}
/* Make sure we don't receive more data from the device. */
-static int bcm43xx_disable_interrupts_sync(struct bcm43xx_private *bcm, u32 *oldstate)
+static int bcm43xx_disable_interrupts_sync(struct bcm43xx_private *bcm)
{
unsigned long flags;
- u32 old;
spin_lock_irqsave(&bcm->irq_lock, flags);
if (unlikely(bcm43xx_status(bcm) != BCM43xx_STAT_INITIALIZED)) {
spin_unlock_irqrestore(&bcm->irq_lock, flags);
return -EBUSY;
}
- old = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
+ bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
spin_unlock_irqrestore(&bcm->irq_lock, flags);
bcm43xx_synchronize_irq(bcm);
- if (oldstate)
- *oldstate = old;
-
return 0;
}
u16 manufact;
u16 version;
u8 revision;
- s8 i;
if (bcm->chip_id == 0x4317) {
if (bcm->chip_rev == 0x00)
radio->version = version;
radio->revision = revision;
- /* Set default attenuation values. */
- radio->baseband_atten = bcm43xx_default_baseband_attenuation(bcm);
- radio->radio_atten = bcm43xx_default_radio_attenuation(bcm);
- radio->txctl1 = bcm43xx_default_txctl1(bcm);
- radio->txctl2 = 0xFFFF;
if (phy->type == BCM43xx_PHYTYPE_A)
radio->txpower_desired = bcm->sprom.maxpower_aphy;
else
radio->txpower_desired = bcm->sprom.maxpower_bgphy;
- /* Initialize the in-memory nrssi Lookup Table. */
- for (i = 0; i < 64; i++)
- radio->nrssi_lt[i] = i;
-
return 0;
err_unsupported_radio:
goto out;
bcm->current_core = new_core;
- bcm->current_80211_core_idx = -1;
- if (new_core->id == BCM43xx_COREID_80211)
- bcm->current_80211_core_idx = (int)(new_core - &(bcm->core_80211[0]));
-
out:
return err;
}
bcm43xx_core_disable(bcm, 0);
}
-/* Mark the current 80211 core inactive.
- * "active_80211_core" is the other 80211 core, which is used.
- */
-static int bcm43xx_wireless_core_mark_inactive(struct bcm43xx_private *bcm,
- struct bcm43xx_coreinfo *active_80211_core)
+/* Mark the current 80211 core inactive. */
+static void bcm43xx_wireless_core_mark_inactive(struct bcm43xx_private *bcm)
{
u32 sbtmstatelow;
- struct bcm43xx_coreinfo *old_core;
- int err = 0;
bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
bcm43xx_radio_turn_off(bcm);
sbtmstatelow = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW);
- sbtmstatelow &= ~0x200a0000;
- sbtmstatelow |= 0xa0000;
+ sbtmstatelow &= 0xDFF5FFFF;
+ sbtmstatelow |= 0x000A0000;
bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow);
udelay(1);
sbtmstatelow = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW);
- sbtmstatelow &= ~0xa0000;
- sbtmstatelow |= 0x80000;
+ sbtmstatelow &= 0xFFF5FFFF;
+ sbtmstatelow |= 0x00080000;
bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow);
udelay(1);
-
- if (bcm43xx_current_phy(bcm)->type == BCM43xx_PHYTYPE_G) {
- old_core = bcm->current_core;
- err = bcm43xx_switch_core(bcm, active_80211_core);
- if (err)
- goto out;
- sbtmstatelow = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW);
- sbtmstatelow &= ~0x20000000;
- sbtmstatelow |= 0x20000000;
- bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow);
- err = bcm43xx_switch_core(bcm, old_core);
- }
-
-out:
- return err;
}
static void handle_irq_transmit_status(struct bcm43xx_private *bcm)
spin_lock(&bcm->irq_lock);
- /* Only accept IRQs, if we are initialized properly.
- * This avoids an RX race while initializing.
- * We should probably not enable IRQs before we are initialized
- * completely, but some careful work is needed to fix this. I think it
- * is best to stay with this cheap workaround for now... .
