define Package/base-files-network
SECTION:=base
CATEGORY:=Base system
+ DEPENDS:=@!USE_NETIFD
TITLE:=Network scripts for the OpenWrt base system
URL:=http://openwrt.org/
VERSION:=$(PKG_RELEASE)
define Package/base-files
SECTION:=base
CATEGORY:=Base system
- DEPENDS:=+base-files-network
+ DEPENDS:=+!USE_NETIFD:base-files-network +USE_NETIFD:netifd
TITLE:=Base filesystem for OpenWrt
URL:=http://openwrt.org/
VERSION:=$(PKG_RELEASE)-$(REVISION)
This package contains a base filesystem and system scripts for OpenWrt.
endef
+define Package/base-files/config
+ config USE_NETIFD
+ bool "Use netifd instead of the old network init scripts (experimental!)"
+ default n
+endef
define Package/gcc/Default
SECTION:=libs
--- /dev/null
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=netifd
+PKG_VERSION:=2011-10-21
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=git://nbd.name/luci2/netifd.git
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE_VERSION:=986c4a1434cc61d2de560690ecc0d532a157d40a
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_MD5SUM:=627677df83aa7844f72caa8ad4f7eea9
+# CMAKE_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/cmake.mk
+
+define Package/netifd
+ SECTION:=base
+ CATEGORY:=Base system
+ DEPENDS:=+libubus +ubus +ubusd @USE_NETIFD
+ TITLE:=OpenWrt Network Interface Configuration Daemon
+endef
+
+TARGET_CFLAGS += \
+ -I$(STAGING_DIR)/usr/include \
+ -I$(STAGING_DIR)/usr/include/libnl-tiny
+
+CMAKE_OPTIONS += \
+ -DLIBNL_LIBS=-lnl-tiny \
+ -DDEBUG=1
+
+define Package/netifd/install
+ $(INSTALL_DIR) $(1)/sbin
+ $(INSTALL_BIN) $(PKG_BUILD_DIR)/netifd $(1)/sbin/
+ $(CP) ./files/* $(1)/
+ $(CP) $(PKG_BUILD_DIR)/dummy/netifd-proto.sh $(1)/lib/netifd/
+endef
+
+$(eval $(call BuildPackage,netifd))
--- /dev/null
+[ ifup = "$ACTION" ] && {
+ uci_toggle_state network "$INTERFACE" up 1
+ uci_toggle_state network "$INTERFACE" connect_time $(sed -ne 's![^0-9].*$!!p' /proc/uptime)
+ [ -n "$DEVICE" ] && uci_toggle_state network "$INTERFACE" ifname "$DEVICE"
+}
--- /dev/null
+#!/bin/sh /etc/rc.common
+START=20
+PIDFILE=/var/run/netifd.pid
+
+start() {
+ stop
+ start-stop-daemon -S -b -m -p $PIDFILE -x /sbin/netifd
+}
+
+reload() {
+ ubus call network reload
+}
+
+stop() {
+ [ -e "$PIDFILE" ] || return
+ start-stop-daemon -K -p $PIDFILE -x /sbin/netifd
+ rm -f "$PIDFILE"
+}
--- /dev/null
+#!/bin/sh /etc/rc.common
+START=40
+STOP=90
+
+start() {
+ setup_switch() { return 0; }
+
+ include /lib/network
+ setup_switch
+
+ ubus call network reload
+}
+
+restart() {
+ start
+}
+
+stop() {
+ /sbin/ifdown -a
+}
--- /dev/null
+#!/bin/sh
+[ -z "$1" ] && echo "Error: should be run by udhcpc" && exit 1
+
+. /etc/functions.sh
+. /lib/netifd/netifd-proto.sh
+
+set_classless_routes() {
+ local max=128
+ local type
+ while [ -n "$1" -a -n "$2" -a $max -gt 0 ]; do
+ proto_add_ipv4_route "${1%%/*}" "${1##*/}" "$2"
