-CONFIG_32BIT=y
# CONFIG_64BIT is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-CONFIG_BOOT_RAW=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
CONFIG_CEVT_R4K=y
CONFIG_CEVT_R4K_LIB=y
CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_LANTIQ_WDT=y
CONFIG_LEDS_GPIO=y
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_LANTIQ=y
CONFIG_MTD_UIMAGE_SPLIT=y
CONFIG_NLS=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250 is not set
CONFIG_SERIAL_LANTIQ=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
CONFIG_SWAP_IO_SPACE=y
CONFIG_SWCONFIG=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TREE_RCU=y
CONFIG_ZONE_DMA_FLAG=0
$(eval $(call Profile,ARV4525PW))
+define Profile/ARV7525PW
+ NAME:=ARV7525PW - Speedport W303V Typ A
+ PACKAGES:= kmod-usb-core kmod-usb-dwc-otg \
+ kmod-ledtrig-netdev kmod-ledtrig-usbdev kmod-leds-gpio kmod-button-hotplug \
+ kmod-rt2800-pci wpad-mini kmod-ltq-dsl-firmware-b
+endef
+
+define Profile/ARV4525PW/Description
+ Package set optimized for the ARV4525PW
+endef
+
+$(eval $(call Profile,ARV7525PW))
+
define Profile/ARV452CPW
NAME:=ARV452CPW - Arcor Easybox 801
PACKAGES:= kmod-usb-core kmod-usb-dwc-otg \
$(eval $(call Profile,ARV452CPW))
+define Profile/ARV752DPW
+ NAME:=ARV752DPW - Arcor Easybox 802
+ PACKAGES:= kmod-usb-core kmod-usb-dwc-otg \
+ kmod-ledtrig-netdev kmod-ledtrig-usbdev kmod-leds-gpio kmod-button-hotplug \
+ kmod-rt2800-pci kmod-ltq-dsl-firmware-b
+endef
+
+define Profile/ARV752DPW/Description
+ Package set optimized for the ARV752PW
+endef
+
+$(eval $(call Profile,ARV752DPW))
+
define Profile/ARV752DPW22
NAME:=ARV752DPW22 - Arcor Easybox 803
PACKAGES:= kmod-usb-core kmod-usb2 kmod-usb-uhci kmod-usb-dwc-otg \
$(call Image/Build/$(1),$(1),ARV4525PW)
endef
+define Image/BuildKernel/Profile/ARV7525PW
+ $(call Image/BuildKernel/Template,ARV7525PW,$(xway_cmdline))
+endef
+
+define Image/Build/Profile/ARV7525PW
+ $(call Image/Build/$(1),$(1),ARV7525PW)
+endef
+
define Image/BuildKernel/Profile/ARV452CPW
$(call Image/BuildKernel/Template,ARV452CPW,$(xway_cmdline))
endef
$(call Image/Build/$(1),$(1),ARV7518PW)
endef
+define Image/BuildKernel/Profile/ARV752DPW
+ $(call Image/BuildKernel/Template,ARV752DPW,$(xway_cmdline))
+endef
+
+define Image/Build/Profile/ARV752DPW
+ $(call Image/Build/$(1),$(1),ARV752DPW)
+endef
+
define Image/BuildKernel/Profile/ARV752DPW22
$(call Image/BuildKernel/Template,ARV752DPW22,$(xway_cmdline))
endef
$(call Image/BuildKernel/Template,ARV4520PW,$(xway_cmdline))
$(call Image/BuildKernel/Template,ARV452CPW,$(xway_cmdline))
$(call Image/BuildKernel/Template,ARV4525PW,$(xway_cmdline))
+ $(call Image/BuildKernel/Template,ARV7525PW,$(xway_cmdline))
$(call Image/BuildKernel/Template,ARV7518PW,$(xway_cmdline))
$(call Image/BuildKernel/Template,ARV752DPW,$(xway_cmdline))
$(call Image/BuildKernel/Template,ARV752DPW22,$(xway_cmdline))
$(call Image/Build/$(1),$(1),ARV4520PW)
$(call Image/Build/$(1),$(1),ARV452CPW)
$(call Image/Build/$(1),$(1),ARV4525PW)
+ $(call Image/Build/$(1),$(1),ARV7525PW)
$(call Image/Build/$(1),$(1),ARV7518PW)
$(call Image/Build/$(1),$(1),ARV752DPW)
$(call Image/Build/$(1),$(1),ARV752DPW22)
--- a/arch/mips/lantiq/xway/mach-easy50601.c
+++ b/arch/mips/lantiq/xway/mach-easy50601.c
-@@ -32,12 +32,7 @@
+@@ -32,12 +32,7 @@ static struct mtd_partition easy50601_pa
{
.name = "linux",
.offset = 0x20000,
--- a/arch/mips/lantiq/xway/mach-easy50712.c
+++ b/arch/mips/lantiq/xway/mach-easy50712.c
-@@ -34,12 +34,7 @@
+@@ -34,12 +34,7 @@ static struct mtd_partition easy50712_pa
{
.name = "linux",
.offset = 0x20000,
endif
--- a/arch/mips/lantiq/falcon/Makefile
+++ b/arch/mips/lantiq/falcon/Makefile
-@@ -2,3 +2,4 @@ obj-y := clk-falcon.o devices.o gpio.o p
- obj-y += softdog_vpe.o