- */
- if (unlikely(bcm43xx_status(bcm) != BCM43xx_STAT_INITIALIZED))
- goto out;
+ assert(bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED);
+ assert(bcm->current_core->id == BCM43xx_COREID_80211);
reason = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON);
if (reason == 0xffffffff) {
static void bcm43xx_release_firmware(struct bcm43xx_private *bcm, int force)
{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+
if (bcm->firmware_norelease && !force)
return; /* Suspending or controller reset. */
- release_firmware(bcm->ucode);
- bcm->ucode = NULL;
- release_firmware(bcm->pcm);
- bcm->pcm = NULL;
- release_firmware(bcm->initvals0);
- bcm->initvals0 = NULL;
- release_firmware(bcm->initvals1);
- bcm->initvals1 = NULL;
+ release_firmware(phy->ucode);
+ phy->ucode = NULL;
+ release_firmware(phy->pcm);
+ phy->pcm = NULL;
+ release_firmware(phy->initvals0);
+ phy->initvals0 = NULL;
+ release_firmware(phy->initvals1);
+ phy->initvals1 = NULL;
}
static int bcm43xx_request_firmware(struct bcm43xx_private *bcm)
int nr;
char buf[22 + sizeof(modparam_fwpostfix) - 1] = { 0 };
- if (!bcm->ucode) {
+ if (!phy->ucode) {
snprintf(buf, ARRAY_SIZE(buf), "bcm43xx_microcode%d%s.fw",
(rev >= 5 ? 5 : rev),
modparam_fwpostfix);
- err = request_firmware(&bcm->ucode, buf, &bcm->pci_dev->dev);
+ err = request_firmware(&phy->ucode, buf, &bcm->pci_dev->dev);
if (err) {
printk(KERN_ERR PFX
"Error: Microcode \"%s\" not available or load failed.\n",
}
}
- if (!bcm->pcm) {
+ if (!phy->pcm) {
snprintf(buf, ARRAY_SIZE(buf),
"bcm43xx_pcm%d%s.fw",
(rev < 5 ? 4 : 5),
modparam_fwpostfix);
- err = request_firmware(&bcm->pcm, buf, &bcm->pci_dev->dev);
+ err = request_firmware(&phy->pcm, buf, &bcm->pci_dev->dev);
if (err) {
printk(KERN_ERR PFX
"Error: PCM \"%s\" not available or load failed.\n",
}
}
- if (!bcm->initvals0) {
+ if (!phy->initvals0) {
if (rev == 2 || rev == 4) {
switch (phy->type) {
case BCM43xx_PHYTYPE_A:
snprintf(buf, ARRAY_SIZE(buf), "bcm43xx_initval%02d%s.fw",
nr, modparam_fwpostfix);
- err = request_firmware(&bcm->initvals0, buf, &bcm->pci_dev->dev);
+ err = request_firmware(&phy->initvals0, buf, &bcm->pci_dev->dev);
if (err) {
printk(KERN_ERR PFX
"Error: InitVals \"%s\" not available or load failed.\n",
buf);
goto error;
}
- if (bcm->initvals0->size % sizeof(struct bcm43xx_initval)) {
+ if (phy->initvals0->size % sizeof(struct bcm43xx_initval)) {
printk(KERN_ERR PFX "InitVals fileformat error.\n");
goto error;
}
}
- if (!bcm->initvals1) {
+ if (!phy->initvals1) {
if (rev >= 5) {
u32 sbtmstatehigh;
snprintf(buf, ARRAY_SIZE(buf), "bcm43xx_initval%02d%s.fw",
nr, modparam_fwpostfix);
- err = request_firmware(&bcm->initvals1, buf, &bcm->pci_dev->dev);
+ err = request_firmware(&phy->initvals1, buf, &bcm->pci_dev->dev);
if (err) {
printk(KERN_ERR PFX
"Error: InitVals \"%s\" not available or load failed.\n",
buf);
goto error;
}
- if (bcm->initvals1->size % sizeof(struct bcm43xx_initval)) {
+ if (phy->initvals1->size % sizeof(struct bcm43xx_initval)) {
printk(KERN_ERR PFX "InitVals fileformat error.\n");
goto error;
}
static void bcm43xx_upload_microcode(struct bcm43xx_private *bcm)
{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
const u32 *data;
unsigned int i, len;
/* Upload Microcode. */
- data = (u32 *)(bcm->ucode->data);
- len = bcm->ucode->size / sizeof(u32);
+ data = (u32 *)(phy->ucode->data);
+ len = phy->ucode->size / sizeof(u32);
bcm43xx_shm_control_word(bcm, BCM43xx_SHM_UCODE, 0x0000);
for (i = 0; i < len; i++) {
bcm43xx_write32(bcm, BCM43xx_MMIO_SHM_DATA,
}
/* Upload PCM data. */
- data = (u32 *)(bcm->pcm->data);
- len = bcm->pcm->size / sizeof(u32);
+ data = (u32 *)(phy->pcm->data);
+ len = phy->pcm->size / sizeof(u32);
bcm43xx_shm_control_word(bcm, BCM43xx_SHM_PCM, 0x01ea);
bcm43xx_write32(bcm, BCM43xx_MMIO_SHM_DATA, 0x00004000);
bcm43xx_shm_control_word(bcm, BCM43xx_SHM_PCM, 0x01eb);
static int bcm43xx_upload_initvals(struct bcm43xx_private *bcm)
{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
int err;
- err = bcm43xx_write_initvals(bcm, (struct bcm43xx_initval *)bcm->initvals0->data,
- bcm->initvals0->size / sizeof(struct bcm43xx_initval));
+ err = bcm43xx_write_initvals(bcm, (struct bcm43xx_initval *)phy->initvals0->data,
+ phy->initvals0->size / sizeof(struct bcm43xx_initval));
if (err)
goto out;
- if (bcm->initvals1) {
- err = bcm43xx_write_initvals(bcm, (struct bcm43xx_initval *)bcm->initvals1->data,
- bcm->initvals1->size / sizeof(struct bcm43xx_initval));
+ if (phy->initvals1) {
+ err = bcm43xx_write_initvals(bcm, (struct bcm43xx_initval *)phy->initvals1->data,
+ phy->initvals1->size / sizeof(struct bcm43xx_initval));
if (err)
goto out;
}
static int bcm43xx_initialize_irq(struct bcm43xx_private *bcm)
{
- int res;
- unsigned int i;
- u32 data;
+ int err;
bcm->irq = bcm->pci_dev->irq;
#ifdef CONFIG_BCM947XX
}
}
#endif
- res = request_irq(bcm->irq, bcm43xx_interrupt_handler,
+ err = request_irq(bcm->irq, bcm43xx_interrupt_handler,
IRQF_SHARED, KBUILD_MODNAME, bcm);
- if (res) {
+ if (err)
printk(KERN_ERR PFX "Cannot register IRQ%d\n", bcm->irq);
- return -ENODEV;
- }
- bcm43xx_write32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON, 0xffffffff);
- bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, 0x00020402);
- i = 0;
- while (1) {
- data = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON);
- if (data == BCM43xx_IRQ_READY)
- break;
- i++;
- if (i >= BCM43xx_IRQWAIT_MAX_RETRIES) {
- printk(KERN_ERR PFX "Card IRQ register not responding. "
- "Giving up.\n");
- free_irq(bcm->irq, bcm);
- return -ENODEV;
- }
- udelay(10);
- }
- // dummy read
- bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON);
- return 0;
+ return err;
}
/* Switch to the core used to write the GPIO register.
if (!modparam_noleds)
bcm43xx_leds_exit(bcm);
bcm43xx_gpio_cleanup(bcm);
- free_irq(bcm->irq, bcm);
bcm43xx_release_firmware(bcm, 0);
}
struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
int err;
- int tmp;
+ int i, tmp;
u32 value32;
u16 value16;
goto out;
bcm43xx_upload_microcode(bcm);
- err = bcm43xx_initialize_irq(bcm);
- if (err)
- goto err_release_fw;
+ bcm43xx_write32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON, 0xFFFFFFFF);
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, 0x00020402);
+ i = 0;
+ while (1) {
+ value32 = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON);
+ if (value32 == BCM43xx_IRQ_READY)
+ break;
+ i++;
+ if (i >= BCM43xx_IRQWAIT_MAX_RETRIES) {
+ printk(KERN_ERR PFX "IRQ_READY timeout\n");
+ err = -ENODEV;
+ goto err_release_fw;
+ }
+ udelay(10);
+ }
+ bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON); /* dummy read */
err = bcm43xx_gpio_init(bcm);
if (err)
- goto err_free_irq;
+ goto err_release_fw;
err = bcm43xx_upload_initvals(bcm);
if (err)
bcm43xx_radio_turn_off(bcm);
err_gpio_cleanup:
bcm43xx_gpio_cleanup(bcm);
-err_free_irq:
- free_irq(bcm->irq, bcm);
err_release_fw:
bcm43xx_release_firmware(bcm, 1);
goto out;
{
/* Initialize a "phyinfo" structure. The structure is already
* zeroed out.
+ * This is called on insmod time to initialize members.
*/
- phy->antenna_diversity = 0xFFFF;
phy->savedpctlreg = 0xFFFF;
- phy->minlowsig[0] = 0xFFFF;
- phy->minlowsig[1] = 0xFFFF;
spin_lock_init(&phy->lock);
}
{
/* Initialize a "radioinfo" structure. The structure is already
* zeroed out.
+ * This is called on insmod time to initialize members.
