In xmit, there is a skb_clone. This function copies the struct sk_buff.
And some parameters are changed to the new skb. Then the new skb is sent
while the old skb is freed.
While the function skb_clone is removed, the parameter changes are made on
the old skb, then the old skb is sent. It can also work well.
The following tests are made.
server client
--------- ---------
|1.1.1.1|<----rxe-channel--->|1.1.1.2|
--------- ---------
On server: rping -s -a 1.1.1.1 -v -C 1000 -S 512
On client: rping -c -a 1.1.1.1 -v -C 1000 -S 512
The kernel config CONFIG_DEBUG_KMEMLEAK is enabled on both server
and client.
This test runs for several hours. There is no memory leak and the whole
system can work well.
As the above network, the following tests are made.
Server: ibv_rc_pingpong -d rxe0 -g 1
Client: ibv_rc_pingpong -d rxe0 -g 1 1.1.1.1
The result on Server.
Before:
8192000 bytes in 0.88 seconds = 74.36 Mbit/sec
1000 iters in 0.88 seconds = 881.30 usec/iter
After:
8192000 bytes in 0.81 seconds = 81.15 Mbit/sec
1000 iters in 0.81 seconds = 807.62 usec/iter
The throughput is enhanced and the latency is reduced.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
int rxe_send(struct rxe_dev *rxe, struct rxe_pkt_info *pkt, struct sk_buff *skb)
{
- struct sk_buff *nskb;
struct rxe_av *av;
int err;
av = rxe_get_av(pkt);
- nskb = skb_clone(skb, GFP_ATOMIC);
- if (!nskb)
- return -ENOMEM;
-
- nskb->destructor = rxe_skb_tx_dtor;
- nskb->sk = pkt->qp->sk->sk;
+ skb->destructor = rxe_skb_tx_dtor;
+ skb->sk = pkt->qp->sk->sk;
rxe_add_ref(pkt->qp);
atomic_inc(&pkt->qp->skb_out);
if (av->network_type == RDMA_NETWORK_IPV4) {
- err = ip_local_out(dev_net(skb_dst(skb)->dev), nskb->sk, nskb);
+ err = ip_local_out(dev_net(skb_dst(skb)->dev), skb->sk, skb);
} else if (av->network_type == RDMA_NETWORK_IPV6) {
- err = ip6_local_out(dev_net(skb_dst(skb)->dev), nskb->sk, nskb);
+ err = ip6_local_out(dev_net(skb_dst(skb)->dev), skb->sk, skb);
} else {
pr_err("Unknown layer 3 protocol: %d\n", av->network_type);
atomic_dec(&pkt->qp->skb_out);
rxe_drop_ref(pkt->qp);
- kfree_skb(nskb);
+ kfree_skb(skb);
return -EINVAL;
}
return -EAGAIN;
}
- kfree_skb(skb);
return 0;
}