+@@ -3,3 +3,4 @@ obj-y += softdog_vpe.o
+ obj-$(CONFIG_LANTIQ_MACH_EASY98000) += addon-easy98000.o
obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o
obj-$(CONFIG_LANTIQ_MACH_EASY98000) += dev-leds-easy98000-cpld.o
+obj-$(CONFIG_LANTIQ_MACH_EASY98020) += mach-easy98020.o
endif
--- a/arch/mips/lantiq/falcon/Makefile
+++ b/arch/mips/lantiq/falcon/Makefile
-@@ -3,3 +3,4 @@ obj-y += softdog_vpe.o
+@@ -4,3 +4,4 @@ obj-$(CONFIG_LANTIQ_MACH_EASY98000) += a
obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o
obj-$(CONFIG_LANTIQ_MACH_EASY98000) += dev-leds-easy98000-cpld.o
obj-$(CONFIG_LANTIQ_MACH_EASY98020) += mach-easy98020.o
+obj-$(CONFIG_LANTIQ_MACH_95C3AM1) += mach-95C3AM1.o
--- a/arch/mips/lantiq/machtypes.h
+++ b/arch/mips/lantiq/machtypes.h
-@@ -20,6 +20,7 @@ enum lantiq_mach_type {
- LANTIQ_MACH_EASY98000, /* Falcon Eval Board, NOR Flash */
+@@ -21,6 +21,7 @@ enum lantiq_mach_type {
LANTIQ_MACH_EASY98000SF, /* Falcon Eval Board, Serial Flash */
+ LANTIQ_MACH_EASY98000NAND, /* Falcon Eval Board, NAND Flash */
LANTIQ_MACH_EASY98020, /* Falcon Reference Board */
+ LANTIQ_MACH_95C3AM1, /* Board 95C3AM1 */
};
--- a/arch/mips/lantiq/xway/Kconfig
+++ b/arch/mips/lantiq/xway/Kconfig
-@@ -6,6 +6,10 @@ config LANTIQ_MACH_EASY50712
+@@ -6,6 +6,10 @@
bool "Easy50712 - Danube"
default y
endif
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
-@@ -5,3 +5,4 @@ obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o
+@@ -5,3 +5,4 @@
obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+obj-$(CONFIG_LANTIQ_MACH_ARV45XX) += mach-arv45xx.o
--- /dev/null
+++ b/arch/mips/lantiq/xway/mach-arv45xx.c
-@@ -0,0 +1,504 @@
+@@ -0,0 +1,634 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
-+#include <linux/gpio_buttons.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include "devices.h"
+#include "dev-leds-gpio.h"
+#include "dev-dwc_otg.h"
++#include "../dev-gpio-buttons.h"
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition arv4510_partitions[] =
+ },
+};
+
++static struct mtd_partition arv7525_partitions[] =
++{
++ {
++ .name = "uboot",
++ .offset = 0x0,
++ .size = 0x10000,
++ },
++ {
++ .name = "uboot_env",
++ .offset = 0x10000,
++ .size = 0x10000,
++ },
++ {
++ .name = "linux",
++ .offset = 0x20000,
++ .size = 0x3d0000,
++ },
++ {
++ .name = "board_config",
++ .offset = 0x3f0000,
++ .size = 0x10000,
++ },
++};
+#endif
+
+static struct physmap_flash_data arv4510_flash_data = {
+#endif
+};
+
++static struct physmap_flash_data arv7525_flash_data = {
++#ifdef CONFIG_MTD_PARTITIONS
++ .nr_parts = ARRAY_SIZE(arv7525_partitions),
++ .parts = arv7525_partitions,
++#endif
++};
++
+static struct ltq_pci_data ltq_pci_data = {
+ .clock = PCI_CLOCK_EXT,
+ .gpio = PCI_GNT1 | PCI_REQ1,
+ { .name = "soc:green:fxo", .gpio = 75, .active_low = 1, .default_trigger = "default-on" },
+};
+
-+static struct gpio_button
-+arv4518pw_gpio_buttons[] __initdata = {
-+ { .desc = "wlan", .type = EV_KEY, .code = BTN_0, .threshold = 3, .gpio = 28, .active_low = 1, },
-+ { .desc = "wps", .type = EV_KEY, .code = BTN_1, .threshold = 3, .gpio = 29, .active_low = 1, },
-+ { .desc = "reset", .type = EV_KEY, .code = BTN_2, .threshold = 3, .gpio = 30, .active_low = 1, },
++static struct gpio_keys_button
++arv4518pw_gpio_keys[] __initdata = {
++ {
++ .desc = "wlan",
++ .type = EV_KEY,
++ .code = BTN_0,
++ .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = 28,
++ .active_low = 1,
++ },
++ {
++ .desc = "wps",
++ .type = EV_KEY,
++ .code = BTN_1,
++ .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = 29,
++ .active_low = 1,
++ },
++ {
++ .desc = "reset",
++ .type = EV_KEY,
++ .code = BTN_2,
++ .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = 30,
++ .active_low = 1,
