* print link down message
* @adapter - pointer to the adapter structure
**/
-static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter* adapter)
+static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
struct ixgbe_hw *hw = &adapter->hw;
}
adapter->flags &= ~IXGBE_FLAG_IN_NETPOLL;
}
-#endif
+#endif
static struct rtnl_link_stats64 *ixgbe_get_stats64(struct net_device *netdev,
struct rtnl_link_stats64 *stats)
{
return;
}
-
/* ixgbe_setup_tc - routine to configure net_device for multiple traffic
* classes.
*
/* Hardware supports up to 8 traffic classes */
if (tc > adapter->dcb_cfg.num_tcs.pg_tcs ||
- (hw->mac.type == ixgbe_mac_82598EB && tc < MAX_TRAFFIC_CLASS))
+ (hw->mac.type == ixgbe_mac_82598EB &&
+ tc < MAX_TRAFFIC_CLASS))
return -EINVAL;
/* Hardware has to reinitialize queues and interrupts to
if (tc) {
netdev_set_num_tc(dev, tc);
adapter->last_lfc_mode = adapter->hw.fc.current_mode;
-
adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
adapter->hw.fc.requested_mode = ixgbe_fc_none;
} else {
netdev_reset_tc(dev);
-
adapter->hw.fc.requested_mode = adapter->last_lfc_mode;
adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
.ndo_stop = ixgbe_close,
.ndo_start_xmit = ixgbe_xmit_frame,
.ndo_select_queue = ixgbe_select_queue,
- .ndo_set_rx_mode = ixgbe_set_rx_mode,
+ .ndo_set_rx_mode = ixgbe_set_rx_mode,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = ixgbe_set_mac,
.ndo_change_mtu = ixgbe_change_mtu,
.ndo_set_vf_mac = ixgbe_ndo_set_vf_mac,
.ndo_set_vf_vlan = ixgbe_ndo_set_vf_vlan,
.ndo_set_vf_tx_rate = ixgbe_ndo_set_vf_bw,
- .ndo_set_vf_spoofchk = ixgbe_ndo_set_vf_spoofchk,
+ .ndo_set_vf_spoofchk = ixgbe_ndo_set_vf_spoofchk,
.ndo_get_vf_config = ixgbe_ndo_get_vf_config,
.ndo_get_stats64 = ixgbe_get_stats64,
.ndo_setup_tc = ixgbe_setup_tc,
}
setup_timer(&adapter->service_timer, &ixgbe_service_timer,
- (unsigned long) adapter);
+ (unsigned long) adapter);
INIT_WORK(&adapter->service_task, ixgbe_service_task);
clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state);
/* reset the hardware with the new settings */
err = hw->mac.ops.start_hw(hw);
-
if (err == IXGBE_ERR_EEPROM_VERSION) {
/* We are running on a pre-production device, log a warning */
e_dev_warn("This device is a pre-production adapter/LOM. "