mediatek: add support for Acer Predator W6

Hardware
--------
SOC:   MediaTek MT7986A
RAM:   1GB DDR4
FLASH: 4GB eMMC
WiFi:  2x2 802.11 b/g/n/ax MT7916 DBDC
       4x4 802.11 a/n/ac/ax MT7986
       2x2 802.11ax MT7986 DBDC
ETH:   4x LAN 1Gbit/s (MT7531)
       1x WAN 2.5Gbit/s (GPY211)
BTN:   RESET, WPS
LED:   Antenna LEDs (GPIO)
       Mood-LED (Kinetic KTD2601) - unsupported
UART:  Header nest to USB port - 3V3 115200 8N1
       [BUTTON] GND - RX - TX [USB]

Installation
------------

1. Connect to the device using serial console.

2. Interrupt the Autoboot process when promted by sending '0' twice.

3. Serve the OpenWrt initramfs image using TFTP at 192.168.1.66. Name
   the image "predator.bin" and conenct the TFTP server to the routers
   LAN port.

4. Configure U-Boot to allow loading unsigned images from MMC

   $ setenv bootcmd 'mmc read 0x40000000 0x00004400 0x0010000;
     fdt addr $(fdtcontroladdr); fdt rm /signature; bootm 0x40000000';
     saveenv

5. Transfer the image from U-Boot

   $ setenv serverip 192.168.1.66; setenv ipaddr 192.168.1.1;
     tftpboot 0x46000000 predator.bin; fdt addr $(fdtcontroladdr);
     fdt rm /signature; bootm

6. Wait for OpenWrt to boot

7. Transfer the OpenWrt sysupgrade image to the router using scp.

8. Install OpenWrt using sysupgrade.

Signed-off-by: David Bauer <mail@david-bauer.net>

diff --git a/target/linux/mediatek/dts/mt7986a-acer-predator-w6.dts b/target/linux/mediatek/dts/mt7986a-acer-predator-w6.dts
new file mode 100644 (file)
index 0000000..35a2c30
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7986a-acer-predator-w6.dts
@@ -0,0 +1,503 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+       model = "Acer Predator W6";
+       compatible = "acer,predator-w6", "mediatek,mt7986a";
+
+       aliases {
+               serial0 = &uart0;
+               led-boot = &led_status;
+               led-failsafe = &led_status;
+               led-running = &led_status;
+               led-upgrade = &led_status;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+               bootargs = "dm-mod.create=\"dm-verity,,,ro,0 31544 verity 1 PARTLABEL=rootfs PARTLABEL=rootfs 4096 4096 3943 3944 sha256 2f969fa9e9e4e20b37746f22633e85b178f5db7c143e11f92733a704299cc933 2dd56e34b15c6c84573cf26c4392028421061d2c808975217b45e9a5b49d2087\" rootfstype=squashfs,ext4 rootwait root=/dev/mmcblk0p6 fstools_ignore_partname=1";
+       };
+
+       memory {
+               reg = <0 0x40000000 0 0x20000000>;
+       };
+
+       reg_1p8v: regulator-1p8v {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-1.8V";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+
+       reg_3p3v: regulator-3p3v {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-3.3V";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+
+       reg_5v: regulator-5v {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-5V";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+
+               factory {
+                       label = "factory";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+               };
+
+               wps {
+                       label = "wps";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_status: led@0 {
+                       label = "ant0:red";
+                       gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led@1 {
+                       label = "ant0:green";
+                       gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led@2 {
+                       label = "ant0:blue";
+                       gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led@3 {
+                       label = "ant1:red";
+                       gpios = <&pio 35 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led@4 {
+                       label = "ant1:green";
+                       gpios = <&pio 34 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led@5 {
+                       label = "ant1:blue";
+                       gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led@6 {
+                       label = "ant2:red";
+                       gpios = <&pio 38 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led@7 {
+                       label = "ant2:green";
+                       gpios = <&pio 37 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led@8 {
+                       label = "ant2:blue";
+                       gpios = <&pio 26 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led@9 {
+                       label = "ant3:red";
+                       gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led@10 {
+                       label = "ant3:green";
+                       gpios = <&pio 24 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led@11 {
+                       label = "ant3:blue";
+                       gpios = <&pio 23 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led@12 {
+                       label = "ant4:red";
+                       gpios = <&pio 28 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led@13 {
+                       label = "ant4:green";
+                       gpios = <&pio 27 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led@14 {
+                       label = "ant4:blue";
+                       gpios = <&pio 32 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led@15 {
+                       label = "ant5:red";
+                       gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led@16 {
+                       label = "ant5:green";
+                       gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led@17 {
+                       label = "ant5:blue";
+                       gpios = <&pio 43 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+       };
+
+};
+
+&eth {
+       status = "okay";
+
+       gmac0: mac@0 {
+               /* LAN */
+               compatible = "mediatek,eth-mac";
+               reg = <0>;
+               phy-mode = "2500base-x";
+
+               fixed-link {
+                       speed = <2500>;
+                       full-duplex;
+                       pause;
+               };
+       };
+
+       gmac1: mac@1 {
+               /* WAN */
+               compatible = "mediatek,eth-mac";
+               reg = <1>;
+               phy-mode = "2500base-x";
+               phy-handle = <&phy6>;
+       };
+
+       mdio: mdio-bus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+       };
+};
+
+&mdio {
+       phy6: phy@6 {
+               compatible = "ethernet-phy-ieee802.3-c45";
+               reg = <6>;
+
+               reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+               reset-assert-us = <10000>;
+               reset-deassert-us = <10000>;
+
+               /* LED0: nc ; LED1: nc ; LED2: Amber ; LED3: Green */
+               mxl,led-config = <0x0 0x0 0x370 0x80>;
+       };
+
+       switch: switch@0 {
+               compatible = "mediatek,mt7531";
+               reg = <31>;
+
+               reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+               reset-assert-us = <10000>;
+               reset-deassert-us = <10000>;
+       };
+};
+
+&pio {
+       mmc0_pins_default: mmc0-pins {
+               mux {
+                       function = "emmc";
+                       groups = "emmc_51";
+               };
+               conf-cmd-dat {
+                       pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+                              "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+                              "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+                       input-enable;
+                       drive-strength = <4>;
+                       mediatek,pull-up-adv = <1>;     /* pull-up 10K */
+               };
+               conf-clk {
+                       pins = "EMMC_CK";
+                       drive-strength = <6>;
+                       mediatek,pull-down-adv = <2>;   /* pull-down 50K */
+               };
+               conf-ds {
+                       pins = "EMMC_DSL";
+                       mediatek,pull-down-adv = <2>;   /* pull-down 50K */
+               };
+               conf-rst {
+                       pins = "EMMC_RSTB";
+                       drive-strength = <4>;
+                       mediatek,pull-up-adv = <1>;     /* pull-up 10K */
+               };
+       };
+
+       mmc0_pins_uhs: mmc0-uhs-pins {
+               mux {
+                       function = "emmc";
+                       groups = "emmc_51";
+               };
+               conf-cmd-dat {