++ },
+};
+
+static struct gpio_led
+ { .name = "soc:green:eth4", .gpio = 86, .active_low = 1, .default_trigger = "default-on", },
+};
+
-+static struct gpio_button
-+arv752dpw22_gpio_buttons[] __initdata = {
-+ { .desc = "btn0", .type = EV_KEY, .code = BTN_0, .threshold = 3, .gpio = 12, .active_low = 1, },
-+ { .desc = "btn1", .type = EV_KEY, .code = BTN_1, .threshold = 3, .gpio = 13, .active_low = 1, },
-+ { .desc = "btn2", .type = EV_KEY, .code = BTN_2, .threshold = 3, .gpio = 28, .active_low = 1, },
++static struct gpio_keys_button
++arv752dpw22_gpio_keys[] __initdata = {
++ {
++ .desc = "btn0",
++ .type = EV_KEY,
++ .code = BTN_0,
++ .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = 12,
++ .active_low = 1,
++ },
++ {
++ .desc = "btn1",
++ .type = EV_KEY,
++ .code = BTN_1,
++ .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = 13,
++ .active_low = 1,
++ },
++ {
++ .desc = "btn2",
++ .type = EV_KEY,
++ .code = BTN_2,
++ .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = 28,
++ .active_low = 1,
++ },
+};
+
+static struct gpio_led
+ { .name = "soc:green:usb", .gpio = 19, .active_low = 1, },
+};
+
-+static struct gpio_button
-+arv7518pw_gpio_buttons[] __initdata = {
-+ { .desc = "reset", .type = EV_KEY, .code = BTN_0, .threshold = 3, .gpio = 23, .active_low = 1, },
-+ { .desc = "wlan", .type = EV_KEY, .code = BTN_1, .threshold = 3, .gpio = 25, .active_low = 1, },
++static struct gpio_keys_button
++arv7518pw_gpio_keys[] __initdata = {
++ {
++ .desc = "reset",
++ .type = EV_KEY,
++ .code = BTN_0,
++ .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = 23,
++ .active_low = 1,
++ },
++ {
++ .desc = "wlan",
++ .type = EV_KEY,
++ .code = BTN_1,
++ .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = 25,
++ .active_low = 1,
++ },
+};
+
+static void
+ p[i] = ((eeprom_data[(i<<1)+1]&0xff)<<24)|((eeprom_data[(i<<1)+1]&0xff00)<<8)|((eeprom_data[i<<1]&0xff)<<8)|((eeprom_data[i<<1]&0xff00)>>8);
+ if (i == 0xbf>>1){
+ // printk ("regdomain: 0x%x --> 0x%x\n", p[i], (p[i] & 0xffff0000)|0x67);
-+ /* regdomain is invalid?? how did original fw convert
++ /* regdomain is invalid?? how did original fw convert
+ * value to 0x82d4 ??
+ * for now, force to 0x67 */
+ p[i] &= 0xffff0000;
+#define ARV4518PW_EBU 0
+#define ARV4518PW_USB 14
+#define ARV4518PW_SWITCH_RESET 13
++#define ARV4518PW_MADWIFI_ADDR 0xb07f0400
+
+ ltq_register_gpio_ebu(ARV4518PW_EBU);
+ ltq_add_device_leds_gpio(-1, ARRAY_SIZE(arv4518pw_leds_gpio), arv4518pw_leds_gpio);
-+ ltq_register_gpio_buttons(arv4518pw_gpio_buttons, ARRAY_SIZE(arv4518pw_gpio_buttons));
++ ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(arv4518pw_gpio_keys), arv4518pw_gpio_keys);
+ ltq_register_nor(&arv45xx_flash_data);
+ ltq_pci_data.gpio = PCI_GNT2 | PCI_REQ2;
+ ltq_register_pci(<q_pci_data);
-+ ltq_register_madwifi_eep();
++ ltq_register_madwifi_eep(ARV4518PW_MADWIFI_ADDR);
+ xway_register_dwc(ARV4518PW_USB);
+ arv45xx_register_ethernet();
+ arv45xx_register_ath5k();
+#define ARV452CPW_RELAY1 31
+#define ARV452CPW_RELAY2 79
+#define ARV452CPW_SWITCH_RESET 82
++#define ARV452CPW_MADWIFI_ADDR 0xb07f0400
+
+ ltq_register_gpio_ebu(ARV452CPW_EBU);
+ ltq_add_device_leds_gpio(-1, ARRAY_SIZE(arv452cpw_leds_gpio), arv452cpw_leds_gpio);
+ ltq_register_nor(&arv45xx_flash_data);
+ ltq_register_pci(<q_pci_data);
-+ ltq_register_madwifi_eep();
++ ltq_register_madwifi_eep(ARV452CPW_MADWIFI_ADDR);
+ xway_register_dwc(ARV452CPW_USB);
+ arv45xx_register_ethernet();
+ arv45xx_register_ath5k();
+static void __init
+arv4525pw_init(void)
+{
++#define ARV4525PW_MADWIFI_ADDR 0xb07f0400
++
+ ltq_add_device_leds_gpio(-1, ARRAY_SIZE(arv4525pw_leds_gpio), arv4525pw_leds_gpio);
+ ltq_register_nor(&arv45xx_flash_data);
