+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011 Renesas Electronics Europe Ltd.
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu
- *
- * Based on board/renesas/rsk7203/lowlevel_init.S
- */
-#include <config.h>
-
-#include <asm/processor.h>
-#include <asm/macro.h>
-
- .global lowlevel_init
-
- .text
- .align 2
-
-lowlevel_init:
- /* Cache setting */
- write32 CCR1_A ,CCR1_D
-
- /* io_set_cpg */
- write8 STBCR3_A, STBCR3_D
- write8 STBCR4_A, STBCR4_D
- write8 STBCR5_A, STBCR5_D
- write8 STBCR6_A, STBCR6_D
- write8 STBCR7_A, STBCR7_D
- write8 STBCR8_A, STBCR8_D
-
- /* ConfigurePortPins */
-
- /* Leaving LED1 ON for sanity test */
- write16 PJCR1_A, PJCR1_D1
- write16 PJCR2_A, PJCR2_D
- write16 PJIOR0_A, PJIOR0_D1
- write16 PJDR0_A, PJDR0_D
- write16 PJPR0_A, PJPR0_D
-
- /* Configure EN_PIN & RS_PIN */
- write16 PGCR2_A, PGCR2_D
- write16 PGIOR0_A, PGIOR0_D
-
- /* Configure the port pins connected to UART */
- write16 PJCR1_A, PJCR1_D2
- write16 PJIOR0_A, PJIOR0_D2
-
- /* Configure Operating Frequency */
- write16 WTCSR_A, WTCSR_D0
- write16 WTCSR_A, WTCSR_D1
- write16 WTCNT_A, WTCNT_D
-
- /* Control of RESBANK */
- write16 IBNR_A, IBNR_D
- /* Enable SCIF3 module */
- write16 STBCR4_A, STBCR4_D
-
- /* Set clock mode*/
- write16 FRQCR_A, FRQCR_D
-
- /* Configure Bus And Memory */
-init_bsc_cs0:
-
-pfc_settings:
- write16 PCCR2_A, PCCR2_D
- write16 PCCR1_A, PCCR1_D
- write16 PCCR0_A, PCCR0_D
-
- write16 PBCR0_A, PBCR0_D
- write16 PBCR1_A, PBCR1_D
- write16 PBCR2_A, PBCR2_D
- write16 PBCR3_A, PBCR3_D
- write16 PBCR4_A, PBCR4_D
- write16 PBCR5_A, PBCR5_D
-
- write16 PDCR0_A, PDCR0_D
- write16 PDCR1_A, PDCR1_D
- write16 PDCR2_A, PDCR2_D
- write16 PDCR3_A, PDCR3_D
-
- write32 CS0WCR_A, CS0WCR_D
- write32 CS0BCR_A, CS0BCR_D
-
-init_bsc_cs2:
- write16 PJCR0_A, PJCR0_D
- write32 CS2WCR_A, CS2WCR_D
-
-init_sdram:
- write32 CS3BCR_A, CS3BCR_D
- write32 CS3WCR_A, CS3WCR_D
- write32 SDCR_A, SDCR_D
- write32 RTCOR_A, RTCOR_D
- write32 RTCSR_A, RTCSR_D
-
- /* wait 200us */
- mov.l REPEAT_D, r3
- mov #0, r2
-repeat0:
- add #1, r2
- cmp/hs r3, r2
- bf repeat0
- nop
-
- mov.l SDRAM_MODE, r1
- mov #0, r0
- mov.l r0, @r1
-
- nop
- rts
-
- .align 4
-
-CCR1_A: .long CCR1
-CCR1_D: .long 0x0000090B
-FRQCR_A: .long 0xFFFE0010
-FRQCR_D: .word 0x1003
-.align 2
-STBCR3_A: .long 0xFFFE0408
-STBCR3_D: .long 0x00000002
-STBCR4_A: .long 0xFFFE040C
-STBCR4_D: .word 0x0000
-.align 2
-STBCR5_A: .long 0xFFFE0410
-STBCR5_D: .long 0x00000010
-STBCR6_A: .long 0xFFFE0414
-STBCR6_D: .long 0x00000002
-STBCR7_A: .long 0xFFFE0418
-STBCR7_D: .long 0x0000002A
-STBCR8_A: .long 0xFFFE041C
-STBCR8_D: .long 0x0000007E
-PJCR1_A: .long 0xFFFE390C
-PJCR1_D1: .word 0x0000
-PJCR1_D2: .word 0x0022
-PJCR2_A: .long 0xFFFE390A
-PJCR2_D: .word 0x0000
-.align 2
-PJIOR0_A: .long 0xFFFE3912
-PJIOR0_D1: .word 0x0FC0
-PJIOR0_D2: .word 0x0FE0
-PJDR0_A: .long 0xFFFE3916
-PJDR0_D: .word 0x0FBF
-.align 2
-PJPR0_A: .long 0xFFFE391A
-PJPR0_D: .long 0x00000FBF
-PGCR2_A: .long 0xFFFE38CA
-PGCR2_D: .word 0x0000
-.align 2
-PGIOR0_A: .long 0xFFFE38D2
-PGIOR0_D: .word 0x03F0
-.align 2
-WTCSR_A: .long 0xFFFE0000
-WTCSR_D0: .word 0x0000
-WTCSR_D1: .word 0x0000
-WTCNT_A: .long 0xFFFE0002
-WTCNT_D: .word 0x0000
-.align 2
-PCCR0_A: .long 0xFFFE384E
-PDCR0_A: .long 0xFFFE386E
-PDCR1_A: .long 0xFFFE386C
-PDCR2_A: .long 0xFFFE386A
-PDCR3_A: .long 0xFFFE3868
-PBCR0_A: .long 0xFFFE382E
-PBCR1_A: .long 0xFFFE382C
-PBCR2_A: .long 0xFFFE382A
-PBCR3_A: .long 0xFFFE3828
-PBCR4_A: .long 0xFFFE3826
-PBCR5_A: .long 0xFFFE3824
-PCCR0_D: .word 0x1111
-PDCR0_D: .word 0x1111
-PDCR1_D: .word 0x1111
-PDCR2_D: .word 0x1111
-PDCR3_D: .word 0x1111
-PBCR0_D: .word 0x1110
-PBCR1_D: .word 0x1111
-PBCR2_D: .word 0x1111
-PBCR3_D: .word 0x1111