+ max=$(($max-1))
+ shift 2
+ done
+}
+
+setup_interface () {
+ proto_init_update "*" 1
+ proto_add_ipv4_address "$ip" "${subnet:-255.255.255.0}"
+ # TODO: apply $broadcast
+
+ for i in $router; do
+ proto_add_ipv4_route 0.0.0.0 0 "$i"
+ done
+
+ # CIDR STATIC ROUTES (rfc3442)
+ [ -n "$staticroutes" ] && set_classless_routes $staticroutes
+ [ -n "$msstaticroutes" ] && set_classless_routes $msstaticroutes
+
+ for dns in $dns; do
+ proto_add_dns_server "$dns"
+ done
+ for domain in $domain; do
+ proto_add_dns_search "$domain"
+ done
+ proto_send_update "$INTERFACE"
+
+ # TODO
+ # [ -n "$ntpsrv" ] && change_state network "$ifc" lease_ntpsrv "$ntpsrv"
+ # [ -n "$timesvr" ] && change_state network "$ifc" lease_timesrv "$timesvr"
+ # [ -n "$hostname" ] && change_state network "$ifc" lease_hostname "$hostname"
+ # [ -n "$timezone" ] && change_state network "$ifc" lease_timezone "$timezone"
+}
+
+deconfig_interface() {
+ proto_init_update "*" 0
+ proto_send_update "$INTERFACE"
+}
+
+case "$1" in
+ deconfig)
+ deconfig_interface
+ ;;
+ renew|bound)
+ setup_interface
+ ;;
+esac
+
+exit 0
--- /dev/null
+#!/bin/sh
+PPP_IPPARAM="$6"
+
+. /lib/netifd/netifd-proto.sh
+proto_init_update "$IFNAME" 0
+proto_send_update "$PPP_IPPARAM"
--- /dev/null
+#!/bin/sh
+PPP_IPPARAM="$6"
+
+. /lib/netifd/netifd-proto.sh
+proto_init_update "$IFNAME" 1 1
+[ -n "$PPP_IPPARAM" ] && {
+ [
+ [ -n "$IPLOCAL" ] && proto_add_ipv4_address "$IPREMOTE" 32
+ [ -n "$IPREMOTE" ] && proto_add_ipv4_route 0.0.0.0 0 "$IPREMOTE"
+ [ -n "$LLLOCAL" ] && proto_add_ipv6_address "$LLLOCAL" 128
+ [ -n "$LLREMOTE" ] && proto_add_ipv6_route "::0" 0 "$LLREMOTE"
+ [ -n "$DNS1" ] && proto_add_dns_server "$DNS1"
+ [ -n "$DNS2" -a "$DNS1" != "$DNS2" ] && proto_add_dns_server "$DNS2"
+}
+proto_send_update "$PPP_IPPARAM"
+
--- /dev/null
+#!/bin/sh
+
+. /etc/functions.sh
+. ../netifd-proto.sh
+init_proto "$@"
+
+dhcp_init_config() {
+ proto_config_add_string "ipaddr"
+ proto_config_add_string "netmask"
+ proto_config_add_string "hostname"
+ proto_config_add_string "clientid"
+ proto_config_add_string "vendorid"
+ proto_config_add_boolean "broadcast"
+ proto_config_add_string "reqopts"
+}
+
+dhcp_setup() {
+ local config="$1"
+ local iface="$2"
+
+ json_get_var ipaddr ipaddr
+ json_get_var hostname hostname
+ json_get_var clientid clientid
+ json_get_var vendorid vendorid
+ json_get_var broadcast broadcast
+ json_get_var reqopts reqopts
+
+ local opt dhcpopts
+ for opt in $reqopts; do
+ append dhcpopts "-O opt"
+ done
+
+ [ "$broadcast" = 1 ] && broadcast="-O broadcast" || broadcast=
+
+ proto_export "INTERFACE=$config"
+ proto_run_command "$config" udhcpc \
+ -p /var/run/udhcpc-$iface.pid \
+ -s /lib/netifd/dhcp.script \
+ -f -t 0 -i "$iface" \
+ ${ipaddr:+-r $ipaddr} \
+ ${hostname:+-H $hostname} \
+ ${clientid:+-c $clientid} \
+ ${vendorid:+-V $vendorid} \
+ $broadcast $dhcpopts
+}
+
