This is an automatically generated commit which aids following Kernel patch history,
as git will see the move and copy as a rename thus defeating the purpose.
See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
for the original discussion.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
--- /dev/null
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_MMAP_RND_BITS=8
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_VIRT=y
+CONFIG_ARM=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_HEAVY_MB=y
+# CONFIG_ARM_HIGHBANK_CPUIDLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_ARM_LPAE=y
+CONFIG_ARM_PATCH_IDIV=y
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_PSCI=y
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
+CONFIG_CACHE_L2X0=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_SPECTRE=y
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+CONFIG_DMA_OPS=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_VDSO_32=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_HAVE_SMP=y
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_NEON=y
+CONFIG_NR_CPUS=4
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_RTC_MC146818_LIB=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SWP_EMULATE=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_UNWINDER_ARM=y
+CONFIG_USE_OF=y
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0
--- /dev/null
+CONFIG_64BIT=y
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_HMAT=y
+CONFIG_ACPI_PCC=y
+CONFIG_AHCI_IMX=y
+CONFIG_AHCI_MVEBU=y
+CONFIG_AHCI_QORIQ=y
+CONFIG_AMPERE_ERRATUM_AC03_CPU_38=y
+CONFIG_ARCH_BCM=y
+CONFIG_ARCH_BCM2835=y
+# CONFIG_ARCH_BCMBCA is not set
+CONFIG_ARCH_BCM_IPROC=y
+CONFIG_ARCH_BRCMSTB=y
+CONFIG_ARCH_HISI=y
+CONFIG_ARCH_INTEL_SOCFPGA=y
+CONFIG_ARCH_LAYERSCAPE=y
+CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=24
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_MXC=y
+CONFIG_ARCH_NXP=y
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ARCH_R8A774A1=y
+CONFIG_ARCH_R8A774B1=y
+CONFIG_ARCH_R8A774C0=y
+CONFIG_ARCH_R8A774E1=y
+# CONFIG_ARCH_R8A77950 is not set
+# CONFIG_ARCH_R8A77951 is not set
+# CONFIG_ARCH_R8A77960 is not set
+# CONFIG_ARCH_R8A77961 is not set
+# CONFIG_ARCH_R8A77965 is not set
+# CONFIG_ARCH_R8A77970 is not set
+# CONFIG_ARCH_R8A77980 is not set
+# CONFIG_ARCH_R8A77990 is not set
+# CONFIG_ARCH_R8A77995 is not set
+# CONFIG_ARCH_R8A779A0 is not set
+# CONFIG_ARCH_R8A779F0 is not set
+# CONFIG_ARCH_R8A779G0 is not set
+CONFIG_ARCH_R9A07G043=y
+CONFIG_ARCH_R9A07G044=y
+CONFIG_ARCH_R9A07G054=y
+CONFIG_ARCH_R9A09G011=y
+CONFIG_ARCH_RENESAS=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ARCH_STACKWALK=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_SYNQUACER=y
+CONFIG_ARCH_THUNDER=y
+CONFIG_ARCH_THUNDER2=y
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_ARCH_WANTS_NO_INSTR=y
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_ARM64=y
+CONFIG_ARM64_4K_PAGES=y
+CONFIG_ARM64_AMU_EXTN=y
+CONFIG_ARM64_BTI=y
+CONFIG_ARM64_CNP=y
+CONFIG_ARM64_CRYPTO=y
+CONFIG_ARM64_E0PD=y
+CONFIG_ARM64_EPAN=y
+CONFIG_ARM64_ERRATUM_1024718=y
+CONFIG_ARM64_ERRATUM_1165522=y
+CONFIG_ARM64_ERRATUM_1286807=y
+CONFIG_ARM64_ERRATUM_1319367=y
+CONFIG_ARM64_ERRATUM_1418040=y
+CONFIG_ARM64_ERRATUM_1463225=y
+CONFIG_ARM64_ERRATUM_1508412=y
+CONFIG_ARM64_ERRATUM_1530923=y
+CONFIG_ARM64_ERRATUM_1542419=y
+CONFIG_ARM64_ERRATUM_1742098=y
+CONFIG_ARM64_ERRATUM_2051678=y
+CONFIG_ARM64_ERRATUM_2054223=y
+CONFIG_ARM64_ERRATUM_2067961=y
+CONFIG_ARM64_ERRATUM_2077057=y
+CONFIG_ARM64_ERRATUM_2441007=y
+CONFIG_ARM64_ERRATUM_2441009=y
+CONFIG_ARM64_ERRATUM_2457168=y
+CONFIG_ARM64_ERRATUM_2658417=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_826319=y
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_834220=y
+CONFIG_ARM64_ERRATUM_843419=y
+CONFIG_ARM64_ERRATUM_845719=y
+CONFIG_ARM64_HW_AFDBM=y
+CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
+CONFIG_ARM64_MTE=y
+CONFIG_ARM64_PAGE_SHIFT=12
+CONFIG_ARM64_PAN=y
+CONFIG_ARM64_PA_BITS=48
+CONFIG_ARM64_PA_BITS_48=y
+CONFIG_ARM64_PTR_AUTH=y
+CONFIG_ARM64_PTR_AUTH_KERNEL=y
+CONFIG_ARM64_RAS_EXTN=y
+CONFIG_ARM64_SME=y
+CONFIG_ARM64_SVE=y
+CONFIG_ARM64_TAGGED_ADDR_ABI=y
+CONFIG_ARM64_TLB_RANGE=y
+CONFIG_ARM64_VA_BITS=48
+CONFIG_ARM64_VA_BITS_48=y
+CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
+CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
+CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
+CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE=y
+# CONFIG_ARMADA_37XX_RWTM_MBOX is not set
+CONFIG_ARMADA_37XX_WATCHDOG=y
+CONFIG_ARMADA_THERMAL=y
+CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
+# CONFIG_ARM_DMC620_PMU is not set
+# CONFIG_ARM_MHU_V2 is not set
+CONFIG_ARM_PSCI_CPUIDLE=y
+CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y
+CONFIG_ARM_SBSA_WATCHDOG=y
+CONFIG_ARM_SCPI_POWER_DOMAIN=y
+CONFIG_ARM_SCPI_PROTOCOL=y
+CONFIG_ARM_SMCCC_SOC_ID=y
+CONFIG_ARM_SMC_WATCHDOG=y
+CONFIG_ARM_SMMU=y
+# CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT is not set
+# CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS is not set
+CONFIG_ARM_SMMU_V3=y
+# CONFIG_ARM_SMMU_V3_PMU is not set
+# CONFIG_ARM_SMMU_V3_SVA is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+# CONFIG_AXI_DMAC is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BCM2711_THERMAL is not set
+CONFIG_BCM2835_MBOX=y
+CONFIG_BCM2835_POWER=y
+# CONFIG_BCM2835_THERMAL is not set
+# CONFIG_BCM2835_VCHIQ is not set
+CONFIG_BCM2835_WDT=y
+# CONFIG_BCMGENET is not set
+# CONFIG_BCM_CYGNUS_PHY is not set
+# CONFIG_BCM_FLEXRM_MBOX is not set
+# CONFIG_BCM_NS_THERMAL is not set
+# CONFIG_BCM_PDC_MBOX is not set
+# CONFIG_BCM_SR_THERMAL is not set
+CONFIG_BCM_VIDEOCORE=y
+# CONFIG_BGMAC_PLATFORM is not set
+CONFIG_BLK_PM=y
+# CONFIG_BRCMSTB_PM is not set
+# CONFIG_BRCMSTB_THERMAL is not set
+CONFIG_BRCM_USB_PINMAP=y
+CONFIG_CAVIUM_ERRATUM_22375=y
+CONFIG_CAVIUM_ERRATUM_23144=y
+CONFIG_CAVIUM_ERRATUM_23154=y
+CONFIG_CAVIUM_ERRATUM_27456=y
+CONFIG_CAVIUM_ERRATUM_30115=y
+CONFIG_CAVIUM_TX2_ERRATUM_219=y
+CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
+CONFIG_CLK_BCM2711_DVP=y
+CONFIG_CLK_BCM2835=y
+CONFIG_CLK_BCM_NS2=y
+CONFIG_CLK_BCM_SR=y
+CONFIG_CLK_IMX8MM=y
+CONFIG_CLK_IMX8MN=y
+CONFIG_CLK_IMX8MP=y
+CONFIG_CLK_IMX8MQ=y
+CONFIG_CLK_IMX8QXP=y
+CONFIG_CLK_IMX8ULP=y
+CONFIG_CLK_IMX93=y
+CONFIG_CLK_INTEL_SOCFPGA=y
+CONFIG_CLK_INTEL_SOCFPGA64=y
+CONFIG_CLK_LS1028A_PLLDIG=y
+CONFIG_CLK_PX30=y
+CONFIG_CLK_QORIQ=y
+CONFIG_CLK_RASPBERRYPI=y
+CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y
+CONFIG_CLK_RENESAS=y
+CONFIG_CLK_RK3308=y
+CONFIG_CLK_RK3328=y
+CONFIG_CLK_RK3368=y
+CONFIG_CLK_RK3399=y
+CONFIG_CLK_RK3568=y
+CONFIG_CLK_SP810=y
+CONFIG_CLK_SUNXI=y
+CONFIG_CLK_SUNXI_CLOCKS=y
+# CONFIG_CLK_SUNXI_PRCM_SUN6I is not set
+# CONFIG_CLK_SUNXI_PRCM_SUN8I is not set
+# CONFIG_CLK_SUNXI_PRCM_SUN9I is not set
+CONFIG_CLK_VEXPRESS_OSC=y
+CONFIG_CMA=y
+CONFIG_CMA_ALIGNMENT=8
+CONFIG_CMA_AREAS=19
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_SIZE_MBYTES=32
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+# CONFIG_CMA_SYSFS is not set
+# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
+# CONFIG_COMMON_CLK_FSL_SAI is not set
+CONFIG_COMMON_CLK_HI3516CV300=y
+CONFIG_COMMON_CLK_HI3519=y
+CONFIG_COMMON_CLK_HI3559A=y
+CONFIG_COMMON_CLK_HI3660=y
+CONFIG_COMMON_CLK_HI3670=y
+CONFIG_COMMON_CLK_HI3798CV200=y
+CONFIG_COMMON_CLK_HI6220=y
+CONFIG_COMMON_CLK_HI655X=y
+CONFIG_COMMON_CLK_ROCKCHIP=y
+CONFIG_COMMON_CLK_SCPI=y
+CONFIG_COMMON_CLK_ZYNQMP=y
+CONFIG_COMMON_RESET_HI3660=y
+CONFIG_COMMON_RESET_HI6220=y
+# CONFIG_COMPAT_32BIT_TIME is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_PM=y
+CONFIG_CRYPTO_AES_ARM64=y
+CONFIG_CRYPTO_AES_ARM64_BS=y
+CONFIG_CRYPTO_AES_ARM64_CE=y
+CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
+CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y
+CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=y
+CONFIG_CRYPTO_CHACHA20=y
+CONFIG_CRYPTO_CHACHA20_NEON=y
+CONFIG_CRYPTO_CRYPTD=y
+# CONFIG_CRYPTO_DEV_ALLWINNER is not set
+# CONFIG_CRYPTO_DEV_BCM_SPU is not set
+# CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM is not set
+# CONFIG_CRYPTO_DEV_HISI_HPRE is not set
+# CONFIG_CRYPTO_DEV_HISI_SEC2 is not set
+# CONFIG_CRYPTO_DEV_HISI_TRNG is not set
+# CONFIG_CRYPTO_DEV_OCTEONTX2_CPT is not set
+# CONFIG_CRYPTO_DEV_ROCKCHIP is not set
+# CONFIG_CRYPTO_DEV_ZYNQMP_AES is not set
