endchoice
+config KEXEC
+ bool "Kexec system call (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is indepedent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ The name comes from the similiarity to the exec system call.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you. It may help to enable device hotplugging
+ support. As of this writing the exact hardware interface is
+ strongly in flux, so no good recommendation can be made.
+
source "arch/mips/ddb5xxx/Kconfig"
source "arch/mips/gt64120/ev64120/Kconfig"
source "arch/mips/jazz/Kconfig"
obj-$(CONFIG_I8253) += i8253.o
+obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
+
CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
EXTRA_AFLAGS := $(CFLAGS)
--- /dev/null
+/*
+ * machine_kexec.c for kexec
+ * Created by <nschichan@corp.free.fr> on Thu Oct 12 15:15:06 2006
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#include <linux/kexec.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+
+const extern unsigned char relocate_new_kernel[];
+const extern unsigned int relocate_new_kernel_size;
+
+extern unsigned long kexec_start_address;
+extern unsigned long kexec_indirection_page;
+
+int
+machine_kexec_prepare(struct kimage *kimage)
+{
+ return 0;
+}
+
+void
+machine_kexec_cleanup(struct kimage *kimage)
+{
+}
+
+void
+machine_shutdown(void)
+{
+}
+
+void
+machine_crash_shutdown(struct pt_regs *regs)
+{
+}
+
+void
+machine_kexec(struct kimage *image)
+{
+ unsigned long reboot_code_buffer;
+ unsigned long entry;
+ unsigned long *ptr;
+
+ reboot_code_buffer =
+ (unsigned long)page_address(image->control_code_page);
+
+ kexec_start_address = image->start;
+ kexec_indirection_page = phys_to_virt(image->head & PAGE_MASK);
+
+ memcpy((void*)reboot_code_buffer, relocate_new_kernel,
+ relocate_new_kernel_size);
+
+ /*
+ * The generic kexec code builds a page list with physical
+ * addresses. they are directly accessible through KSEG0 (or
+ * CKSEG0 or XPHYS if on 64bit system), hence the
+ * pys_to_virt() call.
+ */
+ for (ptr = &image->head; (entry = *ptr) && !(entry &IND_DONE);
+ ptr = (entry & IND_INDIRECTION) ?
+ phys_to_virt(entry & PAGE_MASK) : ptr + 1) {
+ if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION ||
+ *ptr & IND_DESTINATION)
+ *ptr = phys_to_virt(*ptr);
+ }
+
+ /*
+ * we do not want to be bothered.
+ */
+ local_irq_disable();
+
+ flush_icache_range(reboot_code_buffer,
+ reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
+
+ printk("Will call new kernel at %08x\n", image->start);
+ printk("Bye ...\n");
+ flush_cache_all();
+ ((void (*)(void))reboot_code_buffer)();
+}
--- /dev/null
+/*
+ * relocate_kernel.S for kexec
+ * Created by <nschichan@corp.free.fr> on Thu Oct 12 17:49:57 2006
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#include <asm/asm.h>
+#include <asm/asmmacro.h>
+#include <asm/regdef.h>
+#include <asm/page.h>
+#include <asm/mipsregs.h>
+#include <asm/stackframe.h>
+#include <asm/addrspace.h>
+
+ .globl relocate_new_kernel
+relocate_new_kernel:
+
+ PTR_L s0, kexec_indirection_page
+ PTR_L s1, kexec_start_address
+
+process_entry:
+ PTR_L s2, (s0)
+ PTR_ADD s0, s0, SZREG
+
+ /* destination page */
+ and s3, s2, 0x1
+ beq s3, zero, 1f
+ and s4, s2, ~0x1 /* store destination addr in s4 */
+ move a0, s4
+ b process_entry
+
+1:
+ /* indirection page, update s0 */
+ and s3, s2, 0x2
+ beq s3, zero, 1f
+ and s0, s2, ~0x2
+ b process_entry
+
+1:
+ /* done page */
+ and s3, s2, 0x4
+ beq s3, zero, 1f
+ b done
+1:
+ /* source page */
+ and s3, s2, 0x8
+ beq s3, zero, process_entry
+ and s2, s2, ~0x8
+ li s6, (1 << PAGE_SHIFT) / SZREG
+
+copy_word:
+ /* copy page word by word */
+ REG_L s5, (s2)
+ REG_S s5, (s4)
+ INT_ADD s4, s4, SZREG
+ INT_ADD s2, s2, SZREG
+ INT_SUB s6, s6, 1
+ beq s6, zero, process_entry
+ b copy_word
+ b process_entry
+
+done:
+ /* jump to kexec_start_address */
+ j s1
+
+ .globl kexec_start_address
+kexec_start_address:
+ .long 0x0
+
+ .globl kexec_indirection_page
+kexec_indirection_page:
+ .long 0x0
+
+relocate_new_kernel_end:
+
+ .globl relocate_new_kernel_size
+relocate_new_kernel_size:
+ .long relocate_new_kernel_end - relocate_new_kernel
sys sys_move_pages 6
sys sys_set_robust_list 2
sys sys_get_robust_list 3 /* 4310 */
- sys sys_ni_syscall 0
+ sys sys_kexec_load 4
sys sys_getcpu 3
sys sys_epoll_pwait 6
.endm
PTR sys_move_pages
PTR sys_set_robust_list
PTR sys_get_robust_list
- PTR sys_ni_syscall /* 5270 */
+ PTR sys_kexec_load /* 5270 */
PTR sys_getcpu
PTR sys_epoll_pwait
PTR sys_move_pages
PTR compat_sys_set_robust_list
PTR compat_sys_get_robust_list
- PTR sys_ni_syscall
+ PTR compat_sys_kexec_load
PTR sys_getcpu
PTR sys_epoll_pwait
PTR compat_sys_move_pages
PTR compat_sys_set_robust_list
PTR compat_sys_get_robust_list /* 4310 */
- PTR sys_ni_syscall
+ PTR compat_sys_kexec_load
PTR sys_getcpu
PTR sys_epoll_pwait
.size sys_call_table,.-sys_call_table
--- /dev/null
+/*
+ * kexec.h for kexec
+ * Created by <nschichan@corp.free.fr> on Thu Oct 12 14:59:34 2006
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#ifndef _MIPS_KEXEC
+# define _MIPS_KEXEC
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (0x20000000)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (0x20000000)
+ /* Maximum address we can use for the control code buffer */
+#define KEXEC_CONTROL_MEMORY_LIMIT (0x20000000)
+
+#define KEXEC_CONTROL_CODE_SIZE 4096
+
+/* The native architecture */
+#define KEXEC_ARCH KEXEC_ARCH_MIPS
+
+#define MAX_NOTE_BYTES 1024
+
+static inline void crash_setup_regs(struct pt_regs *newregs,
+ struct pt_regs *oldregs)
+{
+ /* Dummy implementation for now */
+}
+
+#endif /* !_MIPS_KEXEC */
#define KEXEC_ARCH_IA_64 (50 << 16)
#define KEXEC_ARCH_S390 (22 << 16)
#define KEXEC_ARCH_SH (42 << 16)
+#define KEXEC_ARCH_MIPS_LE (10 << 16)
+#define KEXEC_ARCH_MIPS ( 8 << 16)
#define KEXEC_FLAGS (KEXEC_ON_CRASH) /* List of defined/legal kexec flags */
projects / openwrt / staging / blogic.git / commitdiff