bullet-m | rocket-m | nano-m)
status_led="ubnt:green:link4"
;;
+ dir-600-a1)
+ status_led="dir-600-a1:green:power"
+ ;;
dir-615-c1)
status_led="dir-615c1:green:status"
;;
*AW-NR580)
name="aw-nr580"
;;
+ *"DIR-600 rev. A1")
+ name="dir-600-a1"
+ ;;
*"DIR-825 rev. B1")
name="dir-825-b1"
;;
[ "$ARGC" -gt 1 ] && return 1
case "$board" in
- ap81 | ap83 | dir-615-c1 | dir-825-b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt-400n | bullet-m | nano-m | rocket-m)
+ ap81 | ap83 | dir-600-a1 | dir-615-c1 | dir-825-b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt-400n | bullet-m | nano-m | rocket-m)
[ "$magic" != "2705" ] && {
echo "Invalid image type."
return 1
CONFIG_AR71XX_MACH_AP81=y
CONFIG_AR71XX_MACH_AP83=y
CONFIG_AR71XX_MACH_AW_NR580=y
+CONFIG_AR71XX_MACH_DIR_600_A1=y
CONFIG_AR71XX_MACH_DIR_615_C1=y
CONFIG_AR71XX_MACH_DIR_825_B1=y
CONFIG_AR71XX_MACH_GENERIC=y
CONFIG_AR71XX_MACH_AP81=y
CONFIG_AR71XX_MACH_AP83=y
CONFIG_AR71XX_MACH_AW_NR580=y
+CONFIG_AR71XX_MACH_DIR_600_A1=y
CONFIG_AR71XX_MACH_DIR_615_C1=y
CONFIG_AR71XX_MACH_DIR_825_B1=y
CONFIG_AR71XX_MACH_GENERIC=y
CONFIG_AR71XX_MACH_AP81=y
CONFIG_AR71XX_MACH_AP83=y
CONFIG_AR71XX_MACH_AW_NR580=y
+CONFIG_AR71XX_MACH_DIR_600_A1=y
CONFIG_AR71XX_MACH_DIR_615_C1=y
CONFIG_AR71XX_MACH_DIR_825_B1=y
CONFIG_AR71XX_MACH_GENERIC=y
select AR71XX_DEV_USB
default n
+config AR71XX_MACH_DIR_600_A1
+ bool "D-Link DIR-600 rev. A1 support"
+ select AR71XX_DEV_AP91_PCI if PCI
+ select AR71XX_DEV_M25P80
+ select AR71XX_DEV_GPIO_BUTTONS
+ select AR71XX_DEV_LEDS_GPIO
+ default n
+
config AR71XX_MACH_DIR_615_C1
bool "D-Link DIR-615 rev. C1 support"
select AR71XX_DEV_M25P80
obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o
obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o
obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o
+obj-$(CONFIG_AR71XX_MACH_DIR_600_A1) += mach-dir-600-a1.o
obj-$(CONFIG_AR71XX_MACH_DIR_615_C1) += mach-dir-615-c1.o
obj-$(CONFIG_AR71XX_MACH_DIR_825_B1) += mach-dir-825-b1.o
obj-$(CONFIG_AR71XX_MACH_GENERIC) += mach-generic.o
--- /dev/null
+/*
+ * D-Link DIR-600 rev. A1 board support
+ *
+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+
+#define DIR_600_A1_GPIO_LED_WPS 0
+#define DIR_600_A1_GPIO_LED_POWER_AMBER 1
+#define DIR_600_A1_GPIO_LED_POWER_GREEN 6
+
+#define DIR_600_A1_GPIO_BTN_RESET 8
+#define DIR_600_A1_GPIO_BTN_WPS 12
+
+#define DIR_600_A1_BUTTONS_POLL_INTERVAL 20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition dir_600_a1_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x030000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "nvram",
+ .offset = 0x030000,
+ .size = 0x010000,
+ }, {
+ .name = "kernel",
+ .offset = 0x040000,
+ .size = 0x0e0000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x120000,
+ .size = 0x2c0000,
+ }, {
+ .name = "mac",
+ .offset = 0x3e0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "art",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x040000,
+ .size = 0x3a0000,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data dir_600_a1_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+ .parts = dir_600_a1_partitions,
+ .nr_parts = ARRAY_SIZE(dir_600_a1_partitions),
+#endif
+};
+
+static struct gpio_led dir_600_a1_leds_gpio[] __initdata = {
+ {
+ .name = "dir-600-a1:green:power",
+ .gpio = DIR_600_A1_GPIO_LED_POWER_GREEN,
+ }, {
+ .name = "dir-600-a1:amber:power",
+ .gpio = DIR_600_A1_GPIO_LED_POWER_AMBER,
+ }, {
+ .name = "dir-600-a1:blue:wps",
+ .gpio = DIR_600_A1_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_button dir_600_a1_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .threshold = 5,
+ .gpio = DIR_600_A1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .threshold = 5,
+ .gpio = DIR_600_A1_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init dir_600_a1_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ar71xx_set_mac_base(mac);