+# CONFIG_CRYPTO_DEV_ZYNQMP_SHA3 is not set
+CONFIG_CRYPTO_GHASH_ARM64_CE=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
+CONFIG_CRYPTO_POLYVAL_ARM64_CE=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_ARM64_CE=y
+CONFIG_CRYPTO_SHA256_ARM64=y
+CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_SHA512_ARM64=y
+CONFIG_CRYPTO_SIMD=y
+# CONFIG_CRYPTO_SM4_ARM64_CE_BLK is not set
+# CONFIG_CRYPTO_SM4_ARM64_NEON_BLK is not set
+# CONFIG_DEV_DAX_HMEM is not set
+CONFIG_DMA_BCM2835=y
+CONFIG_DMA_CMA=y
+CONFIG_DMA_DIRECT_REMAP=y
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_DMA_SUN6I=y
+CONFIG_DRM=y
+CONFIG_DRM_BOCHS=y
+CONFIG_DRM_BRIDGE=y
+# CONFIG_DRM_FSL_LDB is not set
+CONFIG_DRM_GEM_SHMEM_HELPER=y
+# CONFIG_DRM_IMX8QM_LDB is not set
+# CONFIG_DRM_IMX8QXP_LDB is not set
+# CONFIG_DRM_IMX8QXP_PIXEL_COMBINER is not set
+# CONFIG_DRM_IMX8QXP_PIXEL_LINK is not set
+# CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI is not set
+# CONFIG_DRM_IMX_DCSS is not set
+CONFIG_DRM_KMS_HELPER=y
+CONFIG_DRM_PANEL=y
+CONFIG_DRM_PANEL_BRIDGE=y
+CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
+CONFIG_DRM_QXL=y
+# CONFIG_DRM_RCAR_DU is not set
+# CONFIG_DRM_ROCKCHIP is not set
+CONFIG_DRM_TTM=y
+CONFIG_DRM_TTM_HELPER=y
+# CONFIG_DRM_V3D is not set
+CONFIG_DRM_VIRTIO_GPU=y
+CONFIG_DRM_VRAM_HELPER=y
+# CONFIG_DWMAC_SUN8I is not set
+# CONFIG_DWMAC_SUNXI is not set
+CONFIG_DW_WATCHDOG=y
+CONFIG_EFI_CAPSULE_LOADER=y
+CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
+CONFIG_EFI_SOFT_RESERVE=y
+CONFIG_EFI_VARS_PSTORE=y
+# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_CMDLINE=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_MX3=y
+# CONFIG_FB_SH_MOBILE_LCDC is not set
+# CONFIG_FB_XILINX is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FSL_DPAA is not set
+# CONFIG_FSL_DPAA2_QDMA is not set
+CONFIG_FSL_ERRATUM_A008585=y
+# CONFIG_FSL_IMX8_DDR_PMU is not set
+# CONFIG_FSL_PQ_MDIO is not set
+CONFIG_FUJITSU_ERRATUM_010001=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+# CONFIG_GIANFAR is not set
+CONFIG_GPIO_BCM_XGS_IPROC=y
+CONFIG_GPIO_BRCMSTB=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_MPC8XXX=y
+CONFIG_GPIO_MXC=y
+CONFIG_GPIO_RASPBERRYPI_EXP=y
+CONFIG_GPIO_ROCKCHIP=y
+CONFIG_GPIO_THUNDERX=y
+CONFIG_GPIO_XLP=y
+CONFIG_GPIO_ZYNQ=y
+CONFIG_GPIO_ZYNQMP_MODEPIN=y
+CONFIG_HDMI=y
+CONFIG_HI3660_MBOX=y
+CONFIG_HI6220_MBOX=y
+CONFIG_HISILICON_ERRATUM_161600802=y
+CONFIG_HISILICON_LPC=y
+CONFIG_HISI_PMU=y
+CONFIG_HISI_THERMAL=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_ACPI=y
+# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_PCIE is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_ARM_SMCCC_TRNG=y
+# CONFIG_HW_RANDOM_HISI is not set
+CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_ALTERA=y
+# CONFIG_I2C_BCM2835 is not set
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_HIX5HD2 is not set
+CONFIG_I2C_IMX=y
+CONFIG_I2C_IMX_LPI2C=y
+CONFIG_I2C_RIIC=y
+# CONFIG_I2C_RZV2M is not set
+# CONFIG_I2C_SLAVE_TESTUNIT is not set
+CONFIG_I2C_SYNQUACER=y
+CONFIG_I2C_THUNDERX=y
+# CONFIG_I2C_XLP9XX is not set
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+# CONFIG_IMX2_WDT is not set
+# CONFIG_IMX8MM_THERMAL is not set
+# CONFIG_IMX8QXP_ADC is not set
+# CONFIG_IMX_DMA is not set
+# CONFIG_IMX_DSP is not set
+CONFIG_IMX_INTMUX=y
+CONFIG_IMX_IRQSTEER=y
+CONFIG_IMX_MBOX=y
+# CONFIG_IMX_MU_MSI is not set
+CONFIG_IMX_SCU=y
+CONFIG_IMX_SCU_PD=y
+# CONFIG_IMX_SC_THERMAL is not set
+# CONFIG_IMX_SC_WDT is not set
+# CONFIG_IMX_SDMA is not set
+# CONFIG_IMX_WEIM is not set
+# CONFIG_INPUT_HISI_POWERKEY is not set
+# CONFIG_INPUT_IBM_PANEL is not set
+# CONFIG_INTEL_STRATIX10_RSU is not set
+# CONFIG_INTEL_STRATIX10_SERVICE is not set
+CONFIG_INTERCONNECT=y
+CONFIG_INTERCONNECT_IMX=y
+CONFIG_INTERCONNECT_IMX8MM=y
+CONFIG_INTERCONNECT_IMX8MN=y
+CONFIG_INTERCONNECT_IMX8MP=y
+CONFIG_INTERCONNECT_IMX8MQ=y
+# CONFIG_IOMMU_DEBUGFS is not set
+# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
+CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
+CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+# CONFIG_IOMMU_IO_PGTABLE_DART is not set
+# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
+CONFIG_IOMMU_SUPPORT=y
+# CONFIG_IPMMU_VMSA is not set
+# CONFIG_K3_DMA is not set
+CONFIG_KCMP=y
+# CONFIG_KEYBOARD_IMX_SC_KEY is not set
+# CONFIG_KEYBOARD_SUN4I_LRADC is not set
+CONFIG_KSM=y
+CONFIG_KVM=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_MAILBOX_TEST is not set
+CONFIG_MARVELL_10G_PHY=y
+# CONFIG_MARVELL_CN10K_DDR_PMU is not set
+# CONFIG_MARVELL_CN10K_TAD_PMU is not set
+CONFIG_MDIO_BCM_IPROC=y
+CONFIG_MDIO_BUS_MUX_BCM_IPROC=y
+CONFIG_MDIO_SUN4I=y
+# CONFIG_MFD_ALTERA_A10SR is not set
+CONFIG_MFD_ALTERA_SYSMGR=y
+# CONFIG_MFD_AXP20X_RSB is not set
+CONFIG_MFD_CORE=y
+CONFIG_MFD_HI655X_PMIC=y
+# CONFIG_MFD_KHADAS_MCU is not set
+CONFIG_MFD_SUN4I_GPADC=y
+# CONFIG_MFD_SUN6I_PRCM is not set
+CONFIG_MFD_SYSCON=y
+CONFIG_MFD_VEXPRESS_SYSREG=y
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_BCM2835=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_CAVIUM_THUNDERX=y
+CONFIG_MMC_DW=y
+# CONFIG_MMC_DW_BLUEFIELD is not set
+# CONFIG_MMC_DW_EXYNOS is not set
+# CONFIG_MMC_DW_HI3798CV200 is not set
+# CONFIG_MMC_DW_K3 is not set
+# CONFIG_MMC_DW_PCI is not set
+CONFIG_MMC_DW_PLTFM=y
+CONFIG_MMC_DW_ROCKCHIP=y
+# CONFIG_MMC_MXC is not set
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MMC_SDHCI_CADENCE=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_MMC_SDHCI_IPROC=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
+CONFIG_MMC_SDHCI_PCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHI=y
+CONFIG_MMC_SDHI_INTERNAL_DMAC=y
+# CONFIG_MMC_SDHI_SYS_DMAC is not set
+# CONFIG_MMC_SH_MMCIF is not set
+CONFIG_MMC_SUNXI=y
+CONFIG_MODULES_USE_ELF_RELA=y
+# CONFIG_MVNETA is not set
+# CONFIG_MVPP2 is not set
+# CONFIG_MV_XOR is not set
+# CONFIG_MX3_IPU is not set
+CONFIG_MXC_CLK=y
+CONFIG_MXC_CLK_SCU=y
+# CONFIG_MXS_DMA is not set
+CONFIG_NEED_SG_DMA_LENGTH=y
+# CONFIG_NET_VENDOR_ALLWINNER is not set
+CONFIG_NODES_SHIFT=4
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_NO_HZ=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=256
+CONFIG_NUMA=y
+CONFIG_NUMA_BALANCING=y
+CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
+# CONFIG_NVHE_EL2_DEBUG is not set
+CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y
+# CONFIG_NVMEM_IMX_IIM is not set
+# CONFIG_NVMEM_IMX_OCOTP_ELE is not set
+CONFIG_NVMEM_IMX_OCOTP_SCU=y
+# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
+CONFIG_NVMEM_ROCKCHIP_EFUSE=y
+# CONFIG_NVMEM_ROCKCHIP_OTP is not set
+# CONFIG_NVMEM_SNVS_LPGPR is not set
+# CONFIG_NVMEM_SUNXI_SID is not set
+# CONFIG_NVMEM_ZYNQMP is not set
+CONFIG_PCC=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEASPM=y
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_ARMADA_8K=y
+CONFIG_PCIE_BRCMSTB=y
+CONFIG_PCIE_HISI_STB=y
+CONFIG_PCIE_IPROC_MSI=y
+CONFIG_PCIE_IPROC_PLATFORM=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_PCIE_MOBIVEIL_PLAT=y
+# CONFIG_PCIE_RCAR_EP is not set
+CONFIG_PCIE_RCAR_HOST=y
+CONFIG_PCIE_ROCKCHIP=y
+# CONFIG_PCIE_ROCKCHIP_DW_HOST is not set
+CONFIG_PCIE_ROCKCHIP_HOST=y
+CONFIG_PCIE_XILINX_CPM=y
+CONFIG_PCIE_XILINX_NWL=y
+CONFIG_PCI_AARDVARK=y
+CONFIG_PCI_HISI=y
+CONFIG_PCI_HOST_THUNDER_ECAM=y
+CONFIG_PCI_HOST_THUNDER_PEM=y
+CONFIG_PCI_IMX6=y
+CONFIG_PCI_IOV=y
+CONFIG_PCI_LAYERSCAPE=y
+CONFIG_PCI_PASID=y
+# CONFIG_PCI_RCAR_GEN2 is not set
+CONFIG_PHY_BCM_SR_PCIE=y
+CONFIG_PHY_BCM_SR_USB=y
+CONFIG_PHY_BRCM_SATA=y
+CONFIG_PHY_BRCM_USB=y
+CONFIG_PHY_FSL_IMX8M_PCIE=y
+# CONFIG_PHY_FSL_LYNX_28G is not set
+CONFIG_PHY_HI3660_USB=y
+CONFIG_PHY_HI3670_PCIE=y
+CONFIG_PHY_HI3670_USB=y
+CONFIG_PHY_HI6220_USB=y
+CONFIG_PHY_HISI_INNO_USB2=y
+# CONFIG_PHY_HISTB_COMBPHY is not set
+# CONFIG_PHY_MIXEL_LVDS_PHY is not set
+CONFIG_PHY_MVEBU_A3700_COMPHY=y
+CONFIG_PHY_MVEBU_A3700_UTMI=y
+CONFIG_PHY_MVEBU_A38X_COMPHY=y
+CONFIG_PHY_MVEBU_CP110_COMPHY=y
+CONFIG_PHY_NS2_PCIE=y
+CONFIG_PHY_NS2_USB_DRD=y
+# CONFIG_PHY_RCAR_GEN2 is not set
+CONFIG_PHY_RCAR_GEN3_PCIE=y
+CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_PHY_RCAR_GEN3_USB3=y
+# CONFIG_PHY_ROCKCHIP_DP is not set
+# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
+CONFIG_PHY_ROCKCHIP_EMMC=y
+# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
+# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
+# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+# CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY is not set
+CONFIG_PHY_ROCKCHIP_PCIE=y
+CONFIG_PHY_ROCKCHIP_SNPS_PCIE3=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
+# CONFIG_PHY_ROCKCHIP_USB is not set
+CONFIG_PHY_SUN4I_USB=y
+CONFIG_PHY_SUN50I_USB3=y
+# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
+CONFIG_PHY_SUN9I_USB=y
+# CONFIG_PHY_XILINX_ZYNQMP is not set
+CONFIG_PINCTRL_IMX=y
+CONFIG_PINCTRL_IMX8DXL=y
+CONFIG_PINCTRL_IMX8MM=y
+CONFIG_PINCTRL_IMX8MN=y
+CONFIG_PINCTRL_IMX8MP=y
+CONFIG_PINCTRL_IMX8MQ=y
+CONFIG_PINCTRL_IMX8QM=y
+CONFIG_PINCTRL_IMX8QXP=y
+CONFIG_PINCTRL_IMX8ULP=y
+CONFIG_PINCTRL_IMX93=y
+# CONFIG_PINCTRL_IMXRT1050 is not set
+# CONFIG_PINCTRL_IMXRT1170 is not set
+CONFIG_PINCTRL_IMX_SCU=y
+CONFIG_PINCTRL_IPROC_GPIO=y
+CONFIG_PINCTRL_NS2_MUX=y
+CONFIG_PINCTRL_ROCKCHIP=y
+# CONFIG_PINCTRL_SUN20I_D1 is not set
+CONFIG_PINCTRL_SUN4I_A10=y
+CONFIG_PINCTRL_SUN50I_A100=y
+CONFIG_PINCTRL_SUN50I_A100_R=y
+CONFIG_PINCTRL_SUN50I_A64=y
+CONFIG_PINCTRL_SUN50I_A64_R=y
+CONFIG_PINCTRL_SUN50I_H5=y
+CONFIG_PINCTRL_SUN50I_H6=y
+CONFIG_PINCTRL_SUN50I_H616=y
+CONFIG_PINCTRL_SUN50I_H616_R=y
+CONFIG_PINCTRL_SUN50I_H6_R=y
+CONFIG_PINCTRL_SUN5I=y
+# CONFIG_PINCTRL_SUN6I_A31 is not set
+# CONFIG_PINCTRL_SUN6I_A31_R is not set
+# CONFIG_PINCTRL_SUN8I_A23 is not set
+# CONFIG_PINCTRL_SUN8I_A23_R is not set
+# CONFIG_PINCTRL_SUN8I_A33 is not set
+# CONFIG_PINCTRL_SUN8I_A83T is not set
+# CONFIG_PINCTRL_SUN8I_A83T_R is not set
+# CONFIG_PINCTRL_SUN8I_H3 is not set
+# CONFIG_PINCTRL_SUN8I_H3_R is not set
+# CONFIG_PINCTRL_SUN8I_V3S is not set
+# CONFIG_PINCTRL_SUN9I_A80 is not set
+# CONFIG_PINCTRL_SUN9I_A80_R is not set
+CONFIG_PINCTRL_ZYNQMP=y
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+CONFIG_PM_GENERIC_DOMAINS=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_HISI=y
+CONFIG_POWER_RESET_VEXPRESS=y
+CONFIG_POWER_SUPPLY=y
+# CONFIG_PTP_1588_CLOCK_DTE is not set
+# CONFIG_PWM_BCM2835 is not set
+CONFIG_QCOM_FALKOR_ERRATUM_1003=y
+CONFIG_QCOM_FALKOR_ERRATUM_1009=y
+CONFIG_QCOM_FALKOR_ERRATUM_E1041=y
+CONFIG_QCOM_QDF2400_ERRATUM_0065=y
+CONFIG_QORIQ_THERMAL=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_RANDOMIZE_BASE=y
+CONFIG_RANDOMIZE_MODULE_REGION_FULL=y
+CONFIG_RANDSTRUCT_NONE=y
+CONFIG_RELOCATABLE=y
+# CONFIG_RAVB is not set
+CONFIG_RCAR_DMAC=y
+# CONFIG_RCAR_GEN3_THERMAL is not set
+# CONFIG_RCAR_THERMAL is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_ANATOP=y
+CONFIG_REGULATOR_AXP20X=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_HI655X=y
+CONFIG_REGULATOR_PFUZE100=y
+# CONFIG_REGULATOR_VEXPRESS is not set
+CONFIG_RENESAS_OSTM=y
+# CONFIG_RENESAS_RZAWDT is not set
+# CONFIG_RENESAS_RZG2LWDT is not set
+# CONFIG_RENESAS_RZN1WDT is not set
+CONFIG_RENESAS_USB_DMAC=y
+# CONFIG_RENESAS_WDT is not set
+# CONFIG_RESET_BRCMSTB is not set
+CONFIG_RESET_IMX7=y
+# CONFIG_RESET_RASPBERRYPI is not set
+CONFIG_RESET_RZG2L_USBPHY_CTRL=y
+CONFIG_ROCKCHIP_IODOMAIN=y
+CONFIG_ROCKCHIP_IOMMU=y
+# CONFIG_ROCKCHIP_MBOX is not set
+CONFIG_ROCKCHIP_PM_DOMAINS=y
+# CONFIG_ROCKCHIP_SARADC is not set
+# CONFIG_ROCKCHIP_THERMAL is not set
+CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
+# CONFIG_RTC_DRV_BRCMSTB is not set
+# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
+# CONFIG_RTC_DRV_IMXDI is not set
+# CONFIG_RTC_DRV_IMX_SC is not set
+CONFIG_RTC_DRV_MV=y
+# CONFIG_RTC_DRV_MXC is not set
+# CONFIG_RTC_DRV_MXC_V2 is not set
+# CONFIG_RTC_DRV_SH is not set
+CONFIG_RTC_I2C_AND_SPI=y
+# CONFIG_RZG2L_ADC is not set
+# CONFIG_RZG2L_THERMAL is not set
+CONFIG_RZ_DMAC=y
+CONFIG_SATA_SIL24=y
+# CONFIG_SCHED_CORE is not set
+CONFIG_SCHED_MC=y
+CONFIG_SCHED_SMT=y
+# CONFIG_SENSORS_ARM_SCPI is not set
+CONFIG_SERIAL_8250_BCM2835AUX=y
+CONFIG_SERIAL_8250_BCM7271=y
+# CONFIG_SERIAL_8250_EXAR is not set
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_FSL_LINFLEXUART=y
+CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_IMX_EARLYCON=y
+CONFIG_SERIAL_MVEBU_CONSOLE=y
+CONFIG_SERIAL_MVEBU_UART=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+# CONFIG_SMC91X is not set
+# CONFIG_SND_SOC_RCAR is not set
+# CONFIG_SND_SOC_RZ is not set
+# CONFIG_SND_SOC_SH4_FSI is not set
+# CONFIG_SND_SUN4I_I2S is not set
+# CONFIG_SND_SUN50I_CODEC_ANALOG is not set
+# CONFIG_SND_SUN50I_DMIC is not set
+# CONFIG_SND_SUN8I_CODEC is not set
+# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
+# CONFIG_SNI_NETSEC is not set
+CONFIG_SOCIONEXT_SYNQUACER_PREITS=y
+CONFIG_SOC_IMX8M=y
+CONFIG_SOC_IMX9=y
+CONFIG_SPARSEMEM=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPI_ARMADA_3700=y
+# CONFIG_SPI_BCM2835 is not set
+CONFIG_SPI_FSL_LPSPI=y
+# CONFIG_SPI_FSL_QUADSPI is not set
+# CONFIG_SPI_HISI_KUNPENG is not set
+# CONFIG_SPI_HISI_SFC is not set
+# CONFIG_SPI_HISI_SFC_V3XX is not set
+CONFIG_SPI_IMX=y
+# CONFIG_SPI_ROCKCHIP_SFC is not set
+# CONFIG_SPI_RSPI is not set
+# CONFIG_SPI_SH_HSPI is not set
+# CONFIG_SPI_SH_MSIOF is not set
+# CONFIG_SPI_SUN4I is not set
+# CONFIG_SPI_SUN6I is not set
+# CONFIG_SPI_SYNQUACER is not set
+CONFIG_SPI_THUNDERX=y
+# CONFIG_SPI_XLP is not set
+CONFIG_STUB_CLK_HI3660=y
+CONFIG_STUB_CLK_HI6220=y
+CONFIG_SUN50I_A100_CCU=y
+CONFIG_SUN50I_A100_R_CCU=y
+CONFIG_SUN50I_A64_CCU=y
+CONFIG_SUN50I_H616_CCU=y
+CONFIG_SUN50I_H6_CCU=y
+CONFIG_SUN50I_H6_R_CCU=y
+CONFIG_SUN50I_IOMMU=y
+CONFIG_SUN6I_MSGBOX=y
+CONFIG_SUN6I_RTC_CCU=y
+# CONFIG_SUN8I_A83T_CCU is not set
+CONFIG_SUN8I_DE2_CCU=y
+# CONFIG_SUN8I_H3_CCU is not set
+CONFIG_SUN8I_R_CCU=y
+CONFIG_SUN8I_THERMAL=y
+CONFIG_SUNXI_CCU=y
+CONFIG_SUNXI_RSB=y
+CONFIG_SUNXI_WATCHDOG=y
+CONFIG_SYNC_FILE=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+# CONFIG_TCG_TIS_SYNQUACER is not set
+CONFIG_THREAD_INFO_IN_TASK=y
+# CONFIG_THUNDERX2_PMU is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+# CONFIG_TURRIS_MOX_RWTM is not set
+CONFIG_TYPEC=y
+# CONFIG_TYPEC_ANX7411 is not set
+# CONFIG_TYPEC_DP_ALTMODE is not set
+# CONFIG_TYPEC_FUSB302 is not set
+# CONFIG_TYPEC_HD3SS3220 is not set
+# CONFIG_TYPEC_MUX_FSA4480 is not set
+# CONFIG_TYPEC_MUX_PI3USB30532 is not set
+# CONFIG_TYPEC_RT1711H is not set
+# CONFIG_TYPEC_RT1719 is not set
+# CONFIG_TYPEC_STUSB160X is not set
+CONFIG_TYPEC_TCPCI=y
+# CONFIG_TYPEC_TCPCI_MAXIM is not set
+CONFIG_TYPEC_TCPM=y
+# CONFIG_TYPEC_TPS6598X is not set
+# CONFIG_TYPEC_WUSB3801 is not set
+# CONFIG_UACCE is not set
+CONFIG_UNMAP_KERNEL_AT_EL0=y
+# CONFIG_USB_BRCMSTB is not set
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_GENERIC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_CHIPIDEA_IMX=y
+CONFIG_USB_CHIPIDEA_PCI=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_DUAL_ROLE=y
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_DWC3_HAPS=y
+# CONFIG_USB_DWC3_HOST is not set
+CONFIG_USB_DWC3_IMX8MP=y
+# CONFIG_USB_DWC3_OF_SIMPLE is not set
+CONFIG_USB_DWC3_PCI=y
+# CONFIG_USB_DWC3_ULPI is not set
+CONFIG_USB_DWC3_XILINX=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_ORION=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_EMXX is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_MXS_PHY=y
+CONFIG_USB_OHCI_EXYNOS=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_FSM=y
+CONFIG_USB_RENESAS_USB3=y
+CONFIG_USB_RENESAS_USBHS=y
+CONFIG_USB_RENESAS_USBHS_HCD=y
+CONFIG_USB_RENESAS_USBHS_UDC=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_HISTB=y
+CONFIG_USB_XHCI_MVEBU=y
+CONFIG_USB_XHCI_PLATFORM=y
+CONFIG_VEXPRESS_CONFIG=y
+CONFIG_VIDEOMODE_HELPERS=y
+CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
+# CONFIG_VIRTIO_IOMMU is not set
+CONFIG_VIRTUALIZATION=y
+CONFIG_VMAP_STACK=y
+CONFIG_WDAT_WDT=y
+# CONFIG_XILINX_AMS is not set
+# CONFIG_XILINX_INTC is not set
+CONFIG_XLNX_EVENT_MANAGER=y
+CONFIG_ZONE_DMA32=y
+CONFIG_ZYNQMP_FIRMWARE=y
+# CONFIG_ZYNQMP_FIRMWARE_DEBUG is not set
+CONFIG_ZYNQMP_PM_DOMAINS=y
+CONFIG_ZYNQMP_POWER=y
--- /dev/null
+CONFIG_64BIT=y
+CONFIG_9P_FS=y
+# CONFIG_9P_FS_POSIX_ACL is not set
+# CONFIG_9P_FS_SECURITY is not set
+# CONFIG_A64FX_DIAG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_EINJ=y
+# CONFIG_ACPI_APEI_ERST_DEBUG is not set
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_MEMORY_FAILURE=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_BATTERY=y
+# CONFIG_ACPI_BGRT is not set
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_CCA_REQUIRED=y
+CONFIG_ACPI_CONTAINER=y
+CONFIG_ACPI_CPPC_CPUFREQ=y
+# CONFIG_ACPI_DEBUG is not set
+# CONFIG_ACPI_DEBUGGER is not set
+# CONFIG_ACPI_DOCK is not set
