u32 intf;
enum p54u_hw_type type;
const char *fw;
- const char *fw_legacy;
char hw[20];
} p54u_fwlist[__NUM_P54U_HWTYPES] = {
{
.type = P54U_NET2280,
.intf = FW_LM86,
.fw = "isl3886usb",
- .fw_legacy = "isl3890usb",
.hw = "ISL3886 + net2280",
},
{
.type = P54U_3887,
.intf = FW_LM87,
.fw = "isl3887usb",
- .fw_legacy = "isl3887usb_bare",
.hw = "ISL3887",
},
};
usb_kill_anchored_urbs(&priv->submitted);
}
+static void p54u_stop(struct ieee80211_hw *dev)
+{
+ /*
+ * TODO: figure out how to reliably stop the 3887 and net2280 so
+ * the hardware is still usable next time we want to start it.
+ * until then, we just stop listening to the hardware..
+ */
+ p54u_free_urbs(dev);
+}
+
static int p54u_init_urbs(struct ieee80211_hw *dev)
{
struct p54u_priv *priv = dev->priv;
return ret;
}
+static int p54u_open(struct ieee80211_hw *dev)
+{
+ /*
+ * TODO: Because we don't know how to reliably stop the 3887 and
+ * the isl3886+net2280, other than brutally cut off all
+ * communications. We have to reinitialize the urbs on every start.
+ */
+ return p54u_init_urbs(dev);
+}
+
static __le32 p54u_lm87_chksum(const __le32 *data, size_t length)
{
u32 chk = 0;
return err;
}
-static int p54u_load_firmware(struct ieee80211_hw *dev)
+static int p54_find_type(struct p54u_priv *priv)
{
- struct p54u_priv *priv = dev->priv;
- int err, i;
-
- BUILD_BUG_ON(ARRAY_SIZE(p54u_fwlist) != __NUM_P54U_HWTYPES);
+ int i;
for (i = 0; i < __NUM_P54U_HWTYPES; i++)
if (p54u_fwlist[i].type == priv->hw_type)
break;
-
if (i == __NUM_P54U_HWTYPES)
return -EOPNOTSUPP;
- err = request_firmware(&priv->fw, p54u_fwlist[i].fw, &priv->udev->dev);
- if (err) {
- dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s "
- "(%d)!\n", p54u_fwlist[i].fw, err);
+ return i;
+}
- err = request_firmware(&priv->fw, p54u_fwlist[i].fw_legacy,
- &priv->udev->dev);
- if (err)
- return err;
- }
+static int p54u_start_ops(struct p54u_priv *priv)
+{
+ struct ieee80211_hw *dev = priv->common.hw;
+ int ret;
- err = p54_parse_firmware(dev, priv->fw);
- if (err)
- goto out;
+ ret = p54_parse_firmware(dev, priv->fw);
+ if (ret)
+ goto err_out;
+
+ ret = p54_find_type(priv);
+ if (ret < 0)
+ goto err_out;
- if (priv->common.fw_interface != p54u_fwlist[i].intf) {
+ if (priv->common.fw_interface != p54u_fwlist[ret].intf) {
dev_err(&priv->udev->dev, "wrong firmware, please get "
"a firmware for \"%s\" and try again.\n",
- p54u_fwlist[i].hw);
- err = -EINVAL;
+ p54u_fwlist[ret].hw);
+ ret = -ENODEV;
+ goto err_out;
}
-out:
- if (err)
- release_firmware(priv->fw);
+ ret = priv->upload_fw(dev);
+ if (ret)
+ goto err_out;
- return err;
+ ret = p54u_open(dev);
+ if (ret)
+ goto err_out;
+
+ ret = p54_read_eeprom(dev);
+ if (ret)
+ goto err_stop;
+
+ p54u_stop(dev);
+
+ ret = p54_register_common(dev, &priv->udev->dev);
+ if (ret)
+ goto err_stop;
+
+ return 0;
+
+err_stop:
+ p54u_stop(dev);
+
+err_out:
+ /*