+                       pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+                              "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+                              "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+                       input-enable;
+                       drive-strength = <4>;
+                       mediatek,pull-up-adv = <1>;     /* pull-up 10K */
+               };
+               conf-clk {
+                       pins = "EMMC_CK";
+                       drive-strength = <6>;
+                       mediatek,pull-down-adv = <2>;   /* pull-down 50K */
+               };
+               conf-ds {
+                       pins = "EMMC_DSL";
+                       mediatek,pull-down-adv = <2>;   /* pull-down 50K */
+               };
+               conf-rst {
+                       pins = "EMMC_RSTB";
+                       drive-strength = <4>;
+                       mediatek,pull-up-adv = <1>;     /* pull-up 10K */
+               };
+       };
+
+       pcie_pins: pcie-pins {
+               mux {
+                       function = "pcie";
+                       groups = "pcie_pereset";
+               };
+       };
+
+       wf_2g_5g_pins: wf_2g_5g-pins {
+               mux {
+                       function = "wifi";
+                       groups = "wf_2g", "wf_5g";
+               };
+               conf {
+                       pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+                              "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+                              "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+                              "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+                              "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+                              "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+                              "WF1_TOP_CLK", "WF1_TOP_DATA";
+                       drive-strength = <4>;
+               };
+       };
+
+       wf_dbdc_pins: wf-dbdc-pins {
+               mux {
+                       function = "wifi";
+                       groups = "wf_dbdc";
+               };
+               conf {
+                       pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+                               "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+                               "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+                               "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+                               "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+                               "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+                               "WF1_TOP_CLK", "WF1_TOP_DATA";
+                       drive-strength = <4>;
+               };
+       };
+};
+
+&switch {
+       ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               port@0 {
+                       reg = <0>;
+                       label = "game";
+               };
+
+               port@1 {
+                       reg = <1>;
+                       label = "lan1";
+               };
+
+               port@2 {
+                       reg = <2>;
+                       label = "lan2";
+               };
+
+               port@3 {
+                       reg = <3>;
+                       label = "lan3";
+               };
+
+               port@6 {
+                       reg = <6>;
+                       label = "cpu";
+                       ethernet = <&gmac0>;
+                       phy-mode = "2500base-x";
+
+                       fixed-link {
+                               speed = <2500>;
+                               full-duplex;
+                               pause;
+                       };
+               };
+       };
+
+       mdio {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               phy@0 {
+                       reg = <0>;
+
+                       mediatek,led-config = <
+                               0x21 0x8009 /* BASIC_CTRL */
+                               0x22 0x0c00 /* ON_DURATION */
+                               0x23 0x1400 /* BLINK_DURATION */
+                               0x24 0xc001 /* LED0_ON_CTRL */
+                               0x25 0x0000 /* LED0_BLINK_CTRL */
+                               0x26 0xc007 /* LED1_ON_CTRL */
+                               0x27 0x003f /* LED1_BLINK_CTRL */
+                       >;
+               };
+
+               phy@1 {
+                       reg = <1>;
+
+                       mediatek,led-config = <
+                               0x21 0x8009 /* BASIC_CTRL */
+                               0x22 0x0c00 /* ON_DURATION */
+                               0x23 0x1400 /* BLINK_DURATION */
+                               0x24 0xc001 /* LED0_ON_CTRL */
+                               0x25 0x0000 /* LED0_BLINK_CTRL */
+                               0x26 0xc007 /* LED1_ON_CTRL */
+                               0x27 0x003f /* LED1_BLINK_CTRL */
+                       >;
+               };
+
+               phy@2 {
+                       reg = <2>;
+
+                       mediatek,led-config = <
+                               0x21 0x8009 /* BASIC_CTRL */
+                               0x22 0x0c00 /* ON_DURATION */
+                               0x23 0x1400 /* BLINK_DURATION */
+                               0x24 0xc001 /* LED0_ON_CTRL */
+                               0x25 0x0000 /* LED0_BLINK_CTRL */
+                               0x26 0xc007 /* LED1_ON_CTRL */
+                               0x27 0x003f /* LED1_BLINK_CTRL */
+                       >;
+               };
+
+               phy@3 {
+                       reg = <3>;
+
+                       mediatek,led-config = <
+                               0x21 0x8009 /* BASIC_CTRL */
+                               0x22 0x0c00 /* ON_DURATION */
+                               0x23 0x1400 /* BLINK_DURATION */
+                               0x24 0xc001 /* LED0_ON_CTRL */
+                               0x25 0x0000 /* LED0_BLINK_CTRL */
+                               0x26 0xc007 /* LED1_ON_CTRL */
+                               0x27 0x003f /* LED1_BLINK_CTRL */
+                       >;
+               };
+       };
+};
+
+&wifi {
+       status = "okay";
+       pinctrl-names = "default", "dbdc";
+       pinctrl-0 = <&wf_2g_5g_pins>;
+       pinctrl-1 = <&wf_dbdc_pins>;
+};
+
+&trng {
+       status = "okay";
+};
+
+&watchdog {
+       status = "okay";
+};
+
+&crypto {
+       status = "okay";
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&ssusb {
+       vusb33-supply = <&reg_3p3v>;
+       vbus-supply = <&reg_5v>;
+       status = "okay";
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+&mmc0 {
+       status = "okay";
+       pinctrl-names = "default", "state_uhs";
+       pinctrl-0 = <&mmc0_pins_default>;
+       pinctrl-1 = <&mmc0_pins_uhs>;
+       bus-width = <0x08>;
+       max-frequency = <200000000>;
+       cap-mmc-highspeed;
+       mmc-hs200-1_8v;
+       mmc-hs400-1_8v;
+       hs400-ds-delay = <0x14014>;
+       vmmc-supply = <&reg_3p3v>;
+       vqmmc-supply = <&reg_1p8v>;
+       non-removable;
+       no-sd;
+       no-sdio;
+};
+
+&pcie {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pcie_pins>;
+       status = "okay";
+};
+
+&pcie_phy {
+       status = "okay";
+};

diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
index 3b170ddc1885fc97a08d5603140320c55321d8cc..2ce5fb687b67e5d038f8e17fd15cd82c37a398e9 100644 (file)
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -8,6 +8,9 @@ mediatek_setup_interfaces()
        local board="$1"
 
        case $board in
+       acer,predator-w6)
+               ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 game" eth1
+               ;;
        asus,tuf-ax4200)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1
                ;;

diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata
index 0fe4c6998870cf84ec52efc960750d6248528a3d..c3d7c099740546a355e090e5be21787ff475edb8 100644 (file)
--- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata
+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata
@@ -7,6 +7,20 @@
 board=$(board_name)
 
 case "$FIRMWARE" in
+"mediatek/mt7916_eeprom.bin")
+       case "$board" in
+       acer,predator-w6)
+               caldata_extract_mmc "factory" 0xA0000 0x1000
+               ;;
+       esac
+       ;;
+"mediatek/mt7986_eeprom_mt7976.bin")
+       case "$board" in
+       acer,predator-w6)
+               caldata_extract_mmc "factory" 0x0 0x1000
+               ;;
+       esac
+       ;;
 "mediatek/mt7986_eeprom_mt7976_dbdc.bin")
        case "$board" in
        asus,tuf-ax4200)

diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
index 3620e3a6fbc032fc5d442bba8a55fe5af750e094..ebf76640c876ec92dad204a8b43f05f011e177aa 100644 (file)
--- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
@@ -10,6 +10,12 @@ PHYNBR=${DEVPATH##*/phy}
 board=$(board_name)
 
 case "$board" in
+       acer,predator-w6)
+               key_path="/var/qcidata/data"
+               [ "$PHYNBR" = "0" ] && cat $key_path/2gMAC > /sys${DEVPATH}/macaddress
+               [ "$PHYNBR" = "1" ] && cat $key_path/6gMAC > /sys${DEVPATH}/macaddress
+               [ "$PHYNBR" = "2" ] && cat $key_path/5gMAC > /sys${DEVPATH}/macaddress
+               ;;
        asus,tuf-ax4200)
                CI_UBIPART="UBI_DEV"
                addr=$(mtd_get_mac_binary_ubi "Factory" 0x4)

diff --git a/target/linux/mediatek/filogic/base-files/lib/preinit/05_extract_factory_data.sh b/target/linux/mediatek/filogic/base-files/lib/preinit/05_extract_factory_data.sh
new file mode 100644 (file)
index 0000000..87287a7
--- /dev/null
+++ b/target/linux/mediatek/filogic/base-files/lib/preinit/05_extract_factory_data.sh
@@ -0,0 +1,25 @@
+. /lib/functions/system.sh
+
+predator_w6_factory_extract() {
+       local mmc_part
+
+       mmc_part="$(find_mmc_part qcidata)"
+
+       mkdir -p /var/qcidata/data
+       mkdir -p /var/qcidata/mount
+
+       mount -r "$mmc_part" /var/qcidata/mount
+
+       cp /var/qcidata/mount/factory/*MAC "/var/qcidata/data/"
+       umount "/var/qcidata/mount"
+}
+
+preinit_extract_factory() {
+       case $(board_name) in
+       acer,predator-w6)
+               predator_w6_factory_extract
+               ;;
+       esac
+}
+
+boot_hook_add preinit_main preinit_extract_factory

diff --git a/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh b/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh
index cfddd9cedcccc53128b359d13c49ff98030e9355..4136c486ae2278828568e775faa07f1ea6a1f599 100644 (file)
--- a/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh
+++ b/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh
@@ -2,6 +2,14 @@
 
 preinit_set_mac_address() {
        case $(board_name) in
+       acer,predator-w6)
+               key_path="/var/qcidata/data"
+               ip link set dev lan1 address "$(cat $key_path/LANMAC)"
+               ip link set dev lan2 address "$(cat $key_path/LANMAC)"
+               ip link set dev lan3 address "$(cat $key_path/LANMAC)"
+               ip link set dev lan4 address "$(cat $key_path/LANMAC)"
+               ip link set dev eth1 address "$(cat $key_path/WANMAC)"
+               ;;
        asus,tuf-ax4200)
                CI_UBIPART="UBI_DEV"
                addr=$(mtd_get_mac_binary_ubi "Factory" 0x4)

diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
index 186abfa5a8d82e66d4c14893f80d2cfb26d54328..2b58cf2b43b434c4789b0abb70d910d88b52893e 100755 (executable)
--- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
@@ -42,6 +42,11 @@ platform_do_upgrade() {
        local board=$(board_name)
 
        case "$board" in
+       acer,predator-w6)
+               CI_KERNPART="kernel"
+               CI_ROOTPART="rootfs"
+               emmc_do_upgrade "$1"
+               ;;
        asus,tuf-ax4200)
                CI_UBIPART="UBI_DEV"
                CI_KERNPART="linux"

diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
index c41cba3a642dced705d7f5f28304e67da3fa5163..643435235d27b91cce29874b98ef1edba286b20f 100644 (file)
--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -98,6 +98,21 @@ define Device/asus_tuf-ax4200
 endef
 TARGET_DEVICES += asus_tuf-ax4200
 
+define Device/acer_predator-w6
+  DEVICE_VENDOR := Acer
+  DEVICE_MODEL := Predator W6
+  DEVICE_DTS := mt7986a-acer-predator-w6
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_DTS_LOADADDR := 0x47000000
+  DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware kmod-mt7916-firmware mt7986-wo-firmware
+  IMAGES := sysupgrade.bin
+  KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+       fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += acer_predator-w6
+
 define Device/bananapi_bpi-r3
   DEVICE_VENDOR := Bananapi
   DEVICE_MODEL := BPi-R3