+# CONFIG_ACPI_EC_DEBUGFS is not set
+CONFIG_ACPI_FAN=y
+CONFIG_ACPI_GENERIC_GSI=y
+CONFIG_ACPI_GTDT=y
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_I2C_OPREGION=y
+CONFIG_ACPI_IORT=y
+CONFIG_ACPI_MCFG=y
+# CONFIG_ACPI_PCI_SLOT is not set
+# CONFIG_ACPI_PFRUT is not set
+CONFIG_ACPI_PPTT=y
+CONFIG_ACPI_PRMT=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_PROCESSOR_IDLE=y
+CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
+CONFIG_ACPI_SPCR_TABLE=y
+CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_TINY_POWER_BUTTON is not set
+# CONFIG_ALIBABA_UNCORE_DRW_PMU is not set
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=24
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_STACKWALK=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANTS_NO_INSTR=y
+CONFIG_ARM64=y
+CONFIG_ARM64_4K_PAGES=y
+# CONFIG_ARM64_ACPI_PARKING_PROTOCOL is not set
+CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
+CONFIG_ARM64_PAGE_SHIFT=12
+CONFIG_ARM64_PA_BITS=48
+CONFIG_ARM64_PA_BITS_48=y
+CONFIG_ARM64_TAGGED_ADDR_ABI=y
+CONFIG_ARM64_VA_BITS=39
+CONFIG_ARM64_VA_BITS_39=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GIC_V2M=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_ARM_GIC_V3_ITS_PCI=y
+CONFIG_ARM_PSCI_FW=y
+# CONFIG_ARM_SMMU_V3_PMU is not set
+CONFIG_ATA=y
+CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+CONFIG_BALLOON_COMPACTION=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NVME=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLK_MQ_VIRTIO=y
+CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMMON_CLK=y
+# CONFIG_COMPAT_32BIT_TIME is not set
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_CRC32=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ACPI=y
+CONFIG_DMA_DIRECT_REMAP=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_REMAP=y
+CONFIG_DMI=y
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=y
+CONFIG_DTC=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EFI=y
+CONFIG_EFIVAR_FS=y
+CONFIG_EFI_ARMSTUB_DTB_LOADER=y
+# CONFIG_EFI_BOOTLOADER_CONTROL is not set
+# CONFIG_EFI_CAPSULE_LOADER is not set
+# CONFIG_EFI_COCO_SECRET is not set
+# CONFIG_EFI_CUSTOM_SSDT_OVERLAYS is not set
+# CONFIG_EFI_DISABLE_PCI_DMA is not set
+# CONFIG_EFI_DISABLE_RUNTIME is not set
+CONFIG_EFI_EARLYCON=y
+CONFIG_EFI_ESRT=y
+CONFIG_EFI_GENERIC_STUB=y
+# CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER is not set
+CONFIG_EFI_PARAMS_FROM_FDT=y
+CONFIG_EFI_RUNTIME_WRAPPERS=y
+CONFIG_EFI_STUB=y
+# CONFIG_EFI_TEST is not set
+# CONFIG_EFI_ZBOOT is not set
+CONFIG_EXT4_FS=y
+CONFIG_F2FS_FS=y
+CONFIG_FAILOVER=y
+CONFIG_FB_EFI=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_AUTOSELECT=y
+CONFIG_FONT_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FS_IOMAP=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ARCH_TOPOLOGY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_ACPI=y
+CONFIG_GPIO_CDEV=y
+# CONFIG_GPIO_HISI is not set
+CONFIG_GPIO_PL061=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HID=y
+CONFIG_HID_GENERIC=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_HOTPLUG_PCI_ACPI=y
+CONFIG_HVC_DRIVER=y
+CONFIG_HZ_PERIODIC=y
+# CONFIG_I2C_AMD_MP2 is not set
+CONFIG_I2C_HID_ACPI=y
+# CONFIG_I2C_HISI is not set
+# CONFIG_I2C_SLAVE_TESTUNIT is not set
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+# CONFIG_ISCSI_IBFT is not set
+CONFIG_JBD2=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MEMORY_BALLOON=y
+CONFIG_MIGRATION=y
+# CONFIG_MLXBF_GIGE is not set
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_MVMDIO=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_NET_9P=y
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_NET_9P_FD is not set
+CONFIG_NET_9P_VIRTIO=y
+CONFIG_NET_FAILOVER=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NLS=y
+CONFIG_NR_CPUS=256
+CONFIG_NVMEM=y
+CONFIG_NVME_CORE=y
+# CONFIG_NVME_MULTIPATH is not set
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_PADATA=y
+CONFIG_PAGE_REPORTING=y
+CONFIG_PARTITION_PERCPU=y
+CONFIG_PCI=y
+# CONFIG_PCIE_HISI_ERR is not set
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_ECAM=y
+CONFIG_PCI_HOST_COMMON=y
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+CONFIG_PGTABLE_LEVELS=3
+CONFIG_PHYS_ADDR_T_64BIT=y
+# CONFIG_PMIC_OPREGION is not set
+CONFIG_PNP=y
+CONFIG_PNPACPI=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PTP_1588_CLOCK_OPTIONAL=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_RATIONAL=y
+# CONFIG_RESET_ATTACK_MITIGATION is not set
+CONFIG_RFS_ACCEL=y
+CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
+CONFIG_RPS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_HOST=y
+CONFIG_SCSI=y
+CONFIG_SCSI_COMMON=y
+CONFIG_SCSI_VIRTIO=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_EARLYCON=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SG_POOL=y
+CONFIG_SMP=y
+CONFIG_SOCK_RX_QUEUE_MAPPING=y
+CONFIG_SPARSEMEM=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SRCU=y
+# CONFIG_SURFACE_PLATFORMS is not set
+CONFIG_SWIOTLB=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYSFB=y
+# CONFIG_SYSFB_SIMPLEFB is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_OF=y
+CONFIG_THREAD_INFO_IN_TASK=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_ACPI=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+# CONFIG_UACCE is not set
+CONFIG_UCS2_STRING=y
+CONFIG_UNMAP_KERNEL_AT_EL0=y
+CONFIG_USB=y
+CONFIG_USB_HID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_PCI=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_VIRTIO=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_VIRTIO_NET=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_PCI_LEGACY=y
+CONFIG_VIRTIO_PCI_LIB=y
+CONFIG_VMAP_STACK=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_XPS=y
+CONFIG_ZONE_DMA32=y
--- /dev/null
+From b77c0ecdc7915e5c5c515da1aa6cfaf6f4eb8351 Mon Sep 17 00:00:00 2001
+From: Mathew McBride <matt@traverse.com.au>
+Date: Wed, 28 Sep 2022 16:39:31 +1000
+Subject: [PATCH] arm: disable code size reduction measures
+ (gc-sections,-f*-sections)
+
+This interferes with the EFI boot stub on armv7l.
+
+Signed-off-by: Mathew McBride <matt@traverse.com.au>
+---
+ arch/arm/Kconfig | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -124,7 +124,6 @@ config ARM
+ select HAVE_VIRT_CPU_ACCOUNTING_GEN
+ select IRQ_FORCED_THREADING
+ select LOCK_MM_AND_FIND_VMA
+- select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
+ select MODULES_USE_ELF_REL
+ select NEED_DMA_MAP_STATE
+ select OF_EARLY_FLATTREE if OF
--- /dev/null
+From f3763a0c1b07273218cbf5886bdf8df9df501111 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:10 +0200
+Subject: [PATCH 03/14] net: dpaa2-eth: don't use -ENOTSUPP error code
+
+dpaa2_eth_setup_dpni() is called from the probe path and
+dpaa2_eth_set_link_ksettings() is propagated to user space.
+
+include/linux/errno.h says that ENOTSUPP is "Defined for the NFSv3
+protocol". Conventional wisdom has it to not use it in networking
+drivers. Replace it with -EOPNOTSUPP.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 2 +-
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+@@ -3614,7 +3614,7 @@ static int dpaa2_eth_setup_dpni(struct f
+ dev_err(dev, "DPNI version %u.%u not supported, need >= %u.%u\n",
+ priv->dpni_ver_major, priv->dpni_ver_minor,
+ DPNI_VER_MAJOR, DPNI_VER_MINOR);
+- err = -ENOTSUPP;
++ err = -EOPNOTSUPP;
+ goto close;
+ }
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
+@@ -118,7 +118,7 @@ dpaa2_eth_set_link_ksettings(struct net_
+ struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
+
+ if (!dpaa2_eth_is_type_phy(priv))
+- return -ENOTSUPP;
++ return -EOPNOTSUPP;
+
+ return phylink_ethtool_ksettings_set(priv->mac->phylink, link_settings);
+ }
--- /dev/null
+From 022a11062261dc4703da846d3bf4d194ef6bebf5 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:11 +0200
+Subject: [PATCH 04/14] net: dpaa2: replace dpaa2_mac_is_type_fixed() with
+ dpaa2_mac_is_type_phy()
+
+dpaa2_mac_is_type_fixed() is a header with no implementation and no
+callers, which is referenced from the documentation though. It can be
+deleted.
+
+On the other hand, it would be useful to reuse the code between
+dpaa2_eth_is_type_phy() and dpaa2_switch_port_is_type_phy(). That common
+code should be called dpaa2_mac_is_type_phy(), so let's create that.
+
+The removal and the addition are merged into the same patch because,
+in fact, is_type_phy() is the logical opposite of is_type_fixed().