+ ar71xx_add_device_mdio(0x0);
+
+ /* WAN port */
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth0_data.phy_mask = 0x0;
+ ar71xx_eth0_data.speed = SPEED_100;
+ ar71xx_eth0_data.duplex = DUPLEX_FULL;
+ ar71xx_eth0_data.fifo_cfg1 = 0x0fff0000;
+ ar71xx_eth0_data.fifo_cfg2 = 0x00001fff;
+ ar71xx_eth0_data.fifo_cfg3 = 0x008001ff;
+
+ /* LAN ports */
+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth1_data.phy_mask = 0x0;
+ ar71xx_eth1_data.speed = SPEED_1000;
+ ar71xx_eth1_data.duplex = DUPLEX_FULL;
+ ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000;
+ ar71xx_eth1_data.fifo_cfg2 = 0x00001fff;
+ ar71xx_eth1_data.fifo_cfg3 = 0x008001ff;
+
+ ar71xx_add_device_eth(1);
+ ar71xx_add_device_eth(0);
+
+ ar71xx_add_device_m25p80(&dir_600_a1_flash_data);
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio),
+ dir_600_a1_leds_gpio);
+
+ ar71xx_add_device_gpio_buttons(-1, DIR_600_A1_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(dir_600_a1_gpio_buttons),
+ dir_600_a1_gpio_buttons);
+
+ ap91_pci_init(ee, NULL);
+}
+
+MIPS_MACHINE(AR71XX_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1",
+ dir_600_a1_setup);
/*
* Atheros AR71xx machine type definitions
*
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
AR71XX_MACH_AP81, /* Atheros AP81 */
AR71XX_MACH_AP83, /* Atheros AP83 */
AR71XX_MACH_AW_NR580, /* AzureWave AW-NR580 */
+ AR71XX_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
AR71XX_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
AR71XX_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
AR71XX_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
fi; fi
endef
+dir600a1_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,896k(kernel),2816k(rootfs),64k(mac)ro,64k(art)ro,3712k@0x40000(firmware)
+define Image/Build/DIR600A1
+ $(call PatchKernelLzma,$(2),$(3) $(dir600a1_mtdlayout))
+ if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 917504 ]; then \
+ echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+ else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 2818048 ]; then \
+ echo "Warning: $(KDIR)/root.$(1) is too big"; \
+ else \
+ mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
+ 0x80060000 \
+ -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+ -d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
+ ( \
+ dd if=$(KDIR)/vmlinux-$(2).uImage bs=896k conv=sync; \
+ dd if=$(KDIR)/root.$(1) bs=2752k conv=sync; \
+ echo -n "AP91-AR7240-RT-090223-00"; \
+ ) > $(call imgname,$(1),$(2))-universal.bin; \
+ fi; fi
+endef
+
dir825b1_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,1024k(kernel),5184k(rootfs),64k(caldata)ro,1600k(unknown)ro,6208k@0x50000(firmware)
define Image/Build/DIR825B1
$(call PatchKernelLzma,$(2),$(3) $(dir825b1_mtdlayout))
$(call Image/Build/Template/64k/$(1),MyLoader,wp543)
endef
+define Image/Build/Profile/DIR600A1
+ $(call Image/Build/Template/64k/$(1),DIR600A1,dir-600-a1,board=DIR-600-A1)
+endef
+
define Image/Build/Profile/DIR615C1
$(call Image/Build/Template/squashfs-only/$(1),Cameo,dir-615-c1,board=DIR-615-C1,"AP81-AR9130-RT-070614-02")
endef
$(call Image/Build/Profile/AP81,$(1))
$(call Image/Build/Profile/AP83,$(1))
$(call Image/Build/Profile/A02RBW300N,$(1))
+ $(call Image/Build/Profile/DIR600A1,$(1))
$(call Image/Build/Profile/DIR615C1,$(1))
$(call Image/Build/Profile/DIR825B1,$(1))
$(call Image/Build/Profile/MZKW04NU,$(1))
# See /LICENSE for more information.
#
+define Profile/DIR600A1
+ NAME:=D-Link DIR-600 rev. A1
+ PACKAGES:=kmod-ath9k hostapd-mini
+endef
+
+define Profile/DIR600A1/Description
+ Package set optimized for the D-Link DIR-600 rev. A1.
+endef
+
+$(eval $(call Profile,DIR600A1))
+
+
define Profile/DIR615C1
NAME:=D-Link DIR-615 rev. C1
PACKAGES:=kmod-ath9k hostapd-mini
projects / openwrt / staging / ynezz.git / commitdiff