*/
radio->interfmode = BCM43xx_RADIO_INTERFMODE_NONE;
radio->channel = 0xFF;
radio->initial_channel = 0xFF;
- radio->lofcal = 0xFFFF;
- radio->initval = 0xFFFF;
- radio->nrssi[0] = -1000;
- radio->nrssi[1] = -1000;
}
static int bcm43xx_probe_cores(struct bcm43xx_private *bcm)
* BCM43xx_MAX_80211_CORES);
memset(&bcm->core_80211_ext, 0, sizeof(struct bcm43xx_coreinfo_80211)
* BCM43xx_MAX_80211_CORES);
- bcm->current_80211_core_idx = -1;
bcm->nr_80211_available = 0;
bcm->current_core = NULL;
bcm->active_80211_core = NULL;
goto out;
}
bcm->nr_80211_available++;
+ core->priv = ext_80211;
bcm43xx_init_struct_phyinfo(&ext_80211->phy);
bcm43xx_init_struct_radioinfo(&ext_80211->radio);
break;
}
/* http://bcm-specs.sipsolutions.net/80211Init */
-static int bcm43xx_wireless_core_init(struct bcm43xx_private *bcm)
+static int bcm43xx_wireless_core_init(struct bcm43xx_private *bcm,
+ int active_wlcore)
{
struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
if (bcm->current_core->rev >= 5)
bcm43xx_write16(bcm, 0x043C, 0x000C);
- if (bcm43xx_using_pio(bcm))
- err = bcm43xx_pio_init(bcm);
- else
- err = bcm43xx_dma_init(bcm);
- if (err)
- goto err_chip_cleanup;
+ if (active_wlcore) {
+ if (bcm43xx_using_pio(bcm))
+ err = bcm43xx_pio_init(bcm);
+ else
+ err = bcm43xx_dma_init(bcm);
+ if (err)
+ goto err_chip_cleanup;
+ }
bcm43xx_write16(bcm, 0x0612, 0x0050);
bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0416, 0x0050);
bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0414, 0x01F4);
- bcm43xx_mac_enable(bcm);
- bcm43xx_interrupt_enable(bcm, bcm->irq_savedstate);
+ if (active_wlcore) {
+ if (radio->initial_channel != 0xFF)
+ bcm43xx_radio_selectchannel(bcm, radio->initial_channel, 0);
+ }
+ /* Don't enable MAC/IRQ here, as it will race with the IRQ handler.
+ * We enable it later.
+ */
bcm->current_core->initialized = 1;
out:
return err;
return err;
}
-static void bcm43xx_softmac_init(struct bcm43xx_private *bcm)
-{
- ieee80211softmac_start(bcm->net_dev);
-}
-
static void bcm43xx_periodic_every120sec(struct bcm43xx_private *bcm)
{
struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
return err;
}
-/* This is the opposite of bcm43xx_init_board() */
-static void bcm43xx_free_board(struct bcm43xx_private *bcm)
+static int bcm43xx_shutdown_all_wireless_cores(struct bcm43xx_private *bcm)
{
+ int ret = 0;
int i, err;
+ struct bcm43xx_coreinfo *core;
- mutex_lock(&bcm->mutex);
+ bcm43xx_set_status(bcm, BCM43xx_STAT_SHUTTINGDOWN);
+ for (i = 0; i < bcm->nr_80211_available; i++) {
+ core = &(bcm->core_80211[i]);
+ assert(core->available);
+ if (!core->initialized)
+ continue;
+ err = bcm43xx_switch_core(bcm, core);
+ if (err) {
+ dprintk(KERN_ERR PFX "shutdown_all_wireless_cores "
+ "switch_core failed (%d)\n", err);
+ ret = err;
+ continue;
+ }
+ bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
+ bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON); /* dummy read */
+ bcm43xx_wireless_core_cleanup(bcm);
+ if (core == bcm->active_80211_core)
+ bcm->active_80211_core = NULL;
+ }
+ free_irq(bcm->irq, bcm);
+ bcm43xx_set_status(bcm, BCM43xx_STAT_UNINIT);
+
+ return ret;
+}
+
+/* This is the opposite of bcm43xx_init_board() */
+static void bcm43xx_free_board(struct bcm43xx_private *bcm)
+{
bcm43xx_sysfs_unregister(bcm);