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ .../ethernet/freescale/dpaa2/mac-phy-support.rst | 9 ++++++---
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 7 +------
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h | 10 ++++++++--
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h | 7 +------
+ 4 files changed, 16 insertions(+), 17 deletions(-)
+
+--- a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst
++++ b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst
+@@ -181,10 +181,13 @@ when necessary using the below listed AP
+ - int dpaa2_mac_connect(struct dpaa2_mac *mac);
+ - void dpaa2_mac_disconnect(struct dpaa2_mac *mac);
+
+-A phylink integration is necessary only when the partner DPMAC is not of TYPE_FIXED.
+-One can check for this condition using the below API::
++A phylink integration is necessary only when the partner DPMAC is not of
++``TYPE_FIXED``. This means it is either of ``TYPE_PHY``, or of
++``TYPE_BACKPLANE`` (the difference being the two that in the ``TYPE_BACKPLANE``
++mode, the MC firmware does not access the PCS registers). One can check for
++this condition using the following helper::
+
+- - bool dpaa2_mac_is_type_fixed(struct fsl_mc_device *dpmac_dev,struct fsl_mc_io *mc_io);
++ - static inline bool dpaa2_mac_is_type_phy(struct dpaa2_mac *mac);
+
+ Before connection to a MAC, the caller must allocate and populate the
+ dpaa2_mac structure with the associated net_device, a pointer to the MC portal
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
+@@ -733,12 +733,7 @@ static inline unsigned int dpaa2_eth_rx_
+
+ static inline bool dpaa2_eth_is_type_phy(struct dpaa2_eth_priv *priv)
+ {
+- if (priv->mac &&
+- (priv->mac->attr.link_type == DPMAC_LINK_TYPE_PHY ||
+- priv->mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE))
+- return true;
+-
+- return false;
++ return dpaa2_mac_is_type_phy(priv->mac);
+ }
+
+ static inline bool dpaa2_eth_has_mac(struct dpaa2_eth_priv *priv)
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h
+@@ -30,8 +30,14 @@ struct dpaa2_mac {
+ struct phy *serdes_phy;
+ };
+
+-bool dpaa2_mac_is_type_fixed(struct fsl_mc_device *dpmac_dev,
+- struct fsl_mc_io *mc_io);
++static inline bool dpaa2_mac_is_type_phy(struct dpaa2_mac *mac)
++{
++ if (!mac)
++ return false;
++
++ return mac->attr.link_type == DPMAC_LINK_TYPE_PHY ||
++ mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE;
++}
+
+ int dpaa2_mac_open(struct dpaa2_mac *mac);
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
+@@ -230,12 +230,7 @@ static inline bool dpaa2_switch_supports
+ static inline bool
+ dpaa2_switch_port_is_type_phy(struct ethsw_port_priv *port_priv)
+ {
+- if (port_priv->mac &&
+- (port_priv->mac->attr.link_type == DPMAC_LINK_TYPE_PHY ||
+- port_priv->mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE))
+- return true;
+-
+- return false;
++ return dpaa2_mac_is_type_phy(port_priv->mac);
+ }
+
+ static inline bool dpaa2_switch_port_has_mac(struct ethsw_port_priv *port_priv)
--- /dev/null
+From 97c07369ab8bf9895e05d4b468f18e6567263154 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:12 +0200
+Subject: [PATCH 05/14] net: dpaa2-mac: absorb phylink_start() call into
+ dpaa2_mac_start()
+
+The phylink handling is intended to be hidden inside the dpaa2_mac
+object. Move the phylink_start() call into dpaa2_mac_start(), and
+phylink_stop() into dpaa2_mac_stop().
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 5 +----
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 8 ++++++++
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c | 5 +----
+ 3 files changed, 10 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+@@ -2083,10 +2083,8 @@ static int dpaa2_eth_open(struct net_dev
+ goto enable_err;
+ }
+
+- if (dpaa2_eth_is_type_phy(priv)) {
++ if (dpaa2_eth_is_type_phy(priv))
+ dpaa2_mac_start(priv->mac);
+- phylink_start(priv->mac->phylink);
+- }
+
+ return 0;
+
+@@ -2160,7 +2158,6 @@ static int dpaa2_eth_stop(struct net_dev
+ int retries = 10;
+
+ if (dpaa2_eth_is_type_phy(priv)) {
+- phylink_stop(priv->mac->phylink);
+ dpaa2_mac_stop(priv->mac);
+ } else {
+ netif_tx_stop_all_queues(net_dev);
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+@@ -336,12 +336,20 @@ static void dpaa2_mac_set_supported_inte
+
+ void dpaa2_mac_start(struct dpaa2_mac *mac)
+ {
++ ASSERT_RTNL();
++
+ if (mac->serdes_phy)
+ phy_power_on(mac->serdes_phy);
++
++ phylink_start(mac->phylink);
+ }
+
+ void dpaa2_mac_stop(struct dpaa2_mac *mac)
+ {
++ ASSERT_RTNL();
++
++ phylink_stop(mac->phylink);
++
+ if (mac->serdes_phy)
+ phy_power_off(mac->serdes_phy);
+ }
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
+@@ -703,10 +703,8 @@ static int dpaa2_switch_port_open(struct
+
+ dpaa2_switch_enable_ctrl_if_napi(ethsw);
+
+- if (dpaa2_switch_port_is_type_phy(port_priv)) {
++ if (dpaa2_switch_port_is_type_phy(port_priv))
+ dpaa2_mac_start(port_priv->mac);
+- phylink_start(port_priv->mac->phylink);
+- }
+
+ return 0;
+ }
+@@ -718,7 +716,6 @@ static int dpaa2_switch_port_stop(struct
+ int err;
+
+ if (dpaa2_switch_port_is_type_phy(port_priv)) {
+- phylink_stop(port_priv->mac->phylink);
+ dpaa2_mac_stop(port_priv->mac);
+ } else {
+ netif_tx_stop_all_queues(netdev);
--- /dev/null
+From 095ef388f714d622aa503fcccf20dc4095b72762 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:13 +0200
+Subject: [PATCH 06/14] net: dpaa2-mac: remove defensive check in
+ dpaa2_mac_disconnect()
+
+dpaa2_mac_disconnect() will only be called with a NULL mac->phylink if
+dpaa2_mac_connect() failed, or was never called.
+
+The callers are these:
+
+dpaa2_eth_disconnect_mac():
+
+ if (dpaa2_eth_is_type_phy(priv))
+ dpaa2_mac_disconnect(priv->mac);
+
+dpaa2_switch_port_disconnect_mac():
+
+ if (dpaa2_switch_port_is_type_phy(port_priv))
+ dpaa2_mac_disconnect(port_priv->mac);
+
+priv->mac can be NULL, but in that case, dpaa2_eth_is_type_phy() returns
+false, and dpaa2_mac_disconnect() is never called. Similar for
+dpaa2-switch.
+
+When priv->mac is non-NULL, it means that dpaa2_mac_connect() returned
+zero (success), and therefore, priv->mac->phylink is also a valid
+pointer.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 3 ---
+ 1 file changed, 3 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+@@ -446,9 +446,6 @@ err_pcs_destroy:
+
+ void dpaa2_mac_disconnect(struct dpaa2_mac *mac)
+ {
+- if (!mac->phylink)
+- return;
+-
+ phylink_disconnect_phy(mac->phylink);
+ phylink_destroy(mac->phylink);
+ dpaa2_pcs_destroy(mac);
--- /dev/null
+From 06efc9b8a1360cad83cae6e71558e5458cc1fbf3 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:14 +0200
+Subject: [PATCH 07/14] net: dpaa2-eth: assign priv->mac after
+ dpaa2_mac_connect() call
+
+There are 2 requirements for correct code:
+
+- Any time the driver accesses the priv->mac pointer at runtime, it
+ either holds NULL to indicate a DPNI-DPNI connection (or unconnected
+ DPNI), or a struct dpaa2_mac whose phylink instance was fully
+ initialized (created and connected to the PHY). No changes are made to
+ priv->mac while it is being used. Currently, rtnl_lock() watches over
+ the call to dpaa2_eth_connect_mac(), so it serves the purpose of
+ serializing this with all readers of priv->mac.
+
+- dpaa2_mac_connect() should run unlocked, because inside it are 2
+ phylink calls with incompatible locking requirements: phylink_create()
+ requires that the rtnl_mutex isn't held, and phylink_fwnode_phy_connect()
+ requires that the rtnl_mutex is held. The only way to solve those
+ contradictory requirements is to let dpaa2_mac_connect() take
+ rtnl_lock() when it needs to.
+
+To solve both requirements, we need to identify the writer side of the
+priv->mac pointer, which can be wrapped in a mutex private to the driver
+in a future patch. The dpaa2_mac_connect() cannot be part of the writer
+side critical section, because of an AB/BA deadlock with rtnl_lock().
+
+So the strategy needs to be that where we prepare the DPMAC by calling
+dpaa2_mac_connect(), and only make priv->mac point to it once it's fully
+prepared. This ensures that the writer side critical section has the
+absolute minimum surface it can.
+
+The reverse strategy is adopted in the dpaa2_eth_disconnect_mac() code
+path. This makes sure that priv->mac is NULL when we start tearing down
+the DPMAC that we disconnected from, and concurrent code will simply not
+see it.
+
+No locking changes in this patch (concurrent code is still blocked by
+the rtnl_mutex).
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ .../net/ethernet/freescale/dpaa2/dpaa2-eth.c | 21 +++++++++++--------
+ 1 file changed, 12 insertions(+), 9 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+@@ -4444,9 +4444,8 @@ static int dpaa2_eth_connect_mac(struct
+ err = dpaa2_mac_open(mac);
+ if (err)
+ goto err_free_mac;
+- priv->mac = mac;
+
+- if (dpaa2_eth_is_type_phy(priv)) {
++ if (dpaa2_mac_is_type_phy(mac)) {
+ err = dpaa2_mac_connect(mac);
+ if (err && err != -EPROBE_DEFER)
+ netdev_err(priv->net_dev, "Error connecting to the MAC endpoint: %pe",
+@@ -4455,11 +4454,12 @@ static int dpaa2_eth_connect_mac(struct
+ goto err_close_mac;
+ }
+
++ priv->mac = mac;
++
+ return 0;
+
+ err_close_mac:
+ dpaa2_mac_close(mac);
+- priv->mac = NULL;
+ err_free_mac:
+ kfree(mac);
+ return err;
+@@ -4467,15 +4467,18 @@ err_free_mac:
+
+ static void dpaa2_eth_disconnect_mac(struct dpaa2_eth_priv *priv)
+ {
+- if (dpaa2_eth_is_type_phy(priv))
+- dpaa2_mac_disconnect(priv->mac);
++ struct dpaa2_mac *mac = priv->mac;
++
++ priv->mac = NULL;
+
+- if (!dpaa2_eth_has_mac(priv))
++ if (!mac)
+ return;
+
+- dpaa2_mac_close(priv->mac);
+- kfree(priv->mac);
+- priv->mac = NULL;
++ if (dpaa2_mac_is_type_phy(mac))
++ dpaa2_mac_disconnect(mac);
++
++ dpaa2_mac_close(mac);
++ kfree(mac);
+ }
+
+ static irqreturn_t dpni_irq0_handler_thread(int irq_num, void *arg)
--- /dev/null
+From a5e7f7e277bd4403c45c1c7922d56d0eb08dbc7c Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:15 +0200
+Subject: [PATCH 08/14] net: dpaa2-switch: assign port_priv->mac after
+ dpaa2_mac_connect() call
+
+The dpaa2-switch has the exact same locking requirements when connected
+to a DPMAC, so it needs port_priv->mac to always point either to NULL,
+or to a DPMAC with a fully initialized phylink instance.