+ ltq_pci_data.clock = PCI_CLOCK_INT;
+ ltq_register_pci(<q_pci_data);
-+ ltq_register_madwifi_eep();
++ ltq_register_madwifi_eep(ARV4525PW_MADWIFI_ADDR);
+ ltq_eth_data.mii_mode = PHY_INTERFACE_MODE_MII;
+ arv45xx_register_ethernet();
+}
+ arv4525pw_init);
+
+static void __init
++arv7525pw_init(void)
++{
++ ltq_add_device_leds_gpio(-1, ARRAY_SIZE(arv4525pw_leds_gpio), arv4525pw_leds_gpio);
++ ltq_register_nor(&arv7525_flash_data);
++ ltq_register_pci(<q_pci_data);
++ ltq_eth_data.mii_mode = PHY_INTERFACE_MODE_MII;
++ ltq_register_tapi();
++ arv45xx_register_ethernet();
++}
++
++MIPS_MACHINE(LANTIQ_MACH_ARV7525PW,
++ "ARV7525PW",
++ "ARV7525PW - Speedport W303V",
++ arv7525pw_init);
++
++static void __init
+arv7518pw_init(void)
+{
+#define ARV7518PW_EBU 0x2
+
+ ltq_register_gpio_ebu(ARV7518PW_EBU);
+ ltq_add_device_leds_gpio(-1, ARRAY_SIZE(arv7518pw_leds_gpio), arv7518pw_leds_gpio);
-+ ltq_register_gpio_buttons(arv7518pw_gpio_buttons, ARRAY_SIZE(arv7518pw_gpio_buttons));
++ ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(arv7518pw_gpio_keys), arv7518pw_gpio_keys);
+ ltq_register_nor(&arv75xx_flash_data);
+ ltq_register_pci(<q_pci_data);
+ ltq_register_tapi();
+ "ARV7518PW - ASTORIA",
+ arv7518pw_init);
+
++
++static void __init
++arv752dpw_init(void)
++{
++#define ARV752DPW22_EBU 0x2
++#define ARV752DPW22_USB 72
++#define ARV752DPW22_RELAY 73
++ ltq_register_gpio_ebu(ARV752DPW22_EBU);
++ ltq_add_device_leds_gpio(-1, ARRAY_SIZE(arv752dpw22_leds_gpio), arv752dpw22_leds_gpio);
++ ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(arv752dpw22_gpio_keys), arv752dpw22_gpio_keys);
++ ltq_register_nor(&arv75xx_flash_data);
++ ltq_register_pci(<q_pci_data);
++ xway_register_dwc(ARV752DPW22_USB);
++ arv75xx_register_ethernet();
++ gpio_request(ARV752DPW22_RELAY, "relay");
++ gpio_set_value(ARV752DPW22_RELAY, 1);
++ gpio_export(ARV752DPW22_RELAY, 0);
++}
++
++MIPS_MACHINE(LANTIQ_MACH_ARV752DPW,
++ "ARV752DPW",
++ "ARV752DPW - Arcor A802",
++ arv752dpw_init);
++
+static void __init
+arv752dpw22_init(void)
+{
+
+ ltq_register_gpio_ebu(ARV752DPW22_EBU);
+ ltq_add_device_leds_gpio(-1, ARRAY_SIZE(arv752dpw22_leds_gpio), arv752dpw22_leds_gpio);
-+ ltq_register_gpio_buttons(arv752dpw22_gpio_buttons, ARRAY_SIZE(arv752dpw22_gpio_buttons));
++ ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(arv752dpw22_gpio_keys), arv752dpw22_gpio_keys);
+ ltq_register_nor(&arv75xx_flash_data);
-+ ltq_pci_data.irq[15] = (INT_NUM_IM2_IRL0 + 31);
++ ltq_pci_data.irq[15] = (INT_NUM_IM3_IRL0 + 31);
+ ltq_pci_data.gpio |= PCI_EXIN1 | PCI_REQ2;
+ ltq_register_pci(<q_pci_data);
+ xway_register_dwc(ARV752DPW22_USB);
+ arv752dpw22_init);
--- a/arch/mips/lantiq/machtypes.h
+++ b/arch/mips/lantiq/machtypes.h
-@@ -21,6 +21,17 @@ enum lantiq_mach_type {
- LANTIQ_MACH_EASY98000SF, /* Falcon Eval Board, Serial Flash */
+@@ -22,6 +22,18 @@
+ LANTIQ_MACH_EASY98000NAND, /* Falcon Eval Board, NAND Flash */
LANTIQ_MACH_EASY98020, /* Falcon Reference Board */
LANTIQ_MACH_95C3AM1, /* Board 95C3AM1 */
+
+ LANTIQ_MACH_ARV4520PW, /* Airties WAV-281, Arcor EasyboxA800 */
+ LANTIQ_MACH_ARV452CPW, /* Arcor EasyboxA801 */
+ LANTIQ_MACH_ARV4525PW, /* Speedport W502V */
++ LANTIQ_MACH_ARV7525PW, /* Speedport W303V Typ A */
+ LANTIQ_MACH_ARV752DPW, /* Arcor easybox a802 */
+ LANTIQ_MACH_ARV752DPW22, /* Arcor easybox a803 */
+ LANTIQ_MACH_ARV7518PW, /* ASTORIA */
--- a/drivers/net/lantiq_etop.c
+++ b/drivers/net/lantiq_etop.c
-@@ -155,8 +155,12 @@
+@@ -155,8 +155,12 @@ ltq_etop_hw_receive(struct ltq_etop_chan
skb_put(skb, len);
skb->dev = ch->netdev;
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -193,6 +193,14 @@
+@@ -193,6 +193,14 @@ config SPI_IMX
This enables using the Freescale i.MX SPI controllers in master
mode.