bcm43xx_periodic_tasks_delete(bcm);
- bcm43xx_set_status(bcm, BCM43xx_STAT_SHUTTINGDOWN);
+ bcm43xx_lock_noirq(bcm);
+ bcm43xx_shutdown_all_wireless_cores(bcm);
+ bcm43xx_pctl_set_crystal(bcm, 0);
+ bcm43xx_unlock_noirq(bcm);
+}
- bcm43xx_rng_exit(bcm);
+static void prepare_phydata_for_init(struct bcm43xx_phyinfo *phy)
+{
+ phy->antenna_diversity = 0xFFFF;
+ memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig));
+ memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos));
+
+ /* Flags */
+ phy->calibrated = 0;
+ phy->is_locked = 0;
+
+ if (phy->_lo_pairs) {
+ memset(phy->_lo_pairs, 0,
+ sizeof(struct bcm43xx_lopair) * BCM43xx_LO_COUNT);
+ }
+ memset(phy->loopback_gain, 0, sizeof(phy->loopback_gain));
+}
+
+static void prepare_radiodata_for_init(struct bcm43xx_private *bcm,
+ struct bcm43xx_radioinfo *radio)
+{
+ int i;
+
+ /* Set default attenuation values. */
+ radio->baseband_atten = bcm43xx_default_baseband_attenuation(bcm);
+ radio->radio_atten = bcm43xx_default_radio_attenuation(bcm);
+ radio->txctl1 = bcm43xx_default_txctl1(bcm);
+ radio->txctl2 = 0xFFFF;
+ radio->txpwr_offset = 0;
+
+ /* NRSSI */
+ radio->nrssislope = 0;
+ for (i = 0; i < ARRAY_SIZE(radio->nrssi); i++)
+ radio->nrssi[i] = -1000;
+ for (i = 0; i < ARRAY_SIZE(radio->nrssi_lt); i++)
+ radio->nrssi_lt[i] = i;
+
+ radio->lofcal = 0xFFFF;
+ radio->initval = 0xFFFF;
+
+ radio->aci_enable = 0;
+ radio->aci_wlan_automatic = 0;
+ radio->aci_hw_rssi = 0;
+}
+
+static void prepare_priv_for_init(struct bcm43xx_private *bcm)
+{
+ int i;
+ struct bcm43xx_coreinfo *core;
+ struct bcm43xx_coreinfo_80211 *wlext;
+
+ assert(!bcm->active_80211_core);
+
+ bcm43xx_set_status(bcm, BCM43xx_STAT_INITIALIZING);
+
+ /* Flags */
+ bcm->was_initialized = 0;
+ bcm->reg124_set_0x4 = 0;
+
+ /* Stats */
+ memset(&bcm->stats, 0, sizeof(bcm->stats));
+
+ /* Wireless core data */
for (i = 0; i < BCM43xx_MAX_80211_CORES; i++) {
- if (!bcm->core_80211[i].available)
- continue;
- if (!bcm->core_80211[i].initialized)
+ core = &(bcm->core_80211[i]);
+ wlext = core->priv;
+
+ if (!core->available)
continue;
+ assert(wlext == &(bcm->core_80211_ext[i]));
- err = bcm43xx_switch_core(bcm, &bcm->core_80211[i]);
- assert(err == 0);
- bcm43xx_wireless_core_cleanup(bcm);
+ prepare_phydata_for_init(&wlext->phy);
+ prepare_radiodata_for_init(bcm, &wlext->radio);
}
- bcm43xx_pctl_set_crystal(bcm, 0);
+ /* IRQ related flags */
+ bcm->irq_reason = 0;
+ memset(bcm->dma_reason, 0, sizeof(bcm->dma_reason));
+ bcm->irq_savedstate = BCM43xx_IRQ_INITIAL;
- bcm43xx_set_status(bcm, BCM43xx_STAT_UNINIT);
- mutex_unlock(&bcm->mutex);
+ /* Noise calculation context */
+ memset(&bcm->noisecalc, 0, sizeof(bcm->noisecalc));
+
+ /* Periodic work context */
+ bcm->periodic_state = 0;
}
-static int bcm43xx_init_board(struct bcm43xx_private *bcm)
+static int wireless_core_up(struct bcm43xx_private *bcm,
+ int active_wlcore)
+{
+ int err;
+
+ if (!bcm43xx_core_enabled(bcm))
+ bcm43xx_wireless_core_reset(bcm, 1);
+ if (!active_wlcore)
+ bcm43xx_wireless_core_mark_inactive(bcm);
+ err = bcm43xx_wireless_core_init(bcm, active_wlcore);
+ if (err)
+ goto out;
+ if (!active_wlcore)
+ bcm43xx_radio_turn_off(bcm);
+out:
+ return err;
+}
+
+/* Select and enable the "to be used" wireless core.
