mediatek: filogic: add Netcore N60 support
authorChukun Pan <amadeus@jmu.edu.cn>
Fri, 3 Nov 2023 15:02:35 +0000 (23:02 +0800)
committerRafał Miłecki <rafal@milecki.pl>
Mon, 8 Jul 2024 10:00:39 +0000 (12:00 +0200)
Hardware specification:
  SoC: MediaTek MT7986A 4x A53
  Flash: ESMT F50L1G41LB 128MB
  RAM: W632GU6NB DDR3 256MB
  Ethernet: 1x 2.5G + 4x 1G
  WiFi1: MT7975N 2.4GHz 4T4R
  WiFi2: MT7975PN 5GHz 4T4R
  Button: Reset, WPS
  Power: DC 12V 2A

Flash instructions:
  1. Connect to the router using ssh or telnet,
     username: useradmin, password is the web
     login password of the router.
  2. Use scp to upload bl31-uboot.fip and flash:
     "mtd write xxx-preloader.bin spi0.0"
     "mtd write xxx-bl31-uboot.fip FIP"
     "mtd erase ubi"
  3. Connect to the router via the Lan port,
     set a static ip of your PC.
     (ip 192.168.1.254, gateway 192.168.1.1)
  4. Download initramfs image, reboot router,
     waiting for tftp recovery to complete.
  5. After openwrt boots up, perform sysupgrade.

Note:
  1. Back up all mtd partitions before flashing.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit 4ae474afbd023a3386f4276ca8f948a44b49ff1b)

target/linux/mediatek/dts/mt7986a-netcore-n60.dts [new file with mode: 0644]
target/linux/mediatek/filogic/base-files/etc/board.d/02_network
target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
target/linux/mediatek/image/filogic.mk