+dhcp_teardown() {
+ proto_kill_command
+}
+
+dhcp_init() {
+ return
+}
+
+add_protocol dhcp
+
--- /dev/null
+#!/bin/sh
+
+[ -x /usr/sbin/pppd ] || exit 0
+
+[ -n "$INCLUDE_ONLY" ] || {
+ . /etc/functions.sh
+ . ../netifd-proto.sh
+ init_proto "$@"
+}
+
+ppp_generic_init_config() {
+ proto_config_add_string "username"
+ proto_config_add_string "password"
+ proto_config_add_string "keepalive"
+ proto_config_add_int "demand"
+ proto_config_add_string "pppd_options"
+ proto_config_add_string "connect"
+ proto_config_add_string "disconnect"
+ proto_config_add_boolean "defaultroute"
+ proto_config_add_boolean "peerdns"
+ proto_config_add_boolean "ipv6"
+ proto_config_add_int "mtu"
+}
+
+ppp_generic_setup() {
+ local config="$1"; shift
+
+ json_get_var ipv6 ipv6
+ [ "$ipv6" = 1 ] || ipv6=""
+
+ json_get_var peerdns peerdns
+ [ "$peerdns" = 0 ] && peerdns="" || peerdns="1"
+
+ json_get_var defaultroute defaultroute
+ if [ "$defaultroute" = 1 ]; then
+ defaultroute="defaultroute replacedefaultroute";
+ else
+ defaultroute="nodefaultroute"
+ fi
+
+ json_get_var demand demand
+ if [ "${demand:-0}" -gt 0 ]; then
+ demand="precompiled-active-filter /etc/ppp/filter demand idle $demand"
+ else
+ demand="persist"
+ fi
+
+ [ -n "$mtu" ] || json_get_var mtu mtu
+
+ json_get_var keepalive keepalive
+ local interval="${keepalive##*[, ]}"
+ [ "$interval" != "$keepalive" ] || interval=5
+
+ json_get_var username username
+ json_get_var password password
+
+ json_get_var connect connect
+ json_get_var disconnect disconnect
+ json_get_var pppd_options pppd_options
+
+ proto_run_command "$config" /usr/sbin/pppd \
+ nodetach ipparam "$config" \
+ ifname "${proto:-ppp}-$config" \
+ ${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive%%[, ]*}} \
+ ${ipv6:++ipv6} $defaultroute \
+ ${peerdns:+usepeerdns} \
+ $demand maxfail 1 \
+ ${username:+user "$username" password "$password"} \
+ ${connect:+connect "$connect"} \
+ ${disconnect:+disconnect "$disconnect"} \
+ ip-up-script /lib/netifd/ppp-up \
+ ipv6-up-script /lib/netifd/ppp-up \
+ ip-down-script /lib/netifd/ppp-down \
+ ipv6-down-script /lib/netifd/ppp-down \
+ ${mtu:+mtu $mtu mru $mtu} \
+ $pppd_options "$@"
+}
+
+ppp_generic_teardown() {
+ local interface="$1"
+
+ case "$ERROR" in
+ 11|19)
+ proto_notify_error "$interface" AUTH_FAILED
+ proto_block_restart "$interface"
+ ;;
+ esac
+ proto_kill_command "$interface"
+}
+
+# PPP on serial device
+
+ppp_init_config() {
+ proto_config_add_string "device"
+ ppp_generic_init_config
+ no_device=1
+}
+
+ppp_setup() {
+ local config="$1"
+
+ json_get_var device device
+ ppp_generic_setup "$config" "$device"
+}
+
+ppp_teardown() {
+ ppp_generic_teardown "$@"
+}
+
+ppp_init() {
+ return
+}
+
+pppoe_init_config() {
+ ppp_generic_init_config
+ proto_config_add_string "ac"
+ proto_config_add_string "service"
+}
+
+pppoe_setup() {
+ local config="$1"