+ * p54u_disconnect will do the rest of the
+ * cleanup
+ */
+ return ret;
}
-static int p54u_open(struct ieee80211_hw *dev)
+static void p54u_load_firmware_cb(const struct firmware *firmware,
+ void *context)
{
- struct p54u_priv *priv = dev->priv;
+ struct p54u_priv *priv = context;
+ struct usb_device *udev = priv->udev;
int err;
- err = p54u_init_urbs(dev);
- if (err) {
- return err;
+ complete(&priv->fw_wait_load);
+ if (firmware) {
+ priv->fw = firmware;
+ err = p54u_start_ops(priv);
+ } else {
+ err = -ENOENT;
+ dev_err(&udev->dev, "Firmware not found.\n");
}
- priv->common.open = p54u_init_urbs;
+ if (err) {
+ struct device *parent = priv->udev->dev.parent;
- return 0;
+ dev_err(&udev->dev, "failed to initialize device (%d)\n", err);
+
+ if (parent)
+ device_lock(parent);
+
+ device_release_driver(&udev->dev);
+ /*
+ * At this point p54u_disconnect has already freed
+ * the "priv" context. Do not use it anymore!
+ */
+ priv = NULL;
+
+ if (parent)
+ device_unlock(parent);
+ }
+
+ usb_put_dev(udev);
}
-static void p54u_stop(struct ieee80211_hw *dev)
+static int p54u_load_firmware(struct ieee80211_hw *dev,
+ struct usb_interface *intf)
{
- /* TODO: figure out how to reliably stop the 3887 and net2280 so
- the hardware is still usable next time we want to start it.
- until then, we just stop listening to the hardware.. */
- p54u_free_urbs(dev);
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct p54u_priv *priv = dev->priv;
+ struct device *device = &udev->dev;
+ int err, i;
+
+ BUILD_BUG_ON(ARRAY_SIZE(p54u_fwlist) != __NUM_P54U_HWTYPES);
+
+ init_completion(&priv->fw_wait_load);
+ i = p54_find_type(priv);
+ if (i < 0)
+ return i;
+
+ dev_info(&priv->udev->dev, "Loading firmware file %s\n",
+ p54u_fwlist[i].fw);
+
+ usb_get_dev(udev);
+ err = request_firmware_nowait(THIS_MODULE, 1, p54u_fwlist[i].fw,
+ device, GFP_KERNEL, priv,
+ p54u_load_firmware_cb);
+ if (err) {
+ dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s "
+ "(%d)!\n", p54u_fwlist[i].fw, err);
+ }
+
+ return err;
}
static int __devinit p54u_probe(struct usb_interface *intf,
priv->common.tx = p54u_tx_net2280;
priv->upload_fw = p54u_upload_firmware_net2280;
}
- err = p54u_load_firmware(dev);
- if (err)
- goto err_free_dev;
-
- err = priv->upload_fw(dev);
- if (err)
- goto err_free_fw;
-
- p54u_open(dev);
- err = p54_read_eeprom(dev);
- p54u_stop(dev);
- if (err)
- goto err_free_fw;
-
- err = p54_register_common(dev, &udev->dev);
- if (err)
- goto err_free_fw;
-
- return 0;
-
-err_free_fw:
- release_firmware(priv->fw);
-
-err_free_dev:
- p54_free_common(dev);
- usb_set_intfdata(intf, NULL);
- usb_put_dev(udev);
+ err = p54u_load_firmware(dev, intf);
return err;
}
if (!dev)
return;
+ priv = dev->priv;
+ wait_for_completion(&priv->fw_wait_load);
p54_unregister_common(dev);
- priv = dev->priv;
usb_put_dev(interface_to_usbdev(intf));
release_firmware(priv->fw);
p54_free_common(dev);