terms. The */
+/* polynomial is */
+/* X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 */
+/* Note that we take it "backwards" and put the highest-order term in */
+/* the lowest-order bit. The X^32 term is "implied"; the LSB is the */
+/* X^31 term, etc. The X^0 term (usually shown as "+1") results in */
+/* the MSB being 1. */
+
+/* Note that the usual hardware shift register implementation, which */
+/* is what we're using (we're merely optimizing it by doing eight-bit */
+/* chunks at a time) shifts bits into the lowest-order term. In our */
+/* implementation, that means shifting towards the right. Why do we */
+/* do it this way? Because the calculated CRC must be transmitted in */
+/* order from highest-order term to lowest-order term. UARTs transmit */
+/* characters in order from LSB to MSB. By storing the CRC this way, */
+/* we hand it to the UART in the order low-byte to high-byte; the UART */
+/* sends each low-bit to hight-bit; and the result is transmission bit */
+/* by bit from highest- to lowest-order term without requiring any bit */
+/* shuffling on our part. Reception works similarly. */
+
+/* The feedback terms table consists of 256, 32-bit entries. Notes: */
+/* */
+/* 1. The table can be generated at runtime if desired; code to do so */
+/* is shown later. It might not be obvious, but the feedback */
+/* terms simply represent the results of eight shift/xor opera- */
+/* tions for all combinations of data and CRC register values. */
+/* */
+/* 2. The CRC accumulation logic is the same for all CRC polynomials, */
+/* be they sixteen or thirty-two bits wide. You simply choose the */
+/* appropriate table. Alternatively, because the table can be */
+/* generated at runtime, you can start by generating the table for */
+/* the polynomial in question and use exactly the same "updcrc", */
+/* if your application needn't simultaneously handle two CRC */
+/* polynomials. (Note, however, that XMODEM is strange.) */
+/* */
+/* 3. For 16-bit CRCs, the table entries need be only 16 bits wide; */
+/* of course, 32-bit entries work OK if the high 16 bits are zero. */
+/* */
+/* 4. The values must be right-shifted by eight bits by the "updcrc" */
+/* logic; the shift must be unsigned (bring in zeroes). On some */
+/* hardware you could probably optimize the shift in assembler by */
+/* using byte-swap instructions. */
+
+static const uint32_t crc_32_tab[] = { /* CRC polynomial 0xedb88320 */
+0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f,
+0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
+0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, 0x1db71064, 0x6ab020f2,
+0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
+0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
+0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
+0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, 0x35b5a8fa, 0x42b2986c,
+0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
+0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423,
+0xcfba9599, 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
+0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190, 0x01db7106,
+0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
+0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d,
+0x91646c97, 0xe6635c01, 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
+0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
+0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
+0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7,
+0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
+0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa,
+0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
+0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81,
+0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
+0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, 0xe3630b12, 0x94643b84,
+0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
+0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
+0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
+0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, 0xd6d6a3e8, 0xa1d1937e,
+0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
+0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55,
+0x316e8eef, 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
+0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, 0xb2bd0b28,
+0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
+0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f,
+0x72076785, 0x05005713, 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
+0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
+0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
+0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69,
+0x616bffd3, 0x166ccf45, 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
+0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc,
+0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
+0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693,
+0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
+0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d
+};
+
+#define UPDC32(octet,crc) (crc_32_tab[((crc) ^ (octet)) & 0xff] ^ ((crc) >> 8))
+
+uint32_t crc32buf(char *buf, size_t len)
+{
+ uint32_t crc;
+
+ crc = 0xFFFFFFFF;
+
+ for ( ; len; --len, ++buf)
+ {
+ crc = UPDC32(*buf, crc);
+ }
+
+ return crc;
+}
projects / openwrt / staging / zorun.git / commitdiff