ath79: disable default build for devices with 4M flash

It has been decided that the 19.07 release will be last one to include
4/32 devices.

This disables default build for the remaining devices with 4M flash
on ath79. Note that this will leave exactly one enabled device for
ath79/tiny subtarget, PQI Air-Pen, which was moved there due to
kernel size restrictions.

All 4M TP-Link devices have already been disabled in
8819faff47ff ("ath79: do not build TP-Link tiny images by default")

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

diff --git a/target/linux/ath79/image/tiny-netgear.mk b/target/linux/ath79/image/tiny-netgear.mk
index 0127e5bd97c411349cdbfa5b1027da960659b815..8561f91ab8c5732efb141b94477339f1b2349bcb 100644 (file)
--- a/target/linux/ath79/image/tiny-netgear.mk
+++ b/target/linux/ath79/image/tiny-netgear.mk
@@ -10,6 +10,7 @@ define Device/netgear_wnr612-v2
   NETGEAR_BOARD_ID := REALWNR612V2
   IMAGE_SIZE := 3712k
   SUPPORTED_DEVICES += wnr612-v2
+  DEFAULT := n
 endef
 TARGET_DEVICES += netgear_wnr612-v2
 
@@ -22,6 +23,7 @@ define Device/on_n150r
   NETGEAR_BOARD_ID := N150R
   IMAGE_SIZE := 3712k
   SUPPORTED_DEVICES += n150r
+  DEFAULT := n
 endef
 TARGET_DEVICES += on_n150r
 
@@ -35,6 +37,7 @@ define Device/netgear_wnr1000-v2
   NETGEAR_HW_ID := 29763331+4+32
   IMAGE_SIZE := 3712k
   SUPPORTED_DEVICES += wnr1000-v2
+  DEFAULT := n
 endef
 TARGET_DEVICES += netgear_wnr1000-v2
 
@@ -51,5 +54,6 @@ define Device/netgear_wnr2000-v3
   IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | \
        check-size
   SUPPORTED_DEVICES += wnr2000-v3
+  DEFAULT := n
 endef
 TARGET_DEVICES += netgear_wnr2000-v3