depends on PARPORT && EXPERIMENTAL
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
-@@ -26,6 +26,7 @@
+@@ -26,6 +26,7 @@ obj-$(CONFIG_SPI_EP93XX) += ep93xx_spi.
obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o
obj-$(CONFIG_SPI_IMX) += spi_imx.o
#include <asm/bootinfo.h>
#include <asm/irq.h>
-@@ -119,3 +120,41 @@
+@@ -119,3 +120,41 @@ ltq_register_etop(struct ltq_eth_data *e
platform_device_register(<q_etop);
}
}
--- a/arch/mips/lantiq/xway/devices.c
+++ b/arch/mips/lantiq/xway/devices.c
-@@ -144,6 +144,16 @@ ltq_register_gpio_ebu(unsigned int value
+@@ -144,6 +144,19 @@ ltq_register_gpio_ebu(unsigned int value
platform_device_register(<q_ebu);
}
+/* madwifi */
+int lantiq_emulate_madwifi_eep = 0;
++unsigned long long lantiq_madwifi_eep_addr = 0;
+EXPORT_SYMBOL(lantiq_emulate_madwifi_eep);
++EXPORT_SYMBOL(lantiq_madwifi_eep_addr);
+
+void __init
-+ltq_register_madwifi_eep(void)
++ltq_register_madwifi_eep(unsigned long long addr)
+{
+ lantiq_emulate_madwifi_eep = 1;
++ lantiq_madwifi_eep_addr = addr;
+}
+
static struct resource ltq_spi_resources[] = {
extern void ltq_register_ase_asc(void);
extern void ltq_register_etop(struct ltq_eth_data *eth);
extern void ltq_register_gpio_ebu(unsigned int value);
-+extern void ltq_register_madwifi_eep(void);
++extern void ltq_register_madwifi_eep(unsigned long long addr);
#endif
---- a/arch/mips/lantiq/xway/devices.c
-+++ b/arch/mips/lantiq/xway/devices.c
-@@ -154,6 +154,26 @@ ltq_register_madwifi_eep(void)
- lantiq_emulate_madwifi_eep = 1;
- }
+--- a/arch/mips/lantiq/Makefile
++++ b/arch/mips/lantiq/Makefile
+@@ -4,7 +4,7 @@
+ # under the terms of the GNU General Public License version 2 as published
+ # by the Free Software Foundation.
