--- /dev/null
+/*
+ * WRTnode2Q board support
+ *
+ * Copyright (c) 2013 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2015 Kelei <xzmu@wrtnode.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define WRTNODE2Q_GPIO_LED_WLAN 12
+#define WRTNODE2Q_GPIO_LED_WPS 13
+#define WRTNODE2Q_GPIO_LED_STATUS 13
+
+#define WRTNODE2Q_GPIO_LED_WAN 4
+#define WRTNODE2Q_GPIO_LED_LAN1 16
+#define WRTNODE2Q_GPIO_LED_LAN2 15
+#define WRTNODE2Q_GPIO_LED_LAN3 14
+#define WRTNODE2Q_GPIO_LED_LAN4 11
+
+#define WRTNODE2Q_GPIO_BTN_WPS 17
+
+#define WRTNODE2Q_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WRTNODE2Q_KEYS_DEBOUNCE_INTERVAL (3 * WRTNODE2Q_KEYS_POLL_INTERVAL)
+
+#define WRTNODE2Q_MAC0_OFFSET 0
+#define WRTNODE2Q_WMAC_CALDATA_OFFSET 0x1000
+
+static struct gpio_led wrtnode2q_leds_gpio[] __initdata = {
+ {
+ .name = "wrtnode2q:green:status",
+ .gpio = WRTNODE2Q_GPIO_LED_STATUS,
+ .active_low = 1,
+ },
+ {
+ .name = "wrtnode2q:green:wlan",
+ .gpio = WRTNODE2Q_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wrtnode2q_gpio_keys[] __initdata = {
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WRTNODE2Q_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WRTNODE2Q_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+static void __init wrtnode2q_gpio_led_setup(void)
+{
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wrtnode2q_leds_gpio),
+ wrtnode2q_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, WRTNODE2Q_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wrtnode2q_gpio_keys),
+ wrtnode2q_gpio_keys);
+}
+
+static void __init wrtnode2q_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1f040000);
+
+ ath79_register_m25p80(NULL);
+
+ wrtnode2q_gpio_led_setup();
+
+ ath79_register_pci();
+ ath79_register_usb();
+
+ ath79_register_wmac(art + WRTNODE2Q_WMAC_CALDATA_OFFSET, NULL);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + WRTNODE2Q_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, art + WRTNODE2Q_MAC0_OFFSET, 1);
+
+ /* LAN ports */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_WRTNODE2Q, "WRTNODE2Q", "WRTnode2Q board",
+ wrtnode2q_setup);
\ No newline at end of file
qihoo_c301_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
yun_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6464k(rootfs),1280k(kernel),64k(nvram),64k(art),7744k@0x50000(firmware)
yun_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14656k(rootfs),1280k(kernel),64k(nvram),64k(art),15936k@0x50000(firmware)
+wrtnode2q_mtdlayout=mtdparts=spi0.0:192k(u-boot),64k(u-boot-env),64k(art),1472k(kernel),14592k(rootfs),16064k@0x50000(firmware),16384k@0x0(fullflash)
define Image/BuildKernel
cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
$(eval $(call SingleProfile,AthLzma,64k,DR344,dr344,DR344,ttyS0,115200,$$(dr344_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,WPJ531_16M,wpj531-16M,WPJ531,ttyS0,115200,$$(wpj531_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WPJ558_16M,wpj558-16M,WPJ558,ttyS0,115200,$$(wpj558_mtdlayout_16M),KRuImage,65536))
+$(eval $(call SingleProfile,AthLzma,64k,WRTNODE2Q,wrtnode2q,WRTNODE2Q,ttyS0,115200,$$(wrtnode2q_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,YUN_8M,yun-8M,Yun,ttyATH0,250000,$$(yun_mtdlayout_8M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,YUN_16M,yun-16M,Yun,ttyATH0,250000,$$(yun_mtdlayout_16M),RKuImage))
projects / openwrt / staging / stintel.git / commitdiff