+
+Make the same preparatory change in the dpaa2-switch driver as in the
+dpaa2-eth one.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ .../ethernet/freescale/dpaa2/dpaa2-switch.c | 21 +++++++++++--------
+ 1 file changed, 12 insertions(+), 9 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
+@@ -1450,9 +1450,8 @@ static int dpaa2_switch_port_connect_mac
+ err = dpaa2_mac_open(mac);
+ if (err)
+ goto err_free_mac;
+- port_priv->mac = mac;
+
+- if (dpaa2_switch_port_is_type_phy(port_priv)) {
++ if (dpaa2_mac_is_type_phy(mac)) {
+ err = dpaa2_mac_connect(mac);
+ if (err) {
+ netdev_err(port_priv->netdev,
+@@ -1462,11 +1461,12 @@ static int dpaa2_switch_port_connect_mac
+ }
+ }
+
++ port_priv->mac = mac;
++
+ return 0;
+
+ err_close_mac:
+ dpaa2_mac_close(mac);
+- port_priv->mac = NULL;
+ err_free_mac:
+ kfree(mac);
+ return err;
+@@ -1474,15 +1474,18 @@ err_free_mac:
+
+ static void dpaa2_switch_port_disconnect_mac(struct ethsw_port_priv *port_priv)
+ {
+- if (dpaa2_switch_port_is_type_phy(port_priv))
+- dpaa2_mac_disconnect(port_priv->mac);
++ struct dpaa2_mac *mac = port_priv->mac;
++
++ port_priv->mac = NULL;
+
+- if (!dpaa2_switch_port_has_mac(port_priv))
++ if (!mac)
+ return;
+
+- dpaa2_mac_close(port_priv->mac);
+- kfree(port_priv->mac);
+- port_priv->mac = NULL;
++ if (dpaa2_mac_is_type_phy(mac))
++ dpaa2_mac_disconnect(mac);
++
++ dpaa2_mac_close(mac);
++ kfree(mac);
+ }
+
+ static irqreturn_t dpaa2_switch_irq0_handler_thread(int irq_num, void *arg)
--- /dev/null
+From ce44b6ed9ee65efa9b3025552c513842eabcab88 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:16 +0200
+Subject: [PATCH 09/14] net: dpaa2: publish MAC stringset to ethtool -S even if
+ MAC is missing
+
+DPNIs and DPSW objects can connect and disconnect at runtime from DPMAC
+objects on the same fsl-mc bus. The DPMAC object also holds "ethtool -S"
+unstructured counters. Those counters are only shown for the entity
+owning the netdev (DPNI, DPSW) if it's connected to a DPMAC.
+
+The ethtool stringset code path is split into multiple callbacks, but
+currently, connecting and disconnecting the DPMAC takes the rtnl_lock().
+This blocks the entire ethtool code path from running, see
+ethnl_default_doit() -> rtnl_lock() -> ops->prepare_data() ->
+strset_prepare_data().
+
+This is going to be a problem if we are going to no longer require
+rtnl_lock() when connecting/disconnecting the DPMAC, because the DPMAC
+could appear between ops->get_sset_count() and ops->get_strings().
+If it appears out of the blue, we will provide a stringset into an array
+that was dimensioned thinking the DPMAC wouldn't be there => array
+accessed out of bounds.
+
+There isn't really a good way to work around that, and I don't want to
+put too much pressure on the ethtool framework by playing locking games.
+Just make the DPMAC counters be always available. They'll be zeroes if
+the DPNI or DPSW isn't connected to a DPMAC.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c | 12 +++---------
+ .../ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c | 11 ++---------
+ 2 files changed, 5 insertions(+), 18 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
+@@ -186,7 +186,6 @@ static int dpaa2_eth_set_pauseparam(stru
+ static void dpaa2_eth_get_strings(struct net_device *netdev, u32 stringset,
+ u8 *data)
+ {
+- struct dpaa2_eth_priv *priv = netdev_priv(netdev);
+ u8 *p = data;
+ int i;
+
+@@ -200,22 +199,17 @@ static void dpaa2_eth_get_strings(struct
+ strscpy(p, dpaa2_ethtool_extras[i], ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+- if (dpaa2_eth_has_mac(priv))
+- dpaa2_mac_get_strings(p);
++ dpaa2_mac_get_strings(p);
+ break;
+ }
+ }
+
+ static int dpaa2_eth_get_sset_count(struct net_device *net_dev, int sset)
+ {
+- int num_ss_stats = DPAA2_ETH_NUM_STATS + DPAA2_ETH_NUM_EXTRA_STATS;
+- struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
+-
+ switch (sset) {
+ case ETH_SS_STATS: /* ethtool_get_stats(), ethtool_get_drvinfo() */
+- if (dpaa2_eth_has_mac(priv))
+- num_ss_stats += dpaa2_mac_get_sset_count();
+- return num_ss_stats;
++ return DPAA2_ETH_NUM_STATS + DPAA2_ETH_NUM_EXTRA_STATS +
++ dpaa2_mac_get_sset_count();
+ default:
+ return -EOPNOTSUPP;
+ }
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
+@@ -145,14 +145,9 @@ dpaa2_switch_set_link_ksettings(struct n
+ static int
+ dpaa2_switch_ethtool_get_sset_count(struct net_device *netdev, int sset)
+ {
+- struct ethsw_port_priv *port_priv = netdev_priv(netdev);
+- int num_ss_stats = DPAA2_SWITCH_NUM_COUNTERS;
+-
+ switch (sset) {
+ case ETH_SS_STATS:
+- if (port_priv->mac)
+- num_ss_stats += dpaa2_mac_get_sset_count();
+- return num_ss_stats;
++ return DPAA2_SWITCH_NUM_COUNTERS + dpaa2_mac_get_sset_count();
+ default:
+ return -EOPNOTSUPP;
+ }
+@@ -161,7 +156,6 @@ dpaa2_switch_ethtool_get_sset_count(stru
+ static void dpaa2_switch_ethtool_get_strings(struct net_device *netdev,
+ u32 stringset, u8 *data)
+ {
+- struct ethsw_port_priv *port_priv = netdev_priv(netdev);
+ u8 *p = data;
+ int i;
+
+@@ -172,8 +166,7 @@ static void dpaa2_switch_ethtool_get_str
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+- if (port_priv->mac)
+- dpaa2_mac_get_strings(p);
++ dpaa2_mac_get_strings(p);
+ break;
+ }
+ }
--- /dev/null
+From c838d9fd7e6ba9ddd6006bf0a296396266e9f121 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:17 +0200
+Subject: [PATCH 10/14] net: dpaa2-switch replace direct MAC access with
+ dpaa2_switch_port_has_mac()
+
+The helper function will gain a lockdep annotation in a future patch.
+Make sure to benefit from it.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
+@@ -189,7 +189,7 @@ static void dpaa2_switch_ethtool_get_sta
+ dpaa2_switch_ethtool_counters[i].name, err);
+ }
+
+- if (port_priv->mac)
++ if (dpaa2_switch_port_has_mac(port_priv))
+ dpaa2_mac_get_ethtool_stats(port_priv->mac, data + i);
+ }
+
--- /dev/null
+From e0ea63162cb5f1ca7f844d6ef5fc4079448ee2d5 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:18 +0200
+Subject: [PATCH 11/14] net: dpaa2-eth: connect to MAC before requesting the
+ "endpoint changed" IRQ
+
+dpaa2_eth_connect_mac() is called both from dpaa2_eth_probe() and from
+dpni_irq0_handler_thread().
+
+It could happen that the DPNI gets connected to a DPMAC on the fsl-mc
+bus exactly during probe, as soon as the "endpoint change" interrupt is
+requested in dpaa2_eth_setup_irqs(). This will cause the
+dpni_irq0_handler_thread() to register a phylink instance for that DPMAC.
+
+Then, the probing function will also try to register a phylink instance
+for the same DPMAC, operation which should fail (and this will fail the
+probing of the driver).
+
+Reorder dpaa2_eth_setup_irqs() and dpaa2_eth_connect_mac(), such that
+dpni_irq0_handler_thread() never races with the DPMAC-related portion of
+the probing path.
+
+Also reorder dpaa2_eth_disconnect_mac() to be in the mirror position of
+dpaa2_eth_connect_mac() in the teardown path.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ .../net/ethernet/freescale/dpaa2/dpaa2-eth.c | 18 +++++++++---------
+ 1 file changed, 9 insertions(+), 9 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+@@ -4711,6 +4711,10 @@ static int dpaa2_eth_probe(struct fsl_mc
+ }
+ #endif
+
++ err = dpaa2_eth_connect_mac(priv);
++ if (err)
++ goto err_connect_mac;
++
+ err = dpaa2_eth_setup_irqs(dpni_dev);
+ if (err) {
+ netdev_warn(net_dev, "Failed to set link interrupt, fall back to polling\n");
+@@ -4723,10 +4727,6 @@ static int dpaa2_eth_probe(struct fsl_mc
+ priv->do_link_poll = true;
+ }
+
+- err = dpaa2_eth_connect_mac(priv);
+- if (err)
+- goto err_connect_mac;
+-
+ err = dpaa2_eth_dl_alloc(priv);
+ if (err)
+ goto err_dl_register;
+@@ -4762,13 +4762,13 @@ err_dl_port_add:
+ err_dl_trap_register:
+ dpaa2_eth_dl_free(priv);
+ err_dl_register:
+- dpaa2_eth_disconnect_mac(priv);
+-err_connect_mac:
+ if (priv->do_link_poll)
+ kthread_stop(priv->poll_thread);
+ else
+ fsl_mc_free_irqs(dpni_dev);
+ err_poll_thread:
++ dpaa2_eth_disconnect_mac(priv);
++err_connect_mac:
+ dpaa2_eth_free_rings(priv);
+ err_alloc_rings:
+ err_csum:
+@@ -4816,9 +4816,6 @@ static int dpaa2_eth_remove(struct fsl_m
+ #endif
+
+ unregister_netdev(net_dev);
+- rtnl_lock();
+- dpaa2_eth_disconnect_mac(priv);
+- rtnl_unlock();
+
+ dpaa2_eth_dl_port_del(priv);
+ dpaa2_eth_dl_traps_unregister(priv);
+@@ -4829,6 +4826,9 @@ static int dpaa2_eth_remove(struct fsl_m
+ else
+ fsl_mc_free_irqs(ls_dev);
+
++ rtnl_lock();
++ dpaa2_eth_disconnect_mac(priv);
++ rtnl_unlock();
+ dpaa2_eth_free_rings(priv);
+ free_percpu(priv->fd);
+ free_percpu(priv->sgt_cache);
--- /dev/null
+From 5e448a17dfa2e95166534df7f677a3694ef6187d Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:19 +0200
+Subject: [PATCH 12/14] net: dpaa2-eth: serialize changes to priv->mac with a
+ mutex
+
+The dpaa2 architecture permits dynamic connections between objects on
+the fsl-mc bus, specifically between a DPNI object (represented by a
+struct net_device) and a DPMAC object (represented by a struct phylink).
+
+The DPNI driver is notified when those connections are created/broken
+through the dpni_irq0_handler_thread() method. To ensure that ethtool
+operations, as well as netdev up/down operations serialize with the
+connection/disconnection of the DPNI with a DPMAC,
+dpni_irq0_handler_thread() takes the rtnl_lock() to block those other
+operations from taking place.
+
+There is code called by dpaa2_mac_connect() which wants to acquire the
+rtnl_mutex once again, see phylink_create() -> phylink_register_sfp() ->
+sfp_bus_add_upstream() -> rtnl_lock(). So the strategy doesn't quite
+work out, even though it's fairly simple.
+
+Create a different strategy, where all code paths in the dpaa2-eth
+driver access priv->mac only while they are holding priv->mac_lock.
+The phylink instance is not created or connected to the PHY under the
+priv->mac_lock, but only assigned to priv->mac then. This will eliminate
+the reliance on the rtnl_mutex.