+ * Locking: bcm->mutex must be aquired before calling this.
+ * bcm->irq_lock must not be aquired.
+ */
+int bcm43xx_select_wireless_core(struct bcm43xx_private *bcm,
+ int phytype)
{
int i, err;
- int connect_phy;
+ struct bcm43xx_coreinfo *active_core = NULL;
+ struct bcm43xx_coreinfo_80211 *active_wlext = NULL;
+ struct bcm43xx_coreinfo *core;
+ struct bcm43xx_coreinfo_80211 *wlext;
+ int adjust_active_sbtmstatelow = 0;
might_sleep();
- mutex_lock(&bcm->mutex);
- bcm43xx_set_status(bcm, BCM43xx_STAT_INITIALIZING);
+ if (phytype < 0) {
+ /* If no phytype is requested, select the first core. */
+ assert(bcm->core_80211[0].available);
+ wlext = bcm->core_80211[0].priv;
+ phytype = wlext->phy.type;
+ }
+ /* Find the requested core. */
+ for (i = 0; i < bcm->nr_80211_available; i++) {
+ core = &(bcm->core_80211[i]);
+ wlext = core->priv;
+ if (wlext->phy.type == phytype) {
+ active_core = core;
+ active_wlext = wlext;
+ break;
+ }
+ }
+ if (!active_core)
+ return -ESRCH; /* No such PHYTYPE on this board. */
+
+ if (bcm->active_80211_core) {
+ /* We already selected a wl core in the past.
+ * So first clean up everything.
+ */
+ dprintk(KERN_INFO PFX "select_wireless_core: cleanup\n");
+ ieee80211softmac_stop(bcm->net_dev);
+ bcm43xx_set_status(bcm, BCM43xx_STAT_INITIALIZED);
+ err = bcm43xx_disable_interrupts_sync(bcm);
+ assert(!err);
+ tasklet_enable(&bcm->isr_tasklet);
+ err = bcm43xx_shutdown_all_wireless_cores(bcm);
+ if (err)
+ goto error;
+ /* Ok, everything down, continue to re-initialize. */
+ bcm43xx_set_status(bcm, BCM43xx_STAT_INITIALIZING);
+ }
- bcm->mac_suspended = 1;
+ /* Reset all data structures. */
+ prepare_priv_for_init(bcm);
- err = bcm43xx_pctl_set_crystal(bcm, 1);
- if (err)
- goto out;
- err = bcm43xx_pctl_init(bcm);
- if (err)
- goto err_crystal_off;
err = bcm43xx_pctl_set_clock(bcm, BCM43xx_PCTL_CLK_FAST);
if (err)
- goto err_crystal_off;
+ goto error;
- tasklet_enable(&bcm->isr_tasklet);
+ /* Mark all unused cores "inactive". */
for (i = 0; i < bcm->nr_80211_available; i++) {
- err = bcm43xx_switch_core(bcm, &bcm->core_80211[i]);
- assert(err != -ENODEV);
- if (err)
- goto err_80211_unwind;
+ core = &(bcm->core_80211[i]);
+ wlext = core->priv;
- /* Enable the selected wireless core.
- * Connect PHY only on the first core.
- */
- if (!bcm43xx_core_enabled(bcm)) {
- if (bcm->nr_80211_available == 1) {
- connect_phy = bcm43xx_current_phy(bcm)->connected;
- } else {
- if (i == 0)
- connect_phy = 1;
- else
- connect_phy = 0;
- }
- bcm43xx_wireless_core_reset(bcm, connect_phy);
+ if (core == active_core)
+ continue;
+ err = bcm43xx_switch_core(bcm, core);
+ if (err) {
+ dprintk(KERN_ERR PFX "Could not switch to inactive "
+ "802.11 core (%d)\n", err);
+ goto error;
}
+ err = wireless_core_up(bcm, 0);
+ if (err) {
+ dprintk(KERN_ERR PFX "core_up for inactive 802.11 core "
+ "failed (%d)\n", err);
+ goto error;
+ }
+ adjust_active_sbtmstatelow = 1;
+ }
- if (i != 0)
