Based on a patch from Shailendra Govardhan <shailen@marvell.com>.
This patch allows implementation of more specific wake-on-lan rules than those
of ethtool.
Please note that only firmware 5.110.22.p20 and above supports this feature.
This patch only implements the driver/firmware interface, not the
userspace/driver interface.
Signed-off-by: Anna Neal <anna@cozybit.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
return ret;
}
-int lbs_host_sleep_cfg(struct lbs_private *priv, uint32_t criteria)
+int lbs_host_sleep_cfg(struct lbs_private *priv, uint32_t criteria,
+ struct wol_config *p_wol_config)
{
struct cmd_ds_host_sleep cmd_config;
int ret;
cmd_config.gpio = priv->wol_gpio;
cmd_config.gap = priv->wol_gap;
+ if (p_wol_config != NULL)
+ memcpy((uint8_t *)&cmd_config.wol_conf, (uint8_t *)p_wol_config,
+ sizeof(struct wol_config));
+ else
+ cmd_config.wol_conf.action = CMD_ACT_ACTION_NONE;
+
ret = lbs_cmd_with_response(priv, CMD_802_11_HOST_SLEEP_CFG, &cmd_config);
if (!ret) {
- lbs_deb_cmd("Set WOL criteria to %x\n", criteria);
- priv->wol_criteria = criteria;
+ if (criteria) {
+ lbs_deb_cmd("Set WOL criteria to %x\n", criteria);
+ priv->wol_criteria = criteria;
+ } else
+ memcpy((uint8_t *) p_wol_config,
+ (uint8_t *)&cmd_config.wol_conf,
+ sizeof(struct wol_config));
} else {
lbs_pr_info("HOST_SLEEP_CFG failed %d\n", ret);
}
uint16_t action, uint16_t type);
int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan);
-int lbs_host_sleep_cfg(struct lbs_private *priv, uint32_t criteria);
+int lbs_host_sleep_cfg(struct lbs_private *priv, uint32_t criteria,
+ struct wol_config *p_wol_config);
int lbs_suspend(struct lbs_private *priv);
void lbs_resume(struct lbs_private *priv);
#define EHS_WAKE_ON_MAC_EVENT 0x0004
#define EHS_WAKE_ON_MULTICAST_DATA 0x0008
#define EHS_REMOVE_WAKEUP 0xFFFFFFFF
+/* Wake rules for Host_Sleep_CFG command */
+#define WOL_RULE_NET_TYPE_INFRA_OR_IBSS 0x00
+#define WOL_RULE_NET_TYPE_MESH 0x10
+#define WOL_RULE_ADDR_TYPE_BCAST 0x01
+#define WOL_RULE_ADDR_TYPE_MCAST 0x08
+#define WOL_RULE_ADDR_TYPE_UCAST 0x02
+#define WOL_RULE_OP_AND 0x01
+#define WOL_RULE_OP_OR 0x02
+#define WOL_RULE_OP_INVALID 0xFF
+#define WOL_RESULT_VALID_CMD 0
+#define WOL_RESULT_NOSPC_ERR 1
+#define WOL_RESULT_EEXIST_ERR 2
/** Misc constants */
/* This section defines 802.11 specific contants */
if (wol->wolopts & WAKE_BCAST) criteria |= EHS_WAKE_ON_BROADCAST_DATA;
if (wol->wolopts & WAKE_PHY) criteria |= EHS_WAKE_ON_MAC_EVENT;
- return lbs_host_sleep_cfg(priv, criteria);
+ return lbs_host_sleep_cfg(priv, criteria, (struct wol_config *)NULL);
}
struct ethtool_ops lbs_ethtool_ops = {
CMD_ACT_FWT_ACCESS_TIME,
};
+/* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
+enum cmd_wol_cfg_opts {
+ CMD_ACT_ACTION_NONE = 0,
+ CMD_ACT_SET_WOL_RULE,
+ CMD_ACT_GET_WOL_RULE,
+ CMD_ACT_RESET_WOL_RULE,
+};
+
/* Define action or option for CMD_MESH_ACCESS */
enum cmd_mesh_access_opts {
CMD_ACT_MESH_GET_TTL = 1,
u8 key[32];
};
+#define MAX_WOL_RULES 16
+
+struct host_wol_rule {
+ uint8_t rule_no;
+ uint8_t rule_ops;
+ __le16 sig_offset;
+ __le16 sig_length;
+ __le16 reserve;
+ __be32 sig_mask;
+ __be32 signature;
+};
+
+struct wol_config {
+ uint8_t action;
+ uint8_t pattern;
+ uint8_t no_rules_in_cmd;
+ uint8_t result;
+ struct host_wol_rule rule[MAX_WOL_RULES];
+};
+
+
struct cmd_ds_host_sleep {
struct cmd_header hdr;
__le32 criteria;
uint8_t gpio;
- uint8_t gap;
+ uint16_t gap;
+ struct wol_config wol_conf;
} __attribute__ ((packed));
+
+
struct cmd_ds_802_11_key_material {
struct cmd_header hdr;
priv->wol_gpio = 2; /* Wake via GPIO2... */
priv->wol_gap = 20; /* ... after 20ms */
- lbs_host_sleep_cfg(priv, EHS_WAKE_ON_UNICAST_DATA);
+ lbs_host_sleep_cfg(priv, EHS_WAKE_ON_UNICAST_DATA,
+ (struct wol_config *) NULL);
wake_method.hdr.size = cpu_to_le16(sizeof(wake_method));
wake_method.action = cpu_to_le16(CMD_ACT_GET);