-+/* gpio buttons */
-+static struct gpio_buttons_platform_data ltq_gpio_buttons_platform_data;
+-obj-y := irq.o setup.o clk.o prom.o devices.o
++obj-y := irq.o setup.o clk.o prom.o devices.o dev-gpio-buttons.o
+
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+--- /dev/null
++++ b/arch/mips/lantiq/dev-gpio-buttons.c
+@@ -0,0 +1,58 @@
++/*
++ * Lantiq GPIO button support
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
+
-+static struct platform_device ltq_gpio_buttons_platform_device =
-+{
-+ .name = "gpio-buttons",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = (void *) <q_gpio_buttons_platform_data,
-+ },
-+};
-+
-+void __init
-+ltq_register_gpio_buttons(struct gpio_button *buttons, int cnt)
++#include "linux/init.h"
++#include "linux/slab.h"
++#include <linux/platform_device.h>
++
++#include "dev-gpio-buttons.h"
++
++void __init ltq_register_gpio_keys_polled(int id,
++ unsigned poll_interval,
++ unsigned nbuttons,
++ struct gpio_keys_button *buttons)
+{
-+ ltq_gpio_buttons_platform_data.buttons = buttons;
-+ ltq_gpio_buttons_platform_data.nbuttons = cnt;
-+ platform_device_register(<q_gpio_buttons_platform_device);
++ struct platform_device *pdev;
++ struct gpio_keys_platform_data pdata;
++ struct gpio_keys_button *p;
++ int err;
++
++ p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL);
++ if (!p)
++ return;
++
++ memcpy(p, buttons, nbuttons * sizeof(*p));
++
++ pdev = platform_device_alloc("gpio-keys-polled", id);
++ if (!pdev)
++ goto err_free_buttons;
++
++ memset(&pdata, 0, sizeof(pdata));
++ pdata.poll_interval = poll_interval;
++ pdata.nbuttons = nbuttons;
++ pdata.buttons = p;
++
++ err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
++ if (err)
++ goto err_put_pdev;
++
++ err = platform_device_add(pdev);
++ if (err)
++ goto err_put_pdev;
++
++ return;
++
++err_put_pdev:
++ platform_device_put(pdev);
++
++err_free_buttons:
++ kfree(p);
+}
+--- /dev/null
++++ b/arch/mips/lantiq/dev-gpio-buttons.h
+@@ -0,0 +1,26 @@
++/*
++ * Lantiq GPIO button support
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
+
- static struct resource ltq_spi_resources[] = {
- {
- .start = LTQ_SSC_BASE_ADDR,
---- a/arch/mips/lantiq/xway/devices.h
-+++ b/arch/mips/lantiq/xway/devices.h
-@@ -11,6 +11,7 @@
-
- #include "../devices.h"
- #include <linux/phy.h>
-+#include <linux/gpio_buttons.h>
-
- extern void ltq_register_gpio(void);
- extern void ltq_register_gpio_stp(void);
-@@ -18,5 +19,6 @@ extern void ltq_register_ase_asc(void);
- extern void ltq_register_etop(struct ltq_eth_data *eth);
- extern void ltq_register_gpio_ebu(unsigned int value);
- extern void ltq_register_madwifi_eep(void);
-+extern void ltq_register_gpio_buttons(struct gpio_button *buttons, int cnt);
-
- #endif
++#ifndef _LANTIQ_DEV_GPIO_BUTTONS_H
++#define _LANTIQ_DEV_GPIO_BUTTONS_H
++
++#include <linux/input.h>
++#include <linux/gpio_keys.h>
++
++#define LTQ_KEYS_POLL_INTERVAL 20 /* msecs */
++#define LTQ_KEYS_DEBOUNCE_INTERVAL (3 * LTQ_KEYS_POLL_INTERVAL)
++
++void ltq_register_gpio_keys_polled(int id,
++ unsigned poll_interval,
++ unsigned nbuttons,
++ struct gpio_keys_button *buttons);
++
++#endif /* _LANTIQ_DEV_GPIO_BUTTONS_H */
#endif
--- a/arch/mips/lantiq/xway/mach-easy50712.c
+++ b/arch/mips/lantiq/xway/mach-easy50712.c
-@@ -66,6 +66,7 @@ static void __init easy50712_init(void)
+@@ -61,6 +61,7 @@ static void __init easy50712_init(void)
ltq_register_nor(&easy50712_flash_data);
ltq_register_pci(<q_pci_data);
ltq_register_etop(<q_eth_data);
+#endif
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
-@@ -2812,11 +2812,11 @@ hub_port_init (struct usb_hub *hub, stru
+@@ -2814,11 +2814,11 @@ hub_port_init (struct usb_hub *hub, stru
udev->ttport = hdev->ttport;