- bcm43xx_wireless_core_mark_inactive(bcm, &bcm->core_80211[0]);
-
- err = bcm43xx_wireless_core_init(bcm);
- if (err)
- goto err_80211_unwind;
+ /* Now initialize the active 802.11 core. */
+ err = bcm43xx_switch_core(bcm, active_core);
+ if (err) {
+ dprintk(KERN_ERR PFX "Could not switch to active "
+ "802.11 core (%d)\n", err);
+ goto error;
+ }
+ if (adjust_active_sbtmstatelow &&
+ active_wlext->phy.type == BCM43xx_PHYTYPE_G) {
+ u32 sbtmstatelow;
- if (i != 0) {
- bcm43xx_mac_suspend(bcm);
- bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
- bcm43xx_radio_turn_off(bcm);
- }
+ sbtmstatelow = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW);
+ sbtmstatelow |= 0x20000000;
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow);
}
- bcm->active_80211_core = &bcm->core_80211[0];
- if (bcm->nr_80211_available >= 2) {
- bcm43xx_switch_core(bcm, &bcm->core_80211[0]);
- bcm43xx_mac_enable(bcm);
+ err = wireless_core_up(bcm, 1);
+ if (err) {
+ dprintk(KERN_ERR PFX "core_up for active 802.11 core "
+ "failed (%d)\n", err);
+ goto error;
}
- err = bcm43xx_rng_init(bcm);
+ err = bcm43xx_pctl_set_clock(bcm, BCM43xx_PCTL_CLK_DYNAMIC);
if (err)
- goto err_80211_unwind;
+ goto error;
+ bcm->active_80211_core = active_core;
+
bcm43xx_macfilter_clear(bcm, BCM43xx_MACFILTER_ASSOC);
bcm43xx_macfilter_set(bcm, BCM43xx_MACFILTER_SELF, (u8 *)(bcm->net_dev->dev_addr));
- dprintk(KERN_INFO PFX "80211 cores initialized\n");
bcm43xx_security_init(bcm);
- bcm43xx_softmac_init(bcm);
+ ieee80211softmac_start(bcm->net_dev);
- bcm43xx_pctl_set_clock(bcm, BCM43xx_PCTL_CLK_DYNAMIC);
+ /* Let's go! Be careful after enabling the IRQs.
+ * Don't switch cores, for example.
+ */
+ bcm43xx_mac_enable(bcm);
+ bcm43xx_set_status(bcm, BCM43xx_STAT_INITIALIZED);
+ err = bcm43xx_initialize_irq(bcm);
+ if (err)
+ goto error;
+ bcm43xx_interrupt_enable(bcm, bcm->irq_savedstate);
- if (bcm43xx_current_radio(bcm)->initial_channel != 0xFF) {
- bcm43xx_mac_suspend(bcm);
- bcm43xx_radio_selectchannel(bcm, bcm43xx_current_radio(bcm)->initial_channel, 0);
- bcm43xx_mac_enable(bcm);
- }
+ dprintk(KERN_INFO PFX "Selected 802.11 core (phytype %d)\n",
+ active_wlext->phy.type);
- /* Initialization of the board is done. Flag it as such. */
- bcm43xx_set_status(bcm, BCM43xx_STAT_INITIALIZED);
+ return 0;
+
+error:
+ bcm43xx_set_status(bcm, BCM43xx_STAT_UNINIT);
+ bcm43xx_pctl_set_clock(bcm, BCM43xx_PCTL_CLK_SLOW);
+ return err;
+}
+
+static int bcm43xx_init_board(struct bcm43xx_private *bcm)
+{
+ int err;
+
+ bcm43xx_lock_noirq(bcm);
+
+ tasklet_enable(&bcm->isr_tasklet);
+ err = bcm43xx_pctl_set_crystal(bcm, 1);
+ if (err)
+ goto err_tasklet;
+ err = bcm43xx_pctl_init(bcm);
+ if (err)
+ goto err_crystal_off;
+ err = bcm43xx_select_wireless_core(bcm, -1);
+ if (err)
+ goto err_crystal_off;
bcm43xx_periodic_tasks_setup(bcm);
- bcm43xx_sysfs_register(bcm);
- //FIXME: check for bcm43xx_sysfs_register failure. This function is a bit messy regarding unwinding, though...
