nl80211: advertise device AP SME

Add the ability to advertise that the device
contains the AP SME and what features it can
support. There are currently no features in
the bitmap -- probe response offload will be
advertised by a few patches Arik is working
on now (who took over from Guy Eilam) and a
device with AP SME will typically implement
and require response offload.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index c1d2366704b5d89ad4dbad2b2a90629e10e6c849..81e0031012caa0c7f8ef7033102abe2ec5348d75 100644 (file)
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -1548,7 +1548,8 @@ static int ath6kl_init(struct net_device *dev)
        ar->conf_flags = ATH6KL_CONF_IGNORE_ERP_BARKER |
                         ATH6KL_CONF_ENABLE_11N | ATH6KL_CONF_ENABLE_TX_BURST;
 
-       ar->wdev->wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM;
+       ar->wdev->wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM |
+                                 WIPHY_FLAG_HAVE_AP_SME;
 
        status = ath6kl_target_config_wlan_params(ar);
        if (!status)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 9107adc73e0b00bd9bcc81f85de8cc3245a04d70..ff39e4b234d4a3dcafcc7d6cb89c0037b575d8c7 100644 (file)
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1121,6 +1121,11 @@ enum nl80211_commands {
  *     %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
  *     used for asking the driver to perform a TDLS operation.
  *
+ * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
+ *     that have AP support to indicate that they have the AP SME integrated
+ *     with support for the features listed in this attribute, see
+ *     &enum nl80211_ap_sme_features.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1349,6 +1354,8 @@ enum nl80211_attrs {
        NL80211_ATTR_TDLS_SUPPORT,
        NL80211_ATTR_TDLS_EXTERNAL_SETUP,
 
+       NL80211_ATTR_DEVICE_AP_SME,
+
        /* add attributes here, update the policy in nl80211.c */
 
        __NL80211_ATTR_AFTER_LAST,
@@ -2662,4 +2669,12 @@ enum nl80211_tdls_operation {
        NL80211_TDLS_DISABLE_LINK,
 };
 
+/*
+ * enum nl80211_ap_sme_features - device-integrated AP features
+ * Reserved for future use, no bits are defined in
+ * NL80211_ATTR_DEVICE_AP_SME yet.
+enum nl80211_ap_sme_features {
+};
+ */
+
 #endif /* __LINUX_NL80211_H */

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index ef118e4525893f8a5eccac36f6b31b1be0bf24f9..86d207da6cce8a5f5508511e0d8b4f60fa9d84cb 100644 (file)
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1679,6 +1679,7 @@ struct cfg80211_ops {
  *     teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT
  *     command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be
  *     used for asking the driver/firmware to perform a TDLS operation.
+ * @WIPHY_FLAG_HAVE_AP_SME: device integrates AP SME
  */
 enum wiphy_flags {
        WIPHY_FLAG_CUSTOM_REGULATORY            = BIT(0),
@@ -1697,6 +1698,7 @@ enum wiphy_flags {
        WIPHY_FLAG_AP_UAPSD                     = BIT(14),
        WIPHY_FLAG_SUPPORTS_TDLS                = BIT(15),
        WIPHY_FLAG_TDLS_EXTERNAL_SETUP          = BIT(16),
+       WIPHY_FLAG_HAVE_AP_SME                  = BIT(17),
 };
 
 /**
@@ -1907,6 +1909,8 @@ struct wiphy_wowlan_support {
  *     may request, if implemented.
  *
  * @wowlan: WoWLAN support information
+ *
+ * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features.
  */
 struct wiphy {
        /* assign these fields before you register the wiphy */
@@ -1930,6 +1934,8 @@ struct wiphy {
 
        u32 flags;
 
+       u32 ap_sme_capa;
+
        enum cfg80211_signal_type signal_type;
 
        int bss_priv_size;

diff --git a/net/wireless/core.c b/net/wireless/core.c
index 220f3bd176f89cc33192b72ddcc11f296cba54fd..ccdfed897651bba0a96c6d6111b5067a976457ca 100644 (file)
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -492,6 +492,10 @@ int wiphy_register(struct wiphy *wiphy)
                    !(wiphy->wowlan.flags & WIPHY_WOWLAN_SUPPORTS_GTK_REKEY)))
                return -EINVAL;
 
+       if (WARN_ON(wiphy->ap_sme_capa &&
+                   !(wiphy->flags & WIPHY_FLAG_HAVE_AP_SME)))
+               return -EINVAL;
+
        if (WARN_ON(wiphy->addresses && !wiphy->n_addresses))
                return -EINVAL;
 

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 9910c3cb9a851be49187dffeed4bf4a75b310ded..2094c8468d78ff38b8ca40b9c3bc0c342a118990 100644 (file)
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1007,6 +1007,10 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
        if (nl80211_put_iface_combinations(&dev->wiphy, msg))
                goto nla_put_failure;
 
+       if (dev->wiphy.flags & WIPHY_FLAG_HAVE_AP_SME)
+               NLA_PUT_U32(msg, NL80211_ATTR_DEVICE_AP_SME,
+                           dev->wiphy.ap_sme_capa);
+
        return genlmsg_end(msg, hdr);
 
  nla_put_failure: