ath79: add support for TP-Link TL-WDR6500 v2

This ports the TP-Link TL-WDR6500 v2 from ar71xx to ath79.

Specifications:

  SoC: QCA9561
  CPU: 750 MHz
  Flash: 8 MiB (Winbond W25Q64FVSIG)
  RAM: 128 MiB
  WiFi 2.4 GHz: QCA956X 3x3 MIMO 802.11b/g/n
  WiFi 5 GHz: QCA9882-BR4A 2x2 MIMO 802.11a/n/ac
  Ethernet: 4x LAN and 1x WAN (all 100M)
  USB: 1x Header

Flashing instructions:

  As it appears, the device does not support flashing via GUI or
  TFTP, only serial is possible.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Xiaobing Luo <luoxiaobing0926@gmail.com>

diff --git a/target/linux/ath79/dts/qca9561_tplink_tl-wdr6500-v2.dts b/target/linux/ath79/dts/qca9561_tplink_tl-wdr6500-v2.dts
new file mode 100644 (file)
index 0000000..15c5868
--- /dev/null
+++ b/target/linux/ath79/dts/qca9561_tplink_tl-wdr6500-v2.dts
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "tplink,tl-wdr6500-v2", "qca,qca9561";
+       model = "TP-Link TL-WDR6500 v2";
+
+       aliases {
+               led-boot = &led_system;
+               led-failsafe = &led_system;
+               led-running = &led_system;
+               led-upgrade = &led_system;
+               label-mac-device = &eth1;
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "Reset button";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               lan4 {
+                       label = "green:lan4";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               };
+
+               lan3 {
+                       label = "green:lan3";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+
+               lan2 {
+                       label = "green:lan2";
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+               };
+
+               lan1 {
+                       label = "green:lan1";
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+               };
+
+               wan {
+                       label = "green:wan";
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+               };
+
+               led_system: system {
+                       label = "white:system";
+                       gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
+               };
+       };
+};
+
+&spi {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x010000>;
+                               read-only;
+
+                               compatible = "nvmem-cells";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               macaddr_uboot_0fc00: macaddr@0fc00 {
+                                       reg = <0x0fc00 0x6>;
+                               };
+                       };
+
+                       partition@10000 {
+                               compatible = "tplink,firmware";
+                               label = "firmware";
+                               reg = <0x010000 0x7e0000>;
+                       };
+
+                       partition@7f0000 {
+                               label = "art";
+                               reg = <0x7f0000 0x010000>;
+                               read-only;
+
+                               compatible = "nvmem-cells";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               calibration_ath9k: calibration@1000 {
+                                       reg = <0x1000 0x440>;
+                               };
+
+                               calibration_ath10k: calibration@5000 {
+                                       reg = <0x5000 0x844>;
+                               };
+                       };
+               };
+       };
+};
+
+&uart {
+       status = "okay";
+};
+
+&pcie {
+       status = "okay";
+
+       wifi@0,0 {
+               compatible = "qcom,ath10k";
+               reg = <0 0 0 0 0>;
+
+               nvmem-cells = <&macaddr_uboot_0fc00>, <&calibration_ath10k>;
+               nvmem-cell-names = "mac-address", "calibration";
+               mac-address-increment = <(-2)>;
+       };
+};
+
+&mdio0 {
+       status = "okay";
+};
+
+&eth0 {
+       status = "okay";
+
+       phy-handle = <&swphy4>;
+
+       nvmem-cells = <&macaddr_uboot_0fc00>;
+       nvmem-cell-names = "mac-address";
+       mac-address-increment = <1>;
+};
+
+&eth1 {
+       status = "okay";
+
+       nvmem-cells = <&macaddr_uboot_0fc00>;
+       nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+       status = "okay";
+
+       nvmem-cells = <&macaddr_uboot_0fc00>, <&calibration_ath9k>;
+       nvmem-cell-names = "mac-address", "calibration";
+       mac-address-increment = <(-1)>;
+};
+
+&usb0 {
+       status = "okay";
+};
+
+&usb_phy0 {
+       status = "okay";
+};

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 2ee4ed2544d97d5b27bf8135c8fdce27d5adc26a..10c67991fd29ab4ca7adb1a98cde1c2f838649cd 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -30,6 +30,13 @@ tplink,cpe610-v2|\
 tplink,tl-wa1201-v2)
        ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0"
        ;;
+tplink,tl-wdr6500-v2)
+       ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
+       ucidef_set_led_switch "lan1" "LAN1" "green:lan1" "switch0" "0x02"
+       ucidef_set_led_switch "lan2" "LAN2" "green:lan2" "switch0" "0x04"
+       ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x08"
+       ucidef_set_led_switch "lan4" "LAN4" "green:lan4" "switch0" "0x10"
+       ;;
 alfa-network,n2q)
        ucidef_set_led_netdev "lan2" "LAN2" "orange:lan2" "eth1"
        ucidef_set_led_switch "lan1" "LAN1" "orange:lan1" "switch0" "0x10"

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 4f535f8a648e6c3e51cf6f22f358754355b8a6ec..d18eddf5b74ef0b8b25e5d62311ee3c65a79fe5b 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -247,7 +247,8 @@ ath79_setup_interfaces()
        comfast,cf-e560ac|\
        qca,ap143-8m|\
        qca,ap143-16m|\
-       tplink,tl-wr841hp-v3)
+       tplink,tl-wr841hp-v3|\
+       tplink,tl-wdr6500-v2)
                ucidef_set_interface_wan "eth1"
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"

diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index cfabc89b8dfe7d3b0d60e0f793e3198907b1c199..460297e7e997329043e5fe9a5af3250a13abfe21 100644 (file)
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -676,6 +676,22 @@ define Device/tplink_tl-wdr4900-v2
 endef
 TARGET_DEVICES += tplink_tl-wdr4900-v2
 
+define Device/tplink_tl-wdr6500-v2
+  $(Device/tplink-8mlzma)
+  SOC := qca9561
+  DEVICE_MODEL := TL-WDR6500
+  DEVICE_VARIANT := v2
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev \
+       kmod-ath9k kmod-ath10k-ct ath10k-firmware-qca988x-ct
+  IMAGE_SIZE := 8000k
+  KERNEL := kernel-bin | append-dtb | lzma | uImage lzma
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
+  TPLINK_HWID := 0x65000002
+  TPLINK_HEADER_VERSION := 1
+  SUPPORTED_DEVICES += tl-wdr6500-v2
+endef
+TARGET_DEVICES += tplink_tl-wdr6500-v2
+
 define Device/tplink_tl-wdr7500-v3
   $(Device/tplink-8mlzma)
   SOC := qca9558