-PBCR4_D: .word 0x1111
-PBCR5_D: .word 0x0111
-.align 2
-CS0WCR_A: .long 0xFFFC0028
-CS0WCR_D: .long 0x00000B41
-CS0BCR_A: .long 0xFFFC0004
-CS0BCR_D: .long 0x10000400
-PJCR0_A: .long 0xFFFE390E
-PJCR0_D: .word 0x3300
-.align 2
-CS2WCR_A: .long 0xFFFC0030
-CS2WCR_D: .long 0x00000B01
-PCCR2_A: .long 0xFFFE384A
-PCCR2_D: .word 0x0001
-.align 2
-PCCR1_A: .long 0xFFFE384C
-PCCR1_D: .word 0x1111
-.align 2
-CS3BCR_A: .long 0xFFFC0010
-CS3BCR_D: .long 0x00004400
-CS3WCR_A: .long 0xFFFC0034
-CS3WCR_D: .long 0x0000288A
-SDCR_A: .long 0xFFFC004C
-SDCR_D: .long 0x00000812
-RTCOR_A: .long 0xFFFC0058
-RTCOR_D: .long 0xA55A0046
-RTCSR_A: .long 0xFFFC0050
-RTCSR_D: .long 0xA55A0010
-IBNR_A: .long 0xFFFE080E
-IBNR_D: .word 0x0000
-.align 2
-SDRAM_MODE: .long 0xFFFC5040
-REPEAT_D: .long 0x00000085
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2011 Renesas Electronics Europe Ltd.
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu
- *
- * Based on u-boot/board/rsk7264/rsk7203.c
- */
-
-#include <common.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-int checkboard(void)
-{
- puts("BOARD: Renesas Technology RSK7264\n");
- return 0;
-}
-
-int board_init(void)
-{
- return 0;
-}
-
-void led_set_state(unsigned short value)
-{
-}
-
-/*
- * The RSK board has the SMSC89218 wired up 'incorrectly'.
- * Byte-swapping is necessary, and so poor performance is inevitable.
- * This problem cannot evade by the swap function of CHIP, this can
- * evade by software Byte-swapping.
- * And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
- * functions necessary to solve this problem.
- */
-u32 pkt_data_pull(struct eth_device *dev, u32 addr)
-{
- volatile u16 *addr_16 = (u16 *)(dev->iobase + addr);
- return (u32)((swab16(*addr_16) << 16) & 0xFFFF0000)\
- | swab16(*(addr_16 + 1));
-}
-
-void pkt_data_push(struct eth_device *dev, u32 addr, u32 val)
-{
- addr += dev->iobase;
- *(volatile u16 *)(addr + 2) = swab16((u16)val);
- *(volatile u16 *)(addr) = swab16((u16)(val >> 16));
-}
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC911X
- rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
- return rc;
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Renesas RSK2+SH7264 board
- *
- * Copyright (C) 2011 Renesas Electronics Europe Ltd.
- * Copyright (C) 2008 Nobuhiro Iwamatsu
- * Copyright (C) 2008 Renesas Solutions Corp.
- */
-
-#ifndef __RSK7264_H
-#define __RSK7264_H
-
-#define CONFIG_CPU_SH7264 1
-
-#define CONFIG_DISPLAY_BOARDINFO
-
-#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
-
-#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */
-
-/* Serial */
-#define CONFIG_CONS_SCIF3 1
-
-/* Memory */
-/* u-boot relocated to top 256KB of ram */
-#define CONFIG_SYS_SDRAM_BASE 0x0C000000
-#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024)
-
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000)
-#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
-#define CONFIG_SYS_MONITOR_LEN (128 * 1024)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4*1024*1024)
-
-/* Flash */
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#define CONFIG_SYS_FLASH_BASE 0x20000000 /* Non-cached */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 512
-
-#define CONFIG_ENV_OFFSET (128 * 1024)
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SECT_SIZE (128 * 1024)
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-
-/* Board Clock */
-#define CONFIG_SYS_CLK_FREQ 36000000
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
-#define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */
-#define CONFIG_SH_CMT_CLK_FREQ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
-
-#endif /* __RSK7264_H */
projects / project / bcm63xx / u-boot.git / commitdiff