+
+Add lockdep annotations and put comments where holding the lock is not
+necessary, and priv->mac can be dereferenced freely.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ .../net/ethernet/freescale/dpaa2/dpaa2-eth.c | 43 ++++++++++++--
+ .../net/ethernet/freescale/dpaa2/dpaa2-eth.h | 6 ++
+ .../ethernet/freescale/dpaa2/dpaa2-ethtool.c | 58 +++++++++++++++----
+ 3 files changed, 91 insertions(+), 16 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+@@ -2021,8 +2021,11 @@ static int dpaa2_eth_link_state_update(s
+
+ /* When we manage the MAC/PHY using phylink there is no need
+ * to manually update the netif_carrier.
++ * We can avoid locking because we are called from the "link changed"
++ * IRQ handler, which is the same as the "endpoint changed" IRQ handler
++ * (the writer to priv->mac), so we cannot race with it.
+ */
+- if (dpaa2_eth_is_type_phy(priv))
++ if (dpaa2_mac_is_type_phy(priv->mac))
+ goto out;
+
+ /* Chech link state; speed / duplex changes are not treated yet */
+@@ -2061,6 +2064,8 @@ static int dpaa2_eth_open(struct net_dev
+ priv->dpbp_dev->obj_desc.id, priv->bpid);
+ }
+
++ mutex_lock(&priv->mac_lock);
++
+ if (!dpaa2_eth_is_type_phy(priv)) {
+ /* We'll only start the txqs when the link is actually ready;
+ * make sure we don't race against the link up notification,
+@@ -2079,6 +2084,7 @@ static int dpaa2_eth_open(struct net_dev
+
+ err = dpni_enable(priv->mc_io, 0, priv->mc_token);
+ if (err < 0) {
++ mutex_unlock(&priv->mac_lock);
+ netdev_err(net_dev, "dpni_enable() failed\n");
+ goto enable_err;
+ }
+@@ -2086,6 +2092,8 @@ static int dpaa2_eth_open(struct net_dev
+ if (dpaa2_eth_is_type_phy(priv))
+ dpaa2_mac_start(priv->mac);
+
++ mutex_unlock(&priv->mac_lock);
++
+ return 0;
+
+ enable_err:
+@@ -2157,6 +2165,8 @@ static int dpaa2_eth_stop(struct net_dev
+ int dpni_enabled = 0;
+ int retries = 10;
+
++ mutex_lock(&priv->mac_lock);
++
+ if (dpaa2_eth_is_type_phy(priv)) {
+ dpaa2_mac_stop(priv->mac);
+ } else {
+@@ -2164,6 +2174,8 @@ static int dpaa2_eth_stop(struct net_dev
+ netif_carrier_off(net_dev);
+ }
+
++ mutex_unlock(&priv->mac_lock);
++
+ /* On dpni_disable(), the MC firmware will:
+ * - stop MAC Rx and wait for all Rx frames to be enqueued to software
+ * - cut off WRIOP dequeues from egress FQs and wait until transmission
+@@ -2489,12 +2501,20 @@ static int dpaa2_eth_ts_ioctl(struct net
+ static int dpaa2_eth_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+ {
+ struct dpaa2_eth_priv *priv = netdev_priv(dev);
++ int err;
+
+ if (cmd == SIOCSHWTSTAMP)
+ return dpaa2_eth_ts_ioctl(dev, rq, cmd);
+
+- if (dpaa2_eth_is_type_phy(priv))
+- return phylink_mii_ioctl(priv->mac->phylink, rq, cmd);
++ mutex_lock(&priv->mac_lock);
++
++ if (dpaa2_eth_is_type_phy(priv)) {
++ err = phylink_mii_ioctl(priv->mac->phylink, rq, cmd);
++ mutex_unlock(&priv->mac_lock);
++ return err;
++ }
++
++ mutex_unlock(&priv->mac_lock);
+
+ return -EOPNOTSUPP;
+ }
+@@ -4454,7 +4474,9 @@ static int dpaa2_eth_connect_mac(struct
+ goto err_close_mac;
+ }
+
++ mutex_lock(&priv->mac_lock);
+ priv->mac = mac;
++ mutex_unlock(&priv->mac_lock);
+
+ return 0;
+
+@@ -4467,9 +4489,12 @@ err_free_mac:
+
+ static void dpaa2_eth_disconnect_mac(struct dpaa2_eth_priv *priv)
+ {
+- struct dpaa2_mac *mac = priv->mac;
++ struct dpaa2_mac *mac;
+
++ mutex_lock(&priv->mac_lock);
++ mac = priv->mac;
+ priv->mac = NULL;
++ mutex_unlock(&priv->mac_lock);
+
+ if (!mac)
+ return;
+@@ -4488,6 +4513,7 @@ static irqreturn_t dpni_irq0_handler_thr
+ struct fsl_mc_device *dpni_dev = to_fsl_mc_device(dev);
+ struct net_device *net_dev = dev_get_drvdata(dev);
+ struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
++ bool had_mac;
+ int err;
+
+ err = dpni_get_irq_status(dpni_dev->mc_io, 0, dpni_dev->mc_handle,
+@@ -4505,7 +4531,12 @@ static irqreturn_t dpni_irq0_handler_thr
+ dpaa2_eth_update_tx_fqids(priv);
+
+ rtnl_lock();
+- if (dpaa2_eth_has_mac(priv))
++ /* We can avoid locking because the "endpoint changed" IRQ
++ * handler is the only one who changes priv->mac at runtime,
++ * so we are not racing with anyone.
++ */
++ had_mac = !!priv->mac;
++ if (had_mac)
+ dpaa2_eth_disconnect_mac(priv);
+ else
+ dpaa2_eth_connect_mac(priv);
+@@ -4606,6 +4637,8 @@ static int dpaa2_eth_probe(struct fsl_mc
+ priv = netdev_priv(net_dev);
+ priv->net_dev = net_dev;
+
++ mutex_init(&priv->mac_lock);
++
+ priv->iommu_domain = iommu_get_domain_for_dev(dev);
+
+ priv->tx_tstamp_type = HWTSTAMP_TX_OFF;
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
+@@ -580,6 +580,8 @@ struct dpaa2_eth_priv {
+ #endif
+
+ struct dpaa2_mac *mac;
++ /* Serializes changes to priv->mac */
++ struct mutex mac_lock;
+ struct workqueue_struct *dpaa2_ptp_wq;
+ struct work_struct tx_onestep_tstamp;
+ struct sk_buff_head tx_skbs;
+@@ -733,11 +735,15 @@ static inline unsigned int dpaa2_eth_rx_
+
+ static inline bool dpaa2_eth_is_type_phy(struct dpaa2_eth_priv *priv)
+ {
++ lockdep_assert_held(&priv->mac_lock);
++
+ return dpaa2_mac_is_type_phy(priv->mac);
+ }
+
+ static inline bool dpaa2_eth_has_mac(struct dpaa2_eth_priv *priv)
+ {
++ lockdep_assert_held(&priv->mac_lock);
++
+ return priv->mac ? true : false;
+ }
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
+@@ -86,11 +86,16 @@ static void dpaa2_eth_get_drvinfo(struct
+ static int dpaa2_eth_nway_reset(struct net_device *net_dev)
+ {
+ struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
++ int err = -EOPNOTSUPP;
++
++ mutex_lock(&priv->mac_lock);
+
+ if (dpaa2_eth_is_type_phy(priv))
+- return phylink_ethtool_nway_reset(priv->mac->phylink);
++ err = phylink_ethtool_nway_reset(priv->mac->phylink);
++
++ mutex_unlock(&priv->mac_lock);
+
+- return -EOPNOTSUPP;
++ return err;
+ }
+
+ static int
+@@ -98,10 +103,18 @@ dpaa2_eth_get_link_ksettings(struct net_
+ struct ethtool_link_ksettings *link_settings)
+ {
+ struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
++ int err;
+
+- if (dpaa2_eth_is_type_phy(priv))
+- return phylink_ethtool_ksettings_get(priv->mac->phylink,
+- link_settings);
++ mutex_lock(&priv->mac_lock);
++
++ if (dpaa2_eth_is_type_phy(priv)) {
++ err = phylink_ethtool_ksettings_get(priv->mac->phylink,
++ link_settings);
++ mutex_unlock(&priv->mac_lock);
++ return err;
++ }
++
++ mutex_unlock(&priv->mac_lock);
+
+ link_settings->base.autoneg = AUTONEG_DISABLE;
+ if (!(priv->link_state.options & DPNI_LINK_OPT_HALF_DUPLEX))
+@@ -116,11 +129,17 @@ dpaa2_eth_set_link_ksettings(struct net_
+ const struct ethtool_link_ksettings *link_settings)
+ {
+ struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
++ int err = -EOPNOTSUPP;
+
+- if (!dpaa2_eth_is_type_phy(priv))
+- return -EOPNOTSUPP;
++ mutex_lock(&priv->mac_lock);
++
++ if (dpaa2_eth_is_type_phy(priv))
++ err = phylink_ethtool_ksettings_set(priv->mac->phylink,
++ link_settings);
+
+- return phylink_ethtool_ksettings_set(priv->mac->phylink, link_settings);
++ mutex_unlock(&priv->mac_lock);
++
++ return err;
+ }
+
+ static void dpaa2_eth_get_pauseparam(struct net_device *net_dev,
+@@ -129,11 +148,16 @@ static void dpaa2_eth_get_pauseparam(str
+ struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
+ u64 link_options = priv->link_state.options;
+
++ mutex_lock(&priv->mac_lock);
++
+ if (dpaa2_eth_is_type_phy(priv)) {
+ phylink_ethtool_get_pauseparam(priv->mac->phylink, pause);
++ mutex_unlock(&priv->mac_lock);
+ return;
+ }
+
++ mutex_unlock(&priv->mac_lock);
++
+ pause->rx_pause = dpaa2_eth_rx_pause_enabled(link_options);
+ pause->tx_pause = dpaa2_eth_tx_pause_enabled(link_options);
+ pause->autoneg = AUTONEG_DISABLE;
+@@ -152,9 +176,17 @@ static int dpaa2_eth_set_pauseparam(stru
+ return -EOPNOTSUPP;
+ }
+
+- if (dpaa2_eth_is_type_phy(priv))
+- return phylink_ethtool_set_pauseparam(priv->mac->phylink,
+- pause);
++ mutex_lock(&priv->mac_lock);
++
++ if (dpaa2_eth_is_type_phy(priv)) {
++ err = phylink_ethtool_set_pauseparam(priv->mac->phylink,
++ pause);
++ mutex_unlock(&priv->mac_lock);
++ return err;
++ }
++
++ mutex_unlock(&priv->mac_lock);
++
+ if (pause->autoneg)
+ return -EOPNOTSUPP;
+
+@@ -307,8 +339,12 @@ static void dpaa2_eth_get_ethtool_stats(
+ }
+ *(data + i++) = buf_cnt;
+
++ mutex_lock(&priv->mac_lock);
++
+ if (dpaa2_eth_has_mac(priv))
+ dpaa2_mac_get_ethtool_stats(priv->mac, data + i);
++
++ mutex_unlock(&priv->mac_lock);
+ }
+
+ static int dpaa2_eth_prep_eth_rule(struct ethhdr *eth_value, struct ethhdr *eth_mask,
--- /dev/null
+From 80d12452a5f160c39d63efc1be07df36f9d07133 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:20 +0200
+Subject: [PATCH 13/14] net: dpaa2-switch: serialize changes to priv->mac with
+ a mutex
+
+The dpaa2-switch driver uses a DPMAC in the same way as the dpaa2-eth
+driver, so we need to duplicate the locking solution established by the
+previous change to the switch driver as well.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ .../freescale/dpaa2/dpaa2-switch-ethtool.c | 32 +++++++++++++++----
+ .../ethernet/freescale/dpaa2/dpaa2-switch.c | 31 ++++++++++++++++--
+ .../ethernet/freescale/dpaa2/dpaa2-switch.h | 2 ++
+ 3 files changed, 55 insertions(+), 10 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
+@@ -60,11 +60,18 @@ dpaa2_switch_get_link_ksettings(struct n
+ {
+ struct ethsw_port_priv *port_priv = netdev_priv(netdev);
+ struct dpsw_link_state state = {0};
+- int err = 0;
++ int err;
+
+- if (dpaa2_switch_port_is_type_phy(port_priv))
+- return phylink_ethtool_ksettings_get(port_priv->mac->phylink,
+- link_ksettings);
++ mutex_lock(&port_priv->mac_lock);
++
++ if (dpaa2_switch_port_is_type_phy(port_priv)) {
++ err = phylink_ethtool_ksettings_get(port_priv->mac->phylink,
++ link_ksettings);
++ mutex_unlock(&port_priv->mac_lock);
++ return err;
++ }
++
++ mutex_unlock(&port_priv->mac_lock);
+
+ err = dpsw_if_get_link_state(port_priv->ethsw_data->mc_io, 0,
+ port_priv->ethsw_data->dpsw_handle,
+@@ -99,9 +106,16 @@ dpaa2_switch_set_link_ksettings(struct n
+ bool if_running;
+ int err = 0, ret;
+
+- if (dpaa2_switch_port_is_type_phy(port_priv))
+- return phylink_ethtool_ksettings_set(port_priv->mac->phylink,
+- link_ksettings);
++ mutex_lock(&port_priv->mac_lock);
++
++ if (dpaa2_switch_port_is_type_phy(port_priv)) {
++ err = phylink_ethtool_ksettings_set(port_priv->mac->phylink,
++ link_ksettings);
++ mutex_unlock(&port_priv->mac_lock);
++ return err;
++ }
++
++ mutex_unlock(&port_priv->mac_lock);
+
+ /* Interface needs to be down to change link settings */
+ if_running = netif_running(netdev);
+@@ -189,8 +203,12 @@ static void dpaa2_switch_ethtool_get_sta
+ dpaa2_switch_ethtool_counters[i].name, err);
+ }
+
++ mutex_lock(&port_priv->mac_lock);
++
+ if (dpaa2_switch_port_has_mac(port_priv))
+ dpaa2_mac_get_ethtool_stats(port_priv->mac, data + i);
++
++ mutex_unlock(&port_priv->mac_lock);
+ }
+
+ const struct ethtool_ops dpaa2_switch_port_ethtool_ops = {
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
+@@ -603,8 +603,11 @@ static int dpaa2_switch_port_link_state_
+
+ /* When we manage the MAC/PHY using phylink there is no need
+ * to manually update the netif_carrier.
