--- /dev/null
+/*
+ * arch/arm/mm/cache-tauros2.c - Tauros2 L2 cache controller support
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * References:
+ * - PJ1 CPU Core Datasheet,
+ * Document ID MV-S104837-01, Rev 0.7, January 24 2008.
+ * - PJ4 CPU Core Datasheet,
+ * Document ID MV-S105190-00, Rev 0.7, March 14 2008.
+ */
+
+#include <linux/init.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-tauros2.h>
+
+
+/*
+ * When Tauros2 is used on a CPU that supports the v7 hierarchical
+ * cache operations, the cache handling code in proc-v7.S takes care
+ * of everything, including handling DMA coherency.
+ *
+ * So, we only need to register outer cache operations here if we're
+ * being used on a pre-v7 CPU, and we only need to build support for
+ * outer cache operations into the kernel image if the kernel has been
+ * configured to support a pre-v7 CPU.
+ */
+#if __LINUX_ARM_ARCH__ < 7
+/*
+ * Low-level cache maintenance operations.
+ */
+static inline void tauros2_clean_pa(unsigned long addr)
+{
+ __asm__("mcr p15, 1, %0, c7, c11, 3" : : "r" (addr));
+}
+
+static inline void tauros2_clean_inv_pa(unsigned long addr)
+{
+ __asm__("mcr p15, 1, %0, c7, c15, 3" : : "r" (addr));
+}
+
+static inline void tauros2_inv_pa(unsigned long addr)
+{
+ __asm__("mcr p15, 1, %0, c7, c7, 3" : : "r" (addr));
+}
+
+
+/*
+ * Linux primitives.
+ *
+ * Note that the end addresses passed to Linux primitives are
+ * noninclusive.
+ */
+#define CACHE_LINE_SIZE 32
+
+static void tauros2_inv_range(unsigned long start, unsigned long end)
+{
+ /*
+ * Clean and invalidate partial first cache line.
+ */
+ if (start & (CACHE_LINE_SIZE - 1)) {
+ tauros2_clean_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+ start = (start | (CACHE_LINE_SIZE - 1)) + 1;
+ }
+
+ /*
+ * Clean and invalidate partial last cache line.
+ */
+ if (end & (CACHE_LINE_SIZE - 1)) {
+ tauros2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
+ end &= ~(CACHE_LINE_SIZE - 1);
+ }
+
+ /*
+ * Invalidate all full cache lines between 'start' and 'end'.
+ */
+ while (start < end) {
+ tauros2_inv_pa(start);
+ start += CACHE_LINE_SIZE;
+ }
+
+ dsb();
+}
+
+static void tauros2_clean_range(unsigned long start, unsigned long end)
+{
+ start &= ~(CACHE_LINE_SIZE - 1);
+ while (start < end) {
+ tauros2_clean_pa(start);
+ start += CACHE_LINE_SIZE;
+ }
+
+ dsb();
+}
+
+static void tauros2_flush_range(unsigned long start, unsigned long end)
+{
+ start &= ~(CACHE_LINE_SIZE - 1);
+ while (start < end) {
+ tauros2_clean_inv_pa(start);
+ start += CACHE_LINE_SIZE;
+ }
+
+ dsb();
+}
+#endif
+
+static inline u32 __init read_extra_features(void)
+{
+ u32 u;
+
+ __asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (u));
+
+ return u;
+}
+
+static inline void __init write_extra_features(u32 u)
+{
+ __asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
+}
+
+static void __init disable_l2_prefetch(void)
+{
+ u32 u;
+
+ /*
+ * Read the CPU Extra Features register and verify that the
+ * Disable L2 Prefetch bit is set.