+ local iface="$2"
+
+ for module in slhc ppp_generic pppox pppoe; do
+ /sbin/insmod $module 2>&- >&-
+ done
+
+ json_get_var mtu mtu
+ mtu="${mtu:-1492}"
+
+ json_get_var ac ac
+ json_get_var service service
+
+ ppp_generic_setup "$config" \
+ plugin rp-pppoe.so \
+ ${ac:+rp_pppoe_ac "$ac"} \
+ ${service:+rp_pppoe_service "$service"} \
+ "nic-$iface"
+}
+
+pppoe_teardown() {
+ ppp_generic_teardown "$@"
+}
+
+pppoe_init() {
+ return
+}
+
+pppoa_init_config() {
+ ppp_generic_init_config
+ proto_config_add_int "atmdev"
+ proto_config_add_int "vci"
+ proto_config_add_int "vpi"
+ proto_config_add_string "encaps"
+}
+
+pppoa_setup() {
+ local config="$1"
+ local iface="$2"
+
+ for module in slhc ppp_generic pppox pppoatm; do
+ /sbin/insmod $module 2>&- >&-
+ done
+
+ json_get_var atmdev atmdev
+ json_get_var vci vci
+ json_get_var vpi vpi
+
+ json_get_var encaps encaps
+ case "$encaps" in
+ 1|vc) encaps="vc-encaps" ;;
+ *) encaps="llc-encaps" ;;
+ esac
+
+ ppp_generic_setup "$config" \
+ plugin pppoatm.so \
+ ${atmdev:+$atmdev.}${vpi:-8}.${vci:-35} \
+ ${encaps}
+}
+
+pppoa_teardown() {
+ ppp_generic_teardown "$@"
+}
+
+pppoa_init() {
+ return
+}
+
+[ -n "$INCLUDE_ONLY" ] || {
+ add_protocol ppp
+ [ -f /usr/lib/pppd/*/rp-pppoe.so ] && add_protocol pppoe
+ [ -f /usr/lib/pppd/*/pppoatm.so ] && add_protocol pppoa
+}
+
--- /dev/null
+#!/bin/sh
+# Copyright (C) 2011 OpenWrt.org
+
+. /usr/share/libubox/jshn.sh
+
+find_config() {
+ return
+}
+
+unbridge() {
+ return
+}
+
+ubus_call() {
+ json_init
+ local _data="$(ubus call "$1" "$2")"
+ [ $? -ne 0 ] && return "$?"
+ json_load "$_data"
+ return 0
+}
+
+
+fixup_interface() {
+ local config="$1"
+ local ifname
+
+ config_get type "$config" type
+ config_get ifname "$config" ifname
+ [ "bridge" = "$type" ] && ifname="br-$config"
+ config_set "$config" device "$ifname"
+ ubus_call "network.interface.$config" status
+ json_get_var l3dev l3_device
+ [ -n "$l3dev" ] && ifname="$l3dev"
+ json_init
+ config_set "$config" ifname "$ifname"
+}
+
+scan_interfaces() {
+ config_load network
+ config_foreach fixup_interface interface
+}
+
+setup_interface() {
+ local iface="$1"
+ local config="$2"
+
+ [ -n "$config" ] || return 0
+ ubus call network.interface."$config" add_device "{ \"name\": \"$iface\" }"
+}
+
--- /dev/null
+ifup
\ No newline at end of file
--- /dev/null
+#!/bin/sh
+
+case "$0" in
+ *ifdown) modes=down;;
+ *ifup) modes="down up";;
+ *) echo "Invalid command: $0";;
+esac
+
+if_call() {
+ local interface="$1"
+ for mode in $modes; do
+ ubus call $interface $mode
+ done
+}
+
+[[ "$1" == "-a" ]] && {
+ for interface in `ubus -S list 'network.interface.*'`; do
+ if_call "$interface"
+ done
+ exit
+}
+
+ubus -S list "network.interface.$1" > /dev/null || {
+ echo "Interface $1 not found"
+ exit
+}
+if_call "network.interface.$1"
projects / openwrt / staging / chunkeey.git / commitdiff