++ * We can avoid locking because we are called from the "link changed"
++ * IRQ handler, which is the same as the "endpoint changed" IRQ handler
++ * (the writer to port_priv->mac), so we cannot race with it.
+ */
+- if (dpaa2_switch_port_is_type_phy(port_priv))
++ if (dpaa2_mac_is_type_phy(port_priv->mac))
+ return 0;
+
+ /* Interrupts are received even though no one issued an 'ifconfig up'
+@@ -684,6 +687,8 @@ static int dpaa2_switch_port_open(struct
+ struct ethsw_core *ethsw = port_priv->ethsw_data;
+ int err;
+
++ mutex_lock(&port_priv->mac_lock);
++
+ if (!dpaa2_switch_port_is_type_phy(port_priv)) {
+ /* Explicitly set carrier off, otherwise
+ * netif_carrier_ok() will return true and cause 'ip link show'
+@@ -697,6 +702,7 @@ static int dpaa2_switch_port_open(struct
+ port_priv->ethsw_data->dpsw_handle,
+ port_priv->idx);
+ if (err) {
++ mutex_unlock(&port_priv->mac_lock);
+ netdev_err(netdev, "dpsw_if_enable err %d\n", err);
+ return err;
+ }
+@@ -706,6 +712,8 @@ static int dpaa2_switch_port_open(struct
+ if (dpaa2_switch_port_is_type_phy(port_priv))
+ dpaa2_mac_start(port_priv->mac);
+
++ mutex_unlock(&port_priv->mac_lock);
++
+ return 0;
+ }
+
+@@ -715,6 +723,8 @@ static int dpaa2_switch_port_stop(struct
+ struct ethsw_core *ethsw = port_priv->ethsw_data;
+ int err;
+
++ mutex_lock(&port_priv->mac_lock);
++
+ if (dpaa2_switch_port_is_type_phy(port_priv)) {
+ dpaa2_mac_stop(port_priv->mac);
+ } else {
+@@ -722,6 +732,8 @@ static int dpaa2_switch_port_stop(struct
+ netif_carrier_off(netdev);
+ }
+
++ mutex_unlock(&port_priv->mac_lock);
++
+ err = dpsw_if_disable(port_priv->ethsw_data->mc_io, 0,
+ port_priv->ethsw_data->dpsw_handle,
+ port_priv->idx);
+@@ -1461,7 +1473,9 @@ static int dpaa2_switch_port_connect_mac
+ }
+ }
+
++ mutex_lock(&port_priv->mac_lock);
+ port_priv->mac = mac;
++ mutex_unlock(&port_priv->mac_lock);
+
+ return 0;
+
+@@ -1474,9 +1488,12 @@ err_free_mac:
+
+ static void dpaa2_switch_port_disconnect_mac(struct ethsw_port_priv *port_priv)
+ {
+- struct dpaa2_mac *mac = port_priv->mac;
++ struct dpaa2_mac *mac;
+
++ mutex_lock(&port_priv->mac_lock);
++ mac = port_priv->mac;
+ port_priv->mac = NULL;
++ mutex_unlock(&port_priv->mac_lock);
+
+ if (!mac)
+ return;
+@@ -1495,6 +1512,7 @@ static irqreturn_t dpaa2_switch_irq0_han
+ struct ethsw_port_priv *port_priv;
+ u32 status = ~0;
+ int err, if_id;
++ bool had_mac;
+
+ err = dpsw_get_irq_status(ethsw->mc_io, 0, ethsw->dpsw_handle,
+ DPSW_IRQ_INDEX_IF, &status);
+@@ -1513,7 +1531,12 @@ static irqreturn_t dpaa2_switch_irq0_han
+
+ if (status & DPSW_IRQ_EVENT_ENDPOINT_CHANGED) {
+ rtnl_lock();
+- if (dpaa2_switch_port_has_mac(port_priv))
++ /* We can avoid locking because the "endpoint changed" IRQ
++ * handler is the only one who changes priv->mac at runtime,
++ * so we are not racing with anyone.
++ */
++ had_mac = !!port_priv->mac;
++ if (had_mac)
+ dpaa2_switch_port_disconnect_mac(port_priv);
+ else
+ dpaa2_switch_port_connect_mac(port_priv);
+@@ -3249,6 +3272,8 @@ static int dpaa2_switch_probe_port(struc
+ port_priv->netdev = port_netdev;
+ port_priv->ethsw_data = ethsw;
+
++ mutex_init(&port_priv->mac_lock);
++
+ port_priv->idx = port_idx;
+ port_priv->stp_state = BR_STATE_FORWARDING;
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
+@@ -161,6 +161,8 @@ struct ethsw_port_priv {
+
+ struct dpaa2_switch_filter_block *filter_block;
+ struct dpaa2_mac *mac;
++ /* Protects against changes to port_priv->mac */
++ struct mutex mac_lock;
+ };
+
+ /* Switch data */
--- /dev/null
+From 4ea2faf5bb13d9ba9f07e996d495c4cbe34a4236 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:21 +0200
+Subject: [PATCH 14/14] net: dpaa2-mac: move rtnl_lock() only around
+ phylink_{,dis}connect_phy()
+
+After the introduction of a private mac_lock that serializes access to
+priv->mac (and port_priv->mac in the switch), the only remaining purpose
+of rtnl_lock() is to satisfy the locking requirements of
+phylink_fwnode_phy_connect() and phylink_disconnect_phy().
+
+But the functions these live in, dpaa2_mac_connect() and
+dpaa2_mac_disconnect(), have contradictory locking requirements.
+While phylink_fwnode_phy_connect() wants rtnl_lock() to be held,
+phylink_create() wants it to not be held.
+
+Move the rtnl_lock() from top-level (in the dpaa2-eth and dpaa2-switch
+drivers) to only surround the phylink calls that require it, in the
+dpaa2-mac library code.
+
+This is possible because dpaa2_mac_connect() and dpaa2_mac_disconnect()
+run unlocked, and there isn't any danger of an AB/BA deadlock between
+the rtnl_mutex and other private locks.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 4 ----
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 5 +++++
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c | 4 ----
+ 3 files changed, 5 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+@@ -4530,7 +4530,6 @@ static irqreturn_t dpni_irq0_handler_thr
+ dpaa2_eth_set_mac_addr(netdev_priv(net_dev));
+ dpaa2_eth_update_tx_fqids(priv);
+
+- rtnl_lock();
+ /* We can avoid locking because the "endpoint changed" IRQ
+ * handler is the only one who changes priv->mac at runtime,
+ * so we are not racing with anyone.
+@@ -4540,7 +4539,6 @@ static irqreturn_t dpni_irq0_handler_thr
+ dpaa2_eth_disconnect_mac(priv);
+ else
+ dpaa2_eth_connect_mac(priv);
+- rtnl_unlock();
+ }
+
+ return IRQ_HANDLED;
+@@ -4859,9 +4857,7 @@ static int dpaa2_eth_remove(struct fsl_m
+ else
+ fsl_mc_free_irqs(ls_dev);
+
+- rtnl_lock();
+ dpaa2_eth_disconnect_mac(priv);
+- rtnl_unlock();
+ dpaa2_eth_free_rings(priv);
+ free_percpu(priv->fd);
+ free_percpu(priv->sgt_cache);
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+@@ -428,7 +428,9 @@ int dpaa2_mac_connect(struct dpaa2_mac *
+ }
+ mac->phylink = phylink;
+
++ rtnl_lock();
+ err = phylink_fwnode_phy_connect(mac->phylink, dpmac_node, 0);
++ rtnl_unlock();
+ if (err) {
+ netdev_err(net_dev, "phylink_fwnode_phy_connect() = %d\n", err);
+ goto err_phylink_destroy;
+@@ -446,7 +448,10 @@ err_pcs_destroy:
+
+ void dpaa2_mac_disconnect(struct dpaa2_mac *mac)
+ {
++ rtnl_lock();
+ phylink_disconnect_phy(mac->phylink);
++ rtnl_unlock();
++
+ phylink_destroy(mac->phylink);
+ dpaa2_pcs_destroy(mac);
+ of_phy_put(mac->serdes_phy);
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
+@@ -1530,7 +1530,6 @@ static irqreturn_t dpaa2_switch_irq0_han
+ }
+
+ if (status & DPSW_IRQ_EVENT_ENDPOINT_CHANGED) {
+- rtnl_lock();
+ /* We can avoid locking because the "endpoint changed" IRQ
+ * handler is the only one who changes priv->mac at runtime,
+ * so we are not racing with anyone.
+@@ -1540,7 +1539,6 @@ static irqreturn_t dpaa2_switch_irq0_han
+ dpaa2_switch_port_disconnect_mac(port_priv);
+ else
+ dpaa2_switch_port_connect_mac(port_priv);
+- rtnl_unlock();
+ }
+
+ out:
+@@ -2951,9 +2949,7 @@ static void dpaa2_switch_remove_port(str
+ {
+ struct ethsw_port_priv *port_priv = ethsw->ports[port_idx];
+
+- rtnl_lock();
+ dpaa2_switch_port_disconnect_mac(port_priv);
+- rtnl_unlock();
+ free_netdev(port_priv->netdev);
+ ethsw->ports[port_idx] = NULL;
+ }
projects / openwrt / staging / stintel.git / commitdiff