+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qca953x.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "ubnt,acb-isp", "qca,qca9533";
- model = "Ubiquiti airCube ISP";
-
- aliases {
- label-mac-device = &wmac;
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@40000 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x050000 0xf60000>;
- };
-
- partition@fb0000 {
- label = "cfg";
- reg = <0xfb0000 0x040000>;
- read-only;
- };
-
- art: partition@ff0000 {
- label = "art";
- reg = <0xff0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-ð0 {
- status = "okay";
-
- phy-handle = <&swphy4>;
-
- mtd-mac-address = <&art 0x0>;
-};
-
-ð1 {
- mtd-mac-address = <&art 0x6>;
-
- gmac-config {
- device = <&gmac>;
- };
-};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ubnt,aircube-isp", "qca,qca9533";
+ model = "Ubiquiti airCube ISP";
+
+ aliases {
+ label-mac-device = &wmac;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xf60000>;
+ };
+
+ partition@fb0000 {
+ label = "cfg";
+ reg = <0xfb0000 0x040000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x6>;
+
+ gmac-config {
+ device = <&gmac>;
+ };
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+};
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
;;
- ubnt,acb-isp)
+ ubnt,aircube-isp)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:1" "3:lan:3" "4:lan:2"
tplink,wbs510-v2)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20"
;;
+ubnt,aircube-isp)
+ ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "11"
+ ;;
ubnt,nanostation-ac)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "3"
;;
ubnt,nanostation-m-xw)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "2"
;;
-ubnt,acb-isp)
- ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "11"
- ;;
zbtlink,zbt-wd323)
ucidef_add_gpio_switch "io0" "IO#0" "0"
ucidef_add_gpio_switch "io1" "IO#1" "1"
UBNT_VERSION := 6.0.4
endef
-define Device/ubnt_acb-isp
+define Device/ubnt_aircube-isp
$(Device/ubnt)
SOC := qca9533
DEVICE_MODEL := airCube ISP
UBNT_CHIP := qca9533
UBNT_TYPE := ACB
UBNT_VERSION := 2.5.0
+ SUPPORTED_DEVICES += ubnt,acb-isp
endef
-TARGET_DEVICES += ubnt_acb-isp
+TARGET_DEVICES += ubnt_aircube-isp
define Device/ubnt_airrouter
$(Device/ubnt-xm)