+ */
+ u = read_extra_features();
+ if (!(u & 0x01000000)) {
+ printk(KERN_INFO "Tauros2: Disabling L2 prefetch.\n");
+ write_extra_features(u | 0x01000000);
+ }
+}
+
+static inline int __init cpuid_scheme(void)
+{
+ extern int processor_id;
+
+ return !!((processor_id & 0x000f0000) == 0x000f0000);
+}
+
+static inline u32 __init read_mmfr3(void)
+{
+ u32 mmfr3;
+
+ __asm__("mrc p15, 0, %0, c0, c1, 7\n" : "=r" (mmfr3));
+
+ return mmfr3;
+}
+
+static inline u32 __init read_actlr(void)
+{
+ u32 actlr;
+
+ __asm__("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr));
+
+ return actlr;
+}
+
+static inline void __init write_actlr(u32 actlr)
+{
+ __asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr));
+}
+
+void __init tauros2_init(void)
+{
+ extern int processor_id;
+ char *mode;
+
+ disable_l2_prefetch();
+
+#ifdef CONFIG_CPU_32v5
+ if ((processor_id & 0xff0f0000) == 0x56050000) {
+ u32 feat;
+
+ /*
+ * v5 CPUs with Tauros2 have the L2 cache enable bit
+ * located in the CPU Extra Features register.
+ */
+ feat = read_extra_features();
+ if (!(feat & 0x00400000)) {
+ printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+ write_extra_features(feat | 0x00400000);
+ }
+
+ mode = "ARMv5";
+ outer_cache.inv_range = tauros2_inv_range;
+ outer_cache.clean_range = tauros2_clean_range;
+ outer_cache.flush_range = tauros2_flush_range;
+ }
+#endif
+
+#ifdef CONFIG_CPU_32v6
+ /*
+ * Check whether this CPU lacks support for the v7 hierarchical
+ * cache ops. (PJ4 is in its v6 personality mode if the MMFR3
+ * register indicates no support for the v7 hierarchical cache
+ * ops.)
+ */
+ if (cpuid_scheme() && (read_mmfr3() & 0xf) == 0) {
+ /*
+ * When Tauros2 is used in an ARMv6 system, the L2
+ * enable bit is in the ARMv6 ARM-mandated position
+ * (bit [26] of the System Control Register).
+ */
+ if (!(get_cr() & 0x04000000)) {
+ printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+ adjust_cr(0x04000000, 0x04000000);
+ }
+
+ mode = "ARMv6";
+ outer_cache.inv_range = tauros2_inv_range;
+ outer_cache.clean_range = tauros2_clean_range;
+ outer_cache.flush_range = tauros2_flush_range;
+ }
+#endif
+
+#ifdef CONFIG_CPU_32v7
+ /*
+ * Check whether this CPU has support for the v7 hierarchical
+ * cache ops. (PJ4 is in its v7 personality mode if the MMFR3
+ * register indicates support for the v7 hierarchical cache
+ * ops.)
+ *
+ * (Although strictly speaking there may exist CPUs that
+ * implement the v7 cache ops but are only ARMv6 CPUs (due to
+ * not complying with all of the other ARMv7 requirements),
+ * there are no real-life examples of Tauros2 being used on
+ * such CPUs as of yet.)
+ */
+ if (cpuid_scheme() && (read_mmfr3() & 0xf) == 1) {
+ u32 actlr;
+
+ /*
+ * When Tauros2 is used in an ARMv7 system, the L2
+ * enable bit is located in the Auxiliary System Control
+ * Register (which is the only register allowed by the
+ * ARMv7 spec to contain fine-grained cache control bits).
+ */
+ actlr = read_actlr();
+ if (!(actlr & 0x00000002)) {
+ printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+ write_actlr(actlr | 0x00000002);
+ }
+
+ mode = "ARMv7";
+ }
+#endif
+
+ if (mode == NULL) {
+ printk(KERN_CRIT "Tauros2: Unable to detect CPU mode.\n");
+ return;
+ }
+
+ printk(KERN_INFO "Tauros2: L2 cache support initialised "
+ "in %s mode.\n", mode);
+}
projects / openwrt / staging / blogic.git / commitdiff