} else if (udev->speed != USB_SPEED_HIGH
&& hdev->speed == USB_SPEED_HIGH) {
# under the terms of the GNU General Public License version 2 as published
# by the Free Software Foundation.
--obj-y := irq.o setup.o clk.o prom.o devices.o
-+obj-y := irq.o setup.o clk.o prom.o devices.o dev-leds-gpio.o
+-obj-y := irq.o setup.o clk.o prom.o devices.o dev-gpio-buttons.o
++obj-y := irq.o setup.o clk.o prom.o devices.o dev-gpio-buttons.o dev-leds-gpio.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
--- a/arch/mips/lantiq/machtypes.h
+++ b/arch/mips/lantiq/machtypes.h
-@@ -32,6 +32,9 @@
+@@ -34,6 +34,9 @@ enum lantiq_mach_type {
LANTIQ_MACH_ARV752DPW, /* Arcor easybox a802 */
LANTIQ_MACH_ARV752DPW22, /* Arcor easybox a803 */
LANTIQ_MACH_ARV7518PW, /* ASTORIA */
#endif
--- a/arch/mips/lantiq/xway/Kconfig
+++ b/arch/mips/lantiq/xway/Kconfig
-@@ -10,6 +10,10 @@
+@@ -10,6 +10,10 @@ config LANTIQ_MACH_ARV45XX
bool "ARV45XX"
default y
endif
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
-@@ -6,4 +6,5 @@
+@@ -6,4 +6,5 @@ obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o
obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
obj-$(CONFIG_LANTIQ_MACH_ARV45XX) += mach-arv45xx.o
obj-y += dev-dwc_otg.o
--- a/arch/mips/lantiq/xway/devices.h
+++ b/arch/mips/lantiq/xway/devices.h
-@@ -12,6 +12,7 @@
+@@ -11,6 +11,7 @@
+
#include "../devices.h"
#include <linux/phy.h>
- #include <linux/gpio_buttons.h>
+#include <linux/spi/spi.h>
extern void ltq_register_gpio(void);
extern void ltq_register_gpio_stp(void);
-@@ -20,5 +21,7 @@
+@@ -18,5 +19,7 @@ extern void ltq_register_ase_asc(void);
+ extern void ltq_register_etop(struct ltq_eth_data *eth);
extern void ltq_register_gpio_ebu(unsigned int value);
- extern void ltq_register_madwifi_eep(void);
- extern void ltq_register_gpio_buttons(struct gpio_button *buttons, int cnt);
+ extern void ltq_register_madwifi_eep(unsigned long long addr);
+extern void ltq_register_spi(struct ltq_spi_platform_data *pdata,
+ struct spi_board_info const *info, unsigned n);
--- a/arch/mips/lantiq/xway/Kconfig
+++ b/arch/mips/lantiq/xway/Kconfig
-@@ -14,6 +14,10 @@
+@@ -14,6 +14,11 @@ config LANTIQ_MACH_NETGEAR
bool "Netgear"
default y
+config LANTIQ_MACH_GIGASX76X
+ bool "GIGASX76X"
++ select LTQ_DEV_GPIO_BUTTONS
+ default y
+
endmenu
endif
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
-@@ -7,4 +7,5 @@
+@@ -7,4 +7,5 @@ obj-$(CONFIG_LANTIQ_MACH_EASY50712) += m
obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
obj-$(CONFIG_LANTIQ_MACH_ARV45XX) += mach-arv45xx.o
obj-$(CONFIG_LANTIQ_MACH_NETGEAR) += mach-netgear.o
obj-y += dev-dwc_otg.o
--- /dev/null
+++ b/arch/mips/lantiq/xway/mach-gigasx76x.c
-@@ -0,0 +1,113 @@
+@@ -0,0 +1,209 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ *
+ */
+
++#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
-+#include <linux/gpio_buttons.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/ath5k_platform.h>
+#include <linux/pci.h>
+#include <linux/phy.h>
++#include <linux/io.h>
++#include <linux/string.h>
+
+#include <irq.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_platform.h>
+
-+#include "../machtypes.h"
+#include "devices.h"
+#include "dev-dwc_otg.h"
-+#include "dev-leds-gpio.h"
++#include "../machtypes.h"
++#include "../dev-leds-gpio.h"
++#include "../dev-gpio-buttons.h"
++
++#define UBOOT_ENV_OFFSET 0x010000
++#define UBOOT_ENV_SIZE 0x010000
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition gigasx76x_partitions[] =
+{
+ {
-+ .name = "secondary_env",
-+ .offset = 0xe000,
-+ .size = 0x2000,
-+ },
-+ {
-+ .name = "secondary_boot",
-+ .offset = 0x10000,
-+ .size = 0x10000,
++ .name = "uboot",
++ .offset = 0x000000,
++ .size = 0x010000,
+ },
+ {
-+ .name = "uboot",
-+ .offset = 0x20000,
-+ .size = 0x30000,
++ .name = "uboot_env",
++ .offset = UBOOT_ENV_OFFSET,
++ .size = UBOOT_ENV_SIZE,
+ },
+ {
+ .name = "linux",
-+ .offset = 0x50000,
-+ .size = 0x7a0000,
++ .offset = 0x020000,
++ .size = 0x7d0000,
+ },
+ {
+ .name = "board_config",
+ .offset = 0x7f0000,
-+ .size = 0x10000,
++ .size = 0x010000,
+ },
+};
+#endif
+
+static struct gpio_led
-+gigasx76x_leds_gpio[] __initdata = {
++gigasx76x_gpio_leds[] __initdata = {
+ { .name = "soc:green:usb", .gpio = 50, },