+ err = bcm43xx_sysfs_register(bcm);
+ if (err)
+ goto err_wlshutdown;
/*FIXME: This should be handled by softmac instead. */
schedule_work(&bcm->softmac->associnfo.work);
- assert(err == 0);
out:
- mutex_unlock(&bcm->mutex);
+ bcm43xx_unlock_noirq(bcm);
return err;
-err_80211_unwind:
- tasklet_disable(&bcm->isr_tasklet);
- /* unwind all 80211 initialization */
- for (i = 0; i < bcm->nr_80211_available; i++) {
- if (!bcm->core_80211[i].initialized)
- continue;
- bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
- bcm43xx_wireless_core_cleanup(bcm);
- }
+err_wlshutdown:
+ bcm43xx_shutdown_all_wireless_cores(bcm);
err_crystal_off:
bcm43xx_pctl_set_crystal(bcm, 0);
+err_tasklet:
+ tasklet_disable(&bcm->isr_tasklet);
goto out;
}
unsigned long flags;
local_irq_save(flags);
- bcm43xx_interrupt_handler(bcm->irq, bcm, NULL);
+ if (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED)
+ bcm43xx_interrupt_handler(bcm->irq, bcm, NULL);
local_irq_restore(flags);
}
#endif /* CONFIG_NET_POLL_CONTROLLER */
int err;
ieee80211softmac_stop(net_dev);
- err = bcm43xx_disable_interrupts_sync(bcm, NULL);
+ err = bcm43xx_disable_interrupts_sync(bcm);
assert(!err);
bcm43xx_free_board(bcm);
bcm43xx_debugfs_remove_device(bcm);
unregister_netdev(net_dev);
bcm43xx_detach_board(bcm);
- assert(bcm->ucode == NULL);
free_ieee80211softmac(net_dev);
}
static void bcm43xx_chip_reset(void *_bcm)
{
struct bcm43xx_private *bcm = _bcm;
- struct net_device *net_dev = bcm->net_dev;
- struct pci_dev *pci_dev = bcm->pci_dev;
+ struct bcm43xx_phyinfo *phy;
int err;
- int was_initialized = (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED);
- netif_stop_queue(bcm->net_dev);
- tasklet_disable(&bcm->isr_tasklet);
+ bcm43xx_lock_noirq(bcm);
+ phy = bcm43xx_current_phy(bcm);
+ err = bcm43xx_select_wireless_core(bcm, phy->type);
+ bcm43xx_unlock_noirq(bcm);
- bcm->firmware_norelease = 1;
- if (was_initialized)
- bcm43xx_free_board(bcm);
- bcm->firmware_norelease = 0;
- bcm43xx_detach_board(bcm);
- err = bcm43xx_init_private(bcm, net_dev, pci_dev);
- if (err)
- goto failure;
- err = bcm43xx_attach_board(bcm);
- if (err)
- goto failure;
- if (was_initialized) {
- err = bcm43xx_init_board(bcm);
- if (err)
- goto failure;
- }
- netif_wake_queue(bcm->net_dev);
- printk(KERN_INFO PFX "Controller restarted\n");
-
- return;
-failure:
- printk(KERN_ERR PFX "Controller restart failed\n");
+ printk(KERN_ERR PFX "Controller restart%s\n",
+ (err == 0) ? "ed" : " failed");
}
/* Hard-reset the chip.
* This can be called from interrupt or process context.
- * Make sure to _not_ re-enable device interrupts after this has been called.
-*/
+ */
void bcm43xx_controller_restart(struct bcm43xx_private *bcm, const char *reason)
{
+ assert(bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED);
bcm43xx_set_status(bcm, BCM43xx_STAT_RESTARTING);
- bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
- bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD); /* dummy read */
printk(KERN_ERR PFX "Controller RESET (%s) ...\n", reason);
INIT_WORK(&bcm->restart_work, bcm43xx_chip_reset, bcm);
schedule_work(&bcm->restart_work);
{
struct net_device *net_dev = pci_get_drvdata(pdev);
struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
- int try_to_shutdown = 0, err;
+ int err;
dprintk(KERN_INFO PFX "Suspending...\n");
- bcm->was_initialized = (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED);
- if (bcm->was_initialized)
- try_to_shutdown = 1;
-
netif_device_detach(net_dev);
- if (try_to_shutdown) {
+ bcm->was_initialized = 0;
+ if (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED) {
+ bcm->was_initialized = 1;
ieee80211softmac_stop(net_dev);
- err = bcm43xx_disable_interrupts_sync(bcm, &bcm->irq_savedstate);
+ err = bcm43xx_disable_interrupts_sync(bcm);
if (unlikely(err)) {
dprintk(KERN_ERR PFX "Suspend failed.\n");
return -EAGAIN;
pci_restore_state(pdev);
bcm43xx_chipset_attach(bcm);
- if (bcm->was_initialized) {
- bcm->irq_savedstate = BCM43xx_IRQ_INITIAL;
+ if (bcm->was_initialized)
err = bcm43xx_init_board(bcm);
- }
if (err) {
printk(KERN_ERR PFX "Resume failed!\n");
return err;
}
-
netif_device_attach(net_dev);
-
+
dprintk(KERN_INFO PFX "Device resumed.\n");
return 0;
projects / openwrt / staging / blogic.git / commitdiff