diff --git a/target/linux/mediatek/dts/mt7986a-netcore-n60.dts b/target/linux/mediatek/dts/mt7986a-netcore-n60.dts
new file mode 100644 (file)
index 0000000..b96b1e2
--- /dev/null
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+       model = "Netcore N60";
+       compatible = "netcore,n60", "mediatek,mt7986a";
+
+       aliases {
+               serial0 = &uart0;
+               label-mac-device = &gmac0;
+               led-boot = &led_status_red;
+               led-failsafe = &led_status_red;
+               led-running = &led_status_blue;
+               led-upgrade = &led_status_blue;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       memory {
+               reg = <0 0x40000000 0 0x10000000>;
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+               };
+
+               mesh {
+                       label = "mesh";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_status_red: status-red {
+                       color = <LED_COLOR_ID_RED>;
+                       function = LED_FUNCTION_STATUS;
+                       gpios = <&pio 29 GPIO_ACTIVE_LOW>;
+               };
+
+               led_status_blue: status-blue {
+                       color = <LED_COLOR_ID_BLUE>;
+                       function = LED_FUNCTION_STATUS;
+                       gpios = <&pio 32 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&crypto {
+       status = "okay";
+};
+
+&eth {
+       status = "okay";
+
+       gmac0: mac@0 {
+               compatible = "mediatek,eth-mac";
+               reg = <0>;
+               phy-mode = "2500base-x";
+
+               nvmem-cells = <&macaddr_lan>;
+               nvmem-cell-names = "mac-address";
+
+               fixed-link {
+                       speed = <2500>;
+                       full-duplex;
+                       pause;
+               };
+       };
+
+       gmac1: mac@1 {
+               compatible = "mediatek,eth-mac";
+               reg = <1>;
+               phy-handle = <&phy6>;
+               phy-mode = "2500base-x";
+
+               nvmem-cells = <&macaddr_wan>;
+               nvmem-cell-names = "mac-address";
+       };
+
+       mdio: mdio-bus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+       };
+};
+
+&mdio {
+       reset-delay-us = <600>;
+       reset-post-delay-us = <20000>;
+       reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+
+       phy6: phy@6 {
+               compatible = "ethernet-phy-ieee802.3-c45";
+               reg = <6>;
+               mxl,led-config = <0x0 0x0 0x0 0x3f0>;
+       };
+
+       switch: switch@1f {
+               compatible = "mediatek,mt7531";
+               reg = <31>;
+               reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+               interrupt-controller;
+               #interrupt-cells = <1>;
+               interrupt-parent = <&pio>;
+               interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+       };
+};
+
+&switch {
+       ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               port@0 {
+                       reg = <0>;
+                       label = "lan1";
+               };
+
+               port@1 {
+                       reg = <1>;
+                       label = "lan2";
+               };
+
+               port@3 {
+                       reg = <3>;
+                       label = "lan3";
+               };
+
+               port@4 {
+                       reg = <4>;
+                       label = "lan4";
+               };
+
+               port@6 {
+                       reg = <6>;
+                       ethernet = <&gmac0>;
+                       phy-mode = "2500base-x";
+
+                       fixed-link {
+                               speed = <2500>;
+                               full-duplex;
+                               pause;
+                       };
+               };
+       };
+};
+
+&spi0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&spi_flash_pins>;
+       status = "okay";
+
+       flash@0 {
+               compatible = "spi-nand";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               reg = <0>;
+
+               spi-max-frequency = <20000000>;
+               spi-tx-bus-width = <4>;
+               spi-rx-bus-width = <4>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "BL2";
+                               reg = <0x0000000 0x0100000>;
+                               read-only;
+                       };
+
+                       partition@100000 {
+                               label = "u-boot-env";
+                               reg = <0x0100000 0x0080000>;
+                       };
+
+                       factory: partition@180000 {
+                               label = "Factory";
+                               reg = <0x0180000 0x0200000>;
+                               read-only;
+                       };
+
+                       partition@380000 {
+                               label = "FIP";
+                               reg = <0x0380000 0x0200000>;
+                               read-only;
+                       };
+
+                       partition@580000 {
+                               label = "ubi";
+                               reg = <0x0580000 0x7280000>;
+                       };
+               };
+       };
+};
+
+&pio {
+       spi_flash_pins: spi-flash-pins-33-to-38 {
+               mux {
+                       function = "spi";
+                       groups = "spi0", "spi0_wp_hold";
+               };
+               conf-pu {
+                       pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
+                       drive-strength = <8>;
+                       mediatek,pull-up-adv = <0>; /* bias-disable */
+               };
+               conf-pd {
+                       pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+                       drive-strength = <8>;
+                       mediatek,pull-down-adv = <0>; /* bias-disable */
+               };
+       };
+
+       wf_2g_5g_pins: wf_2g_5g-pins {
+               mux {
+                       function = "wifi";
+                       groups = "wf_2g", "wf_5g";
+               };
+               conf {
+                       pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+                              "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+                              "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+                              "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+                              "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+                              "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+                              "WF1_TOP_CLK", "WF1_TOP_DATA";
+                       drive-strength = <4>;
+               };
+       };
+};
+
+&trng {
+       status = "okay";
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&watchdog {
+       status = "okay";
+};
+
+&wifi {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&wf_2g_5g_pins>;
+
+       mediatek,mtd-eeprom = <&factory 0x0>;
+};
+
+&factory {
+       nvmem-layout {
+               compatible = "fixed-layout";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               macaddr_lan: macaddr@1fef20 {
+                       reg = <0x1fef20 0x6>;
+               };
+
+               macaddr_wan: macaddr@1fef26 {
+                       reg = <0x1fef26 0x6>;
+               };
+       };
+};
index 7d2cd706a9d6bfa8b1404efd516eaf6d230f50ed..b4d8d0e9aa65e109ef827e48384a1c4d325bcb8d 100644 (file)
@@ -26,6 +26,7 @@ mediatek_setup_interfaces()
        asus,tuf-ax4200|\
        jdcloud,re-cp-03|\
        mediatek,mt7981-rfb|\
+       netcore,n60|\
        unielec,u7981-01*|\
        zbtlink,zbt-z8102ax)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1
index 7cecd82f9f71d0c09d94136194527272085116b3..62bbde6ba810a2f4329a4d441663838232dcd9fe 100644 (file)
@@ -85,7 +85,8 @@ case "$board" in
                [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
                [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
                ;;
-       jcg,q30-pro)
+       jcg,q30-pro|\
+       netcore,n60)
                # Originally, phy1 is phy0 mac with LA bit set. However, this would conflict
                # addresses on multiple VIFs with the other radio. Use label mac to set LA bit.
                [ "$PHYNBR" = "1" ] && macaddr_setbit_la $(get_mac_label) > /sys${DEVPATH}/macaddress
index fb981376fc02733e163e4c3d48d03a76dfda5824..c26b672b1e890c76645392bfd2cda68f12bd5037 100755 (executable)
@@ -124,6 +124,7 @@ platform_do_upgrade() {
        h3c,magic-nx30-pro|\
        jcg,q30-pro|\
        mediatek,mt7981-rfb|\
+       netcore,n60|\
        qihoo,360t7|\
        tplink,tl-xdr4288|\
        tplink,tl-xdr6086|\
index c94aac9681b99acfa4c8cb6e8755b7a431624ee0..83da1bb7892a386208ae4347fc68450b5e2a2903 100644 (file)
@@ -692,6 +692,30 @@ define Device/mercusys_mr90x-v1
 endef
 TARGET_DEVICES += mercusys_mr90x-v1
 
+define Device/netcore_n60
+  DEVICE_VENDOR := Netcore
+  DEVICE_MODEL := N60
+  DEVICE_DTS := mt7986a-netcore-n60
+  DEVICE_DTS_DIR := ../dts
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  KERNEL_IN_UBI := 1
+  UBOOTENV_IN_UBI := 1
+  IMAGES := sysupgrade.itb
+  KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+  KERNEL := kernel-bin | gzip
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+        fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.itb := append-kernel | \
+        fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
+  DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
+  ARTIFACTS := preloader.bin bl31-uboot.fip
+  ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr3
+  ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot netcore_n60
+endef
+TARGET_DEVICES += netcore_n60
+
 define Device/netgear_wax220
   DEVICE_VENDOR := NETGEAR
   DEVICE_MODEL := WAX220