+ { .name = "soc:green:wlan", .gpio = 51, },
+ { .name = "soc:green:phone2", .gpio = 52, },
+ { .name = "soc:green:phone1", .gpio = 53, },
+ { .name = "soc:green:line", .gpio = 54, },
+ { .name = "soc:green:online", .gpio = 55, },
++ { .name = "soc:green:voip", .gpio = 56, },
+};
+
++static struct gpio_keys_button
++gigasx76x_gpio_keys[] __initdata = {
++ {
++ .desc = "reset",
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = 14,
++ .active_low = 1,
++ },
++};
+
+static struct physmap_flash_data gigasx76x_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+};
+
+static struct ltq_pci_data ltq_pci_data = {
-+ .clock = PCI_CLOCK_INT,
-+ .gpio = PCI_GNT1 | PCI_REQ1,
-+ .irq = {
-+ [14] = INT_NUM_IM0_IRL0 + 22,
-+ },
++ .clock = PCI_CLOCK_INT,
++ .gpio = PCI_GNT1 | PCI_REQ1,
++ .irq = { [14] = INT_NUM_IM0_IRL0 + 22, },
+};
+
+static struct ltq_eth_data ltq_eth_data = {
-+ .mii_mode = PHY_INTERFACE_MODE_MII,
++ .mii_mode = PHY_INTERFACE_MODE_MII,
+};
+
-+static void __init
-+gigasx76x_init(void)
-+{
-+#define GIGASX76X_USB 29
++static char __init *get_uboot_env_var(char *haystack, int haystack_len, char *needle, int needle_len) {
++ int i;
++ for (i = 0; i <= haystack_len - needle_len; i++) {
++ if (memcmp(haystack + i, needle, needle_len) == 0) {
++ return haystack + i + needle_len;
++ }
++ }
++ return NULL;
++}
++
++/*
++ * gigasx76x_parse_hex_* are not uniq. in arm/orion there are also duplicates:
++ * dns323_parse_hex_*
++ * TODO: one day write a patch for this :)
++ */
++static int __init gigasx76x_parse_hex_nibble(char n) {
++ if (n >= '0' && n <= '9')
++ return n - '0';
++
++ if (n >= 'A' && n <= 'F')
++ return n - 'A' + 10;
++
++ if (n >= 'a' && n <= 'f')
++ return n - 'a' + 10;
++
++ return -1;
++}
++
++static int __init gigasx76x_parse_hex_byte(const char *b) {
++ int hi;
++ int lo;
++
++ hi = gigasx76x_parse_hex_nibble(b[0]);
++ lo = gigasx76x_parse_hex_nibble(b[1]);
++
++ if (hi < 0 || lo < 0)
++ return -1;
++
++ return (hi << 4) | lo;
++}
++
++static int __init gigasx76x_register_ethernet(void) {
++ u_int8_t addr[6];
++ int i;
++ char *uboot_env_page;
++ char *mac;
++
++ uboot_env_page = ioremap(LTQ_FLASH_START + UBOOT_ENV_OFFSET, UBOOT_ENV_SIZE);
++ if (!uboot_env_page)
++ return -ENOMEM;
++
++ mac = get_uboot_env_var(uboot_env_page, UBOOT_ENV_SIZE, "\0ethaddr=", 9);
++
++ if (!mac) {
++ goto error_fail;
++ }
++
++ /* Sanity check the string we're looking at */
++ for (i = 0; i < 5; i++) {
++ if (*(mac + (i * 3) + 2) != ':') {
++ goto error_fail;
++ }
++ }
++
++ for (i = 0; i < 6; i++) {
++ int byte;
++ byte = gigasx76x_parse_hex_byte(mac + (i * 3));
++ if (byte < 0) {
++ goto error_fail;
++ }
++ addr[i] = byte;
++ }
++
++ iounmap(uboot_env_page);
++ printk("GIGASX76X: Found ethernet MAC address: ");
++ for (i = 0; i < 6; i++)
++ printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
++
++ memcpy(<q_eth_data.mac.sa_data, addr, 6);
++ ltq_register_etop(<q_eth_data);
++
++ return 0;
++
++ error_fail:
++ iounmap(uboot_env_page);
++ return -EINVAL;
++}
++
++static void __init gigasx76x_init(void) {
++#define GIGASX76X_USB 29
++#define GIGASX76X_MADWIFI_ADDR 0xb07f0000
+
+ ltq_register_gpio_stp();
+ ltq_register_nor(&gigasx76x_flash_data);
+ ltq_register_pci(<q_pci_data);
-+ ltq_register_etop(<q_eth_data);
++ gigasx76x_register_ethernet();
+ xway_register_dwc(GIGASX76X_USB);
+ ltq_register_tapi();
-+ ltq_register_madwifi_eep();
-+ ltq_add_device_leds_gpio(-1, ARRAY_SIZE(gigasx76x_leds_gpio), gigasx76x_leds_gpio);
++ ltq_register_madwifi_eep(GIGASX76X_MADWIFI_ADDR);
++ ltq_add_device_leds_gpio(-1, ARRAY_SIZE(gigasx76x_gpio_leds), gigasx76x_gpio_leds);
++ ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(gigasx76x_gpio_keys), gigasx76x_gpio_keys);
+}
+
-+MIPS_MACHINE(LANTIQ_MACH_GIGASX76X,
-+ "GIGASX76X",
-+ "GIGASX76X - Gigaset SX761,SX762,SX763",
-+ gigasx76x_init);
++MIPS_MACHINE(LANTIQ_MACH_GIGASX76X, "GIGASX76X", "GIGASX76X - Gigaset SX761,SX762,SX763", gigasx76x_init);
--- a/arch/mips/lantiq/machtypes.h
+++ b/arch/mips/lantiq/machtypes.h
-@@ -35,6 +35,9 @@
+@@ -37,6 +37,9 @@ enum lantiq_mach_type {
/* Netgear */
LANTIQ_MACH_DGN3500B, /* Netgear DGN3500 */
projects / openwrt / staging / rmilecki.git / commitdiff